[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000"

View: New views

9 Messages — Rating Filter: Alert me

	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 RPM Package: argyllcms-1.0.4-2mdv2010.0 Summary: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Classification: Mandriva Linux Product: Mandriva Linux Version: Cooker Platform: x86_64 OS/Version: Linux Status: NEW Severity: normal Priority: normal Component: Core Packages AssignedTo: fcrozat@... ReportedBy: curtis.h.news@... QAContact: bugs@... Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #1 from Curtis H <curtis.h.news@...> 2009-10-29 06:10:28 CEST --- Created an attachment (id=15642) --> (https://qa.mandriva.com/attachment.cgi?id=15642) working output on 2009.1 The same command works on 2009.1 using argyllcms-1.0.3-3mdv ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #2 from Frederic Crozat <fcrozat@...> 2009-10-30 21:43:58 CEST --- please test with argyllcms 1.0.4-2mdv, I think it will fix your issue ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #3 from Curtis H <curtis.h.news@...> 2009-10-31 05:27:32 CEST --- I should have explained better. I tested on 1.0.4-1mdv and 1.0.4-2mdv with the same results. thanks for looking into it. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #4 from Frederic Crozat <fcrozat@...> 2009-11-02 15:04:43 CEST --- does it works fine with upstream binary tarball for 1.0.4 ? could you try the following : -unplug the device -run udevadm monitor --env >udev.log -plug the device -kill udevadm attach the log to this bug report. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #5 from Curtis H <curtis.h.news@...> 2009-11-02 17:19:04 CEST --- Created an attachment (id=15685) --> (https://qa.mandriva.com/attachment.cgi?id=15685) udevadm output while pluggin in ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #6 from Curtis H <curtis.h.news@...> 2009-11-02 18:04:12 CEST --- The upstream binary tarball worked. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #7 from Frederic Crozat <fcrozat@...> 2009-11-02 19:12:10 CEST --- hmm, I think it is because we are using an unpatched libusb (compared to the one shipped by argyllcms author) because the patch was causing issues with other USB devices. However, we switched to libusb 1.0.x which is supposed to be more stable but I guess argyllcms doesn't support it yet. I'll ask upstream. In the mean time, I suggest you use argyllcms tarball :( ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #8 from Curtis H <curtis.h.news@...> 2009-11-03 18:22:57 CEST --- FYI, a similar "communications error" comes up with LProf. It must be the same issue. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.

	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 RPM Package: argyllcms-1.0.4-2mdv2010.0 Summary: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Classification: Mandriva Linux Product: Mandriva Linux Version: Cooker Platform: x86_64 OS/Version: Linux Status: NEW Severity: normal Priority: normal Component: Core Packages AssignedTo: fcrozat@... ReportedBy: curtis.h.news@... QAContact: bugs@... Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #1 from Curtis H <curtis.h.news@...> 2009-10-29 06:10:28 CEST --- Created an attachment (id=15642) --> (https://qa.mandriva.com/attachment.cgi?id=15642) working output on 2009.1 The same command works on 2009.1 using argyllcms-1.0.3-3mdv ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #2 from Frederic Crozat <fcrozat@...> 2009-10-30 21:43:58 CEST --- please test with argyllcms 1.0.4-2mdv, I think it will fix your issue ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #3 from Curtis H <curtis.h.news@...> 2009-10-31 05:27:32 CEST --- I should have explained better. I tested on 1.0.4-1mdv and 1.0.4-2mdv with the same results. thanks for looking into it. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #4 from Frederic Crozat <fcrozat@...> 2009-11-02 15:04:43 CEST --- does it works fine with upstream binary tarball for 1.0.4 ? could you try the following : -unplug the device -run udevadm monitor --env >udev.log -plug the device -kill udevadm attach the log to this bug report. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #5 from Curtis H <curtis.h.news@...> 2009-11-02 17:19:04 CEST --- Created an attachment (id=15685) --> (https://qa.mandriva.com/attachment.cgi?id=15685) udevadm output while pluggin in ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #6 from Curtis H <curtis.h.news@...> 2009-11-02 18:04:12 CEST --- The upstream binary tarball worked. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #7 from Frederic Crozat <fcrozat@...> 2009-11-02 19:12:10 CEST --- hmm, I think it is because we are using an unpatched libusb (compared to the one shipped by argyllcms author) because the patch was causing issues with other USB devices. However, we switched to libusb 1.0.x which is supposed to be more stable but I guess argyllcms doesn't support it yet. I'll ask upstream. In the mean time, I suggest you use argyllcms tarball :( ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
	[Bug 54977] argyllcms, NEW: dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" by Bugzilla from bugzilla@qa.mandrivalinux.com :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message https://qa.mandriva.com/show_bug.cgi?id=54977 Summary : dispcal fails with "spyd2: Get Reading failed with ICOM err 0x2000" Product : Mandriva Linux Component : Core Packages Version : Cooker RPM Package: argyllcms-1.0.4-2mdv2010.0 Status : NEW Severity : normal Priority : normal Assigned To: fcrozat@... Reported By: curtis.h.news@... --- Comment #8 from Curtis H <curtis.h.news@...> 2009-11-03 18:22:57 CEST --- FYI, a similar "communications error" comes up with LProf. It must be the same issue. ---------------------------------------------------------------------------- Original Bug Text: Description of problem: I'm trying to color profile my display using argyllcms and a Spyder2 profiler. I recently installed Cooker and it gave the same results yesterday with argyllcms-1.0.4-1mdv2010.0. The Spyder2 is plugged into the back of my computer (no USB hub). lspcidrake output: unknown : ColorVision Inc.\|ColorVision Monitor Spyder (vendor:085c device:0200) In harddrake2, it's put in the scanners category. Here's the console output: ~]# dispcal -qm -yl -b135 -t5500 -v -D -g2.2 -p0.9,0.2,1.75 20091027-nec Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Got EDID for display Setting up the instrument usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_check_and_add() called with VID 0x4b4, PID 0x6560 usb_check_and_add() called with VID 0x46d, PID 0x8ce usb_check_and_add() called with VID 0x4b8, PID 0x11e usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_check_and_add() called with VID 0x85c, PID 0x200 usb_check_and_add() found known instrument spyd2: About to init coms spyd2: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (ColorVision Spyder2)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok spyd2: init coms has suceeded spyd2: About to init instrument spyd2: Instrument reset Reset complete, ICOM err 0x0 spyd2: Get Status Get Status returns 3 ICOM err 0x0 spyd2: Get Status Get Status returns 1 ICOM err 0x0 spyd2: about to read all the EEProm values spyd2: all EEProm read OK spyd2: about to download the PLD pattern spyd2: Get Status Get Status returns 0 ICOM err 0x0 spyd2: PLD pattern downloaded spyd2: instrument inited OK Instrument Type: Spyder 2 Serial Number: 00458832 Hardwar version: 0x0307 Opened display OK Opening window dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_get_ramdac called Getting gamma using Randr 1.2 Place instrument on test window. Hit Esc, ^C or Q to give up, any other key to continue: Display type is LCD Target white = 5500.000000 degrees kelvin Daylight spectrum Target white brightness = 135.000000 cd/m^2 Target black brightness = native brightness Target advertised gamma = 2.200000 Display adjustment menu: Press 1 .. 7 1) Black level (CRT: Offset/Brightness) 2) White point (Color temperature, R,G,B, Gain/Contrast) 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight) 4) Black point (R,G,B, Offset/Brightness) 5) Check all 6) Measure and set ambient for viewing condition adjustment 7) Continue on to calibration 8) Exit Doing some initial measurements About to read patch 0 dispwin_set_color called dispwin_set_ramdac called Setting gamma using Randr 1.2 spyd2: about to get a reading spyd2: Get Reading failed with ICOM err 0x2000 read_sample returned 'Communications failure' (Communications failure) Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: The instrument can be removed from the screen. icoms: delete called icoms: closing port usb_close_port() called usb port has been released and closed dispwin_set_ramdac called Setting gamma using Randr 1.2 dispwin_del called dispwin_set_ramdac called Setting gamma using Randr 1.2 Restored original ramdac About to close display finished dispcal: Error - display read failed with 'User Aborted' [root@Emil ~]# -- Configure bugmail: https://qa.mandriva.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.