Loongson2F has built-in DDR2 and PCIX controller. The PCIX controller
have a similar programming interface with FPGA northbridge used in
Loongson2E.
The main differences between loongson-2e and loongson-2f include:
1. loongson-2f has an extra address windows configuration module, which
can be used to map CPU address space to DDR or PCI address space, or map
the PCI-DMA address space to DDR or LIO address space.
2. loongson-2f support 8 levels of software configurable cpu frequency,
which can be configured via a register(LOONGSON_CHIPCFG0). the coming
cpufreq and standby support are based on this feature.
herein, the module and the corresponding operations are abstracted to
loongson.h.
besides, the other loongson2f-specific source code are added here,
including gcc 4.4 support, pci memory space, pci io space, dma address.
Signed-off-by: Wu Zhangjin <
wuzhangjin@...>
---
arch/mips/Kconfig | 18 ++++
arch/mips/Makefile | 2 +
.../mips/include/asm/mach-loongson/dma-coherence.h | 4 +
arch/mips/include/asm/mach-loongson/loongson.h | 84 +++++++++++++++++++-
arch/mips/include/asm/mach-loongson/mem.h | 27 +++++--
arch/mips/include/asm/mach-loongson/pci.h | 28 ++++++-
arch/mips/loongson/common/bonito-irq.c | 5 +-
arch/mips/loongson/common/init.c | 8 ++
arch/mips/loongson/common/mem.c | 17 ++++
arch/mips/loongson/common/pci.c | 8 ++
10 files changed, 189 insertions(+), 12 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 68d2e46..d00c953 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1059,6 +1059,21 @@ config CPU_LOONGSON2E
The Loongson 2E processor implements the MIPS III instruction set
with many extensions.
+ It has an internal FPGA northbridge, which is compatiable to
+ bonito64.
+
+config CPU_LOONGSON2F
+ bool "Loongson 2F"
+ depends on SYS_HAS_CPU_LOONGSON2F
+ select CPU_LOONGSON2
+ help
+ The Loongson 2F processor implements the MIPS III instruction set
+ with many extensions.
+
+ Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
+ have a similar programming interface with FPGA northbridge used in
+ Loongson2E.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1303,6 +1318,9 @@ config CPU_LOONGSON2
config SYS_HAS_CPU_LOONGSON2E
bool
+config SYS_HAS_CPU_LOONGSON2F
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ba04782..47ecded 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -125,6 +125,8 @@ cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap
cflags-$(CONFIG_CPU_LOONGSON2E) += \
$(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+ $(call cc-option,-march=loongson2f,-march=r4600)
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index 71a6851..981c75f 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
+#else
return dma_addr & 0x7fffffff;
+#endif
}
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index e4818b6..e7e7a08 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin <
wuzj@...>
*
* This program is free software; you can redistribute it and/or modify it
@@ -219,4 +219,86 @@ extern void mach_irq_dispatch(unsigned int pending);
#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+/* Chip Config */
+#ifdef CONFIG_CPU_LOONGSON2F
+#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+#endif
+
+/*
+ * address windows configuration module
+ *
+ * loongson2e do not have this module
+ */
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+
+/* address window config module base address */
+#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul
+#define LOONGSON_ADDRWINCFG_SIZE 0x180
+
+extern unsigned long _loongson_addrwincfg_base;
+#define LOONGSON_ADDRWINCFG(offset) \
+ (*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
+
+#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00)
+#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08)
+#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10)
+#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18)
+
+#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20)
+#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28)
+#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30)
+#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38)
+
+#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40)
+#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48)
+#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50)
+#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58)
+
+#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60)
+#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68)
+#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70)
+#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78)
+
+#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80)
+#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88)
+#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90)
+#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98)
+
+#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0)
+#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8)
+#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0)
+#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8)
+
+#define ADDRWIN_WIN0 0
+#define ADDRWIN_WIN1 1
+#define ADDRWIN_WIN2 2
+#define ADDRWIN_WIN3 3
+
+#define ADDRWIN_MAP_DST_DDR 0
+#define ADDRWIN_MAP_DST_PCI 1
+#define ADDRWIN_MAP_DST_LIO 1
+
+/*
+ * s: CPU, PCIDMA
+ * d: DDR, PCI, LIO
+ * win: 0, 1, 2, 3
+ * src: map source
+ * dst: map destination
+ * size: ~mask + 1
+ */
+#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
+ s##_WIN##w##_BASE = (src); \
+ s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+ s##_WIN##w##_MASK = ~(size-1); \
+} while (0)
+
+#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
+#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
+#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
+ LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
+
+#endif /* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */
+
#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
index bd7b3cb..e9960f3 100644
--- a/arch/mips/include/asm/mach-loongson/mem.h
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin <
wuzj@...>
*
* This program is free software; you can redistribute it and/or modify it
@@ -12,19 +12,30 @@
#define __ASM_MACH_LOONGSON_MEM_H
/*
- * On Lemote Loongson 2e
+ * high memory space
*
- * the high memory space starts from 512M.
- * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G 256M
*/
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START 0x20000000
+#else
+#define LOONGSON_HIGHMEM_START 0x90000000
+#endif
-#ifdef CONFIG_LEMOTE_FULOONG2E
-
-#define LOONGSON_HIGHMEM_START 0x20000000
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
#define LOONGSON_MMIO_MEM_START 0x10000000
-#define LOONGSON_MMIO_MEM_END 0x20000000
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END 0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END 0x80000000
#endif
#endif /* __ASM_MACH_LOONGSON_MEM_H */
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index 576487c..31ba908 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2008 Zhang Le <
r0bertz@...>
+ * Copyright (c) 2009 Wu Zhangjin <
wuzj@...>
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
@@ -24,7 +25,30 @@
extern struct pci_ops loongson_pci_ops;
-#ifdef CONFIG_LEMOTE_FULOONG2E
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START 0x00004000UL
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */
+#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */
+
+#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \
+ LOONGSON_PCI_MEM_START + 1)
+
+#else /* loongson2f/32bit & loongson2e */
/* this pci memory space is mapped by pcimap in pci.c */
#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE
@@ -32,6 +56,6 @@ extern struct pci_ops loongson_pci_ops;
/* this is an offset from mips_io_port_base */
#define LOONGSON_PCI_IO_START 0x00004000UL
-#endif
+#endif /* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/
#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index a1cbd11..2dc2a4c 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -12,6 +12,7 @@
* option) any later version.
*/
#include <linux/interrupt.h>
+#include <linux/compiler.h>
#include <loongson.h>
@@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = {
.unmask = bonito_irq_enable,
};
-static struct irqaction dma_timeout_irqaction = {
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
.handler = no_action,
.name = "dma_timeout",
};
@@ -47,5 +48,7 @@ void bonito_irq_init(void)
for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
+#ifdef CONFIG_CPU_LOONGSON2E
setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
}
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index 3b1dbc1..743d357 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -12,12 +12,20 @@
#include <loongson.h>
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
void __init prom_init(void)
{
/* init base address of io space */
set_io_port_base((unsigned long)
ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ _loongson_addrwincfg_base = (unsigned long)
+ ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
+
prom_init_cmdline();
prom_init_env();
prom_init_memory();
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index 47a20de..45991af 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -21,6 +21,23 @@ void __init prom_init_memory(void)
add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
20), BOOT_MEM_RESERVED);
#ifdef CONFIG_64BIT
+#ifdef CONFIG_CPU_LOONGSON2F
+ {
+ int bit;
+
+ bit = fls(memsize + highmemsize);
+ if (bit != ffs(memsize + highmemsize))
+ bit += 20;
+ else
+ bit = bit + 20 - 1;
+
+ /* set cpu window3 to map CPU to DDR: 2G -> 2G */
+ LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+ 0x80000000ul, (1 << bit));
+ mmiowb();
+ }
+#endif /* CONFIG_CPU_LOONGSON2F */
+
if (highmemsize > 0)
add_memory_region(LOONGSON_HIGHMEM_START,
highmemsize << 20, BOOT_MEM_RAM);
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index a7eb8b9..eac43b8 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -67,6 +67,14 @@ static void __init setup_pcimap(void)
/* can not change gnt to break pci transfer when device's gnt not
deassert for some broken device */
LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+ /*
+ * set cpu addr window2 to map CPU address space to PCI address space
+ */
+ LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+ LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
}
static int __init pcibios_init(void)
--
1.6.2.1
