[Patch]nm-moderm-probe.c: add two VID and indicate usbif 0 is modem port

[spark-4]

Some parts of this message have been removed. Learn more about Nabble's security policy.

 

Add two VID to indicate usbif 0 is modem port to support 3.5G data cards of BANDRICH and PIRELLI

 

--- nm-modem-probe.c 2009-04-08 18:46:21.000000000 +0800

+++ patched/nm-modem-probe.c       2009-10-13 19:35:18.000000000 +0800

@@ -32,6 +32,8 @@

 

 #define HUAWEI_VENDOR_ID   0x12D1

 #define SIERRA_VENDOR_ID   0x1199

+#define BANDRICH_VENDOR_ID 0x1A8D

+#define PIRELLI_VENDOR_ID  0x1266

 

 #define MODEM_CAP_GSM         0x0001 /* GSM */

 #define MODEM_CAP_IS707_A     0x0002 /* CDMA Circuit Switched Data */

@@ -549,6 +551,20 @@

               goto exit;

       }

 

+      if (vid == BANDRICH_VENDOR_ID && usbif != 0) {

+              verbose ("(%s) ignoring BANDRICH USB interface #1", device);

+              if (export)

+                      printf ("ID_NM_MODEM_PROBED=1\n");

+              goto exit;

+      }

+

+      if (vid == PIRELLI_VENDOR_ID && usbif != 0) {

+              verbose ("(%s) ignoring PIRELLI USB interface #1", device);

+              if (export)

+                      printf ("ID_NM_MODEM_PROBED=1\n");

+              goto exit;

+      }

+

       verbose ("probing %s", device);

 

       /* If a delay was specified, retry opening the serial port for that

 

_______________________________________________
NetworkManager-list mailing list
NetworkManager-list@...
http://mail.gnome.org/mailman/listinfo/networkmanager-list

[Dan Williams]

On Wed, 2009-10-14 at 16:28 +0800, spark wrote:
>  
>
> Add two VID to indicate usbif 0 is modem port to support 3.5G data
> cards of BANDRICH and PIRELLI

Hi!

Could you give me a few more details about the Bandrich parts?  The only
reason that USB interface > 0 was ignored for Huawei parts was that the
Huawei firmware become confused when the host tried to talk to it on
more than one AT command channel at a time (which is completely broken
and should be fixed in the firmware).

I would hope that the Bandrich parts do not have that limitation?  None
of the other device's I've encountered have that limitation (Sierra,
Option, Novatel, ZTE, Pantech, Qualcom Gobi, Sony-Ericsson, CMOtech,
etc).

Any chance you could indicate which Bandrich and Pirelli parts had
problems probing the secondary ports?

Dan

>  
>
> --- nm-modem-probe.c 2009-04-08 18:46:21.000000000 +0800
>
> +++ patched/nm-modem-probe.c       2009-10-13 19:35:18.000000000 +0800
>
> @@ -32,6 +32,8 @@
>
>  
>
>  #define HUAWEI_VENDOR_ID   0x12D1
>
>  #define SIERRA_VENDOR_ID   0x1199
>
> +#define BANDRICH_VENDOR_ID 0x1A8D
>
> +#define PIRELLI_VENDOR_ID  0x1266
>
>  
>
>  #define MODEM_CAP_GSM         0x0001 /* GSM */
>
>  #define MODEM_CAP_IS707_A     0x0002 /* CDMA Circuit Switched Data */
>
> @@ -549,6 +551,20 @@
>
>                goto exit;
>
>        }
>
>  
>
> +      if (vid == BANDRICH_VENDOR_ID && usbif != 0) {
>
> +              verbose ("(%s) ignoring BANDRICH USB interface #1",
> device);
>
> +              if (export)
>
> +                      printf ("ID_NM_MODEM_PROBED=1\n");
>
> +              goto exit;
>
> +      }
>
> +
>
> +      if (vid == PIRELLI_VENDOR_ID && usbif != 0) {
>
> +              verbose ("(%s) ignoring PIRELLI USB interface #1",
> device);
>
> +              if (export)
>
> +                      printf ("ID_NM_MODEM_PROBED=1\n");
>
> +              goto exit;
>
> +      }
>
> +
>
>        verbose ("probing %s", device);
>
>  
>
>        /* If a delay was specified, retry opening the serial port for
> that
>
>  
>
>
> _______________________________________________
> NetworkManager-list mailing list
> NetworkManager-list@...
> http://mail.gnome.org/mailman/listinfo/networkmanager-list

_______________________________________________
NetworkManager-list mailing list
NetworkManager-list@...
http://mail.gnome.org/mailman/listinfo/networkmanager-list