[VOTE] Benson Margulies for committer

[dkulp]

Benson has been working with CXF for several months now.   He has the
javascript grant thing that we are still getting pushed through.  
(Hopefully James and I can finish that up today)   He's been doing a lot
of work with the Aegis binding (which is great cause few of the rest of
us have much expertise there).   He's dug into the tooling.  Dug into
the simple frontends.   He's made proposals (and then submitted a patch)
to allow spring config in the tools.   He's also dug into our build
system a bit to fix the eclipse setup.   He's been discussing his ideas
on the mail list as well as asking for guidance when he stumbles across
a problem.   To me, he's shown he's an excellent engineer and can
quickly grasp our code (maybe that shows we have good code ;-) and what
needs to be done.  

[ ] +1 - Make him a committer now
[ ] 0
[ ] -1  - Still needs a bit more work

--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
daniel.kulp@...
http://www.dankulp.com/blog

[Paibir, Ajay]

+1

Ajay

> -----Original Message-----
> From: Daniel Kulp [mailto:dkulp@...]
> Sent: 21 September 2007 14:57
> To: cxf-dev@...
> Subject: [VOTE] Benson Margulies for committer
>
>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been
> doing a lot
> of work with the Aegis binding (which is great cause few of
> the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then
> submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing
> his ideas
> on the mail list as well as asking for guidance when he
> stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code
> ;-) and what needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

----------------------------
IONA Technologies PLC (registered in Ireland)
Registered Number: 171387
Registered Address: The IONA Building, Shelbourne Road, Dublin 4, Ireland

[gnodet]

+1

On 9/21/07, Daniel Kulp <dkulp@...> wrote:

>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

--
Cheers,
Guillaume Nodet
------------------------
Blog: http://gnodet.blogspot.com/

[jgenender]

+1

Guillaume Nodet wrote:

> +1
>
> On 9/21/07, Daniel Kulp <dkulp@...> wrote:
>> Benson has been working with CXF for several months now.   He has the
>> javascript grant thing that we are still getting pushed through.
>> (Hopefully James and I can finish that up today)   He's been doing a lot
>> of work with the Aegis binding (which is great cause few of the rest of
>> us have much expertise there).   He's dug into the tooling.  Dug into
>> the simple frontends.   He's made proposals (and then submitted a patch)
>> to allow spring config in the tools.   He's also dug into our build
>> system a bit to fix the eclipse setup.   He's been discussing his ideas
>> on the mail list as well as asking for guidance when he stumbles across
>> a problem.   To me, he's shown he's an excellent engineer and can
>> quickly grasp our code (maybe that shows we have good code ;-) and what
>> needs to be done.
>>
>> [ ] +1 - Make him a committer now
>> [ ] 0
>> [ ] -1  - Still needs a bit more work
>>
>> --
>> J. Daniel Kulp
>> Principal Engineer
>> IONA
>> P: 781-902-8727    C: 508-380-7194
>> daniel.kulp@...
>> http://www.dankulp.com/blog
>>
>
>

[peterjones]

+1 also.

Cheers,
Peter

On Fri, Sep 21, 2007 at 09:57:28AM -0400, Daniel Kulp wrote:

>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog

--
Peter Jones
IONA Technologies
E-Mail: mailto:peter.jones@...
Tel: [phone] x321 | Fax: [phone]
570 Newfoundland Drive, St. John's, NL, Canada A1A 5B1

[Ulhas Bhole]

[X] +1 - Make him a committer now


-- Ulhas Bhole

Daniel Kulp wrote:

> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
>  

----------------------------
IONA Technologies PLC (registered in Ireland)
Registered Number: 171387
Registered Address: The IONA Building, Shelbourne Road, Dublin 4, Ireland

[James, Steven]

Not sure yet if this is the best mail group to ask this question but
it's a start.

We have been looking at cfx as a general service infastructure but have
a need for CORBA support. I see on the website that it is mentioned. Is
this implimented currently, if not then then could we impliment this
feature if yes whats the process overview?


Best Regards,

Steve


This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

[Willem2]

This is my +1.

Willem.

-----Original Message-----
From: Daniel Kulp [mailto:dkulp@...]
Sent: Fri 9/21/2007 21:57
To: cxf-dev@...
Subject: [VOTE] Benson Margulies for committer
 

Benson has been working with CXF for several months now.   He has the
javascript grant thing that we are still getting pushed through.  
(Hopefully James and I can finish that up today)   He's been doing a lot
of work with the Aegis binding (which is great cause few of the rest of
us have much expertise there).   He's dug into the tooling.  Dug into
the simple frontends.   He's made proposals (and then submitted a patch)
to allow spring config in the tools.   He's also dug into our build
system a bit to fix the eclipse setup.   He's been discussing his ideas
on the mail list as well as asking for guidance when he stumbles across
a problem.   To me, he's shown he's an excellent engineer and can
quickly grasp our code (maybe that shows we have good code ;-) and what
needs to be done.  

[ ] +1 - Make him a committer now
[ ] 0
[ ] -1  - Still needs a bit more work

--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
daniel.kulp@...
http://www.dankulp.com/blog

[Lin, Bozhong (Bo)]

+1

-----Original Message-----
From: Daniel Kulp [mailto:dkulp@...]
Sent: Fri 9/21/2007 9:57 AM
To: cxf-dev@...
Subject: [VOTE] Benson Margulies for committer
 

Benson has been working with CXF for several months now.   He has the
javascript grant thing that we are still getting pushed through.  
(Hopefully James and I can finish that up today)   He's been doing a lot
of work with the Aegis binding (which is great cause few of the rest of
us have much expertise there).   He's dug into the tooling.  Dug into
the simple frontends.   He's made proposals (and then submitted a patch)
to allow spring config in the tools.   He's also dug into our build
system a bit to fix the eclipse setup.   He's been discussing his ideas
on the mail list as well as asking for guidance when he stumbles across
a problem.   To me, he's shown he's an excellent engineer and can
quickly grasp our code (maybe that shows we have good code ;-) and what
needs to be done.  

[ ] +1 - Make him a committer now
[ ] 0
[ ] -1  - Still needs a bit more work

--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
daniel.kulp@...
http://www.dankulp.com/blog

[Jarek Gawor-2]

+1

Jarek

On 9/21/07, Daniel Kulp <dkulp@...> wrote:

>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

[dkulp]

Steve,

On Friday 21 September 2007, James, Steven wrote:
> Not sure yet if this is the best mail group to ask this question but
> it's a start.

I'm CCing the yoko-dev group.   They have written plugins into CXF (and
some idl <-> wsdl tooling) that allow some level of CORBA support.  
Using the CXF JAX-WS api's, you can expose a service as a CORBA service
or use the CXF clients to talk to a CORBA service.  I don't know the
full details of what is and is not supported.  You'd have to ask them or
check their docs/website/wiki.

That said, a discussion has been started to move those plugins from Yoko
to CXF directly.   Thus, there is a strong possibility that the support
will be part of a future version of CXF.  

> We have been looking at cfx as a general service infastructure but
> have a need for CORBA support. I see on the website that it is
> mentioned. Is this implimented currently, if not then then could we
> impliment this feature if yes whats the process overview?

If you'd like to get involved, I'd definitely suggest starting by looking
at Yoko.  Start with that, fix issues, propose enhancements, etc....

Thanks!
Dan

>
> Best Regards,
>
> Steve
>
>
> This e-mail and any attachment is for authorised use by the intended
> recipient(s) only. It may contain proprietary material, confidential
> information and/or be subject to legal privilege. It should not be
> copied, disclosed to, retained or used by, any other party. If you are
> not an intended recipient then please promptly delete this e-mail and
> any attachment and all copies and inform the sender. Thank you.

--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
daniel.kulp@...
http://www.dankulp.com/blog

[James.Strachan]

+1

On 21/09/2007, Daniel Kulp <dkulp@...> wrote:

>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

--
James
-------
http://macstrac.blogspot.com/

Open Source SOA
http://open.iona.com

[James, Steven]

Thanks dan i have already been playing with yoko. I will have a look
there then let you now what the situation is and what we can do if this
is not complete. I am quite willing to open our solution if it is
wanted.

Thanks again for your help.  

Steve

-----Original Message-----
From: Daniel Kulp [mailto:dkulp@...]
Sent: Freitag, 21. September 2007 16:53
To: cxf-dev@...
Cc: James, Steven; yoko-dev@...
Subject: Re: CORBA Question

Steve,

On Friday 21 September 2007, James, Steven wrote:
> Not sure yet if this is the best mail group to ask this question but
> it's a start.

I'm CCing the yoko-dev group.   They have written plugins into CXF (and
some idl <-> wsdl tooling) that allow some level of CORBA support.  
Using the CXF JAX-WS api's, you can expose a service as a CORBA service
or use the CXF clients to talk to a CORBA service.  I don't know the
full details of what is and is not supported.  You'd have to ask them or
check their docs/website/wiki.

That said, a discussion has been started to move those plugins from Yoko

to CXF directly.   Thus, there is a strong possibility that the support
will be part of a future version of CXF.  

> We have been looking at cfx as a general service infastructure but
> have a need for CORBA support. I see on the website that it is
> mentioned. Is this implimented currently, if not then then could we
> impliment this feature if yes whats the process overview?

If you'd like to get involved, I'd definitely suggest starting by
looking at Yoko.  Start with that, fix issues, propose enhancements,
etc....

Thanks!
Dan

>
> Best Regards,
>
> Steve
>
>
> This e-mail and any attachment is for authorised use by the intended
> recipient(s) only. It may contain proprietary material, confidential
> information and/or be subject to legal privilege. It should not be
> copied, disclosed to, retained or used by, any other party. If you are

> not an intended recipient then please promptly delete this e-mail and
> any attachment and all copies and inform the sender. Thank you.



--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
daniel.kulp@...
http://www.dankulp.com/blog

[Dan Diephouse-2]

Daniel Kulp wrote:

> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
>  

+1

--
Dan Diephouse
MuleSource
http://mulesource.com | http://netzooid.com/blog

[kayteeem]

+1

dkulp wrote:

Benson has been working with CXF for several months now.   He has the
javascript grant thing that we are still getting pushed through.  
(Hopefully James and I can finish that up today)   He's been doing a lot
of work with the Aegis binding (which is great cause few of the rest of
us have much expertise there).   He's dug into the tooling.  Dug into
the simple frontends.   He's made proposals (and then submitted a patch)
to allow spring config in the tools.   He's also dug into our build
system a bit to fix the eclipse setup.   He's been discussing his ideas
on the mail list as well as asking for guidance when he stumbles across
a problem.   To me, he's shown he's an excellent engineer and can
quickly grasp our code (maybe that shows we have good code ;-) and what
needs to be done.  

[ ] +1 - Make him a committer now
[ ] 0
[ ] -1  - Still needs a bit more work

--
J. Daniel Kulp
Principal Engineer
IONA
P: 781-902-8727    C: 508-380-7194
[e-mail]
http://www.dankulp.com/blog

[Freeman Fang-2]

+1

Freeman

Daniel Kulp wrote:

> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
>  

[Jim Ma-3]

+1

Daniel Kulp wrote:

> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
>  

[James Mao]

+1

James


Daniel Kulp wrote:

> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been doing a lot
> of work with the Aegis binding (which is great cause few of the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing his ideas
> on the mail list as well as asking for guidance when he stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
>  

[Liu, Jervis]

+1

> -----Original Message-----
> From: Daniel Kulp [mailto:dkulp@...]
> Sent: 2007年9月21日 21:57
> To: cxf-dev@...
> Subject: [VOTE] Benson Margulies for committer
>
>
>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been
> doing a lot
> of work with the Aegis binding (which is great cause few of
> the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then
> submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing
> his ideas
> on the mail list as well as asking for guidance when he
> stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code
> ;-) and what
> needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

----------------------------
IONA Technologies PLC (registered in Ireland)
Registered Number: 171387
Registered Address: The IONA Building, Shelbourne Road, Dublin 4, Ireland

[Eoghan Glynn-2]

+1

> -----Original Message-----
> From: Daniel Kulp [mailto:dkulp@...]
> Sent: 21 September 2007 14:57
> To: cxf-dev@...
> Subject: [VOTE] Benson Margulies for committer
>
>
> Benson has been working with CXF for several months now.   He has the
> javascript grant thing that we are still getting pushed through.  
> (Hopefully James and I can finish that up today)   He's been
> doing a lot
> of work with the Aegis binding (which is great cause few of
> the rest of
> us have much expertise there).   He's dug into the tooling.  Dug into
> the simple frontends.   He's made proposals (and then
> submitted a patch)
> to allow spring config in the tools.   He's also dug into our build
> system a bit to fix the eclipse setup.   He's been discussing
> his ideas
> on the mail list as well as asking for guidance when he
> stumbles across
> a problem.   To me, he's shown he's an excellent engineer and can
> quickly grasp our code (maybe that shows we have good code
> ;-) and what needs to be done.  
>
> [ ] +1 - Make him a committer now
> [ ] 0
> [ ] -1  - Still needs a bit more work
>
> --
> J. Daniel Kulp
> Principal Engineer
> IONA
> P: 781-902-8727    C: 508-380-7194
> daniel.kulp@...
> http://www.dankulp.com/blog
>

----------------------------
IONA Technologies PLC (registered in Ireland)
Registered Number: 171387
Registered Address: The IONA Building, Shelbourne Road, Dublin 4, Ireland