[jira] Created: (MILYN-205) Upload all config XSDs to the website.

Upload all config XSDs to the website.
--------------------------------------

                 Key: MILYN-205
                 URL: http://jira.codehaus.org/browse/MILYN-205
             Project: Milyn
          Issue Type: Task
            Reporter: Tom Fennelly
            Assignee: Tom Fennelly
             Fix For: Smooks v1.1


EDI, smooks core, smooks extended configs

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Component/s: Release

> Upload all config XSDs to the website.
> --------------------------------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.1
>
>
> EDI, smooks core, smooks extended configs

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

    [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=151970#action_151970 ]

Tom Fennelly commented on MILYN-205:
------------------------------------

Don't forget the parser configs too!!

> Upload all config XSDs to the website.
> --------------------------------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.1
>
>
> EDI, smooks core, smooks extended configs

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs

  was:EDI, smooks core, smooks extended configs

        Summary: Upload release artifacts  (was: Upload all config XSDs to the website.)

> Upload release artifacts
> ------------------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.1
>
>
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net

  was:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs

        Summary: Release Tasks  (was: Upload release artifacts)

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.1
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs to sf.net

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Fix Version/s:     (was: Smooks v1.1)
                   Smooks v1.2

Moving to v1.2.  We're done with v1.1.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.2
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs to sf.net

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net
# Update Wiki template Template:CurrentSmooksVersion with release version
# Update Wiki page Example-vX.X-Instructions with release tag SVN address


  was:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.2
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs to sf.net
> # Update Wiki template Template:CurrentSmooksVersion with release version
> # Update Wiki page Example-vX.X-Instructions with release tag SVN address

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net
# Update Wiki template '''Template:CurrentSmooksVersion''' with release version
# Update Wiki template '''Template:Example-vX.X-Instructions''' with release tag SVN address
# Update Wiki template '''Template:VX.X_release_tag''' with release tag SVN address


  was:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net
# Update Wiki template Template:CurrentSmooksVersion with release version
# Update Wiki page Example-vX.X-Instructions with release tag SVN address

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.2
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs to sf.net
> # Update Wiki template '''Template:CurrentSmooksVersion''' with release version
> # Update Wiki template '''Template:Example-vX.X-Instructions''' with release tag SVN address
> # Update Wiki template '''Template:VX.X_release_tag''' with release tag SVN address

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address


  was:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net
# Update Wiki template '''Template:CurrentSmooksVersion''' with release version
# Update Wiki template '''Template:Example-vX.X-Instructions''' with release tag SVN address
# Update Wiki template '''Template:VX.X_release_tag''' with release tag SVN address

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.2
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # XSDs: Extended configs, EDI Parser
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.


  was:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# XSDs: Extended configs, EDI Parser
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.2
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Fix Version/s:     (was: Smooks v1.2)
                   Smooks v1.3

Moving to the v1.3 release.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

    [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=199135#action_199135 ]

Maurice Zeijen commented on MILYN-205:
--------------------------------------

For the Smooks 1.3 release could you please also upload the http://www.milyn.org/xsd/smooks/persistence-1.2.xsd Schema again? I added documentation to this schema. The schema structure it self didn't change so no new Schema version is required.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix)
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Run the distro build
> Uploads:
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #2 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).

Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.


  was:
Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix)
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Run the distro build

Uploads:
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro readme.txt
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #2 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).

Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.


  was:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro readme.txt
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #2 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).

Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.


  was:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).

Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:Example-vX.X-Instructions''' with release tag SVN address
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

SVN:
# Tag the release

JIRA:
# Finalise the release for that version.

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.



  was:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:Example-vX.X-Instructions''' with release tag SVN address
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.3
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> SVN:
> # Tag the release
> JIRA:
> # Finalise the release for that version.
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Fix Version/s:     (was: Smooks v1.3)
                   Smooks v1.4

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.4
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> SVN:
> # Tag the release
> JIRA:
> # Finalise the release for that version.
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

SVN:
# Tag the release

JIRA:
# Finalise the release for that version.

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:VX.X_release_tag''' with release tag SVN address
#  '''Template:vX.X_Maven_Artifact''' with maven release artifact id
# Downloads page.



  was:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

SVN:
# Tag the release

JIRA:
# Finalise the release for that version.

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:VX.X_release_tag''' with release tag SVN address
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.4
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> SVN:
> # Tag the release
> JIRA:
> # Finalise the release for that version.
> Wiki Updates:
> #  '''Template:CurrentSmooksVersion''' with release version
> #  '''Template:VX.X_release_tag''' with release tag SVN address
> #  '''Template:vX.X_Maven_Artifact''' with maven release artifact id
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Description:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

SVN:
# Tag the release

JIRA:
# Finalise the release for that version.

Wiki Updates:
# '''Template:CurrentSmooksVersion''' with release version
# '''Template:VX.X_release_tag''' with release tag SVN address
# Search and replace "vX.X-SNAPSHOT" in user guide
# Downloads page.



  was:
See http://sites.google.com/site/smooksdev/release-instructions (need google access).

Creating the distro:
# Update the main POM version number (remove SNAPSHOT suffix).
#* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
#* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
# Update the version number in assembly.xml
# Update the User Guide URL in assembly.xml
# Update the distro README.html.
#* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
# Do a dry run of the build ("mvn clean install").
#* Check the versions in the local maven repo.  See #1 above.
#* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
# Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
# Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).


Uploads (see release instructions):
# Smooks config XSDs
# EDI Parser XSDs
# Distro and examples to sf.net
# javadocs to sf.net

SVN:
# Tag the release

JIRA:
# Finalise the release for that version.

Wiki Updates:
#  '''Template:CurrentSmooksVersion''' with release version
#  '''Template:VX.X_release_tag''' with release tag SVN address
#  '''Template:vX.X_Maven_Artifact''' with maven release artifact id
# Downloads page.

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.4
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> SVN:
> # Tag the release
> JIRA:
> # Finalise the release for that version.
> Wiki Updates:
> # '''Template:CurrentSmooksVersion''' with release version
> # '''Template:VX.X_release_tag''' with release tag SVN address
> # Search and replace "vX.X-SNAPSHOT" in user guide
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email

     [ http://jira.codehaus.org/browse/MILYN-205?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Tom Fennelly updated MILYN-205:
-------------------------------

    Fix Version/s:     (was: Smooks v1.4)
                   Smooks v1.5

Moving to v1.5

> Release Tasks
> -------------
>
>                 Key: MILYN-205
>                 URL: http://jira.codehaus.org/browse/MILYN-205
>             Project: Milyn
>          Issue Type: Task
>          Components: Release
>            Reporter: Tom Fennelly
>            Assignee: Tom Fennelly
>             Fix For: Smooks v1.5
>
>
> See http://sites.google.com/site/smooksdev/release-instructions (need google access).
> Creating the distro:
> # Update the main POM version number (remove SNAPSHOT suffix).
> #* Need to do a global search and replace on this.  There's a "special" token in the POM to help make this a bit easier.  Their are additional places where the version needs to be changed that are not picked up by this special token.  Search all pom.xml files for <!-- ## Smooks Version ## -->.
> #* Delete everything in $USER_HOME/.m2/repository/org/milyn before building.  Do this so you can check versions in the local repo before deploying to the central mave repo ("mvn clean deploy -P noexamples").  If the pom versoins have all been updated properly, you should only see binaries for the version of Smooks you are building.  You should not see other versions.  If you do see other versions, that means not all the poms have been updated properly, so you need to search a bit.  This is very important because we only have one shot at uploading to the release repo (non-SNAPSHOT repo)!!!
> # Update the version number in assembly.xml
> # Update the User Guide URL in assembly.xml
> # Update the distro README.html.
> #* For patches, make sure to add a link to the JIRA Fixversion for the patch.  See other releases for examples.
> # Do a dry run of the build ("mvn clean install").
> #* Check the versions in the local maven repo.  See #1 above.
> #* Repeat until versions are all OK in the local repo i.e. you only have binaries for the version of Smooks being released.
> # Do a release build and deploy of the Smooks binaries ("mvn clean deploy -P noexamples").
> # Run the distro build ("mvn clean package" in smooks-cartridges/smooks-distro).
> Uploads (see release instructions):
> # Smooks config XSDs
> # EDI Parser XSDs
> # Distro and examples to sf.net
> # javadocs to sf.net
> SVN:
> # Tag the release
> JIRA:
> # Finalise the release for that version.
> Wiki Updates:
> # '''Template:CurrentSmooksVersion''' with release version
> # '''Template:VX.X_release_tag''' with release tag SVN address
> # Search and replace "vX.X-SNAPSHOT" in user guide
> # Downloads page.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://jira.codehaus.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

---------------------------------------------------------------------
To unsubscribe from this list, please visit:

    http://xircles.codehaus.org/manage_email