[jpos-users] balance command problem with JPOS

[Fabio Arias]

Muy buenos Dias, tengo el siguiente problema, necesito poder balancear las cargas de mi switch transaccional desarrollado en JPOS, el problema que se me presenta es que lo estoy haciendo con el comando Balance este comando me permite hacer roundrobin de puertos, el problema reside en que si hago telnets la cosa funciona correctamente, pero cuando lo hago con la aplicacion que tiene jPOS ya no funciona el stream de datos se cierra, o algunas veces si alcanza a funcionar. No se si existe alguna otra forma de balancear las cargas de mi switch.

Muchas Gracias, 

>>>>>>>>>>>>>>>>>>>>>>

Good morning, I have the following problem, I need to balance the loads of my switch transactional JPOS developed, the problem presented to me is that I'm doing with this command Balance command allows me to do roundrobin of ports, the problem is telnets that if I do the thing works fine but when I do it with the application that is no longer working JPOS the data stream is closed, or sometimes if you reach work. Do not know if there is any other way to balance the loads of my switch. 

Thank you very much,

Fabio Hernando Arias Vera
Cel. [phone]
Sent from Bogotá, Cundinamarca, Colombia
Marie von Ebner-Eschenbach  - "Even a stopped clock is right twice a day."

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the  "jPOS Users" group.
Please see http://jpos.org/wiki/JPOS_Mailing_List_Readme_first
To post to this group, send email to jpos-users@...
To unsubscribe, send email to jpos-users+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/jpos-users
-~----------~----~----~----~------~----~------~--~---

[Alejandro Revilla]

--[ Versión Castiza ]-----------------
Funciona OK sin el balance de por medio?
Que muestran los logs desde el lado de jPOS al recibir una conexión via 'Balance' ?

--[ English version ]------------------
Does it work OK without using balance in between?
How do the jPOS logs look like when receiving transactions via Balance?

On Wed, Sep 30, 2009 at 12:25 AM, Fabio Arias <fharias@...> wrote:

Muy buenos Dias, tengo el siguiente problema, necesito poder balancear las cargas de mi switch transaccional desarrollado en JPOS, el problema que se me presenta es que lo estoy haciendo con el comando Balance este comando me permite hacer roundrobin de puertos, el problema reside en que si hago telnets la cosa funciona correctamente, pero cuando lo hago con la aplicacion que tiene jPOS ya no funciona el stream de datos se cierra, o algunas veces si alcanza a funcionar. No se si existe alguna otra forma de balancear las cargas de mi switch.

Muchas Gracias, 

>>>>>>>>>>>>>>>>>>>>>>

Good morning, I have the following problem, I need to balance the loads of my switch transactional JPOS developed, the problem presented to me is that I'm doing with this command Balance command allows me to do roundrobin of ports, the problem is telnets that if I do the thing works fine but when I do it with the application that is no longer working JPOS the data stream is closed, or sometimes if you reach work. Do not know if there is any other way to balance the loads of my switch. 

Thank you very much,

Fabio Hernando Arias Vera
Cel. [phone]
Sent from Bogotá, Cundinamarca, Colombia
Marie von Ebner-Eschenbach  - "Even a stopped clock is right twice a day."

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the  "jPOS Users" group.
Please see http://jpos.org/wiki/JPOS_Mailing_List_Readme_first
To post to this group, send email to jpos-users@...
To unsubscribe, send email to jpos-users+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/jpos-users
-~----------~----~----~----~------~----~------~--~---