[monit] Monit "connection failure" for apache
|
View:
New views
4 Messages
—
Rating Filter:
Alert me
|
 |
[monit] Monit "connection failure" for apache
by Presence
::
Rate this Message:
Some parts of this message have been removed.
Learn more about Nabble's security policy.
Hey guys, I have monit set up on my freebsd webserver, and everything seems to be working, but there is a problem. On the monit service manager page (and with "monit status" it shows "Connection Failed" as the status for my apache service. When I run "monit validate" I get no errors. Here is my monitrc related to that monitoring setup: monit-general@... I had to put monit into passive mode so it wont keep restarting apache. The output from "monit status" is below: Process 'apache' status Connection failed monitoring status monitored pid 14561 parent pid 1 uptime 54m childrens 264 memory kilobytes 13168 memory kilobytes total 4443884 memory percent 0.3% memory percent total 121.3% cpu percent 11.2% cpu percent total 11.2% port response time 0.008s to 127.0.0.1:80/monit/token [HTTP via TCP] data collected Tue Oct 23 18:50:38 2007 The port response time tells me that it does receive the token which just contains the text "Monit is running.". If I connect to the webserver and request this file, it confirms I can request it, and that I get the contents. How do I get it to work properly? Every configuration I have checked is similar to mine...most are even less detailed. Climb to the top of the charts! Play Star Shuffle: the word scramble challenge with star power. Play Now! -- To unsubscribe: http://lists.nongnu.org/mailman/listinfo/monit-general |
|
|
Re: [monit] Monit "connection failure" for apache
by Martin Pala
::
Rate this Message:
|
|
|
RE: [monit] Monit "connection failure" for apache
by Presence
::
Rate this Message:
Some parts of this message have been removed.
Learn more about Nabble's security policy.
Martin, I am running monit 4.9. After killing monit and restarting it (with -v) it appears to have gone away. Maybe the problem you are speaking of still exists in 4.9. Kevin > Date: Wed, 24 Oct 2007 22:26:53 +0200 > From: martinp@... > To: monit-general@... > Subject: Re: [monit] Monit "connection failure" for apache > > Try to run monit in verbose mode (using -v option) and check logs. > > Which monit version it is? On monit <4.9 there was bug, which may keep > the error flag when monit was reloaded, but it didn't restarted the > service incorrectly - just the report on status page was wrong (it was > fixed in monit 4.9) > > > Martin > > > The Presence wrote: > > Hey guys, > > > > I have monit set up on my freebsd webserver, and everything seems to be > > working, but there is a problem. On the monit service manager page (and > > with "monit status" it shows "Connection Failed" as the status for my > > apache service. When I run "monit validate" I get no errors. > > > > Here is my monitrc related to that monitoring setup: > > > > check process apache with pidfile /var/run/httpd.pid > > start program = "/usr/local/etc/rc.d/apache22 start" > > stop program = "/usr/local/etc/rc.d/apache22 stop" > > if cpu > 60% for 2 cycles then alert > > if cpu > 80% for 5 cycles then restart > > if totalmem > 6144.0 MB for 5 cycles then restart > > if children > 500 then restart > > if loadavg(5min) greater than 10 for 8 cycles then stop > > if failed host www.tech-faq.com port 80 protocol http > > request "/monit/token" > > then restart > > # monit will only monit/give alert in this mode. > > mode passive > > if 5 restarts within 5 cycles then timeout > > > > <mailto:monit-general@...> > > I had to put monit into passive mode so it wont keep restarting apache. > > The output from "monit status" is below: > > > > Process 'apache' > > status Connection failed > > monitoring status monitored > > pid 14561 > > parent pid 1 > > uptime 54m > > childrens 264 > > memory kilobytes 13168 > > memory kilobytes total 4443884 > > memory percent 0.3% > > memory percent total 121.3% > > cpu percent 11.2% > > cpu percent total 11.2% > > port response time 0.008s to 127.0.0.1:80/monit/token > > [HTTP via TCP] > > data collected Tue Oct 23 18:50:38 2007 > > > > The port response time tells me that it does receive the token which > > just contains the text "Monit is running.". If I connect to the > > webserver and request this file, it confirms I can request it, and that > > I get the contents. > > > > How do I get it to work properly? Every configuration I have checked is > > similar to mine...most are even less detailed. > > > > ------------------------------------------------------------------------ > > Climb to the top of the charts! Play Star Shuffle: the word scramble > > challenge with star power. Play Now! > > <http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_oct> > > > > > > ------------------------------------------------------------------------ > > > > -- > > To unsubscribe: > > http://lists.nongnu.org/mailman/listinfo/monit-general > > > -- > To unsubscribe: > http://lists.nongnu.org/mailman/listinfo/monit-general Peek-a-boo FREE Tricks & Treats for You! Get 'em! -- To unsubscribe: http://lists.nongnu.org/mailman/listinfo/monit-general |
|
|
Re: [monit] Monit "connection failure" for apache
by Martin Pala
::
Rate this Message:
|
| Free embeddable forum powered by Nabble | Forum Help |
