11.1 ps3 network/dns issue

[Mick Charles Beaver]

Hello,

I have been having the strangest network issue as of late. I did not
have any problems with openSUSE 11.0, but am having it with 11.1. Any
troubleshooting tips would be greatly appreciated.

I seem to be getting intermittent problems resolving hosts. I will
have trouble trying to update with zypper or browse the web with
Firefox. It doesn't fail everytime, so I do not know where to begin to
debug. My wireless connection works correctly when using the PS3 under
the Game OS.

Here is an example of what I am seeing:

ps3-linux:~ # host powerpc.opensuse.org
powerpc.opensuse.org has address 195.135.221.142
ps3-linux:~ # zypper update
Download (curl) error for
'http://powerpc.opensuse.org/distribution/11.1/repo/oss/content':
Error code: Connection failed
Error message: Couldn't resolve host 'powerpc.opensuse.org'

Abort, retry, ignore? [A/r/i]: ^Cps3-linux:~ #
ps3-linux:~ # host powerpc.opensuse.org
powerpc.opensuse.org has address 195.135.221.142

I am using wlan0 configured via DHCP connecting to a common LinkSys
WRT54G wireless router without encryption. Like I mentioned earlier, I
used the same setup under 11.0 without a problem. Other computers on
my wireless network do not have any trouble.

One thing that seemed out of place to me was that the network activity
light on the PS3 seems to stay lit when I am not using the network,
and blinks when I am. Shouldn't it be off when I'm not using any
network functions? Is anybody else seeing that particular issue?

Here is more system information:

ps3-linux:~ # uname -a
Linux ps3-linux 2.6.27.7-9-ppc64 #1 SMP 2008-12-04 18:10:04 +0100
ppc64 ppc64 ppc64 GNU/Linux

ps3-linux:~ # ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:1D:0D:B1:9C:D3
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:51

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1404 (1.3 Kb)  TX bytes:1404 (1.3 Kb)

wlan0     Link encap:Ethernet  HWaddr 00:1D:0D:B1:9C:D3
          inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21d:dff:feb1:9cd3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29658 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19969 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:39358232 (37.5 Mb)  TX bytes:2213012 (2.1 Mb)

ps3-linux:~ # iwconfig wlan0
wlan0     IEEE 802.11bg  ESSID:"beaver"  Nickname:"gelic_wl"
          Mode:Managed  Access Point: 00:1D:7E:41:5C:81
          Encryption key:off
          Link Signal level=90/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

ps3-linux:~ # tail -5 /etc/resolv.conf
### Please remove (at least) this line when you modify the file!
search eau.wi.charter.com
nameserver 68.115.71.53
nameserver 24.196.64.53
nameserver 24.159.193.40
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...

[Joachim Banzhaf]

Hi Mick,

Am Mittwoch, 14. Januar 2009 05:34:53 schrieb Mick Charles Beaver:

> Hello,
>
> I have been having the strangest network issue as of late. I did not
> have any problems with openSUSE 11.0, but am having it with 11.1. Any
> troubleshooting tips would be greatly appreciated.
>
> I seem to be getting intermittent problems resolving hosts. I will
> have trouble trying to update with zypper or browse the web with
> Firefox. It doesn't fail everytime, so I do not know where to begin to
> debug. My wireless connection works correctly when using the PS3 under
> the Game OS.

Which nameserver is used by the game os and your 11.0 installation?
Maybe the ones used in your resolv.conf are flakey?
I use the same router, but with openwrt firmware. It acts as caching
nameserver, so I enter the routers ip as dns server and let the router detect
the dns setting when connecting to the dsl provider. That has proven to be a
stable config.

HTH,

Joachim
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...

[Stefan Assmann]

Mick Charles Beaver wrote:

> Hello,
>
> I have been having the strangest network issue as of late. I did not
> have any problems with openSUSE 11.0, but am having it with 11.1. Any
> troubleshooting tips would be greatly appreciated.
>
> I seem to be getting intermittent problems resolving hosts. I will
> have trouble trying to update with zypper or browse the web with
> Firefox. It doesn't fail everytime, so I do not know where to begin to
> debug. My wireless connection works correctly when using the PS3 under
> the Game OS.
>
> Here is an example of what I am seeing:
>
> ps3-linux:~ # host powerpc.opensuse.org
> powerpc.opensuse.org has address 195.135.221.142
> ps3-linux:~ # zypper update
> Download (curl) error for
> 'http://powerpc.opensuse.org/distribution/11.1/repo/oss/content':
> Error code: Connection failed
> Error message: Couldn't resolve host 'powerpc.opensuse.org'
>
> Abort, retry, ignore? [A/r/i]: ^Cps3-linux:~ #
> ps3-linux:~ # host powerpc.opensuse.org
> powerpc.opensuse.org has address 195.135.221.142

could you constantly run a ping to powerpc.opensuse.org and see if that
times out from time to time while doing 'zypper up'.

>
> I am using wlan0 configured via DHCP connecting to a common LinkSys
> WRT54G wireless router without encryption. Like I mentioned earlier, I
> used the same setup under 11.0 without a problem. Other computers on
> my wireless network do not have any trouble.
>
> One thing that seemed out of place to me was that the network activity
> light on the PS3 seems to stay lit when I am not using the network,
> and blinks when I am. Shouldn't it be off when I'm not using any
> network functions? Is anybody else seeing that particular issue?
>
> Here is more system information:
>
> ps3-linux:~ # uname -a
> Linux ps3-linux 2.6.27.7-9-ppc64 #1 SMP 2008-12-04 18:10:04 +0100
> ppc64 ppc64 ppc64 GNU/Linux
>
> ps3-linux:~ # ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 00:1D:0D:B1:9C:D3
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Interrupt:51
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:18 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:1404 (1.3 Kb)  TX bytes:1404 (1.3 Kb)
>
> wlan0     Link encap:Ethernet  HWaddr 00:1D:0D:B1:9C:D3
>           inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::21d:dff:feb1:9cd3/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:29658 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:19969 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:39358232 (37.5 Mb)  TX bytes:2213012 (2.1 Mb)
>
> ps3-linux:~ # iwconfig wlan0
> wlan0     IEEE 802.11bg  ESSID:"beaver"  Nickname:"gelic_wl"
>           Mode:Managed  Access Point: 00:1D:7E:41:5C:81
>           Encryption key:off
>           Link Signal level=90/100
>           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
>
> ps3-linux:~ # tail -5 /etc/resolv.conf
> ### Please remove (at least) this line when you modify the file!
> search eau.wi.charter.com
> nameserver 68.115.71.53
> nameserver 24.196.64.53
> nameserver 24.159.193.40

  Stefan

--
Stefan Assmann          | SUSE LINUX Products GmbH
Software Engineer       | Maxfeldstr. 5, D-90409 Nuernberg
Mail: sassmann@...  | GF: Markus Rex, HRB 16746 (AG Nuernberg)
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...

[Mick Charles Beaver]

I believe I have this issue resolved. Ultimately, it seems to be
related to the nameservers from my ISP or some sort of interaction
between my router and DNS. Perhaps someone could shed some more light
on this if they have solved a similar issue.

Here is what I tried:

1. I edited resolv.conf, trying each name server by itself. Of the
three name servers, #1 and #2 worked by themselves and I was able to
install some zypper packages, while #3 had failures where it couldn't
resolv a hostname. Enabling #1 and #2 together unexpectedly also
resulted in a failure. I wouldn't consider any of my tests objective,
as I don't know how to correctly flush DNS and reload the
configuration; I did "/etc/init.d/network restart" between tests.

2. From searching the net, I came across a post that claimed that the
Linksys WRT54G router actually runs a nameserver service and may be
used as such. Setting my nameserver to the router's IP seems to work
well for my configuration. My router is version 8.0 with firmware
8.00.5. This leads me to believe my problem may be some strange
Linux/router/DNS interaction. I'm really unsure... if this setup
works, I probably will not invest more debugging time in the immediate
future.

Here is the link to the thread that lead me to set my router as my nameserver:
http://creativekarma.com/ee.php/weblog/comments/slow_dns_response_on_linux_with_wrt54g_router/

Lastly, can someone else confirm that the green network activity light
stays solidly on when no network activity is occurring?

-Mick
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...

[Joachim Banzhaf]

Hi Mick,

Mick Charles Beaver schrieb:

> I believe I have this issue resolved. Ultimately, it seems to be
> related to the nameservers from my ISP or some sort of interaction
> between my router and DNS. Perhaps someone could shed some more light
> on this if they have solved a similar issue.
>
> Here is what I tried:
>
> 1. I edited resolv.conf, trying each name server by itself. Of the
> three name servers, #1 and #2 worked by themselves and I was able to
> install some zypper packages, while #3 had failures where it couldn't
> resolv a hostname. Enabling #1 and #2 together unexpectedly also
> resulted in a failure. I wouldn't consider any of my tests objective,
> as I don't know how to correctly flush DNS and reload the
> configuration; I did "/etc/init.d/network restart" between tests.
>  

"/etc/init.d/nscd restart" flushes the name cache. But I would expect,
that failures dont get in the cache. So that would still not explain
your failures when using #1 and #2.
> 2. From searching the net, I came across a post that claimed that the
> Linksys WRT54G router actually runs a nameserver service and may be
> used as such. Setting my nameserver to the router's IP seems to work
> well for my configuration. My router is version 8.0 with firmware
>  
As stated in my other post, I would recommend using this, because it
updates the name servers automatically if your isp changes them.

> Lastly, can someone else confirm that the green network activity light
> stays solidly on when no network activity is occurring?
>  
This is the usual bahaviour of network activity leds. Permanent on means
link to switch/hub in this direction is ok, but no traffic. Blinking
means traffic in this direction. Along with the corresponding led at the
switch you get a complete status of the link and traffic.
I did not configure ethernet yet (and ifconfig did not list eth0 this
morning, only wlan0), so the ps3 might still be the big exception from this.

HTH,

Joachim

--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...

[Joachim Banzhaf]

Hi again,

Am Mittwoch, 14. Januar 2009 18:09:40 schrieb Joachim Banzhaf:

> > Lastly, can someone else confirm that the green network activity light
> > stays solidly on when no network activity is occurring?
>
> This is the usual bahaviour of network activity leds. Permanent on means
> link to switch/hub in this direction is ok, but no traffic. Blinking
> means traffic in this direction. Along with the corresponding led at the
> switch you get a complete status of the link and traffic.
> I did not configure ethernet yet (and ifconfig did not list eth0 this
> morning, only wlan0), so the ps3 might still be the big exception from
> this.

I had configured WLAN yesterday for a short test and it is the same here: Off
when not associated with access point, and permanently on when no traffic.

HTH,

Joachim

P.S.: my ethernet works fine now. Bit strange, but it was just a matter of a
reboot.
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe@...
For additional commands, e-mail: opensuse-ppc+help@...