4.4-beta, ramdisk, amd64: nic not configured

[Paul Irofti-3]

I've fetched floppy44.fs from my local mirror and wrote it to a floppy.
So far so good. Booting, fdisk-ing and disklabel-ing all went fine on my
amd64. But when I got to network config the install said there are no
network ifs to configure.

Checking the dmesg I noticed this:

"VIA RhineII-2" rev 0x7c at pci0 dev 18 function 0 not configured

I thought I'd give it a try with acpi disabled. Same thing.

I had OpenBSD installed on this machine until the former hdd broke. So I
know the card works fine and the OS alltogether. Other info I wrote down
from the dmesg:

OpenBSD 4.4-beta (RAMDISK) #67: <date>
cpu0: Intel Pentium 4 CPU 2.80GHz
bios0: ASUSTek Computer INC

I'll be happy to provide any further information you might require.
--
bulibuta@...
SDF Public Access UNIX System - http://sdf.lonestar.org

[Otto Moerbeek]

On Thu, Jul 03, 2008 at 07:07:52PM +0000, Paul Irofti wrote:

> I've fetched floppy44.fs from my local mirror and wrote it to a floppy.
> So far so good. Booting, fdisk-ing and disklabel-ing all went fine on my
> amd64. But when I got to network config the install said there are no
> network ifs to configure.
>
> Checking the dmesg I noticed this:
>
> "VIA RhineII-2" rev 0x7c at pci0 dev 18 function 0 not configured
>
> I thought I'd give it a try with acpi disabled. Same thing.
>
> I had OpenBSD installed on this machine until the former hdd broke. So I
> know the card works fine and the OS alltogether. Other info I wrote down
> from the dmesg:
>
> OpenBSD 4.4-beta (RAMDISK) #67: <date>
> cpu0: Intel Pentium 4 CPU 2.80GHz
> bios0: ASUSTek Computer INC
>
> I'll be happy to provide any further information you might require.
> --
> bulibuta@...
> SDF Public Access UNIX System - http://sdf.lonestar.org

VIA RhineII-2 is vr(4). That driver is not on the floppy. Try the CD
boot media.

        -Otto

[Paul Irofti-3]

On Thu, Jul 03, 2008 at 09:16:07PM +0200, Otto Moerbeek wrote:
> VIA RhineII-2 is vr(4). That driver is not on the floppy. Try the CD
> boot media.
>
> -Otto
>

Thanks, it was a success w/ install44.iso (writing from the new
installation). Attached is a dmesg for whoever might be interested.
--
bulibuta@...
SDF Public Access UNIX System - http://sdf.lonestar.org
OpenBSD 4.4-beta (RAMDISK_CD) #68: Tue Jul  1 20:58:22 MDT 2008
    deraadt@...:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2135580672 (2036MB)
avail mem = 2073702400 (1977MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (59 entries)
bios0: vendor American Megatrends Inc. version "0709" date 08/04/2006
bios0: ASUSTeK Computer INC. P5VDC-MX
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P7)
acpiprt3 at acpi0: bus 3 (P7P8)
acpiprt4 at acpi0: bus 4 (P7P9)
acpiprt5 at acpi0: bus 5 (P2PB)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.53 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT8251 SATA" rev 0x00: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD7500AYYS-01RCA0>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD/DVDW SDR5472D, TU00> ATAPI 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: irq 10
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x90: irq 3
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
"VIA VT8251 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 11, address 00:e0:12:34:56:78
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci2 dev 0 function 1 "VIA VT8251 PCIE" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 19 function 1 "VIA VT8251 PCI" rev 0x00
pci5 at ppb4 bus 5
"C-Media Electronics CMI8738/C3DX Audio" rev 0x10 at pci5 dev 9 function 0 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4480 blocks
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Microsoft Microsoft Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Microsoft Microsoft Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 2
uhidev1: iclass 3/0, 23 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 5 not configured
uhid at uhidev1 reportid 6 not configured
uhid at uhidev1 reportid 17 not configured
uhid at uhidev1 reportid 18 not configured
uhid at uhidev1 reportid 19 not configured
uhid at uhidev1 reportid 20 not configured
uhid at uhidev1 reportid 21 not configured
uhid at uhidev1 reportid 23 not configured
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 4.4-beta (GENERIC) #1515: Tue Jul  1 20:46:07 MDT 2008
    deraadt@...:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2134282240 (2035MB)
avail mem = 2072408064 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (59 entries)
bios0: vendor American Megatrends Inc. version "0709" date 08/04/2006
bios0: ASUSTeK Computer INC. P5VDC-MX
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB
acpi0: wakeup devices UAR1(S4) PS2K(S4) PS2M(S4) EHCI(S4) ILAN(S4) P7P8(S4) P7P9(S4) P2PB(S4) PCI1(S4) PCI2(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P7)
acpiprt3 at acpi0: bus 3 (P7P8)
acpiprt4 at acpi0: bus 4 (P7P9)
acpiprt5 at acpi0: bus 5 (P2PB)
acpicpu0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.46 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
pciide0 at pci0 dev 15 function 0 "VIA VT8251 SATA" rev 0x00: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD7500AYYS-01RCA0>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD/DVDW SDR5472D, TU00> ATAPI 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: irq 10
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x90: irq 3
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 11, address 00:e0:12:34:56:78
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci2 dev 0 function 1 "VIA VT8251 PCIE" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 19 function 1 "VIA VT8251 PCI" rev 0x00
pci5 at ppb4 bus 5
cmpci0 at pci5 dev 9 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev 0x10: irq 5
audio0 at cmpci0
opl0 at cmpci0: model OPL3
midi0 at opl0: <CMPCI Yamaha OPL3>
mpu at cmpci0 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 0x07, EC port 0xd00
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Microsoft Microsoft Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Microsoft Microsoft Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 2
uhidev1: iclass 3/0, 23 report ids
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev1 reportid 5: input=3, output=0, feature=0
uhid5 at uhidev1 reportid 6: input=0, output=0, feature=1
ums0 at uhidev1 reportid 17: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid6 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid7 at uhidev1 reportid 19: input=1, output=0, feature=0
uhid8 at uhidev1 reportid 20: input=1, output=0, feature=0
uhid9 at uhidev1 reportid 21: input=3, output=0, feature=0
uhid10 at uhidev1 reportid 23: input=0, output=0, feature=1
softraid0 at root
root on wd0a swap on wd0b dump on wd0b