Anyone have two or three working dot matrix impact print heads ?
|
View:
New views
9 Messages
—
Rating Filter:
Alert me
|
 |
Anyone have two or three working dot matrix impact print heads ?
by AGSCalabrese
::
Rate this Message:
I want to experiment with dot matrix impact print heads.
Gus Calabrese -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by jim-142
::
Rate this Message:
Okay, proceed.
----- Original Message ----- From: "AGSCalabrese" <agscal@...> To: "Microcontroller discussion list - Public." <piclist@...> Sent: Wednesday, July 22, 2009 12:21 PM Subject: [buy] Anyone have two or three working dot matrix impact print heads ? >I want to experiment with dot matrix impact print heads. > > Gus Calabrese > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by Dario Greggio (in giro)
::
Rate this Message:
AGSCalabrese ha scritto:
> I want to experiment with dot matrix impact print heads. i possibly saved stepper motors from dot-printer and inljet, but not heads... -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by AGSCalabrese
::
Rate this Message:
right on, Jim Thanks I will need your address. Oh ...... just
noticed some of the text on the original e-mail was left off. NO biggie. The missing text just asked for a volunteer to let me apply impact print heads to their skull at varying drive voltages. I presume that you are volunteering. Best Gus > On Jul 22, 2009, at 11:51 AM, jim wrote: > > Okay, proceed. > > > > ----- Original Message ----- > From: "AGSCalabrese" <agscal@...> > To: "Microcontroller discussion list - Public." <piclist@...> > Sent: Wednesday, July 22, 2009 12:21 PM > Subject: [buy] Anyone have two or three working dot matrix impact > heads ? > > >> I want to experiment with dot matrix impact print heads. >> >> Gus Calabrese >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by AGSCalabrese
::
Rate this Message:
On Jul 22, 2009, at 11:21 AM, AGSCalabrese wrote: I want to experiment with dot matrix impact print heads. I am in Denver, CO USA I want to see if the rods in the heads can be used to push viscous liquids out a nozzle. OR I want to see if the rods in the heads can be used to valve* viscous liquids out a nozzle. * is valve a verb ? Gus Calabrese -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by Marcel Duchamp
::
Rate this Message:
AGSCalabrese wrote:
> On Jul 22, 2009, at 11:21 AM, AGSCalabrese wrote: > > I want to experiment with dot matrix impact print heads. > I am in Denver, CO USA > > I want to see if the rods in the heads can be used to push viscous > liquids out a nozzle. > OR > I want to see if the rods in the heads can be used to valve* viscous > liquids out a nozzle. > > * is valve a verb ? > > Gus Calabrese Gonna make a solder paste dispenser? Print your paste onto pcbs? -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact printheads ?
by jim-142
::
Rate this Message:
Sure, but I will tell you now that my skull will withstand impacts from the
highest voltage you can supply to a printhead. All kidding aside, the throw on an impact printhead is only a 100 mils or less typically. I don't know what you have in mind, but this is a rather short distance. And I will look in my junk box. I may still have one or two left in there. If I do, you pay to ship them to you, and you can have them. Regards, Jim ----- Original Message ----- From: "AGSCalabrese" <agscal@...> To: "Microcontroller discussion list - Public." <piclist@...> Sent: Wednesday, July 22, 2009 1:45 PM Subject: Re: [buy] Anyone have two or three working dot matrix impact printheads ? > right on, Jim Thanks I will need your address. Oh ...... just > noticed some of the text on the original e-mail was left off. NO > biggie. The missing text just asked for a volunteer to let me apply > impact print heads to their skull at varying drive voltages. I > presume that you are volunteering. > Best > Gus > > >> On Jul 22, 2009, at 11:51 AM, jim wrote: >> >> Okay, proceed. >> >> >> >> ----- Original Message ----- >> From: "AGSCalabrese" <agscal@...> >> To: "Microcontroller discussion list - Public." <piclist@...> >> Sent: Wednesday, July 22, 2009 12:21 PM >> Subject: [buy] Anyone have two or three working dot matrix impact >> heads ? >> >> >>> I want to experiment with dot matrix impact print heads. >>> >>> Gus Calabrese >>> -- >>> http://www.piclist.com PIC/SX FAQ & list archive >>> View/change your membership options at >>> http://mailman.mit.edu/mailman/listinfo/piclist >>> >> > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact print heads ?
by AGSCalabrese
::
Rate this Message:
I am planning to push acrylic paint onto a cloth surface that primates
wear on their upper bodies. OMG Gus On Jul 22, 2009, at 12:56 PM, Marcel Duchamp wrote: AGSCalabrese wrote: > On Jul 22, 2009, at 11:21 AM, AGSCalabrese wrote: > > I want to experiment with dot matrix impact print heads. > I am in Denver, CO USA > > I want to see if the rods in the heads can be used to push viscous > liquids out a nozzle. > OR > I want to see if the rods in the heads can be used to valve* viscous > liquids out a nozzle. > > * is valve a verb ? > > Gus Calabrese Gonna make a solder paste dispenser? Print your paste onto pcbs? -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
|
|
Re: Anyone have two or three working dot matrix impact printheads ?
by AGSCalabrese
::
Rate this Message:
Jim
I will be happy to pay shipping and buy you a root beer float. I sure am excited about the skull experiment. I will ship you the completed driver circuit next week. I am thinking that more than 13KV at 300A will destroy the insulation before the rod gets going. What is your recommendation ? Gus > On Jul 22, 2009, at 1:45 PM, jim wrote: > > Sure, but I will tell you now that my skull will withstand impacts > from the > highest voltage you can supply to a printhead. > > All kidding aside, the throw on an impact printhead is only a 100 > mils or > less typically. I don't know what you have in mind, but this is a > rather > short distance. And I will look in my junk box. I may still have > one or > two left in there. If I do, you pay to ship them to you, and you > can have > them. > > Regards, Jim > > > ----- Original Message ----- > From: "AGSCalabrese" <agscal@...> > To: "Microcontroller discussion list - Public." <piclist@...> > Sent: Wednesday, July 22, 2009 1:45 PM > Subject: Re: [buy] Anyone have two or three working dot matrix impact > printheads ? > > >> right on, Jim Thanks I will need your address. Oh ...... just >> noticed some of the text on the original e-mail was left off. NO >> biggie. The missing text just asked for a volunteer to let me apply >> impact print heads to their skull at varying drive voltages. I >> presume that you are volunteering. >> Best >> Gus >> >> >>> On Jul 22, 2009, at 11:51 AM, jim wrote: >>> >>> Okay, proceed. >>> >>> >>> >>> ----- Original Message ----- >>> From: "AGSCalabrese" <agscal@...> >>> To: "Microcontroller discussion list - Public." <piclist@...> >>> Sent: Wednesday, July 22, 2009 12:21 PM >>> Subject: [buy] Anyone have two or three working dot matrix impact >>> heads ? >>> >>> >>>> I want to experiment with dot matrix impact print heads. >>>> >>>> Gus Calabrese >>>> -- >>>> http://www.piclist.com PIC/SX FAQ & list archive >>>> View/change your membership options at >>>> http://mailman.mit.edu/mailman/listinfo/piclist >>>> >>> >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist |
| Free embeddable forum powered by Nabble | Forum Help |
