Asterisk gets killed during startup

[ninelives_in]

Hi,

I've installed asterisk 1.6 on my DNS323. When i start asterisk,its
terminates without loading after displaying the message KILLED. I've
tried ast version 1.4 and 1.6,both have the same problem. i tried
starting in verbose mode and removed loading of any unwanted modules.
still the problem exists. I'm posting one of the console output

    -- Added extension '_*21*X.' priority 1 to apps (0x1c0160)      
         
    -- Added extension '_*21*X.' priority 2 to apps (0x1c0160)      
         
    -- Added extension '_*21*X.' priority 3 to apps (0x1c0160)      
         
    -- Added extension '_*21*X.' priority 4 to apps (0x1c0160)      
         
    -- Added extension '_*21*X.' priority 5 to apps (0x1c0160)      
         
    -- Added extension '*20*' priority 1 to apps (0x1c0160)          
         
    -- Added extension '*20*' priority 2 to apps (0x1c0160)          
         
    -- Added extension '*20*' priority 3 to apps (0x1c0160)          
         
    -- Added extension '*20*' priority 4 to apps (0x1c0160)          
         
    -- Added extension '*25*' priority 1 to apps (0x1c0160)          
         
    -- Added extension '*25*' priority 2 to apps (0x1c0160)          
         
    -- Added extension '*25*' priority 3 to apps (0x1c0160)          
         
    -- Added extension '*25*' prioriKilled

as you can see,it gets killed abruptly. I've no idea why and
afterwards my ssh session will be all messed up.

if my prompt is roo@HOSTNAME it will change to @HOSTNAME and pressing
enter does not advance the prompt to the next line and after a while
the session quits.

any suggestions?

[Ovidiu Sas-3]

Asterisk and a few other programs does not work properly (segfaults) on DNS323.

Regards,
Ovidiu Sas

On Wed, Nov 19, 2008 at 12:52 AM, ninelives_in <ninelives_in@...> wrote:

> Hi,
>
> I've installed asterisk 1.6 on my DNS323. When i start asterisk,its
> terminates without loading after displaying the message KILLED. I've
> tried ast version 1.4 and 1.6,both have the same problem. i tried
> starting in verbose mode and removed loading of any unwanted modules.
> still the problem exists. I'm posting one of the console output
>
>    -- Added extension '_*21*X.' priority 1 to apps (0x1c0160)
>
>    -- Added extension '_*21*X.' priority 2 to apps (0x1c0160)
>
>    -- Added extension '_*21*X.' priority 3 to apps (0x1c0160)
>
>    -- Added extension '_*21*X.' priority 4 to apps (0x1c0160)
>
>    -- Added extension '_*21*X.' priority 5 to apps (0x1c0160)
>
>    -- Added extension '*20*' priority 1 to apps (0x1c0160)
>
>    -- Added extension '*20*' priority 2 to apps (0x1c0160)
>
>    -- Added extension '*20*' priority 3 to apps (0x1c0160)
>
>    -- Added extension '*20*' priority 4 to apps (0x1c0160)
>
>    -- Added extension '*25*' priority 1 to apps (0x1c0160)
>
>    -- Added extension '*25*' priority 2 to apps (0x1c0160)
>
>    -- Added extension '*25*' priority 3 to apps (0x1c0160)
>
>    -- Added extension '*25*' prioriKilled
>
> as you can see,it gets killed abruptly. I've no idea why and
> afterwards my ssh session will be all messed up.
>
> if my prompt is roo@HOSTNAME it will change to @HOSTNAME and pressing
> enter does not advance the prompt to the next line and after a while
> the session quits.
>
> any suggestions?
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

[ninelives_in]

oh bugger...i'll try it once more from scratch and then i'll give up :(


--- In nslu2-asterisk@..., "Ovidiu Sas" <osas@...> wrote:
>
> Asterisk and a few other programs does not work properly (segfaults)
on DNS323.

>
> Regards,
> Ovidiu Sas
>
> On Wed, Nov 19, 2008 at 12:52 AM, ninelives_in <ninelives_in@...> wrote:
> > Hi,
> >
> > I've installed asterisk 1.6 on my DNS323. When i start asterisk,its
> > terminates without loading after displaying the message KILLED. I've
> > tried ast version 1.4 and 1.6,both have the same problem. i tried
> > starting in verbose mode and removed loading of any unwanted modules.
> > still the problem exists. I'm posting one of the console output
> >
> >    -- Added extension '_*21*X.' priority 1 to apps (0x1c0160)
> >
> >    -- Added extension '_*21*X.' priority 2 to apps (0x1c0160)
> >
> >    -- Added extension '_*21*X.' priority 3 to apps (0x1c0160)
> >
> >    -- Added extension '_*21*X.' priority 4 to apps (0x1c0160)
> >
> >    -- Added extension '_*21*X.' priority 5 to apps (0x1c0160)
> >
> >    -- Added extension '*20*' priority 1 to apps (0x1c0160)
> >
> >    -- Added extension '*20*' priority 2 to apps (0x1c0160)
> >
> >    -- Added extension '*20*' priority 3 to apps (0x1c0160)
> >
> >    -- Added extension '*20*' priority 4 to apps (0x1c0160)
> >
> >    -- Added extension '*25*' priority 1 to apps (0x1c0160)
> >
> >    -- Added extension '*25*' priority 2 to apps (0x1c0160)
> >
> >    -- Added extension '*25*' priority 3 to apps (0x1c0160)
> >
> >    -- Added extension '*25*' prioriKilled
> >
> > as you can see,it gets killed abruptly. I've no idea why and
> > afterwards my ssh session will be all messed up.
> >
> > if my prompt is roo@HOSTNAME it will change to @HOSTNAME and pressing
> > enter does not advance the prompt to the next line and after a while
> > the session quits.
> >
> > any suggestions?
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>