Blu-Ray burn errors (sorry, maybe posted twice)

[Mark Williams-18]

Hi all,

I'm trying to use a Panasonic SW-5582C and the actual cdrecord release
for burning large UDF images (30-40GB).
Burning of media fails in 9 of 10 tries, in dummy mode as in real mode too.

The abort occurs sometimes quick, sometimes half way through the image
file of 33 GB.
One burn process has been successfull (using 1x speed) but this was not
reproducable.
The error seems to be the same everytime (see the appended logs).

I'm trying Solaris Sparc and Linux x86, both show similar behaviour (vol
management was switched off on Solaris)

Sunn uname -r gives SunOS xxx 5.9 Generic_122300-35 sun4u sparc
SUNW,Sun-Fire-V440
Linux was 2.6.18 Debian

Has anybody used this drive successfully with cdrecord?
I tried Panasonic media and Sony media (manufacturer is Panasonic) which
were recommended for this drive by the distributor,
I've ordered Verbatim, maybe they perform better.

Do you have any suggestions what I am doing wrong?

Thanks in advance,
Mark


Appendings:

Log of burn error with -v
Log of -v -v -minfo for an empty media


====================================================
Coaster
====================================================

bash-2.05# ./cdrecord -dev=2,1,0 -v /mnt1/OPAS-Archiv/test/burn.img
./cdrecord: No write mode specified.
./cdrecord: Asuming -sao mode.
./cdrecord: If your drive does not accept -sao, try -tao.
./cdrecord: Future versions of cdrecord may have different drive
dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (sparc-sun-solaris2.9) Copyright
(C) 1995-2009 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Warning: Using USCSI interface.
Warning: Volume management is running, medialess managed drives are
invisible.
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : WBUS16 SYNC
Vendor_info    : 'MATSHITA'
Identifikation : 'BD-MLT SW-5582  '
Revision       : 'BZF2'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-R sequential recording (current)
Profile: BD-R random recording
Profile: BD-RE
Profile: BD-ROM
Profile: DVD-RAM
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW restricted overwrite
Profile: DVD-RW sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags   : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO
Drive buf size : 6684672 = 6528 KB
./cdrecord: Warning: The DMA speed test has been skipped.
FIFO size      : 4194304 = 4096 KB
Track 01: data  34216 MB
Total size:     34216 MB = 17518844 sectors
Current Secsize: 2048
Blocks total: 24438784 Blocks current: 24438784 Blocks remaining: 6919940
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 0 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 22651 of 34216 MB written (fifo  95%) [buf 100%]
2.1x../cdrecord: I/O error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 B0 F6 80 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 04 00 B0 E9 C0 0A 00 A7 02 06 03 01 00 00 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x03 Qual 0x01 (no write current) Fru 0x0
Sense flags: Blk 11594176 (valid)
resid: 32768
cmd finished after 0.026s timeout 200s

write track data: error after 23751557120 bytes
./cdrecord: A write error occured.
./cdrecord: Please properly read the error message above.
Writing  time: 2671.429s
Average write speed   3.0x.
Min drive buffer fill was 91%
Fixating...
Fixating time:   14.009s
./cdrecord: fifo had 724968 puts and 724841 gets.
./cdrecord: fifo was 0 times empty and 86706 times full, min fill was 85%.



====================================================
Minfo empty disk
====================================================


bash-2.05# ./cdrecord -dev=2,1,0 -v -v -minfo
Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (sparc-sun-solaris2.9) Copyright
(C) 1995-2009 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Warning: Using USCSI interface.
Warning: Volume management is running, medialess managed drives are
invisible.
Using libscg version 'schily-0.9'.
Using libscg transport code version 'schily-uscsi-1.89'
SCSI buffer size: 64512
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : WBUS16 SYNC
Vendor_info    : 'MATSHITA'
Identifikation : 'BD-MLT SW-5582  '
Revision       : 'BZF2'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-R sequential recording (current)
Profile: BD-R random recording
Profile: BD-RE
Profile: BD-ROM
Profile: DVD-RAM
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW restricted overwrite
Profile: DVD-RW sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Write Protect'
Feature: 'Random Readable'
Feature: 'Multi Read'
Feature: 'CD Read'
Feature: 'DVD Read'
Feature: 'Random Writable'
Feature: 'Incremental Streaming Writable' (current)
Feature: 'Formattable' (current)
Feature: 'Defect Management'
Feature: 'Restricted Overwrite'
Feature: 'DVD+RW'
Feature: 'DVD+R'
Feature: 'Rigid Restricted Overwrite'
Feature: 'CD Track at Once'
Feature: 'CD Mastering'
Feature: 'DVD-R/-RW Write'
Feature: 'Layer Jump Recording'
Feature: 'CD-RW Write'
Feature: 'BD-R Pseudo-Overwrite (POW)'
Feature: 'DVD+R/DL Read'
Feature: 'BD Read' (current)
Feature: 'BD Write' (current)
Feature: 'Power Management' (current) (persistent)
Feature: 'S.M.A.R.T.'
Feature: 'CD Audio analog play'
Feature: 'Microcode Upgrade'
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'
Feature: 'Real Time Streaming'
Feature: 'Logical Unit Serial Number' (current) (persistent)    Serial:
'KC001969'
Feature: 'Disk Control Blocks'
Feature: 'DVD CPRM'
Feature: 'AACS' (current)
Drive current speed: 2
Drive default speed: 2
Drive max speed    : 2
Selected speed     : 2
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags   : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO
Drive buf size : 6684672 = 6528 KB
./cdrecord: Warning: The DMA speed test has been skipped.
Track 1 start 0
01 00 A0 00 00 00 00 01 00 00 00 00
01 00 A1 00 00 00 00 00 00 00 00 00
01 00 A2 00 00 00 00 00 02 00 00 00
Current Secsize: 2048
resid: 36
Supported BD (readable) structures: 00 09 0A C0 FF
Page 00 read        (40) len 4098
Page 08 read        (40) len 2050
Page 09 read        (40) len 6
Page 0A read        (40) len 14
Page 0F      write  (80) len 20
Page 12 read        (40) len 32770
Page 30 read/write  (C0) len 63490
Page 80 read        (40) len 34
Page 81 read        (40) len 34
Page 82 read        (40) len 34
Page C0 read        (40) len 6
Disk type:          'BDR' (BD-R)
Disk class:         01
Manufacturer:       'MEI'
Media type:         'T01'
Disk:               is not in cartridge
Media cartrige:     write protect is off
Free Spare Blocks:  0
Alloc Spare Blocks: 0
rzone size:         40
rzone number:       1
border number:      1
ljrs:               0
track mode:         4 copy: 0
damage:             0
reserved track:     0 blank: 1 incremental: 1 fp: 0
data mode:          1
lra valid:          0
nwa valid:          1
rzone start:        0
next wr addr:       0
free blocks:        24438784
blocking factor:    32
rzone size:         24438784
last recorded addr: 0
read compat lba:    0

   Capacity  Blklen/Sparesz.  Format-type  Type
   24438784           413696         0x00  Unformated or Blank Media
   23652352            24576         0x00  Reserved (0)
   23652352                0         0x32  Reserved (0)
   11200512                0         0x32  Reserved (0)
   24307712                0         0x32  Reserved (0)
CD write parameter: 3F 41 00 08 00 00 00 00 00 00 08 00 05 32 41 04 08
00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CD write parameter: 3F 41 00 08 00 00 00 00 00 00 08 00 05 32 42 04 08
00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Mounted media class:      BD
Mounted media type:       BD-R sequential recording
Disk Is not erasable
data type:                standard
disk status:              empty
session status:           empty
BG format status:         none
first track:              1
number of sessions:       1
first track in last sess: 1
last track in last sess:  1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD

Track  Sess Type   Start Addr End Addr   Size
==============================================
rzone size:         40
rzone number:       1
border number:      1
ljrs:               0
track mode:         4 copy: 0
damage:             0
reserved track:     0 blank: 1 incremental: 1 fp: 0
data mode:          1
lra valid:          0
nwa valid:          1
rzone start:        0
next wr addr:       0
free blocks:        24438784
blocking factor:    32
rzone size:         24438784
last recorded addr: 0
read compat lba:    0
   1     1 Blank  0          24438783   24438784         -1

Next writable address:              0
Remaining writable size:            24438784




--






_______________________________________________
Cdrecord-support mailing list
Cdrecord-support@...
https://lists.berlios.de/mailman/listinfo/cdrecord-support

[Joerg Schilling-3]

Mark Williams <mark@...> wrote:

> Hi all,
>
> I'm trying to use a Panasonic SW-5582C and the actual cdrecord release
> for burning large UDF images (30-40GB).
> Burning of media fails in 9 of 10 tries, in dummy mode as in real mode too.
>
> The abort occurs sometimes quick, sometimes half way through the image
> file of 33 GB.
> One burn process has been successfull (using 1x speed) but this was not
> reproducable.
> The error seems to be the same everytime (see the appended logs).
>
> I'm trying Solaris Sparc and Linux x86, both show similar behaviour (vol
> management was switched off on Solaris)
>
> Sunn uname -r gives SunOS xxx 5.9 Generic_122300-35 sun4u sparc
> SUNW,Sun-Fire-V440
> Linux was 2.6.18 Debian
>
> Has anybody used this drive successfully with cdrecord?
> I tried Panasonic media and Sony media (manufacturer is Panasonic) which
> were recommended for this drive by the distributor,
> I've ordered Verbatim, maybe they perform better.
>
> Do you have any suggestions what I am doing wrong?
>
> Thanks in advance,
> Mark
>
>
> Appendings:
>
> Log of burn error with -v
> Log of -v -v -minfo for an empty media
>
>
> ====================================================
> Coaster
> ====================================================
>
> bash-2.05# ./cdrecord -dev=2,1,0 -v /mnt1/OPAS-Archiv/test/burn.img
> ./cdrecord: No write mode specified.
> ./cdrecord: Asuming -sao mode.
> ./cdrecord: If your drive does not accept -sao, try -tao.
> ./cdrecord: Future versions of cdrecord may have different drive
> dependent defaults.
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (sparc-sun-solaris2.9) Copyright
> (C) 1995-2009 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '2,1,0'
> scsibus: 2 target: 1 lun: 0
> Warning: Using USCSI interface.
> Warning: Volume management is running, medialess managed drives are
> invisible.
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 64512
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 2
> Response Format: 2
> Capabilities   : WBUS16 SYNC
> Vendor_info    : 'MATSHITA'
> Identifikation : 'BD-MLT SW-5582  '
> Revision       : 'BZF2'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: BD-R sequential recording
> Profile: BD-R sequential recording (current)
> Profile: BD-R random recording
> Profile: BD-RE
> Profile: BD-ROM
> Profile: DVD-RAM
> Profile: DVD+R/DL
> Profile: DVD+R
> Profile: DVD+RW
> Profile: DVD-RW restricted overwrite
> Profile: DVD-RW sequential recording
> Profile: DVD-R/DL layer jump recording
> Profile: DVD-R/DL sequential recording
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Profile: Removable Disk
> Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
> Driver flags   : NO-CD BD MMC-3 BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 6684672 = 6528 KB
> ./cdrecord: Warning: The DMA speed test has been skipped.
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  34216 MB
> Total size:     34216 MB = 17518844 sectors
> Current Secsize: 2048
> Blocks total: 24438784 Blocks current: 24438784 Blocks remaining: 6919940
> Reducing transfer size from 64512 to 32768 bytes.
> Starting to write CD/DVD/BD at speed 0 in real SAO mode for single session.
> Last chance to quit, starting real write    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 0
> Track 01: 22651 of 34216 MB written (fifo  95%) [buf 100%]
> 2.1x../cdrecord: I/O error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 B0 F6 80 00 00 10 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F1 00 04 00 B0 E9 C0 0A 00 A7 02 06 03 01 00 00 00 00
> Sense Key: 0x4 Hardware Error, deferred error, Segment 0
> Sense Code: 0x03 Qual 0x01 (no write current) Fru 0x0
> Sense flags: Blk 11594176 (valid)
> resid: 32768
> cmd finished after 0.026s timeout 200s
>
> write track data: error after 23751557120 bytes

It seems that there is a hardwar problem in the drive while writing to the
medium.

Is it possible that your drive did overheat?

Jörg

--
 EMail:joerg@... (home) Jörg Schilling D-13353 Berlin
       js@...                (uni)  
       joerg.schilling@... (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily
_______________________________________________
Cdrecord-support mailing list
Cdrecord-support@...
https://lists.berlios.de/mailman/listinfo/cdrecord-support

[Mark Williams-18]

Hi Joerg, thank you for your quick response!

This behaviour is probably not correlated to temp, it occurs on two
different SW-5582 drives
(one is lying in free air above my PC ...).

It seems to be a hardware problem, I've got the drive specific result
codes for this drive:
(they differ from mmc specifications...)

04/03/01 PERIPHERAL DEVICE WRITE FAULT - TRACKING SERVO FAILURE

But I can reproduce this behaviour on two different drives with
different Firmware, so I am rather clueless right now.
It seems to me that BluRay drives need an activation of the defect
management, but I am not sure how to manage this.
Dvd+rw-Tools call a format command prior to burning, but the source code
seems broken, I doesn't work for BD-R media.

So I am poking here and there now, has anybody has successfully used
this drive (for large images)?

Thanks,
Mark

> Mark Williams <mark@...> wrote:
>
>  
>> Hi all,
>>
>> I'm trying to use a Panasonic SW-5582C and the actual cdrecord release
>> for burning large UDF images (30-40GB).
>> Burning of media fails in 9 of 10 tries, in dummy mode as in real mode too.
>>
>> The abort occurs sometimes quick, sometimes half way through the image
>> file of 33 GB.
>> One burn process has been successfull (using 1x speed) but this was not
>> reproducable.
>> The error seems to be the same everytime (see the appended logs).
>>
>> I'm trying Solaris Sparc and Linux x86, both show similar behaviour (vol
>> management was switched off on Solaris)
>>
>> Sunn uname -r gives SunOS xxx 5.9 Generic_122300-35 sun4u sparc
>> SUNW,Sun-Fire-V440
>> Linux was 2.6.18 Debian
>>
>> Has anybody used this drive successfully with cdrecord?
>> I tried Panasonic media and Sony media (manufacturer is Panasonic) which
>> were recommended for this drive by the distributor,
>> I've ordered Verbatim, maybe they perform better.
>>
>> Do you have any suggestions what I am doing wrong?
>>
>> Thanks in advance,
>> Mark
>>
>>
>> Appendings:
>>
>> Log of burn error with -v
>> Log of -v -v -minfo for an empty media
>>
>>
>> ====================================================
>> Coaster
>> ====================================================
>>
>> bash-2.05# ./cdrecord -dev=2,1,0 -v /mnt1/OPAS-Archiv/test/burn.img
>> ./cdrecord: No write mode specified.
>> ./cdrecord: Asuming -sao mode.
>> ./cdrecord: If your drive does not accept -sao, try -tao.
>> ./cdrecord: Future versions of cdrecord may have different drive
>> dependent defaults.
>> Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (sparc-sun-solaris2.9) Copyright
>> (C) 1995-2009 Jörg Schilling
>> TOC Type: 1 = CD-ROM
>> scsidev: '2,1,0'
>> scsibus: 2 target: 1 lun: 0
>> Warning: Using USCSI interface.
>> Warning: Volume management is running, medialess managed drives are
>> invisible.
>> Using libscg version 'schily-0.9'.
>> SCSI buffer size: 64512
>> atapi: 0
>> Device type    : Removable CD-ROM
>> Version        : 2
>> Response Format: 2
>> Capabilities   : WBUS16 SYNC
>> Vendor_info    : 'MATSHITA'
>> Identifikation : 'BD-MLT SW-5582  '
>> Revision       : 'BZF2'
>> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
>> Current: BD-R sequential recording
>> Profile: BD-R sequential recording (current)
>> Profile: BD-R random recording
>> Profile: BD-RE
>> Profile: BD-ROM
>> Profile: DVD-RAM
>> Profile: DVD+R/DL
>> Profile: DVD+R
>> Profile: DVD+RW
>> Profile: DVD-RW restricted overwrite
>> Profile: DVD-RW sequential recording
>> Profile: DVD-R/DL layer jump recording
>> Profile: DVD-R/DL sequential recording
>> Profile: DVD-R sequential recording
>> Profile: DVD-ROM
>> Profile: CD-RW
>> Profile: CD-R
>> Profile: CD-ROM
>> Profile: Removable Disk
>> Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
>> Driver flags   : NO-CD BD MMC-3 BURNFREE
>> Supported modes: PACKET SAO
>> Drive buf size : 6684672 = 6528 KB
>> ./cdrecord: Warning: The DMA speed test has been skipped.
>> FIFO size      : 4194304 = 4096 KB
>> Track 01: data  34216 MB
>> Total size:     34216 MB = 17518844 sectors
>> Current Secsize: 2048
>> Blocks total: 24438784 Blocks current: 24438784 Blocks remaining: 6919940
>> Reducing transfer size from 64512 to 32768 bytes.
>> Starting to write CD/DVD/BD at speed 0 in real SAO mode for single session.
>> Last chance to quit, starting real write    0 seconds. Operation starts.
>> Waiting for reader process to fill input buffer ... input buffer ready.
>> Starting new track at sector: 0
>> Track 01: 22651 of 34216 MB written (fifo  95%) [buf 100%]
>> 2.1x../cdrecord: I/O error. write_g1: scsi sendcmd: no error
>> CDB:  2A 00 00 B0 F6 80 00 00 10 00
>> status: 0x2 (CHECK CONDITION)
>> Sense Bytes: F1 00 04 00 B0 E9 C0 0A 00 A7 02 06 03 01 00 00 00 00
>> Sense Key: 0x4 Hardware Error, deferred error, Segment 0
>> Sense Code: 0x03 Qual 0x01 (no write current) Fru 0x0
>> Sense flags: Blk 11594176 (valid)
>> resid: 32768
>> cmd finished after 0.026s timeout 200s
>>
>> write track data: error after 23751557120 bytes
>>    
>
> It seems that there is a hardwar problem in the drive while writing to the
> medium.
>
> Is it possible that your drive did overheat?
>
> Jörg
>
>  

--
_________________
Store!
Media Engineering
Mark Williams
Österstr. 3
25764 Wesselburen
Germany

info@...
Fon: [phone]
Fax: [phone]


_______________________________________________
Cdrecord-support mailing list
Cdrecord-support@...
https://lists.berlios.de/mailman/listinfo/cdrecord-support