CWS printerpullpages now ready for QA

View: New views
10 Messages — Rating Filter:   Alert me  

CWS printerpullpages now ready for QA

by Philipp Lohmann :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi,

CWS printerpullpages is now in state "ready for QA". Since there are a
lot of tasks to verify in this CWS the QA-Rep would appreciate any help
he can get in verifying this CWS.

Of course anybody else is invited playing with this CWS build, too.
There are the following tasks known that will be fixed after
printerpullpages has been integrated; some of these are string changes,
some contain UI details the UX discussion brought no final results on,
and a few small known issues are in there, too.

ID Summary
104528 [cws printerpullpages] printing from page preview is confusi
105299 [CWS printerpullpages] printing does not use paper tray sett
106196 [CWS printerpullpages] tooltips on dialog page "Impress" hav
104312 CWS printerpullpages: Do not print graphics and diagrams inc
104784 printerpullpages: preview of HTML source view renders differ
105055 [CWS Printerpullpages] problem with tiled printing
105067 [CWS printerpullpages] For small pages OOo does not recalcul
105434 [CWS printerpullpages] unwanted scaling when printing 2 DIN
105727 printerpullpages Disable Note options as long as no notes ar
105728 printerpullpages - Disable the Selection button as long as n
106192 printerpullpages - Unnecessary error alert by canceling prin
104934 [CWS printerpullpages] Disable Size-settings for N-Up printi
105730 printerpullpages - Selektion won't recognized

for those interested there are current install sets for Windows,
Linux(Intel), Solaris(Sparc) and Mac(Intel) at

ftp://qa-upload.services.openoffice.org/printerpullpages

Kind regards, pl

--
Sanity is just a bad excuse for a lack of imagination.
      -- Author unknown

Registered Office: Sun Microsystems GmbH, Sonnenallee 1, D-85551
Kirchheim-Heimstetten
Commercial register of the Local Court of Munich: HRB 161028
Managing Directors: Thomas Schröder, Wolfgang Engels, Wolf Frenkel
Chairman of the Supervisory Board: Martin Häring

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: CWS printerpullpages now ready for QA

by Uwe Altmann-3 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi Philip

Philipp Lohmann schrieb:

> ID     Summary
> 104528     [cws printerpullpages] printing from page preview is confusi
> 105299     [CWS printerpullpages] printing does not use paper tray sett
> 106196     [CWS printerpullpages] tooltips on dialog page "Impress" hav
> 104312     CWS printerpullpages: Do not print graphics and diagrams inc
> 104784     printerpullpages: preview of HTML source view renders differ
> 105055     [CWS Printerpullpages] problem with tiled printing
> 105067     [CWS printerpullpages] For small pages OOo does not recalcul
> 105434     [CWS printerpullpages] unwanted scaling when printing 2 DIN
> 105727     printerpullpages Disable Note options as long as no notes ar
> 105728     printerpullpages - Disable the Selection button as long as n
> 106192     printerpullpages - Unnecessary error alert by canceling prin
> 104934     [CWS printerpullpages] Disable Size-settings for N-Up printi
> 105730     printerpullpages - Selektion won't recognized

Got it, used it on maac intel 10.5 - looks fine. What has to be tested?
All issues if they are fixed? Or is there some test procedure described?

--
Mit freundlichen Grüßen

Uwe Altmann

OpenOffice.org auf dem Mac:
http://porting.openoffice.org/mac/

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: CWS printerpullpages now ready for QA

by Philipp Lohmann :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi,

it has been brought to my attention that the issue list posted could be
mistaken for fixed issues; that is not the case. The list I posted was
meant to be a list of issues that are already known - and therefore
need created as duplicates - and will be fixed as a follow up. For a
list of tasks that are fixed in CWS printerpullpages please look here:

http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=true&OpenOnly=false&Section=Tasks

Sorry for the inconvenience.

Kind regards, pl

Philipp Lohmann wrote:

> Hi,
>
> CWS printerpullpages is now in state "ready for QA". Since there are a
> lot of tasks to verify in this CWS the QA-Rep would appreciate any help
> he can get in verifying this CWS.
>
> Of course anybody else is invited playing with this CWS build, too.
> There are the following tasks known that will be fixed after
> printerpullpages has been integrated; some of these are string changes,
> some contain UI details the UX discussion brought no final results on,
> and a few small known issues are in there, too.
>
> ID     Summary
> 104528     [cws printerpullpages] printing from page preview is confusi
> 105299     [CWS printerpullpages] printing does not use paper tray sett
> 106196     [CWS printerpullpages] tooltips on dialog page "Impress" hav
> 104312     CWS printerpullpages: Do not print graphics and diagrams inc
> 104784     printerpullpages: preview of HTML source view renders differ
> 105055     [CWS Printerpullpages] problem with tiled printing
> 105067     [CWS printerpullpages] For small pages OOo does not recalcul
> 105434     [CWS printerpullpages] unwanted scaling when printing 2 DIN
> 105727     printerpullpages Disable Note options as long as no notes ar
> 105728     printerpullpages - Disable the Selection button as long as n
> 106192     printerpullpages - Unnecessary error alert by canceling prin
> 104934     [CWS printerpullpages] Disable Size-settings for N-Up printi
> 105730     printerpullpages - Selektion won't recognized
>
> for those interested there are current install sets for Windows,
> Linux(Intel), Solaris(Sparc) and Mac(Intel) at
>
> ftp://qa-upload.services.openoffice.org/printerpullpages
>
> Kind regards, pl
>


--
Sanity is just a bad excuse for a lack of imagination.
      -- Author unknown

Registered Office: Sun Microsystems GmbH, Sonnenallee 1, D-85551
Kirchheim-Heimstetten
Commercial register of the Local Court of Munich: HRB 161028
Managing Directors: Thomas Schröder, Wolfgang Engels, Wolf Frenkel
Chairman of the Supervisory Board: Martin Häring

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: [ux-discuss] Re: CWS printerpullpages now ready for QA

by Joost Andrae :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi,

> it has been brought to my attention that the issue list posted could be
> mistaken for fixed issues; that is not the case. The list I posted was
> meant to be a list of issues that are already known - and therefore need
> created as duplicates - and will be fixed as a follow up. For a list of
> tasks that are fixed in CWS printerpullpages please look here:
>
> http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=true&OpenOnly=false&Section=Tasks 
>
>
> Sorry for the inconvenience.
>

for your convenience take this link (doesn't need a logon):
http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=true&OpenOnly=false&Section=Tasks

Kind regards, Joost

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: Re: [ux-discuss] Re: CWS printerpullpages now ready for QA

by Thomas Hackert :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hello Joost, *,
On Mon, Oct 26, 2009 at 06:10:54PM +0100, Joost Andrae wrote:

> >it has been brought to my attention that the issue list posted
> >could be mistaken for fixed issues; that is not the case. The list
> >I posted was meant to be a list of issues that are already known -
> >and therefore need created as duplicates - and will be fixed as a
> >follow up. For a list of tasks that are fixed in CWS
> >printerpullpages please look here:
> >
> >http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=true&OpenOnly=false&Section=Tasks
> >
> >Sorry for the inconvenience.
>
> for your convenience take this link (doesn't need a logon):
> http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=true&OpenOnly=false&Section=Tasks

if I use this link in IceWeasel, I get the message: "Your session is
outdated. Please logon first. The page you requested will
automatically be loaded afterwards.". If I look more precisely at
the links above, it seems, that they are both the same, aren't they
;? C&P error?
Have fun
Thomas.

--
Sodd's Second Law:
        Sooner or later, the worst possible set of circumstances is
        bound to occur.

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: Re: [ux-discuss] Re: CWS printerpullpages now ready for QA

by Bircher Florian :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Thomas Hackert schrieb:
> if I use this link in IceWeasel, I get the message: "Your session is
> outdated. Please logon first. The page you requested will
> automatically be loaded afterwards.". If I look more precisely at
> the links above, it seems, that they are both the same, aren't they
> ;? C&P error?
> Have fun
> Thomas.
>  
If you look more closely there is a &logon=true ;) try it with false :
 http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=false&OpenOnly=false&Section=Tasks

Have fun
-Florian

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: Re: [ux-discuss] Re: CWS printerpullpages now ready for QA

by Thomas Hackert :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hello Florian, *,
On Mon, Oct 26, 2009 at 08:01:47PM +0100, Bircher Florian wrote:

> Thomas Hackert schrieb:
> > if I use this link in IceWeasel, I get the message: "Your session is
> > outdated. Please logon first. The page you requested will
> > automatically be loaded afterwards.". If I look more precisely at
> > the links above, it seems, that they are both the same, aren't they
> > ;? C&P error?
> > Have fun
> > Thomas.
> >  
> If you look more closely there is a &logon=true ;) try it with false :
>  http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=false&OpenOnly=false&Section=Tasks

ah, thanks :) As I am not using EIS on a daily base, I have not seen
this ... Or maybe I was to tired ... ;)
Thanks for your hint
Thomas.

--
                        HOW TO PROVE IT, PART 1
proof by example:
        The author gives only the case n = 2 and suggests that it
        contains most of the ideas of the general proof.
proof by intimidation:
        'Trivial'.
proof by vigorous handwaving:
        Works well in a classroom or seminar setting.

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: CWS printerpullpages now ready for QA

by Thorsten Ziehm :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi Phillip,

thanks for sending this complex feature again to the QA and other
projects for testing and playing ;-). It's the best way to get such
important new feature well tested before integration.

I have one question about the next steps. As you wrote the CWS is in
state 'ready for QA' now. Is this an iteration before the known issues
will be fixed in the CWS -> state will change the 'new' again? Or is it
planned to integrate the feature with these known issues and fix them
later (when nobody declare one of the issues as stopper)?

Thorsten


On 10/26/09 14:14, Philipp Lohmann wrote:

> Hi,
>
> CWS printerpullpages is now in state "ready for QA". Since there are a
> lot of tasks to verify in this CWS the QA-Rep would appreciate any help
> he can get in verifying this CWS.
>
> Of course anybody else is invited playing with this CWS build, too.
> There are the following tasks known that will be fixed after
> printerpullpages has been integrated; some of these are string changes,
> some contain UI details the UX discussion brought no final results on,
> and a few small known issues are in there, too.
>
> ID     Summary
> 104528     [cws printerpullpages] printing from page preview is confusi
> 105299     [CWS printerpullpages] printing does not use paper tray sett
> 106196     [CWS printerpullpages] tooltips on dialog page "Impress" hav
> 104312     CWS printerpullpages: Do not print graphics and diagrams inc
> 104784     printerpullpages: preview of HTML source view renders differ
> 105055     [CWS Printerpullpages] problem with tiled printing
> 105067     [CWS printerpullpages] For small pages OOo does not recalcul
> 105434     [CWS printerpullpages] unwanted scaling when printing 2 DIN
> 105727     printerpullpages Disable Note options as long as no notes ar
> 105728     printerpullpages - Disable the Selection button as long as n
> 106192     printerpullpages - Unnecessary error alert by canceling prin
> 104934     [CWS printerpullpages] Disable Size-settings for N-Up printi
> 105730     printerpullpages - Selektion won't recognized
>
> for those interested there are current install sets for Windows,
> Linux(Intel), Solaris(Sparc) and Mac(Intel) at
>
> ftp://qa-upload.services.openoffice.org/printerpullpages
>
> Kind regards, pl
>

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: CWS printerpullpages now ready for QA

by Thorsten Ziehm :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hi Uwe,

the specification is :
http://wiki.services.openoffice.org/wiki/Printerpullpages

I do not think, that test cases are written until now. If you or others
will help here, please contact jsk or hi. They are the QA-Reps for this
new feature.

Also playing (adhoc-testing [1]) is welcome here. Because it is needed
to check complex or simple documents and also different combinations of
printer settings in the pages. Does all the settings results to the
correct printing layout?

Thorsten

[1] : http://en.wikipedia.org/wiki/Ad_hoc_testing


On 10/26/09 17:33, Uwe Altmann wrote:

> Hi Philip
>
> Philipp Lohmann schrieb:
>> ID     Summary
>> 104528     [cws printerpullpages] printing from page preview is confusi
>> 105299     [CWS printerpullpages] printing does not use paper tray sett
>> 106196     [CWS printerpullpages] tooltips on dialog page "Impress" hav
>> 104312     CWS printerpullpages: Do not print graphics and diagrams inc
>> 104784     printerpullpages: preview of HTML source view renders differ
>> 105055     [CWS Printerpullpages] problem with tiled printing
>> 105067     [CWS printerpullpages] For small pages OOo does not recalcul
>> 105434     [CWS printerpullpages] unwanted scaling when printing 2 DIN
>> 105727     printerpullpages Disable Note options as long as no notes ar
>> 105728     printerpullpages - Disable the Selection button as long as n
>> 106192     printerpullpages - Unnecessary error alert by canceling prin
>> 104934     [CWS printerpullpages] Disable Size-settings for N-Up printi
>> 105730     printerpullpages - Selektion won't recognized
>
> Got it, used it on maac intel 10.5 - looks fine. What has to be tested?
> All issues if they are fixed? Or is there some test procedure described?
>

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...


Re: Re: [ux-discuss] Re: CWS printerpullpages now ready for QA

by Joost Andrae :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Ouch...this was a cut&paste problem. The logon=false was the item I
wanted to communicate.

> If you look more closely there is a &logon=true ;) try it with false :
>  http://tools.services.openoffice.org/EIS2/cws.ShowCWS?Id=7202&logon=false&OpenOnly=false&Section=Tasks

Kind regards, Joost

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...