Nabble - Camel - Users (activemq)

Re: mail component "no folder found" problem still around

2009-11-26T03:08:38Z

Hi

Please try to avoid double posting!
Check your first post for answers and help.

On Thu, Nov 26, 2009 at 11:40 AM, huntc <huntc@...> wrote:

>
> I think that this problem may still be around with 2.1-SNAPSHOT:
>
>
> http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0
>
>
> I noticed that I had a pop3 server outage and then subsequently had a
> similar problem i.e. IllegalStateException, folder not open.
>
> Here's when the outage started.
>
>
> 2009-11-26 11:57:55,316 [: MailComponent] WARN
> ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not
> poll endpoint: pop3://... caused by: Connect failed
> javax.mail.MessagingException: Connect failed;
> nested exception is:
> java.net.NoRouteToHostException: No route to host
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
> at javax.mail.Service.connect(Service.java:288)
> at
> org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
> Caused by: java.net.NoRouteToHostException: No route to host
> at java.net.PlainSocketImpl.socketConnect(Native Method)
> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
> at
> java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
> at java.net.Socket.connect(Socket.java:519)
> at java.net.Socket.connect(Socket.java:469)
> at
> com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
> at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
> at com.sun.mail.pop3.Protocol.(Protocol.java:94)
> at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
> ... 13 more
>
>
> This went on for about a minute or so and there was no more in the log file
> until several hours later - in fact when an email appeared in the INBOX. I
> know this because my personal email account was copied on the email and so I
> have the timestamp.
>
> I then get the following message every time I poll the server and have to
> re-start my application to get over it:
>
>
> 2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer
> - Folder not open
> java.lang.IllegalStateException: Folder not open
> at javax.mail.Folder.getMessages(Folder.java:938)
> at javax.mail.Folder.search(Folder.java:1226)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
>
>
> Looks as though there might be a bug in the Camel Mail component?
>
> Happy to create a JIRA if there is consensus.
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/mail-component-%22no-folder-found%22-problem-still-around-tp26525359p26525359.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>

--
Claus Ibsen
Apache Camel Committer

Author of Camel in Action: http://www.manning.com/ibsen/
Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

mail component "no folder found" problem still around

2009-11-26T02:40:56Z

I think that this problem may still be around with 2.1-SNAPSHOT:

http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0

I noticed that I had a pop3 server outage and then subsequently had a similar problem i.e. IllegalStateException, folder not open. Here's when the outage started.

2009-11-26 11:57:55,316 [: MailComponent] WARN  ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not poll endpoint: pop3://... caused by: Connect failed
javax.mail.MessagingException: Connect failed;
  nested exception is:
        java.net.NoRouteToHostException: No route to host
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
        at javax.mail.Service.connect(Service.java:288)
        at org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
        at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
        at java.net.Socket.connect(Socket.java:519)
        at java.net.Socket.connect(Socket.java:469)
        at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
        at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
        at com.sun.mail.pop3.Protocol.(Protocol.java:94)
        at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
        ... 13 more

This went on for about a minute or so and there was no more in the log file until several hours later - in fact when an email appeared in the INBOX. I know this because my personal email account was copied on the email and so I have the timestamp.

I then get the following message every time I poll the server and have to re-start my application to get over it:

2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer                   - Folder not open
java.lang.IllegalStateException: Folder not open
        at javax.mail.Folder.getMessages(Folder.java:938)
        at javax.mail.Folder.search(Folder.java:1226)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)

Looks as though there might be a bug in the Camel Mail component?

Happy to create a JIRA if there is consensus.

Kind regards,
Christopher

Re: IllegalStateException, folder not open on pop3 mail uri

2009-11-26T02:32:20Z

Hi

Please create the JIRA ticket then I can commit some code for you to
try out with.

On Thu, Nov 26, 2009 at 11:19 AM, huntc <huntc@...> wrote:

>
> I think that this problem may still be around with 2.1-SNAPSHOT:
>
>
> http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0
>
>
> I noticed that I had a pop3 server outage and then subsequently had a
> similar problem i.e. IllegalStateException, folder not open.
>
> Here's when the outage started.
>
>
> 2009-11-26 11:57:55,316 [: MailComponent] WARN
> ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not
> poll endpoint: pop3://... caused by: Connect failed
> javax.mail.MessagingException: Connect failed;
> nested exception is:
> java.net.NoRouteToHostException: No route to host
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
> at javax.mail.Service.connect(Service.java:288)
> at
> org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
> Caused by: java.net.NoRouteToHostException: No route to host
> at java.net.PlainSocketImpl.socketConnect(Native Method)
> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
> at
> java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
> at java.net.Socket.connect(Socket.java:519)
> at java.net.Socket.connect(Socket.java:469)
> at
> com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
> at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
> at com.sun.mail.pop3.Protocol.(Protocol.java:94)
> at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
> ... 13 more
>
>
> This went on for about a minute or so and there was no more in the log file
> until several hours later - in fact when an email appeared in the INBOX. I
> know this because my personal email account was copied on the email and so I
> have the timestamp.
>
> I then get the following message every time I poll the server and have to
> re-start my application to get over it:
>
>
> 2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer
> - Folder not open
> java.lang.IllegalStateException: Folder not open
> at javax.mail.Folder.getMessages(Folder.java:938)
> at javax.mail.Folder.search(Folder.java:1226)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
>
>
> Looks as though there might be a bug in the Camel Mail component?
>
> Happy to create a JIRA if there is consensus.
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/IllegalStateException%2C-folder-not-open-on-pop3-mail-uri-tp26525343p26525343.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>

Re: IllegalStateException, folder not open on pop3 mail uri

2009-11-26T02:31:45Z

Hi

Can you recreate the situation?

Its a bit odd because this code checks whether the folder is open
before it accesses it

// ensure folder is open
if (!folder.isOpen()) {
folder.open(Folder.READ_WRITE);
}

I have added a recreate folder when connecting which I hope should be
able to fix the issue. As it will be getting a fresh folder if the
connection was lost.

On Thu, Nov 26, 2009 at 11:22 AM, huntc <huntc@...> wrote:

>
> I think that this problem may still be around with 2.1-SNAPSHOT:
>
>
> http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0
>
>
> I noticed that I had a pop3 server outage and then subsequently had a
> similar problem i.e. IllegalStateException, folder not open.
>
> Here's when the outage started.
>
>
> 2009-11-26 11:57:55,316 [: MailComponent] WARN
> ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not
> poll endpoint: pop3://... caused by: Connect failed
> javax.mail.MessagingException: Connect failed;
> nested exception is:
> java.net.NoRouteToHostException: No route to host
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
> at javax.mail.Service.connect(Service.java:288)
> at
> org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
> Caused by: java.net.NoRouteToHostException: No route to host
> at java.net.PlainSocketImpl.socketConnect(Native Method)
> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
> at
> java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
> at java.net.Socket.connect(Socket.java:519)
> at java.net.Socket.connect(Socket.java:469)
> at
> com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
> at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
> at com.sun.mail.pop3.Protocol.(Protocol.java:94)
> at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
> at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
> ... 13 more
>
>
> This went on for about a minute or so and there was no more in the log file
> until several hours later - in fact when an email appeared in the INBOX. I
> know this because my personal email account was copied on the email and so I
> have the timestamp.
>
> I then get the following message every time I poll the server and have to
> re-start my application to get over it:
>
>
> 2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer
> - Folder not open
> java.lang.IllegalStateException: Folder not open
> at javax.mail.Folder.getMessages(Folder.java:938)
> at javax.mail.Folder.search(Folder.java:1226)
> at
> org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
> at
> org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
> at
> java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
> at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
> at
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:619)
>
>
> Looks as though there might be a bug in the Camel Mail component?
>
> Happy to create a JIRA if there is consensus.
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/IllegalStateException%2C-folder-not-open-on-pop3-mail-uri-tp26525346p26525346.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>

IllegalStateException, folder not open on pop3 mail uri

2009-11-26T02:22:05Z

I think that this problem may still be around with 2.1-SNAPSHOT:

http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0

I noticed that I had a pop3 server outage and then subsequently had a similar problem i.e. IllegalStateException, folder not open. Here's when the outage started.

2009-11-26 11:57:55,316 [: MailComponent] WARN  ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not poll endpoint: pop3://... caused by: Connect failed
javax.mail.MessagingException: Connect failed;
  nested exception is:
        java.net.NoRouteToHostException: No route to host
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
        at javax.mail.Service.connect(Service.java:288)
        at org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
        at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
        at java.net.Socket.connect(Socket.java:519)
        at java.net.Socket.connect(Socket.java:469)
        at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
        at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
        at com.sun.mail.pop3.Protocol.(Protocol.java:94)
        at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
        ... 13 more

I then get the following message every time I poll the server and have to re-start my application to get over it:

2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer                   - Folder not open
java.lang.IllegalStateException: Folder not open
        at javax.mail.Folder.getMessages(Folder.java:938)
        at javax.mail.Folder.search(Folder.java:1226)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)

Looks as though there might be a bug in the Camel Mail component?

Happy to create a JIRA if there is consensus.

Kind regards,
Christopher

IllegalStateException, folder not open on pop3 mail uri

2009-11-26T02:19:59Z

I think that this problem may still be around with 2.1-SNAPSHOT:

http://fusesource.com/forums/thread.jspa?threadID=746&tstart=0

I noticed that I had a pop3 server outage and then subsequently had a similar problem i.e. IllegalStateException, folder not open. Here's when the outage started.

2009-11-26 11:57:55,316 [: MailComponent] WARN  ultPollingConsumerPollStrategy - Consumer Consumer[pop3://...] could not poll endpoint: pop3://... caused by: Connect failed
javax.mail.MessagingException: Connect failed;
  nested exception is:
        java.net.NoRouteToHostException: No route to host
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
        at javax.mail.Service.connect(Service.java:288)
        at org.apache.camel.component.mail.MailConsumer.ensureIsConnected(MailConsumer.java:241)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:79)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
        at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
        at java.net.Socket.connect(Socket.java:519)
        at java.net.Socket.connect(Socket.java:469)
        at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
        at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
        at com.sun.mail.pop3.Protocol.(Protocol.java:94)
        at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
        at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
        ... 13 more

I then get the following message every time I poll the server and have to re-start my application to get over it:

2009-11-26 19:19:57,293 [: MailComponent] ERROR MailConsumer                   - Folder not open
java.lang.IllegalStateException: Folder not open
        at javax.mail.Folder.getMessages(Folder.java:938)
        at javax.mail.Folder.search(Folder.java:1226)
        at org.apache.camel.component.mail.MailConsumer.poll(MailConsumer.java:107)
        at org.apache.camel.impl.ScheduledPollConsumer.run(ScheduledPollConsumer.java:108)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:317)
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:98)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(ScheduledThreadPoolExecutor.java:181)
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:205)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)

Looks as though there might be a bug in the Camel Mail component?

Happy to create a JIRA if there is consensus.

Kind regards,
Christopher

Re: Dynamically re-schedule a timer or quartz endpoint

2009-11-25T21:18:18Z

On Thu, Nov 26, 2009 at 5:13 AM, huntc <huntc@...> wrote:
>
> Hi there,
>
> Is there a way to dynamically program a timer or quartz endpoint such that
> we can modify when it should fire next?
>

Yeah the timer can be configured using JMX in 2.1. And the same can be
done for quartz if you submit a patch for it.
http://davsclaus.blogspot.com/2009/09/overhaul-of-management-of-apache-camel.html

You can also use the Camel API to change it ay runtime and then
restart the consumer/endpoint combo.

> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/Dynamically-re-schedule-a-timer-or-quartz-endpoint-tp26524123p26524123.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

--
Claus Ibsen
Apache Camel Committer

Author of Camel in Action: http://www.manning.com/ibsen/
Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

Dynamically re-schedule a timer or quartz endpoint

2009-11-25T20:13:00Z

Hi there,

Is there a way to dynamically program a timer or quartz endpoint such that we can modify when it should fire next?

Kind regards,
Christopher

Re: getEndpoints deprecated for 2.1 - please advise why

2009-11-23T00:18:24Z

Hi

I have polished the @deprecation javadoc and marked them for Camel 2.3
giving a bit more time to prepare for this.

On Sun, Nov 22, 2009 at 12:03 PM, huntc <huntc@...> wrote:

>
> Hi Claus,
>
>
> Claus Ibsen-2 wrote:
>>
>> On Sun, Nov 22, 2009 at 7:38 AM, huntc <huntc@...> wrote:
>> There are plenty of other methods on CamelContext to get endpoints. So
>> use any of those.
>> We are trimming down the number of methods on the context to remove
>> methods which are very rarely used (by Camel itself or end users)
>>
>>
>
> OK then.
> --
> View this message in context: http://old.nabble.com/getEndpoints-deprecated-for-2.1---please-advise-why-tp26463149p26464161.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

Re: Quartz dependency missing for 1.6.6

2009-11-22T21:17:38Z

Hi

This morning I did NOT start Nexus (i.e. its NOT running)

Delete the quartz from my local m2 repo
davsclaus:~/.m2/repository$ rm -rf opensymphony/

And did a install on the camel-quarz, as you can see it downloads the .jar again

davsclaus:(svn)camel[trunk:883045]/components/camel-quartz$ mvn clean install
[INFO] Scanning for projects...
[INFO] snapshot org.apache.camel:camel-parent:2.1-SNAPSHOT: checking
for updates from open.iona.m2-all
[INFO] snapshot org.apache.camel:camel:2.1-SNAPSHOT: checking for
updates from open.iona.m2-all
[INFO] ------------------------------------------------------------------------
[INFO] Building Camel :: Quartz
[INFO] task-segment: [clean, install]
[INFO] ------------------------------------------------------------------------
[INFO] [clean:clean]
[INFO] Deleting file set:
/Users/davsclaus/workspace/camel/components/camel-quartz/target
(included: [**], excluded: [])
[INFO] snapshot org.apache.camel:camel-core:2.1-SNAPSHOT: checking for
updates from open.iona.m2-all
[INFO] snapshot org.apache.camel:camel-core:2.1-SNAPSHOT: checking for
updates from apache.snapshots
Downloading: http://repo.open.iona.com/maven2-all/opensymphony/quartz/1.6.6/quartz-1.6.6.pom
190b downloaded
[INFO] snapshot org.apache.camel:camel-test:2.1-SNAPSHOT: checking for
updates from open.iona.m2-all
[INFO] snapshot org.apache.camel:camel-test:2.1-SNAPSHOT: checking for
updates from apache.snapshots
[INFO] snapshot org.apache.camel:camel-spring:2.1-SNAPSHOT: checking
for updates from open.iona.m2-all
[INFO] snapshot org.apache.camel:camel-spring:2.1-SNAPSHOT: checking
for updates from apache.snapshots
Downloading: http://repo.open.iona.com/maven2-all/opensymphony/quartz/1.6.6/quartz-1.6.6.jar
421K downloaded
Downloading: http://repo.open.iona.com/maven2/com/sun/xml/bind/jaxb-impl/2.1.5-dev/jaxb-impl-2.1.5-dev.pom
Downloading: http://localhost:8081/nexus/content/groups/public/com/sun/xml/bind/jaxb-impl/2.1.5-dev/jaxb-impl-2.1.5-dev.pom
Downloading: http://repo.open.iona.com/maven2-all/com/sun/xml/bind/jaxb-impl/2.1.5-dev/jaxb-impl-2.1.5-dev.pom
Downloading: http://localhost:8081/nexus/content/groups/public/com/sun/xml/bind/jaxb-impl/2.1.5-dev/jaxb-impl-2.1.5-dev.pom
Downloading: http://repo.open.iona.com/maven2/com/sun/xml/bind/jaxb-xjc/2.1.5-dev/jaxb-xjc-2.1.5-dev.pom
Downloading: http://localhost:8081/nexus/content/groups/public/com/sun/xml/bind/jaxb-xjc/2.1.5-dev/jaxb-xjc-2.1.5-dev.pom
Downloading: http://repo.open.iona.com/maven2-all/com/sun/xml/bind/jaxb-xjc/2.1.5-dev/jaxb-xjc-2.1.5-dev.pom
Downloading: http://localhost:8081/nexus/content/groups/public/com/sun/xml/bind/jaxb-xjc/2.1.5-dev/jaxb-xjc-2.1.5-dev.pom
[INFO] [antrun:run {execution: create-prop}]
[INFO] Executing tasks
[echo] Maven version: 2.1-SNAPSHOT
[echo] OSGi version: 2.1.0.SNAPSHOT
[mkdir] Created dir:
/Users/davsclaus/workspace/camel/components/camel-quartz/target
[INFO] Executed tasks
[INFO] [properties:read-project-properties {execution: default}]
[INFO] Setting property: classpath.resource.loader.class =>
'org.codehaus.plexus.velocity.ContextClassLoaderResourceLoader'.
[INFO] Setting property: velocimacro.messages.on => 'false'.
[INFO] Setting property: resource.loader => 'classpath'.
[INFO] Setting property: resource.manager.logwhenfound => 'false'.
[INFO] [remote-resources:process {execution: default}]
[INFO] [resources:resources]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 3 resources
[INFO] Copying 3 resources
[INFO] [compiler:compile]
[INFO] Compiling 7 source files to
/Users/davsclaus/workspace/camel/components/camel-quartz/target/classes
[INFO] [resources:testResources]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 1 resource
[INFO] Copying 3 resources
[INFO] [compiler:testCompile]
[INFO] Compiling 6 source files to
/Users/davsclaus/workspace/camel/components/camel-quartz/target/test-classes
[INFO] [surefire:test]
[INFO] Surefire report directory:
/Users/davsclaus/workspace/camel/components/camel-quartz/target/surefire-reports

-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running org.apache.camel.component.quartz.QuartzEndpointConfigureTest
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.954 sec
Running org.apache.camel.component.quartz.StatefulQuartzRouteTest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.483 sec
Running org.apache.camel.component.quartz.QuartzCronRouteTest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 3.715 sec
Running org.apache.camel.component.quartz.QuartzRouteTest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.296 sec
Running org.apache.camel.component.quartz.QuartzComponentTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.061 sec
Running org.apache.camel.component.quartz.QuartzEndpointTest
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.283 sec

Results :

Tests run: 10, Failures: 0, Errors: 0, Skipped: 0

On Sun, Nov 22, 2009 at 11:48 PM, huntc <huntc@...> wrote:

>
> Perhaps there's something that I don't understand about Nexus here, but if I
> use my public-snapshots profile then I see that Maven searches as follows:
>
> nexus (http://repo.classactionpl.com:8081/nexus/content/groups/public),
> nexus-public-snapshots
> (http://repo.classactionpl.com:8081/nexus/content/groups/public-snapshots)
>
> It does not find Quartz. However if I then add the fusesource dependences
> repo (http://repo.fusesource.com/maven2-all/) to my nexus config as a proxy
> and then associate the proxy with my public group all is well.
>
> I suspect that your Nexus configuration has a proxy configured for
> fusesource which is why you are not seeing the issue.
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/Quartz-dependency-missing-for-1.6.6-tp26462662p26470422.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

Re: Quartz dependency missing for 1.6.6

2009-11-22T14:48:25Z

Perhaps there's something that I don't understand about Nexus here, but if I use my public-snapshots profile then I see that Maven searches as follows:

nexus (http://repo.classactionpl.com:8081/nexus/content/groups/public),
nexus-public-snapshots (http://repo.classactionpl.com:8081/nexus/content/groups/public-snapshots)

It does not find Quartz. However if I then add the fusesource dependences repo (http://repo.fusesource.com/maven2-all/) to my nexus config as a proxy and then associate the proxy with my public group all is well.

I suspect that your Nexus configuration has a proxy configured for fusesource which is why you are not seeing the issue.

Kind regards,
Christopher

Re: Quartz dependency missing for 1.6.6

2009-11-22T12:47:12Z

Hi Claus,

I think that the problem was that I did not have your repo configured as a proxy in Nexus. If I wasn't using Nexus then things probably would have worked straight away.

I'll conduct some more tests this morning. However it would still be a good idea to remove that your repo dependency.

Kind regards,
Christopher

Re: Quartz dependency missing for 1.6.6

2009-11-22T04:55:30Z

Hi

Do you still have issues? The pom.xml file in camel-quartz do have a
<repostitory> which points to the repo where the 1.6.6 is located.
For example camel-quickfix uses the same repo for its .jar.

On Sun, Nov 22, 2009 at 11:52 AM, huntc <huntc@...> wrote:

>
> I performed an install via my local Nexus repo - perhaps that confused things
> (may be I'd misconfigured something there - or perhaps I need to add the
> fuse repo to my local Nexus instance).
>
> That said, perhaps it'd be worth getting the Opensymphony guys to upload
> 1.6.6 to the central repo in case others encounter this same issue... or may
> be use v.1.6.3 instead?
>
> Thanks.
> --
> View this message in context: http://old.nabble.com/Quartz-dependency-missing-for-1.6.6-tp26462662p26464159.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

Re: getEndpoints deprecated for 2.1 - please advise why

2009-11-22T03:03:28Z

Hi Claus,

Claus Ibsen-2 wrote:

On Sun, Nov 22, 2009 at 7:38 AM, huntc <huntc@mac.com> wrote:
There are plenty of other methods on CamelContext to get endpoints. So
use any of those.
We are trimming down the number of methods on the context to remove
methods which are very rarely used (by Camel itself or end users)

OK then.

Re: Quartz dependency missing for 1.6.6

2009-11-22T02:52:23Z

I performed an install via my local Nexus repo - perhaps that confused things (may be I'd misconfigured something there - or perhaps I need to add the fuse repo to my local Nexus instance).

That said, perhaps it'd be worth getting the Opensymphony guys to upload 1.6.6 to the central repo in case others encounter this same issue... or may be use v.1.6.3 instead?

Thanks.

Re: getEndpoints deprecated for 2.1 - please advise why

2009-11-22T02:21:18Z

Hi

We could probably move some of those rarely used methods to CamelContextHelper.

On Sun, Nov 22, 2009 at 8:56 AM, Claus Ibsen <claus.ibsen@...> wrote:

> On Sun, Nov 22, 2009 at 7:38 AM, huntc <huntc@...> wrote:
>>
>> Hi,
>>
>> I'm using the following method on the camel context:
>>
>>
>> Collection<?> cardReaderEndpoints =
>> exchange.getContext().getEndpoints(bgReaderListenerURI);
>>
>>
>> I note that with 2.1 this is marked as being deprecated. The source code
>> states:
>>
>>
>> makes no sense, is removed in Camel 2.2
>>
>
> There are plenty of other methods on CamelContext to get endpoints. So
> use any of those.
> We are trimming down the number of methods on the context to remove
> methods which are very rarely used (by Camel itself or end users)
>
>
>
>>
>> Well, the deprecation makes no sense to me! %-|
>>
>> I use the above method call to return a list of endpoints connected on a tcp
>> socket (MINA). How else might I do this?
>>
>> Kind regards,
>> Christopher
>> --
>> View this message in context: http://old.nabble.com/getEndpoints-deprecated-for-2.1---please-advise-why-tp26463149p26463149.html
>> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>>
>
>
>
> --
> Claus Ibsen
> Apache Camel Committer
>
> Author of Camel in Action: http://www.manning.com/ibsen/
> Open Source Integration: http://fusesource.com
> Blog: http://davsclaus.blogspot.com/
> Twitter: http://twitter.com/davsclaus
>

Re: Quartz dependency missing for 1.6.6

2009-11-22T00:26:42Z

Hi

I nuked my m2 repo and build from fresh (using nexus as cache)

[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESSFUL
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 27 minutes 1 second
[INFO] Finished at: Sun Nov 22 09:29:11 CET 2009
[INFO] Final Memory: 138M/461M
[INFO] ------------------------------------------------------------------------
davsclaus:(svn)camel[trunk:883045]/$

On Sun, Nov 22, 2009 at 4:57 AM, huntc <huntc@...> wrote:

>
> Hi guys,
>
> I'm attempting to build against the 2.1-SNAPSHOT at the moment and
> experience:
>
> Missing indirectly referenced artifact opensymphony:quartz:jar:1.6.6:compile
>
> I see that 1.6.6 is a fairly new release and may not yet have made it to any
> well known repos. Any advice on this?
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/Quartz-dependency-missing-for-1.6.6-tp26462662p26462662.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

Re: Quartz dependency missing for 1.6.6

2009-11-21T23:56:57Z

On Sun, Nov 22, 2009 at 8:44 AM, Claus Ibsen <claus.ibsen@...> wrote:

> On Sun, Nov 22, 2009 at 4:57 AM, huntc <huntc@...> wrote:
>>
>> Hi guys,
>>
>> I'm attempting to build against the 2.1-SNAPSHOT at the moment and
>> experience:
>>
>> Missing indirectly referenced artifact opensymphony:quartz:jar:1.6.6:compile
>>
>> I see that 1.6.6 is a fairly new release and may not yet have made it to any
>> well known repos. Any advice on this?
>>
>
> Its in this repo
> http://repo.fusesource.com/maven2-all/opensymphony/quartz/1.6.6/
>
> I wonder if that repo was missing in the pom.xml of quartz. Let me check.
>

Its included in the pom.xml. Maybe you need to do a full clean build
to get it working.

>> Kind regards,
>> Christopher
>> --
>> View this message in context: http://old.nabble.com/Quartz-dependency-missing-for-1.6.6-tp26462662p26462662.html
>> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>>
>>
>
>
>
> --
> Claus Ibsen
> Apache Camel Committer
>
> Author of Camel in Action: http://www.manning.com/ibsen/
> Open Source Integration: http://fusesource.com
> Blog: http://davsclaus.blogspot.com/
> Twitter: http://twitter.com/davsclaus
>

Re: getEndpoints deprecated for 2.1 - please advise why

2009-11-21T23:56:19Z

On Sun, Nov 22, 2009 at 7:38 AM, huntc <huntc@...> wrote:

>
> Hi,
>
> I'm using the following method on the camel context:
>
>
> Collection<?> cardReaderEndpoints =
> exchange.getContext().getEndpoints(bgReaderListenerURI);
>
>
> I note that with 2.1 this is marked as being deprecated. The source code
> states:
>
>
> makes no sense, is removed in Camel 2.2
>

There are plenty of other methods on CamelContext to get endpoints. So
use any of those.
We are trimming down the number of methods on the context to remove
methods which are very rarely used (by Camel itself or end users)

>
> Well, the deprecation makes no sense to me! %-|
>
> I use the above method call to return a list of endpoints connected on a tcp
> socket (MINA). How else might I do this?
>
> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/getEndpoints-deprecated-for-2.1---please-advise-why-tp26463149p26463149.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>

Re: Quartz dependency missing for 1.6.6

2009-11-21T23:44:13Z

On Sun, Nov 22, 2009 at 4:57 AM, huntc <huntc@...> wrote:

Its in this repo
http://repo.fusesource.com/maven2-all/opensymphony/quartz/1.6.6/

I wonder if that repo was missing in the pom.xml of quartz. Let me check.

> Kind regards,
> Christopher
> --
> View this message in context: http://old.nabble.com/Quartz-dependency-missing-for-1.6.6-tp26462662p26462662.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

--
Claus Ibsen
Apache Camel Committer

Author of Camel in Action: http://www.manning.com/ibsen/
Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

getEndpoints deprecated for 2.1 - please advise why

2009-11-21T22:38:12Z

Hi,

I'm using the following method on the camel context:

Collection cardReaderEndpoints = 
  exchange.getContext().getEndpoints(bgReaderListenerURI);

I note that with 2.1 this is marked as being deprecated. The source code states:

makes no sense, is removed in Camel 2.2

Well, the deprecation makes no sense to me!

I use the above method call to return a list of endpoints connected on a tcp socket (MINA). How else might I do this?

Kind regards,
Christopher

Quartz dependency missing for 1.6.6

2009-11-21T19:57:45Z

Hi guys,

I'm attempting to build against the 2.1-SNAPSHOT at the moment and experience:

Missing indirectly referenced artifact opensymphony:quartz:jar:1.6.6:compile

I see that 1.6.6 is a fairly new release and may not yet have made it to any well known repos. Any advice on this?

Kind regards,
Christopher

Re: Unable to set Camel Route JMSReplyTo

2009-11-08T20:06:30Z

The camel version I'm using is 2.0.0.

Hi Claus,

If I put the settings in the following way, then I'll be able to see the replyTo header is 'queue://FirstQueue' in the responseQ.

<camel:route>
<camel:from uri="tcpActivemq:queue:requestQ?exchangePattern=InOut&useMessageIDAsCorrelationID=true" />
<camel:to uri="bean:mqInputProcessor"/>
<camel:to uri="bean:JBPMProcessorBean"/>
<camel:to uri="bean:mqOutputProcessor"/>
<camel:to uri="tcpActivemq:queue:responseQ?replyTo=queue:FirstQueue" />
</camel:route>

Thanks.

Regards,
William

cwilliamy2k wrote:

The following is the settings in my camel-context.xml. I have set the replyTo option to a queue named "Q3", but when I look into the message in Q2 at ActiveMQ admin console, the replyTo header is null.

<camel:route>
<camel:from uri="AMQ:queue:Q1" />
<camel:to uri="bean:Dummy"/>
<camel:to uri="AMQ:queue:Q2?replyTo=queue:Q3"/>
</camel:route>

Pls help. Thanks.

Re: Unable to set Camel Route JMSReplyTo

2009-11-08T20:05:39Z

Hi Claus,

If I put the settings in the following way, then I'll be able to see the replyTo header is 'queue://FirstQueue' in the responseQ.

<camel:route>
<camel:from uri="tcpActivemq:queue:requestQ?exchangePattern=InOut&useMessageIDAsCorrelationID=true" />
<camel:to uri="bean:mqInputProcessor"/>
<camel:to uri="bean:JBPMProcessorBean"/>
<camel:to uri="bean:mqOutputProcessor"/>
<camel:to uri="tcpActivemq:queue:responseQ?replyTo=queue:FirstQueue" />
</camel:route>

Thanks.

Regards,
William

cwilliamy2k wrote:

The following is the settings in my camel-context.xml. I have set the replyTo option to a queue named "Q3", but when I look into the message in Q2 at ActiveMQ admin console, the replyTo header is null.

<camel:route>
<camel:from uri="AMQ:queue:Q1" />
<camel:to uri="bean:Dummy"/>
<camel:to uri="AMQ:queue:Q2?replyTo=queue:Q3"/>
</camel:route>

Pls help. Thanks.

Re: Unable to set Camel Route JMSReplyTo

2009-11-04T23:08:36Z

Hi

Try with latest snapshot code as I believe its fixed by CAMEL-2089

On Thu, Nov 5, 2009 at 7:57 AM, cwilliamy2k <cwilliamy2k@...> wrote:

>
> The following is the settings in my camel-context.xml. I have set the replyTo
> option to a queue named "Q3", but when I look into the message in Q2 at
> ActiveMQ admin console, the replyTo header is null.
>
> <camel:route>
> <camel:from uri="AMQ:queue:Q1" />
> <camel:to uri="bean:Dummy"/>
> <camel:to uri="AMQ:queue:Q2?replyTo=queue:Q3"/>
> </camel:route>
>
> Pls help. Thanks.
> --
> View this message in context: http://old.nabble.com/Unable-to-set-Camel-Route-JMSReplyTo-tp26208592p26208592.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

Unable to set Camel Route JMSReplyTo

2009-11-04T22:57:17Z

The following is the settings in my camel-context.xml. I have set the replyTo option to a queue named "Q3", but when I look into the message in Q2 at ActiveMQ admin console, the replyTo header is null.

<camel:route>
<camel:from uri="AMQ:queue:Q1" />
<camel:to uri="bean:Dummy"/>
<camel:to uri="AMQ:queue:Q2?replyTo=queue:Q3"/>
</camel:route>

Pls help. Thanks.

Re: explicitly setting replyTo doesn't scale with .threads() and JMS cache.

2009-10-23T01:09:08Z

Hi

Also use option concurrentConsumers on the JMS endpoint to support
concurrency, instead of threads.

On Wed, Oct 21, 2009 at 2:58 PM, Claus Ibsen <claus.ibsen@...> wrote:

> Hi
>
> Maybe this ticket can give some hints
> https://issues.apache.org/activemq/browse/CAMEL-490
>
> On Wed, Oct 21, 2009 at 2:15 PM, Eric Bouer <ericbouer@...> wrote:
>>
>> Hello.
>> In order to optimize my InOut throughput I added explicit replyTo on my JMS
>> endpoint.
>> This doesn't seems to be well behaving with camel threads and spring JMS
>> caching.
>> The following test case shows the problem.
>> remove the explicit replyTo and everything works fine.
>> your comments are welcome.
>>
>> ================
>>
>> import java.util.concurrent.ExecutorService;
>> import java.util.concurrent.Executors;
>> import java.util.concurrent.Callable;
>> import javax.jms.TextMessage;
>> import javax.jms.Destination;
>> import javax.jms.Message;
>> import javax.jms.Session;
>> import javax.jms.JMSException;
>>
>> import org.apache.activemq.ActiveMQConnectionFactory;
>> import org.apache.camel.Exchange;
>> import org.apache.camel.Processor;
>> import org.apache.camel.CamelContext;
>> import org.apache.camel.component.mock.MockEndpoint;
>> import org.apache.camel.builder.RouteBuilder;
>> import org.apache.activemq.camel.component.ActiveMQComponent;
>> import org.apache.camel.ExchangePattern;
>> import org.apache.camel.test.CamelTestSupport;
>> import org.springframework.jms.connection.CachingConnectionFactory;
>> import org.springframework.jms.core.JmsTemplate;
>> import org.springframework.jms.core.MessageCreator;
>> import static
>> org.apache.activemq.camel.component.ActiveMQComponent.activeMQComponent;
>>
>> /**
>> * Unit test using a fixed replyTo specified on the JMS endpoint
>> *
>> * @version $Revision: 791824 $
>> */
>> public class JmsJMSReplyToEndpointUsingInOutTest extends CamelTestSupport {
>>
>> private ActiveMQComponent amq;
>> private static String MQURI = "failover:(tcp://localhost:61616)";
>> // private static String MQURI =
>> "vm://localhost?broker.persistent=false&broker.useJmx=false";
>>
>> public class Replier implements Callable {
>>
>> @Override
>> public Object call() throws Exception {
>> log.info("replier started");
>> JmsTemplate jms = new
>> JmsTemplate(amq.getConfiguration().getConnectionFactory());
>>
>> final TextMessage msg = (TextMessage)
>> jms.receive("nameRequestor");
>> assertEquals("What's your name", msg.getText());
>>
>> // there should be a JMSReplyTo so we know where to send the
>> reply
>> final Destination replyTo = msg.getJMSReplyTo();
>>
>> // send reply
>> // Thread.sleep(10000);
>> jms.send(replyTo, new MessageCreator() {
>> public Message createMessage(Session session) throws
>> JMSException {
>> TextMessage replyMsg = session.createTextMessage();
>> replyMsg.setText("My name is Arnio");
>>
>> replyMsg.setJMSCorrelationID(msg.getJMSCorrelationID());
>> return replyMsg;
>> }
>> });
>> return null;
>> }
>> };
>> public void testCustomJMSReplyToInOut() throws Exception {
>>
>> MockEndpoint mock = getMockEndpoint("mock:result");
>> mock.expectedBodiesReceived("My name is Arnio");
>> mock.expectedMessageCount(10);
>> // do not use Camel to send and receive to simulate a non Camel
>> client
>> // use another thread to listen and send the reply
>> ExecutorService newFixedThreadPool =
>> Executors.newFixedThreadPool(20);
>>
>> for (int i = 0 ; i < 10 ; i++) {
>> newFixedThreadPool.submit(new Replier());
>> }
>>
>> // now get started and send the first message that gets the ball
>> rolling
>> JmsTemplate jms = new
>> JmsTemplate(amq.getConfiguration().getConnectionFactory());
>> for (int i = 0 ; i < 10 ; i++) {
>> jms.send("hello", new MessageCreator() {
>> public Message createMessage(Session session) throws
>> JMSException {
>> TextMessage msg = session.createTextMessage();
>> msg.setText("Hello, I'm here");
>> return msg;
>> }
>>
>> });
>>
>> log.info("Hello sent");
>> Thread.sleep(10);
>> }
>>
>> Thread.sleep(5000);
>> assertMockEndpointsSatisfied();
>> }
>>
>> protected RouteBuilder createRouteBuilder() throws Exception {
>> return new RouteBuilder() {
>>
>> public void configure() throws Exception {
>> from("activemq:queue:hello")
>> .threads()
>> .process(new Processor() {
>> public void process(Exchange exchange) throws
>> Exception {
>>
>> exchange.getOut().setBody("What's your name");
>> }
>> })
>> // use in out to get a reply as well
>>
>> .to(ExchangePattern.InOut,
>> "activemq:queue:nameRequestor?replyTo=queue:namedReplyQueue) // Remove the
>> replyTo and eveything works well
>> .to("direct:replyprocessor");
>>
>> from("direct:replyprocessor").process(new Processor() {
>> public void process(Exchange exchange) throws
>> Exception {
>> System.out.println("Here I am processing the
>> reply " + exchange.getIn().getBody());
>> }
>> }).to("mock:result");
>> }
>> };
>> }
>>
>> protected CamelContext createCamelContext() throws Exception {
>> CamelContext camelContext = super.createCamelContext();
>> amq = activeMQComponent(MQURI);
>> ActiveMQConnectionFactory targetFactory = new
>> ActiveMQConnectionFactory(MQURI);
>> log.info("Using MQ CachingConnectionFactory");
>> CachingConnectionFactory cachedAMQConnectionFactory = new
>> CachingConnectionFactory(targetFactory);
>>
>> camelContext.addComponent("activemq",
>> ActiveMQComponent.jmsComponent(cachedAMQConnectionFactory));
>>
>> return camelContext;
>> }
>>
>>
>> }
>>
>> ===========
>> --
>> View this message in context: http://www.nabble.com/explicitly-setting-replyTo-doesn%27t-scale-with-.threads%28%29-and-JMS-cache.-tp25991334p25991334.html
>> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>>
>>
>
>
>
> --
> Claus Ibsen
> Apache Camel Committer
>
> Open Source Integration: http://fusesource.com
> Blog: http://davsclaus.blogspot.com/
> Twitter: http://twitter.com/davsclaus
>

Re: request reply with sql query

2009-10-23T01:07:57Z

On Wed, Oct 21, 2009 at 2:31 PM, linuca <linuca@...> wrote:

>
> Hi,
>
> I tested the resquest/replay example from ActiveMQ (without using Camel) and
> it worked fine, so I don't think there is something wrong with the
> connection.
>
> So I assume there is something wrong with my Camel code? Can anyone tell me
> what I'm doing wrong?
>

You can try the Camel JMS tutorial which does routing over JMS between
a client and a server
http://camel.apache.org/tutorial-jmsremoting.html

> Thanks.
> --
> View this message in context: http://www.nabble.com/request-reply-with-sql-query-tp25958657p25991585.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

--
Claus Ibsen
Apache Camel Committer

Author of Camel in Action: http://www.manning.com/ibsen/
Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

Re: explicitly setting replyTo doesn't scale with .threads() and JMS cache.

2009-10-21T05:58:03Z

Hi

Maybe this ticket can give some hints
https://issues.apache.org/activemq/browse/CAMEL-490

On Wed, Oct 21, 2009 at 2:15 PM, Eric Bouer <ericbouer@...> wrote:

>
> Hello.
> In order to optimize my InOut throughput I added explicit replyTo on my JMS
> endpoint.
> This doesn't seems to be well behaving with camel threads and spring JMS
> caching.
> The following test case shows the problem.
> remove the explicit replyTo and everything works fine.
> your comments are welcome.
>
> ================
>
> import java.util.concurrent.ExecutorService;
> import java.util.concurrent.Executors;
> import java.util.concurrent.Callable;
> import javax.jms.TextMessage;
> import javax.jms.Destination;
> import javax.jms.Message;
> import javax.jms.Session;
> import javax.jms.JMSException;
>
> import org.apache.activemq.ActiveMQConnectionFactory;
> import org.apache.camel.Exchange;
> import org.apache.camel.Processor;
> import org.apache.camel.CamelContext;
> import org.apache.camel.component.mock.MockEndpoint;
> import org.apache.camel.builder.RouteBuilder;
> import org.apache.activemq.camel.component.ActiveMQComponent;
> import org.apache.camel.ExchangePattern;
> import org.apache.camel.test.CamelTestSupport;
> import org.springframework.jms.connection.CachingConnectionFactory;
> import org.springframework.jms.core.JmsTemplate;
> import org.springframework.jms.core.MessageCreator;
> import static
> org.apache.activemq.camel.component.ActiveMQComponent.activeMQComponent;
>
> /**
> * Unit test using a fixed replyTo specified on the JMS endpoint
> *
> * @version $Revision: 791824 $
> */
> public class JmsJMSReplyToEndpointUsingInOutTest extends CamelTestSupport {
>
> private ActiveMQComponent amq;
> private static String MQURI = "failover:(tcp://localhost:61616)";
> // private static String MQURI =
> "vm://localhost?broker.persistent=false&broker.useJmx=false";
>
> public class Replier implements Callable {
>
> @Override
> public Object call() throws Exception {
> log.info("replier started");
> JmsTemplate jms = new
> JmsTemplate(amq.getConfiguration().getConnectionFactory());
>
> final TextMessage msg = (TextMessage)
> jms.receive("nameRequestor");
> assertEquals("What's your name", msg.getText());
>
> // there should be a JMSReplyTo so we know where to send the
> reply
> final Destination replyTo = msg.getJMSReplyTo();
>
> // send reply
> // Thread.sleep(10000);
> jms.send(replyTo, new MessageCreator() {
> public Message createMessage(Session session) throws
> JMSException {
> TextMessage replyMsg = session.createTextMessage();
> replyMsg.setText("My name is Arnio");
>
> replyMsg.setJMSCorrelationID(msg.getJMSCorrelationID());
> return replyMsg;
> }
> });
> return null;
> }
> };
> public void testCustomJMSReplyToInOut() throws Exception {
>
> MockEndpoint mock = getMockEndpoint("mock:result");
> mock.expectedBodiesReceived("My name is Arnio");
> mock.expectedMessageCount(10);
> // do not use Camel to send and receive to simulate a non Camel
> client
> // use another thread to listen and send the reply
> ExecutorService newFixedThreadPool =
> Executors.newFixedThreadPool(20);
>
> for (int i = 0 ; i < 10 ; i++) {
> newFixedThreadPool.submit(new Replier());
> }
>
> // now get started and send the first message that gets the ball
> rolling
> JmsTemplate jms = new
> JmsTemplate(amq.getConfiguration().getConnectionFactory());
> for (int i = 0 ; i < 10 ; i++) {
> jms.send("hello", new MessageCreator() {
> public Message createMessage(Session session) throws
> JMSException {
> TextMessage msg = session.createTextMessage();
> msg.setText("Hello, I'm here");
> return msg;
> }
>
> });
>
> log.info("Hello sent");
> Thread.sleep(10);
> }
>
> Thread.sleep(5000);
> assertMockEndpointsSatisfied();
> }
>
> protected RouteBuilder createRouteBuilder() throws Exception {
> return new RouteBuilder() {
>
> public void configure() throws Exception {
> from("activemq:queue:hello")
> .threads()
> .process(new Processor() {
> public void process(Exchange exchange) throws
> Exception {
>
> exchange.getOut().setBody("What's your name");
> }
> })
> // use in out to get a reply as well
>
> .to(ExchangePattern.InOut,
> "activemq:queue:nameRequestor?replyTo=queue:namedReplyQueue) // Remove the
> replyTo and eveything works well
> .to("direct:replyprocessor");
>
> from("direct:replyprocessor").process(new Processor() {
> public void process(Exchange exchange) throws
> Exception {
> System.out.println("Here I am processing the
> reply " + exchange.getIn().getBody());
> }
> }).to("mock:result");
> }
> };
> }
>
> protected CamelContext createCamelContext() throws Exception {
> CamelContext camelContext = super.createCamelContext();
> amq = activeMQComponent(MQURI);
> ActiveMQConnectionFactory targetFactory = new
> ActiveMQConnectionFactory(MQURI);
> log.info("Using MQ CachingConnectionFactory");
> CachingConnectionFactory cachedAMQConnectionFactory = new
> CachingConnectionFactory(targetFactory);
>
> camelContext.addComponent("activemq",
> ActiveMQComponent.jmsComponent(cachedAMQConnectionFactory));
>
> return camelContext;
> }
>
>
> }
>
> ===========
> --
> View this message in context: http://www.nabble.com/explicitly-setting-replyTo-doesn%27t-scale-with-.threads%28%29-and-JMS-cache.-tp25991334p25991334.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

--
Claus Ibsen
Apache Camel Committer

Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

Re: request reply with sql query

2009-10-21T05:31:06Z

Hi,

I tested the resquest/replay example from ActiveMQ (without using Camel) and it worked fine, so I don't think there is something wrong with the connection.

So I assume there is something wrong with my Camel code? Can anyone tell me what I'm doing wrong?

Thanks.

explicitly setting replyTo doesn't scale with .threads() and JMS cache.

2009-10-21T05:15:47Z

Hello.
In order to optimize my InOut throughput I added explicit replyTo on my JMS endpoint.
This doesn't seems to be well behaving with camel threads and spring JMS caching.
The following test case shows the problem.
remove the explicit replyTo and everything works fine.
your comments are welcome.

================

import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;
import java.util.concurrent.Callable;
import javax.jms.TextMessage;
import javax.jms.Destination;
import javax.jms.Message;
import javax.jms.Session;
import javax.jms.JMSException;

import org.apache.activemq.ActiveMQConnectionFactory;
import org.apache.camel.Exchange;
import org.apache.camel.Processor;
import org.apache.camel.CamelContext;
import org.apache.camel.component.mock.MockEndpoint;
import org.apache.camel.builder.RouteBuilder;
import org.apache.activemq.camel.component.ActiveMQComponent;
import org.apache.camel.ExchangePattern;
import org.apache.camel.test.CamelTestSupport;
import org.springframework.jms.connection.CachingConnectionFactory;
import org.springframework.jms.core.JmsTemplate;
import org.springframework.jms.core.MessageCreator;
import static org.apache.activemq.camel.component.ActiveMQComponent.activeMQComponent;

/**
* Unit test using a fixed replyTo specified on the JMS endpoint
*
* @version $Revision: 791824 $
*/
public class JmsJMSReplyToEndpointUsingInOutTest extends CamelTestSupport {

private ActiveMQComponent amq;
private static String MQURI = "failover:(tcp://localhost:61616)";
// private static String MQURI = "vm://localhost?broker.persistent=false&broker.useJmx=false";

public class Replier implements Callable {

@Override
public Object call() throws Exception {
log.info("replier started");
JmsTemplate jms = new JmsTemplate(amq.getConfiguration().getConnectionFactory());

final TextMessage msg = (TextMessage) jms.receive("nameRequestor");
assertEquals("What's your name", msg.getText());

// there should be a JMSReplyTo so we know where to send the reply
final Destination replyTo = msg.getJMSReplyTo();

// send reply
// Thread.sleep(10000);
jms.send(replyTo, new MessageCreator() {
public Message createMessage(Session session) throws JMSException {
TextMessage replyMsg = session.createTextMessage();
replyMsg.setText("My name is Arnio");
replyMsg.setJMSCorrelationID(msg.getJMSCorrelationID());
return replyMsg;
}
});
return null;
}
};
public void testCustomJMSReplyToInOut() throws Exception {

MockEndpoint mock = getMockEndpoint("mock:result");
mock.expectedBodiesReceived("My name is Arnio");
mock.expectedMessageCount(10);
// do not use Camel to send and receive to simulate a non Camel client
// use another thread to listen and send the reply
ExecutorService newFixedThreadPool = Executors.newFixedThreadPool(20);

for (int i = 0 ; i < 10 ; i++) {
newFixedThreadPool.submit(new Replier());
}

// now get started and send the first message that gets the ball rolling
JmsTemplate jms = new JmsTemplate(amq.getConfiguration().getConnectionFactory());
for (int i = 0 ; i < 10 ; i++) {
jms.send("hello", new MessageCreator() {
public Message createMessage(Session session) throws JMSException {
TextMessage msg = session.createTextMessage();
msg.setText("Hello, I'm here");
return msg;
}

});

log.info("Hello sent");
Thread.sleep(10);
}

Thread.sleep(5000);
assertMockEndpointsSatisfied();
}

protected RouteBuilder createRouteBuilder() throws Exception {
return new RouteBuilder() {

public void configure() throws Exception {
from("activemq:queue:hello")
.threads()
.process(new Processor() {
public void process(Exchange exchange) throws Exception {

exchange.getOut().setBody("What's your name");
}
})
// use in out to get a reply as well

.to(ExchangePattern.InOut, "activemq:queue:nameRequestor?replyTo=queue:namedReplyQueue) // Remove the replyTo and eveything works well
.to("direct:replyprocessor");

from("direct:replyprocessor").process(new Processor() {
public void process(Exchange exchange) throws Exception {
System.out.println("Here I am processing the reply " + exchange.getIn().getBody());
}
}).to("mock:result");
}
};
}

protected CamelContext createCamelContext() throws Exception {
CamelContext camelContext = super.createCamelContext();
amq = activeMQComponent(MQURI);
ActiveMQConnectionFactory targetFactory = new ActiveMQConnectionFactory(MQURI);
log.info("Using MQ CachingConnectionFactory");
CachingConnectionFactory cachedAMQConnectionFactory = new CachingConnectionFactory(targetFactory);

camelContext.addComponent("activemq", ActiveMQComponent.jmsComponent(cachedAMQConnectionFactory));

return camelContext;
}

}

===========

Re: request reply with sql query

2009-10-20T07:08:33Z

Hi, thanks for the hint.

This is what I get in the activemq log.

Is this because the queue expired before it got the message?

<code>
Sending: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - Received WireFormat: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33508 before negotiation: OpenWireFormat{version=3, cacheEnabled=false, stackTraceEnabled=false, tightEncodingEnabled=false, sizePrefixDisabled=false}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33508 after negotiation: OpenWireFormat{version=3, cacheEnabled=true, stackTraceEnabled=true, tightEncodingEnabled=true, sizePrefixDisabled=false}
DEBUG TransportConnection - Setting up new connection: /192.168.0.4:33508
DEBUG AbstractRegion - Adding consumer: ID:mendoza04-53640-1256046824338-0:0:-1:1
DEBUG AbstractRegion - Adding consumer: ID:mendoza04-53640-1256046824338-0:0:1:1
DEBUG AbstractRegion - Adding destination: topic://ActiveMQ.Advisory.Consumer.Queue.test.queue
DEBUG WireFormatNegotiator - Received WireFormat: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - Sending: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33509 before negotiation: OpenWireFormat{version=3, cacheEnabled=false, stackTraceEnabled=false, tightEncodingEnabled=false, sizePrefixDisabled=false}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33509 after negotiation: OpenWireFormat{version=3, cacheEnabled=true, stackTraceEnabled=true, tightEncodingEnabled=true, sizePrefixDisabled=false}
DEBUG TransportConnection - Setting up new connection: /192.168.0.4:33509
DEBUG AbstractRegion - Adding consumer: ID:mendoza04-53640-1256046824338-0:1:-1:1
DEBUG AbstractRegion - Adding destination: temp-queue://ID:mendoza04-53640-1256046824338-0:1:1
DEBUG AbstractRegion - Adding destination: topic://ActiveMQ.Advisory.TempQueue
DEBUG AbstractRegion - Adding consumer: ID:mendoza04-53640-1256046824338-0:1:1:1
DEBUG AbstractRegion - Adding destination: topic://ActiveMQ.Advisory.Consumer.Queue.ID:mendoza04-53640-1256046824338-0:1:1
DEBUG WireFormatNegotiator - Received WireFormat: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - Sending: WireFormatInfo { version=3, properties={TightEncodingEnabled=true, CacheSize=1024, TcpNoDelayEnabled=true, SizePrefixDisabled=false, StackTraceEnabled=true, MaxInactivityDurationInitalDelay=10000, MaxInactivityDuration=30000, CacheEnabled=true}, magic=[A,c,t,i,v,e,M,Q]}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33510 before negotiation: OpenWireFormat{version=3, cacheEnabled=false, stackTraceEnabled=false, tightEncodingEnabled=false, sizePrefixDisabled=false}
DEBUG WireFormatNegotiator - tcp:///192.168.0.4:33510 after negotiation: OpenWireFormat{version=3, cacheEnabled=true, stackTraceEnabled=true, tightEncodingEnabled=true, sizePrefixDisabled=false}
DEBUG TransportConnection - Setting up new connection: /192.168.0.4:33510
DEBUG AbstractRegion - Adding consumer: ID:mendoza04-53640-1256046824338-0:2:-1:1
DEBUG AbstractRegion - Adding destination: topic://ActiveMQ.Advisory.Producer.Queue.test.queue
DEBUG RegionBroker - Message expired ActiveMQTextMessage {commandId = 5, responseRequired = true, messageId = ID:mendoza04-53640-1256046824338-0:2:1:1:1, originalDestination = null, originalTransactionId = null, producerId = ID:mendoza04-53640-1256046824338-0:2:1:1, destination = queue://test.queue, transactionId = null, expiration = 1256046844866, timestamp = 1256046824866, arrival = 0, brokerInTime = 1256046883092, brokerOutTime = 0, correlationId = ID-mendoza04/44477-1256046824630/2-0, replyTo = temp-queue://ID:mendoza04-53640-1256046824338-0:1:1, persistent = true, type = null, priority = 4, groupID = null, groupSequence = 0, targetConsumerId = null, compressed = false, userID = null, content = null, marshalledProperties = null, dataStructure = null, redeliveryCounter = 0, size = 0, properties = null, readOnlyProperties = false, readOnlyBody = false, droppable = false, text = select * from clients}
DEBUG AMQMessageStore - Journalled message add for: ID:mendoza04-53640-1256046824338-0:2:1:1:1, at: offset = 3751, file = 1, size = 452, type = 1
DEBUG AMQMessageStore - Doing batch update... adding: 1 removing: 0
DEBUG AbstractRegion - Adding destination: topic://ActiveMQ.Advisory.Expired.Queue.test.queue
DEBUG AMQMessageStore - Batch update done.
DEBUG AbstractRegion - Removing consumer: ID:mendoza04-53640-1256046824338-0:2:-1:1
DEBUG TransportConnection - Stopping connection: /192.168.0.4:33510
DEBUG TcpTransport - Stopping transport tcp:///192.168.0.4:33510
DEBUG TransportConnection - Stopped transport: /192.168.0.4:33510
DEBUG TransportConnection - Connection Stopped: /192.168.0.4:33510
DEBUG AMQPersistenceAdapter - Checkpoint started.
DEBUG AMQPersistenceAdapter - Marking journal at: offset = 3751, file = 1, size = 452, type = 1
DEBUG AMQPersistenceAdapter - Checkpoint done.
DEBUG AMQPersistenceAdapter - dataFilesInProgress.values: (0) []
DEBUG AMQPersistenceAdapter - lastDataFile: 1
DEBUG AsyncDataManager - lastFileId=0, purgeList: (0) []
DEBUG InactivityMonitor - 9999 ms elapsed since last write check.
DEBUG InactivityMonitor - 10000 ms elapsed since last write check.
</code>

Cheers.

Re: request reply with sql query

2009-10-20T06:16:20Z

On Tue, Oct 20, 2009 at 3:13 PM, linuca <linuca@...> wrote:

>
> Hi,
>
> I run into another problem. If I run the standalone app of activemq in
> another host in my network, it just does no receive the messages.
>
> 1. I changed "localhost" to the real ip addres.
>
> ActiveMQConnectionFactory connectionFactory = new
> ActiveMQConnectionFactory("tcp://192.168.0.1:61616");
>
> 2. I made sure that activemq was running.
> 3. The tcp port is not blocked by a firewall.
>
> The error I see in the tomcat log is the following:
>
> org.apache.camel.RuntimeCamelException:
> org.apache.camel.ExchangeTimedOutException: The OUT message was not received
> within: 20000 millis on the exchange: Exchange[JmsMessage: select
> * from clients]
> at
> org.apache.camel.util.ObjectHelper.wrapRuntimeCamelException(ObjectHelper.java:724)
> at
> org.apache.camel.impl.DefaultProducerTemplate.extractResultBody(DefaultProducerTemplate.java:334)
> at
> org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:98)
> at
> org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:113)
> at
> org.apache.camel.impl.DefaultProducerTemplate.requestBody(DefaultProducerTemplate.java:176)
>
> It works if it is in the same localhost.
> Any ideas?
> --

Look at the logs on the server.

It doesnt send a response back (on that temporary jms queue).
Could be some exception happening on the server.

> View this message in context: http://www.nabble.com/request-reply-with-sql-query-tp25958657p25974866.html
> Sent from the Camel - Users (activemq) mailing list archive at Nabble.com.
>
>

--
Claus Ibsen
Apache Camel Committer

Open Source Integration: http://fusesource.com
Blog: http://davsclaus.blogspot.com/
Twitter: http://twitter.com/davsclaus

Re: request reply with sql query

2009-10-20T06:13:51Z

Hi,

I run into another problem. If I run the standalone app of activemq in another host in my network, it just does no receive the messages.

1. I changed "localhost" to the real ip addres.

ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory("tcp://192.168.0.1:61616");

2. I made sure that activemq was running.
3. The tcp port is not blocked by a firewall.

The error I see in the tomcat log is the following:

org.apache.camel.RuntimeCamelException: org.apache.camel.ExchangeTimedOutException: The OUT message was not received within: 20000 millis on the exchange: Exchange[JmsMessage: select
* from clients]
at org.apache.camel.util.ObjectHelper.wrapRuntimeCamelException(ObjectHelper.java:724)
at org.apache.camel.impl.DefaultProducerTemplate.extractResultBody(DefaultProducerTemplate.java:334)
at org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:98)
at org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:113)
at org.apache.camel.impl.DefaultProducerTemplate.requestBody(DefaultProducerTemplate.java:176)

It works if it is in the same localhost.
Any ideas?

Re: copy database records and insert them in another database

2009-10-19T12:18:09Z

Hi,

I read about iBatis and tested some examples. But I think it is too complex for what I try to achieve.

Now I just send an SQL query as a message from a Master class to a Slave class (in a different host). The latter executes it and stores the records in a List, and then sends the List back with the result.

Thanks for the help.