Let's connect on LinkedIn

2009-12-09T15:48:15Z

I'd like to add you to my professional network on LinkedIn.

- Tyler Smart

Every day, millions of professionals like Tyler Smart use LinkedIn to connect with colleagues, find experts, and explore opportunities.

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Few CC related questions

2009-11-23T10:32:29Z

Hi guys!

Just started to use CC.rb today, and I like it. I have some questions though:

1. is CC.rb caching a plugin's source file somewhere? I'm asking this because I created a plugin, made some modifications to it, restarted the server, and I still saw the old code. If however, I close everything ( including the command prompt from where I started the cruise server ), it will load the right file. Is there other way to modify a plugin's code and see the modifications take place right away?

2. I wrote a plugin, but I'd like to be able to pass some config options to it, through Project's block. Is there a way to do this without relying on class variables? If I'd create an instance of a plugin, how could I pass it along to the project's list of plugins? Is something like this possible:

Project.configure do |proj|
my_plugin = MyPlugin.new(options)
proj.plugins << proj
end

Thanks!

My blog

Re: How to do a clean check out.

2009-11-19T02:47:01Z

Hi Chad.

Nothing out side of CC is modifying that folder. Its CC that's deleting
it, I guess as the first step of the clean checkout code.
Thanks.

Nick.

-----Original Message-----
From: cruisecontrolrb-users-bounces@...
[mailto:cruisecontrolrb-users-bounces@...] On Behalf Of Chad
Woolley
Sent: 18 November 2009 20:43
To: cruisecontrolrb-users@...
Subject: Re: [Cruisecontrolrb-users] How to do a clean check out.

On Wed, Nov 18, 2009 at 11:36 AM, <Nick.Adamson@...>
wrote:
> Below are the log messages. Any ideas?

Find out what is deleting it and stop it. :)
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

This email and any files attached are intended for the addressee and may contain information of a confidential nature. If you are not the intended recipient, be aware that this email was sent to you in error and you should not disclose, distribute, print, copy or make other use of this email or its attachments. Such actions, in fact, may be unlawful. In compliance with the various Regulations and Acts, General Dynamics United Kingdom Limited reserves the right to monitor (and examine for viruses) all emails and email attachments, both inbound and outbound. Email communications and their attachments may not be secure or error- or virus-free and the company does not accept liability or responsibility for such matters or the consequences thereof. General Dynamics United Kingdom Limited, Registered Office: 100 New Bridge Street, London EC4V 6JA. Registered in England and Wales No: 1911653.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: How to do a clean check out.

2009-11-18T12:42:49Z

On Wed, Nov 18, 2009 at 11:36 AM, <Nick.Adamson@...> wrote:
> Below are the log messages. Any ideas?

Find out what is deleting it and stop it. :)
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: How to do a clean check out.

2009-11-18T10:36:16Z

Hi Chad.

Having looked in to this further what appears to be happening is that
the project/work folder is being deleted and then CC isn't able to work
out where it should be checking stuff out from.
Below are the log messages. Any ideas?
This log was generated by:
Stopping CC,
Making sure the ATIS-windows/work folder was there and was at revision
2473.
Starting CC.

Thanks.
Nick.

[info] [2009-11-18 16:52:06] Builder for project 'ATIS-Windows' started
[info] [2009-11-18 17:39:48] New revision 2474 detected
[error] Repository location is not specified
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/subversion.rb:35:in `checkout'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/abstract_adapter.rb:30:in
`clean_checkout'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:277:in
`update_project_to_revision'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:274:in `open'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:274:in
`update_project_to_revision'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:303:in
`build_without_serialization'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:289:in `build'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:213:in `build_if_necessary'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/polling_scheduler.rb:13:in `run'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:79
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:78:in `catch'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:78
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:47:in `load'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:47:in `builder'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:10:in `send'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:10:in `run'
[error] ./lib/cruise_control/../../script/../config/../cruise:5
[error] No such file or directory - C:/builds/projects/ATIS-Windows/work
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/abstract_adapter.rb:51:in `chdir'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/abstract_adapter.rb:51:in
`execute_in_local_copy'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/subversion.rb:127:in `svn'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/subversion.rb:111:in `log'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/subversion.rb:59:in
`latest_revision'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../lib/source_control/subversion.rb:66:in `up_to_date?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/change_in_source_control_trigger.rb:11:in
`build_necessary?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:234:in `build_necessary?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:221:in `any?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:234:in `each'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:234:in `any?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:234:in `build_necessary?'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/project.rb:211:in `build_if_necessary'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/../config/../app/models/polling_scheduler.rb:13:in `run'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:79
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:78:in `catch'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/../../
script/builder:78
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:47:in `load'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:47:in `builder'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:10:in `send'
[error]
./lib/cruise_control/../../script/../config/../lib/cruise_control/init.r
b:10:in `run'
[error] ./lib/cruise_control/../../script/../config/../cruise:5

-----Original Message-----
From: cruisecontrolrb-users-bounces@...
[mailto:cruisecontrolrb-users-bounces@...] On Behalf Of Chad
Woolley
Sent: 17 November 2009 15:13
To: cruisecontrolrb-users@...
Subject: Re: [Cruisecontrolrb-users] How to do a clean check out.

On Tue, Nov 17, 2009 at 7:42 AM, <Nick.Adamson@...>
wrote:

Any ideas where I'm going wrong?

Check CCRBs SVN working copy. DO you have files which were modified by
your build which have merge conflicts?

This email and any files attached are intended for the addressee and may contain information of a confidential nature. If you are not the intended recipient, be aware that this email was sent to you in error and you should not disclose, distribute, print, copy or make other use of this email or its attachments. Such actions, in fact, may be unlawful. In compliance with the various Regulations and Acts, General Dynamics United Kingdom Limited reserves the right to monitor (and examine for viruses) all emails and email attachments, both inbound and outbound. Email communications and their attachments may not be secure or error- or virus-free and the company does not accept liability or responsibility for such matters or the consequences thereof. General Dynamics United Kingdom Limited, Registered Office: 100 New Bridge Street, London EC4V 6JA. Registered in England and Wales No: 1911653.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: SSH keeps prompting for a password.

2009-11-18T08:15:01Z

On Wed, Nov 18, 2009 at 7:45 AM, <Nick.Adamson@...> wrote:
> Thanks for pointing me in the write direction.
> I've now generated my keys and need to work out where to put the private
> key file on the windows box running cruisecontrol. The file I've got is
> id_rsa.
> Any ideas?

SSH-fu is pretty basic stuff and outside the scope of this list.
However, it's really useful to know if you are a developer and/or
sysadmin.

Google for "ssh key tutorial" or similar, and look for a good page
which explains it in a way you can understand, and play around until
you understand it. Google for any error messages you don't
understand.

Good Luck,
-- Chad
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: SSH keeps prompting for a password.

2009-11-18T06:45:33Z

Hi Chad.

Thanks for pointing me in the write direction.
I've now generated my keys and need to work out where to put the private
key file on the windows box running cruisecontrol. The file I've got is
id_rsa.
Any ideas?

Thanks.
Nick.

-----Original Message-----
From: cruisecontrolrb-users-bounces@...
[mailto:cruisecontrolrb-users-bounces@...] On Behalf Of Chad
Woolley
Sent: 17 November 2009 15:12
To: cruisecontrolrb-users@...
Subject: Re: [Cruisecontrolrb-users] SSH keeps prompting for a password.

On Tue, Nov 17, 2009 at 7:35 AM, <Nick.Adamson@...>
wrote:

How can I get it to remember the password?

Set up a no-passphrase SSH key.

This email and any files attached are intended for the addressee and may contain information of a confidential nature. If you are not the intended recipient, be aware that this email was sent to you in error and you should not disclose, distribute, print, copy or make other use of this email or its attachments. Such actions, in fact, may be unlawful. In compliance with the various Regulations and Acts, General Dynamics United Kingdom Limited reserves the right to monitor (and examine for viruses) all emails and email attachments, both inbound and outbound. Email communications and their attachments may not be secure or error- or virus-free and the company does not accept liability or responsibility for such matters or the consequences thereof. General Dynamics United Kingdom Limited, Registered Office: 100 New Bridge Street, London EC4V 6JA. Registered in England and Wales No: 1911653.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: How to do a clean check out.

2009-11-17T07:13:18Z

On Tue, Nov 17, 2009 at 7:42 AM, <Nick.Adamson@...> wrote:

Any ideas where I'm going wrong?

Check CCRBs SVN working copy. DO you have files which were modified by your build which have merge conflicts?

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: SSH keeps prompting for a password.

2009-11-17T07:12:00Z

On Tue, Nov 17, 2009 at 7:35 AM, <Nick.Adamson@...> wrote:

How can I get it to remember the password?

Set up a no-passphrase SSH key.

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

How to do a clean check out.

2009-11-17T06:42:35Z

Hi All.

Second and last question from me for at least 5 minutes.

I'm trying to get CruiseControl to do a clean check out from SVN every time it does a build.

I've read the section in the documentation regarding this however when ever I add the following line to my RB script for the project I get errors when trying to view the HTTP server.

The line I'm adding:

project.do_clean_checkout :always

The error I get is:

There has been a problem, we've been notified about it ......

Any ideas where I'm going wrong?

Thanks.

Nick.

Nick Adamson
Software Engineer
General Dynamics United Kingdom Limited
Bryn Brithdir, Oakdale Business Park, Blackwood, South Wales, NP12 4AA
Telephone: +44 (0)1495 23 6467
Email: Nick.Adamson@...
Website: www.generaldynamics.uk.com
To help reduce waste paper, please only print this email if you really need to.

This email and any files attached are intended for the addressee and may contain information of a confidential nature. If you are not the intended recipient, be aware that this email was sent to you in error and you should not disclose, distribute, print, copy or make other use of this email or its attachments. Such actions, in fact, may be unlawful. In compliance with the various Regulations and Acts, General Dynamics United Kingdom Limited reserves the right to monitor (and examine for viruses) all emails and email attachments, both inbound and outbound. Email communications and their attachments may not be secure or error- or virus-free and the company does not accept liability or responsibility for such matters or the consequences thereof. General Dynamics United Kingdom Limited, Registered Office: 100 New Bridge Street, London EC4V 6JA. Registered in England and Wales No: 1911653.

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

SSH keeps prompting for a password.

2009-11-17T06:35:50Z

Hi All.

I'm new to Cruise Control having just taken over a set of build servers which use it to build our software on Windows and Ubuntu Linux.

I'm in the process of making a couple of changes and have run in to a couple of problems which I can't find an answer for in the documentation.

Cruise control is running on a windows box. One of our projects is a build on Linux. Cruise control SSH's in to the Linux server to perform the build.

I've recently had to change the user and password for the account it logs in to.

I've changed the line in the RB file to identify the new user. this seems to be working fine apart from every time cruise control detects a new build in SVN it prompts for the SSH password before continuing with the build.

How can I get it to remember the password?

Thanks.

Nick.

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: a few noob questions

2009-11-04T07:48:05Z

Hi Joe,

1. There's currently no official way to get the dashboard to render
content generated by your test run, if that's what you mean, although
I've seen teams in the past that have modified the CCRB HTML templates
to do that. Do you just want the resulting content to be
pretty-printed as XML?

Yes

2. Likewise, you can modify the build_report.html.erb template to
include whichever pieces of the build you wish. Note that you have the
full Build object available to you at email render time. At the moment
EmailNotifier doesn't support more fine-grained template
specification, but you can subclass that plugin to do the right thing
if you need to support multiple templates.

3. Projects can be triggered by the successful completion of other
projects, as follows:

project.triggered_by :some_other_project

You can set up an automatic deploy workflow by adding a project whose
build command is the command you typically use to deploy your app and
which is triggered by the successful completion of the first build.
Does that help?

Yes it does, thank you. :)

Re: a few noob questions

2009-11-03T23:50:17Z

Hi Joe,

1. There's currently no official way to get the dashboard to render
content generated by your test run, if that's what you mean, although
I've seen teams in the past that have modified the CCRB HTML templates
to do that. Do you just want the resulting content to be
pretty-printed as XML?

2. Likewise, you can modify the build_report.html.erb template to
include whichever pieces of the build you wish. Note that you have the
full Build object available to you at email render time. At the moment
EmailNotifier doesn't support more fine-grained template
specification, but you can subclass that plugin to do the right thing
if you need to support multiple templates.

3. Projects can be triggered by the successful completion of other
projects, as follows:

project.triggered_by :some_other_project

You can set up an automatic deploy workflow by adding a project whose
build command is the command you typically use to deploy your app and
which is triggered by the successful completion of the first build.
Does that help?

Cheers,

Brian

On Mon, Nov 2, 2009 at 10:48 AM, Joe Ersinghaus
<jersinghaus@...> wrote:

> Hello,
>
> I've got cruisecontrol.rb running and testing an air/fluint application
> successfully and just had a few questions I could not find the answers to in
> the docs although that doesn't mean they're not there? :)
>
> 1. Is there a way to publish the junit formatted xml test output for a
> fluint test run inside the projects dashboard?
>
> 2. Is there a way to publish the junit formatted xml test output for a
> fluint test run in an email upon build failure?
>
> 3. Is it possible to trigger some kind of script upon test passing that
> would allow me to then copy/deploy/stage a "cruised" rails project to a
> remote server?
>
>
> Thanks,
> Joe
>
> --
> Joe Ersinghaus
> Information Technology & Communications
> New Mexico Department of Agriculture/New Mexico State University
> MSC 3189, P.O. Box 30005
> Las Cruces, NM, USA 88003-8005
> Phone: (575) 646-7094
> Fax: (575) 646-1841
> Email: jersinghaus@...
>
>
> Confidentiality Notice:
> New Mexico has a very broad public records law. Most written communications
> to or from state employees are public records. Your e-mail communications
> may therefore be subject to public disclosure. This e-mail, including all
> attachments is for the sole use of the intended recipients. Any
> unauthorized review, use, disclosure or distribution is prohibited unless
> specifically provided under the New Mexico Inspection of Public Records Act.
> _______________________________________________
> Cruisecontrolrb-users mailing list
> Cruisecontrolrb-users@...
> http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users
>

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

a few noob questions

2009-11-02T10:48:07Z

Hello,

I've got cruisecontrol.rb running and testing an air/fluint application
successfully and just had a few questions I could not find the answers
to in the docs although that doesn't mean they're not there? :)

1. Is there a way to publish the junit formatted xml test output for a
fluint test run inside the projects dashboard?

2. Is there a way to publish the junit formatted xml test output for a
fluint test run in an email upon build failure?

3. Is it possible to trigger some kind of script upon test passing that
would allow me to then copy/deploy/stage a "cruised" rails project to a
remote server?

Thanks,
Joe

--
Joe Ersinghaus
Information Technology & Communications
New Mexico Department of Agriculture/New Mexico State University
MSC 3189, P.O. Box 30005
Las Cruces, NM, USA 88003-8005
Phone: (575) 646-7094
Fax: (575) 646-1841
Email: jersinghaus@...

Confidentiality Notice:
New Mexico has a very broad public records law. Most written communications to or from state employees are public records. Your e-mail communications may therefore be subject to public disclosure. This e-mail, including all attachments is for the sole use of the intended recipients. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-28T02:12:30Z

I have the same issue. My build fails because it tries to run the tests in vendor/plugins/paperclip and fails to require test/helper.rb.
When I run manually rake cruise in the work folder of cruisecontrol.rb, only my application tests are run.

marcelo.ribeiro wrote:

This may be hard to do because I think it somehow depends on the plugin....
I am not sure...

On Fri, Oct 23, 2009 at 10:01 PM, Chad Woolley <thewoolleyman@gmail.com>wrote:

> On Fri, Oct 23, 2009 at 11:51 AM, Brian Moseley <bcm@maz.org> wrote:
> > On Fri, Oct 23, 2009 at 11:33 AM, Chad Woolley <thewoolleyman@gmail.com>
> wrote:
> >
> >> ccrb runs the cruise task in your cruise.rake (or whatever task you
> >> have overridden). If you don't want plugins to run via cruise, change
> >> this task, and verify that they don't run when you invoke the task
> >> from the command line.
> >
> > if you take a look at my message to this list from Sep 24, you'll see
> > that the same thing is happening to me when run via cruise, even
> > though it doesn't happen when I run the same task at the command line.
>
> It may be a bug then. If you can get a minimally reproducible case
> with a dummy rails app, please open a bug on lighthouse with
> instructions to reproduce.
> _______________________________________________
> Cruisecontrolrb-users mailing list
> Cruisecontrolrb-users@rubyforge.org
> http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users
>

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@rubyforge.org
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-23T14:10:15Z

This may be hard to do because I think it somehow depends on the plugin....
I am not sure...

On Fri, Oct 23, 2009 at 10:01 PM, Chad Woolley <thewoolleyman@...> wrote:

On Fri, Oct 23, 2009 at 11:51 AM, Brian Moseley <bcm@...> wrote:
> On Fri, Oct 23, 2009 at 11:33 AM, Chad Woolley <thewoolleyman@...> wrote:
>
>> ccrb runs the cruise task in your cruise.rake (or whatever task you
>> have overridden). If you don't want plugins to run via cruise, change
>> this task, and verify that they don't run when you invoke the task
>> from the command line.
>
> if you take a look at my message to this list from Sep 24, you'll see
> that the same thing is happening to me when run via cruise, even
> though it doesn't happen when I run the same task at the command line.

It may be a bug then. If you can get a minimally reproducible case
with a dummy rails app, please open a bug on lighthouse with
instructions to reproduce.

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-23T14:01:47Z

On Fri, Oct 23, 2009 at 11:51 AM, Brian Moseley <bcm@...> wrote:

> On Fri, Oct 23, 2009 at 11:33 AM, Chad Woolley <thewoolleyman@...> wrote:
>
>> ccrb runs the cruise task in your cruise.rake (or whatever task you
>> have overridden). If you don't want plugins to run via cruise, change
>> this task, and verify that they don't run when you invoke the task
>> from the command line.
>
> if you take a look at my message to this list from Sep 24, you'll see
> that the same thing is happening to me when run via cruise, even
> though it doesn't happen when I run the same task at the command line.

It may be a bug then. If you can get a minimally reproducible case
with a dummy rails app, please open a bug on lighthouse with
instructions to reproduce.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-23T11:51:24Z

On Fri, Oct 23, 2009 at 11:33 AM, Chad Woolley <thewoolleyman@...> wrote:

> ccrb runs the cruise task in your cruise.rake (or whatever task you
> have overridden). If you don't want plugins to run via cruise, change
> this task, and verify that they don't run when you invoke the task
> from the command line.

if you take a look at my message to this list from Sep 24, you'll see
that the same thing is happening to me when run via cruise, even
though it doesn't happen when I run the same task at the command line.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-23T11:33:30Z

On Fri, Oct 23, 2009 at 10:09 AM, Marcelo Ribeiro
<ribeirodesenv@...> wrote:
> Yes
>
> It runs them all, and pretty well. No errors, failures, etc.

ccrb runs the cruise task in your cruise.rake (or whatever task you
have overridden). If you don't want plugins to run via cruise, change
this task, and verify that they don't run when you invoke the task
from the command line.
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Barack Obama’s Inaugural Address

2009-10-23T10:52:53Z

I stand here today humbled by the task before [url=http://www.bawwgt.com]dofus kamas[/url], grateful for the trust you have bestowed, mindful of the sacrifices borne by our [url=http://www.bawwgt.com]cheap dofus kamas[/url]. I thank President [url=http://www.bawwgt.com]dofus power leveling[/url] for his service to [url=http://www.bawwgt.com]buy dofus kamas[/url], as well as the generosity and cooperation he has shown throughout this transition.

Re: Cruise not ignoring plugins folder

2009-10-23T10:09:00Z

Yes

It runs them all, and pretty well. No errors, failures, etc.

- Marcelo

On Fri, Oct 23, 2009 at 5:12 PM, Chad Woolley <thewoolleyman@...> wrote:

On Fri, Oct 23, 2009 at 6:44 AM, Marcelo Ribeiro
<ribeirodesenv@...> wrote:
> Hi All
>
> I have been trying to find on the web a solution to my issue, but no
> success.
> I have installed cruisecontrolrb and set it up with a custom cruise.rake
> file in my project.
> Such file is invoking test:units and test:functionals, and also features
> rake task, for cucumber.
>
> All the tests pass, 0 failures, etc. But at the end of it, it tries to run
> plugin tests, requiring extra gems, libs, etc.
> Is it possible to somehow configure it so that it ignores the plugins tests?

Does it run the plugin tests if you run your cruise.rake task manually?
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Cruise not ignoring plugins folder

2009-10-23T09:12:33Z

On Fri, Oct 23, 2009 at 6:44 AM, Marcelo Ribeiro
<ribeirodesenv@...> wrote:

> Hi All
>
> I have been trying to find on the web a solution to my issue, but no
> success.
> I have installed cruisecontrolrb and set it up with a custom cruise.rake
> file in my project.
> Such file is invoking test:units and test:functionals, and also features
> rake task, for cucumber.
>
> All the tests pass, 0 failures, etc. But at the end of it, it tries to run
> plugin tests, requiring extra gems, libs, etc.
> Is it possible to somehow configure it so that it ignores the plugins tests?

Does it run the plugin tests if you run your cruise.rake task manually?
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Cruise not ignoring plugins folder

2009-10-23T06:44:48Z

Hi All

I have been trying to find on the web a solution to my issue, but no success.
I have installed cruisecontrolrb and set it up with a custom cruise.rake file in my project.
Such file is invoking test:units and test:functionals, and also features rake task, for cucumber.

All the tests pass, 0 failures, etc. But at the end of it, it tries to run plugin tests, requiring extra gems, libs, etc.
Is it possible to somehow configure it so that it ignores the plugins tests?

Thanks in advance,

- Marcelo

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: cruisecontrol with ant

2009-10-06T06:21:50Z

Alexey,

To solve the problem with ant + Windows XP Pro, I insert the code "exit %%ERRORLEVEL%%" in the line project.build_command.

project.build_command = 'ant -f ./build/buildC.xml && exit %%ERRORLEVEL%%'

Now, CC.rb get the correct error code.

Thanks for your message.
Rodrigo

On Wed, Sep 30, 2009 at 8:25 PM, Alexey Verkhovsky <alexey.verkhovsky@...> wrote:

On Wed, Sep 30, 2009 at 2:09 PM, Rodrigo Cascarrolho <rdgcasca@...> wrote:

Chad,
I'm running ccrb and ant in Windows XP Pro, and the return code ('echo %ERRORLEVEL%') is zero when ant script return success and non-zero when it return build failed, but always the cruisecontrolrb message is success.

That is... odd - I'm putting it mildly. Never heard of a bug like that before. If you can figure the cause, and it turns out to be CC.rb's fault, I promise to fix it.

I try to run cruisecontrolrb and ant in Ubuntu Linux 9.04. When I write in command line "~/sudo ruby cruise build myproject", the cruisecontrol get the correct error code (zero or non-zero), but when I run the command "~/sudo ruby cruise start", I recieve the message:
./lib/cruise_control/../
platform.rb:69:in `exec': Permission denied - lib/cruise_control/../../script/../config/../cruise build myproject (Errno::EACCES)
from ./lib/cruise_control/../platform.rb:69:in `safely_exec'
from ./lib/cruise_control/../platform.rb:47:in `create_child_process'

chmod +x ./cruise should fix that, I'd hope. Trying to run this stuff as root (with sudo) may not be such a good idea, by the way.

--
Alexey Verkhovsky
http://alex-verkhovsky.blogspot.com/
CruiseControl.rb [http://cruisecontrolrb.thoughtworks.com]

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: cruisecontrol with ant

2009-09-30T16:25:33Z

On Wed, Sep 30, 2009 at 2:09 PM, Rodrigo Cascarrolho <rdgcasca@...> wrote:

Chad,
I'm running ccrb and ant in Windows XP Pro, and the return code ('echo %ERRORLEVEL%') is zero when ant script return success and non-zero when it return build failed, but always the cruisecontrolrb message is success.

That is... odd - I'm putting it mildly. Never heard of a bug like that before. If you can figure the cause, and it turns out to be CC.rb's fault, I promise to fix it.

I try to run cruisecontrolrb and ant in Ubuntu Linux 9.04. When I write in command line "~/sudo ruby cruise build myproject", the cruisecontrol get the correct error code (zero or non-zero), but when I run the command "~/sudo ruby cruise start", I recieve the message:
./lib/cruise_control/../
platform.rb:69:in `exec': Permission denied - lib/cruise_control/../../script/../config/../cruise build myproject (Errno::EACCES)
from ./lib/cruise_control/../platform.rb:69:in `safely_exec'
from ./lib/cruise_control/../platform.rb:47:in `create_child_process'

chmod +x ./cruise should fix that, I'd hope. Trying to run this stuff as root (with sudo) may not be such a good idea, by the way.

--
Alexey Verkhovsky
http://alex-verkhovsky.blogspot.com/
CruiseControl.rb [http://cruisecontrolrb.thoughtworks.com]

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: cruisecontrol with ant

2009-09-30T13:09:09Z

Chad,
I'm running ccrb and ant in Windows XP Pro, and the return code ('echo %ERRORLEVEL%') is zero when ant script return success and non-zero when it return build failed, but always the cruisecontrolrb message is success.

I try to run cruisecontrolrb and ant in Ubuntu Linux 9.04. When I write in command line "~/sudo ruby cruise build myproject", the cruisecontrol get the correct error code (zero or non-zero), but when I run the command "~/sudo ruby cruise start", I recieve the message:
./lib/cruise_control/../

platform.rb:69:in `exec': Permission denied - lib/cruise_control/../../script/../config/../cruise build myproject (Errno::EACCES)
from ./lib/cruise_control/../platform.rb:69:in `safely_exec'
from ./lib/cruise_control/../platform.rb:47:in `create_child_process'

Any suggestion?

tks
Rodrigo

On Tue, Sep 22, 2009 at 6:27 PM, Chad Woolley <thewoolleyman@...> wrote:

On Tue, Sep 22, 2009 at 1:18 PM, Rodrigo Cascarrolho <rdgcasca@...> wrote:
> Hi,
> I new in this list of users and I want to use cruisecontrol.rb with ant. My
> problem is that the return message of ant is "BUILD FAILED", but the message
> of cruisecontrol is "Build 17251.5 finished SUCCESSFULLY". In my projetct, I
> write the cruise_config.rb "project.build_command = 'ant -buildfile
> ./build/Teste.xml'".

If you run your ant command from the command line, what is the value
of the return code 'echo $?' If it is zero, can you alter your build
command to print it out? Maybe it is behaving differently under the
ccrb environment.

You can also try it with a dummy ant script that just succeeds or
fails, and see if you get a different behavior.

-- Chad
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

custom cruise task running plugin tests

2009-09-24T23:39:27Z

I've created the following custom rake tasks to run rspec and cucumber:

===

desc "Task for CruiseControl.rb"
task :cruise => ['test:prepare', "spec", "cucumber"] do
puts "done"
end

namespace :test do
desc "Set up test environment"
task :prepare do
RAILS_ENV = 'test'
end
end

===

when I run this task at the command line, the command completes
successfully, like so:

===

$ rake cruise

... stuff happens ...

83 scenarios (83 passed)
512 steps (512 passed)
0m53.207s
done
Loaded suite /usr/local/bin/rake
Started

Finished in 0.000357 seconds.

0 tests, 0 assertions, 0 failures, 0 errors

===

when cc runs a build, however, it seems to be descending into my
project's vendor/plugins and running the test task:

===

[CruiseControl] Invoking Rake task "cruise"

.... stuff happens ...

83 scenarios (83 passed)
512 steps (512 passed)
0m53.414s
/usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in
`gem_original_require': no such file to load -- shoulda
(MissingSourceFile)
from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:156:in
`require'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:521:in
`new_constants_in'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:156:in
`require'
from ./vendor/plugins/acts_as_audited/test/test_helper.rb:12
from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require'
from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:156:in
`require'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:521:in
`new_constants_in'
from /var/lib/gems/1.8/gems/activesupport-2.3.3/lib/active_support/dependencies.rb:156:in
`require'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:90:in `collect_file'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:73:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `each'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:63:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `each'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:63:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `each'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:63:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `each'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:63:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `each'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:58:in `recursive_collect'
from /usr/lib/ruby/1.8/test/unit/collector/dir.rb:29:in `collect'
from /usr/lib/ruby/1.8/test/unit/autorunner.rb:68
from /usr/lib/ruby/1.8/test/unit/autorunner.rb:213:in `[]'
from /usr/lib/ruby/1.8/test/unit/autorunner.rb:213:in `run'
from /usr/lib/ruby/1.8/test/unit/autorunner.rb:12:in `run'
from /usr/lib/ruby/1.8/test/unit.rb:278
from -e:1
done
================================================================================
Using rails gem: rails-2.3.3

dir : /home/warhorn/.cruise/projects/warhorn2/work
command : echo /home/warhorn/.cruise/projects/warhorn2/work warhorn$
ruby1.8\ -e\ \"require\ \'rubygems\'\ rescue\ nil\;\ require\
\'rake\'\;\ load\
\'/usr/local/cruisecontrol-1.4.0/tasks/cc_build.rake\'\;\ ARGV\ \<\<\
\'--nosearch\'\ \<\<\ \'cc:build\'\;\ Rake.application.run\;\
ARGV.clear\" >>
/home/warhorn/.cruise/projects/warhorn2/build-47a964e.1/build.log &&
ruby1.8 -e "require 'rubygems' rescue nil; require 'rake'; load
'/usr/local/cruisecontrol-1.4.0/tasks/cc_build.rake'; ARGV <<
'--nosearch' << 'cc:build'; Rake.application.run; ARGV.clear" >>
/home/warhorn/.cruise/projects/warhorn2/build-47a964e.1/build.log 2>&1
exitstatus: 1

===

am I missing something about the cc environment that would cause it to
try to run the test task for the project's plugins? I looked at the cc
build tasks, but that didn't shed any light on the subject.

thanks!
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: how to run all tests AND metric_fu

2009-09-24T06:38:46Z

On Thu, Sep 17, 2009 at 02:50, Chad Woolley <thewoolleyman@...> wrote:
> project.build_command = 'rake metrics:all test'

As far as I remember metrics:all runs rcov to calculate test coverage,
so you don't have to run tests again. But to have a separate interval
for tests and metrics you have to configure two separate builders with
two separate work directories and schedulers.

Best regards,
Adam

--
Adam Byrtek
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: cruisecontrol with ant

2009-09-22T14:27:01Z

On Tue, Sep 22, 2009 at 1:18 PM, Rodrigo Cascarrolho <rdgcasca@...> wrote:
> Hi,
> I new in this list of users and I want to use cruisecontrol.rb with ant. My
> problem is that the return message of ant is "BUILD FAILED", but the message
> of cruisecontrol is "Build 17251.5 finished SUCCESSFULLY". In my projetct, I
> write the cruise_config.rb "project.build_command = 'ant -buildfile
> ./build/Teste.xml'".

If you run your ant command from the command line, what is the value
of the return code 'echo $?' If it is zero, can you alter your build
command to print it out? Maybe it is behaving differently under the
ccrb environment.

You can also try it with a dummy ant script that just succeeds or
fails, and see if you get a different behavior.

-- Chad
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: cruisecontrol with ant

2009-09-22T14:17:45Z

CC.rb is looking into the exit code of the build command. If it's non-zero, it's "build failed". If it's zero, it's "build sucessful". It doesn't parse the build output to make that decision.

On Tue, Sep 22, 2009 at 1:18 PM, Rodrigo Cascarrolho <rdgcasca@...> wrote:

Hi,
I new in this list of users and I want to use cruisecontrol.rb with ant. My problem is that the return message of ant is "BUILD FAILED", but the message of cruisecontrol is "Build 17251.5 finished SUCCESSFULLY". In my projetct, I write the cruise_config.rb "project.build_command = 'ant -buildfile ./build/Teste.xml'".

cruisecontrol.rb = version 1.4.0
ant = version 1.7.1

Somebody help-me?

Hugs,
Rodrigo

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

cruisecontrol with ant

2009-09-22T13:18:24Z

Hi,
I new in this list of users and I want to use cruisecontrol.rb with ant. My problem is that the return message of ant is "BUILD FAILED", but the message of cruisecontrol is "Build 17251.5 finished SUCCESSFULLY". In my projetct, I write the cruise_config.rb "project.build_command = 'ant -buildfile ./build/Teste.xml'".

cruisecontrol.rb = version 1.4.0
ant = version 1.7.1

Somebody help-me?

Hugs,
Rodrigo

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: how to run all tests AND metric_fu

2009-09-16T17:50:12Z

On Tue, Sep 15, 2009 at 9:42 AM, Philipp Bolliger <pbolliger@...> wrote:
> i want to use cruisecontrol.rb to run ‘rake test’ (every time a new revision
> is in the svn repo) and ‘rake metrics:all’ (let’s say every 24 hours). how
> do i have to configure cruisecontrol.rb? both rake tasks work. however, when
> i configure cruisecontrol.rb as described on the metric_fu website, i.e. add
> 'project.rake_task = ‘metrics:all’ project.scheduler.polling_interval =
> 24.hours’ to the projects cruise_config.rb, only the metrics:all task is
> executed, but not the tests. how do i configure cruisecontrol.rb so that
> both are run?

Can you use something like:

project.build_command = 'rake metrics:all test'

-- Chad
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: how to run all tests AND metric_fu

2009-09-15T23:21:56Z

Hi Phillipp,

The recommended way to do this is to have separate configuration
options based on the name you created the project with. See, for
example:

http://cruisecontrolrb.thoughtworks.com/documentation/manual#project_builder_configuration

Note that this requires you to have two projects configured, one as
your conventional CI project and another project purely for running
metrics. Add the second project using the cruise add command, like you
added the original.

Best of luck, and let us know if this works out for you.

Brian

On Tue, Sep 15, 2009 at 11:42 AM, Philipp Bolliger <pbolliger@...> wrote:

>
> i want to use cruisecontrol.rb to run ‘rake test’ (every time a new revision
> is in the svn repo) and ‘rake metrics:all’ (let’s say every 24 hours). how
> do i have to configure cruisecontrol.rb? both rake tasks work. however, when
> i configure cruisecontrol.rb as described on the metric_fu website, i.e. add
> 'project.rake_task = ‘metrics:all’ project.scheduler.polling_interval =
> 24.hours’ to the projects cruise_config.rb, only the metrics:all task is
> executed, but not the tests. how do i configure cruisecontrol.rb so that
> both are run?
> _______________________________________________
> Cruisecontrolrb-users mailing list
> Cruisecontrolrb-users@...
> http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users
>

_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

how to run all tests AND metric_fu

2009-09-15T09:42:30Z

i want to use cruisecontrol.rb to run ‘rake test’ (every time a new
revision is in the svn repo) and ‘rake metrics:all’ (let’s say every
24 hours). how do i have to configure cruisecontrol.rb? both rake
tasks work. however, when i configure cruisecontrol.rb as described on
the metric_fu website, i.e. add 'project.rake_task = ‘metrics:all’
project.scheduler.polling_interval = 24.hours’ to the projects
cruise_config.rb, only the metrics:all task is executed, but not the
tests. how do i configure cruisecontrol.rb so that both are run?
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Re: Problems with do_clean_checkout

2009-09-09T02:51:50Z

On Sat, Aug 15, 2009 at 19:46, Brian Guthrie<btguthrie@...> wrote:
> Adam - thanks so much for the patch. I've gone ahead and sent you a
> CCRB contributor's agreement--I'll go ahead and merge the patch
> locally, but I have to hold off on merging it into master until I've
> got your OK.

I've just responded to your email, hope it will be enough to integrate
the patch.

Best regards,
Adam

--
Adam Byrtek
_______________________________________________
Cruisecontrolrb-users mailing list
Cruisecontrolrb-users@...
http://rubyforge.org/mailman/listinfo/cruisecontrolrb-users

Nabble - CruiseControl.rb - Users

Let's connect on LinkedIn

LinkedIn

Few CC related questions

Re: How to do a clean check out.

Re: How to do a clean check out.

Re: How to do a clean check out.

Re: SSH keeps prompting for a password.

Re: SSH keeps prompting for a password.

Re: How to do a clean check out.

Re: SSH keeps prompting for a password.

How to do a clean check out.

SSH keeps prompting for a password.

Re: a few noob questions

Re: a few noob questions

a few noob questions

Re: Cruise not ignoring plugins folder

Re: Cruise not ignoring plugins folder

Re: Cruise not ignoring plugins folder

Re: Cruise not ignoring plugins folder

Re: Cruise not ignoring plugins folder

Barack Obama’s Inaugural Address

Re: Cruise not ignoring plugins folder

Re: Cruise not ignoring plugins folder

Cruise not ignoring plugins folder

Re: cruisecontrol with ant

Re: cruisecontrol with ant

Re: cruisecontrol with ant

custom cruise task running plugin tests

Re: how to run all tests AND metric_fu

Re: cruisecontrol with ant

Re: cruisecontrol with ant

cruisecontrol with ant

Re: how to run all tests AND metric_fu

Re: how to run all tests AND metric_fu

how to run all tests AND metric_fu

Re: Problems with do_clean_checkout