Dell PE1950 III - Perc 6i
|
View:
New views
11 Messages
—
Rating Filter:
Alert me
|
 |
Re: Dell PE1950 III - Perc 6i
by Marco Peereboom
::
Rate this Message:
I added the pci ids but it obviously didn't work. Can you send me the
dmesg? On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote: > Hi, > > Just got this machine from Dell. > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not > recognize the raid1 disk. > Any idea when Perc 6i will be added? > > --- > Thanks > JW |
|
|
Dell PE1950 III - Perc 6i
by J.W. Zondag
::
Rate this Message:
Hi,
Just got this machine from Dell. Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not recognize the raid1 disk. Any idea when Perc 6i will be added? --- Thanks JW |
|
|
Re: Dell PE1950 III - Perc 6i
by Marco Peereboom
::
Rate this Message:
dlg@ is working on a fix. If I get my hands on one I might beat him to
it :-) On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote: > Below dmesg: > > OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008 > pvalchev@...:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class) 2.83 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > real mem = 1068400640 (1018MB) > avail mem = 1027047424 (979MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @ > 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries) > bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007 > bios0: Dell Inc. PowerEdge 1950 > acpi0 at bios0: rev 2, can't enable ACPI > bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 > 0xcc000/0x5e00 0xec000/0x4000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 > ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 > pci1 at ppb0 bus 4 > ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci2 at ppb1 bus 5 > ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci3 at ppb2 bus 6 > ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > pci4 at ppb3 bus 7 > bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 > ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci5 at ppb4 bus 8 > ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 > pci6 at ppb5 bus 9 > ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 > pci7 at ppb6 bus 1 > mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell > PERC 6/i integrated: irq 5 > mfi0: firmware stuck in state 0 > mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12 > pci8 at ppb7 bus 10 > bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 > (0x4201): irq 5, address 00:10:18:31:68:d0 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 > pci9 at ppb8 bus 11 > ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 > pci10 at ppb9 bus 12 > ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 > pci11 at ppb10 bus 13 > pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 > pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 > pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 > pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 > pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 > pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 > pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 > ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 > pci12 at ppb11 bus 2 > ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > pci13 at ppb12 bus 3 > bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 > uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11 > uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10 > uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11 > uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10 > ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 > pci14 at ppb13 bus 14 > vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0 > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > usb1 at uhci0: USB revision 1.0 > -snip- > > 2008/1/25, Marco Peereboom <slash@...>: > > I added the pci ids but it obviously didn't work. Can you send me the > > dmesg? > > > > On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote: > > > Hi, > > > > > > Just got this machine from Dell. > > > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not > > > recognize the raid1 disk. > > > Any idea when Perc 6i will be added? > > > > > > --- > > > Thanks > > > JW |
|
|
Re: Dell PE1950 III - Perc 6i
by J.W. Zondag
::
Rate this Message:
Below dmesg:
OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008 pvalchev@...:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class) 2.83 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR real mem = 1068400640 (1018MB) avail mem = 1027047424 (979MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries) bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007 bios0: Dell Inc. PowerEdge 1950 acpi0 at bios0: rev 2, can't enable ACPI bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 0xcc000/0x5e00 0xec000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 pci1 at ppb0 bus 4 ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 pci2 at ppb1 bus 5 ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 pci3 at ppb2 bus 6 ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 pci4 at ppb3 bus 7 bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 pci5 at ppb4 bus 8 ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 pci6 at ppb5 bus 9 ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 pci7 at ppb6 bus 1 mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell PERC 6/i integrated: irq 5 mfi0: firmware stuck in state 0 mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12 pci8 at ppb7 bus 10 bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201): irq 5, address 00:10:18:31:68:d0 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 pci9 at ppb8 bus 11 ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 pci10 at ppb9 bus 12 ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 pci11 at ppb10 bus 13 pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 pci12 at ppb11 bus 2 ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 pci13 at ppb12 bus 3 bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10 uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11 uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10 ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 pci14 at ppb13 bus 14 vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) usb1 at uhci0: USB revision 1.0 -snip- 2008/1/25, Marco Peereboom <slash@...>: > I added the pci ids but it obviously didn't work. Can you send me the > dmesg? > > On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote: > > Hi, > > > > Just got this machine from Dell. > > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not > > recognize the raid1 disk. > > Any idea when Perc 6i will be added? > > > > --- > > Thanks > > JW |
|
|
Re: Dell PE1950 III - Perc 6i
by domenico.albanese@gmail.c
::
Rate this Message:
Sorry, I've the same problem. I don't understand if there is a way to have OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller ?
Thanks
|
|
|
Re: Dell PE1950 III - Perc 6i
by Marco Peereboom
::
Rate this Message:
It'll be part of the 4.3 release. It can be easily backported though.
On Thu, Feb 28, 2008 at 09:19:05AM -0800, domenico.albanese@... wrote: > Sorry, I've the same problem. I don't understand if there is a way to have > OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller > ? > > Thanks > > > > Marco Peereboom wrote: > > > > dlg@ is working on a fix. If I get my hands on one I might beat him to > > it :-) > > > > On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote: > >> Below dmesg: > >> > >> OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008 > >> pvalchev@...:/usr/src/sys/arch/i386/compile/RAMDISK_CD > >> cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class) > >> 2.83 GHz > >> cpu0: > >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > >> real mem = 1068400640 (1018MB) > >> avail mem = 1027047424 (979MB) > >> mainbus0 at root > >> bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @ > >> 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries) > >> bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007 > >> bios0: Dell Inc. PowerEdge 1950 > >> acpi0 at bios0: rev 2, can't enable ACPI > >> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 > >> 0xcc000/0x5e00 0xec000/0x4000! > >> cpu0 at mainbus0 > >> pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > >> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 > >> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 > >> pci1 at ppb0 bus 4 > >> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > >> pci2 at ppb1 bus 5 > >> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > >> pci3 at ppb2 bus 6 > >> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > >> pci4 at ppb3 bus 7 > >> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 > >> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 > >> pci5 at ppb4 bus 8 > >> ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 > >> pci6 at ppb5 bus 9 > >> ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 > >> pci7 at ppb6 bus 1 > >> mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell > >> PERC 6/i integrated: irq 5 > >> mfi0: firmware stuck in state 0 > >> mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev > >> 0x12 > >> pci8 at ppb7 bus 10 > >> bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 > >> (0x4201): irq 5, address 00:10:18:31:68:d0 > >> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > >> ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 > >> pci9 at ppb8 bus 11 > >> ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 > >> pci10 at ppb9 bus 12 > >> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 > >> pci11 at ppb10 bus 13 > >> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 > >> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 > >> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 > >> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 > >> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 > >> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 > >> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 > >> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 > >> pci12 at ppb11 bus 2 > >> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > >> pci13 at ppb12 bus 3 > >> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 > >> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11 > >> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10 > >> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11 > >> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10 > >> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11 > >> usb0 at ehci0: USB revision 2.0 > >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > >> ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 > >> pci14 at ppb13 bus 14 > >> vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02 > >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > >> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM > >> disabled > >> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, > >> channel 0 configured to compatibility, channel 1 configured to > >> compatibility > >> atapiscsi0 at pciide0 channel 0 drive 0 > >> scsibus0 at atapiscsi0: 2 targets > >> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0 > >> 5/cdrom removable > >> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > >> pciide0: channel 1 ignored (disabled) > >> usb1 at uhci0: USB revision 1.0 > >> -snip- > >> > >> 2008/1/25, Marco Peereboom <slash@...>: > >> > I added the pci ids but it obviously didn't work. Can you send me the > >> > dmesg? > >> > > >> > On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote: > >> > > Hi, > >> > > > >> > > Just got this machine from Dell. > >> > > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not > >> > > recognize the raid1 disk. > >> > > Any idea when Perc 6i will be added? > >> > > > >> > > --- > >> > > Thanks > >> > > JW > > > > > > > > -- > View this message in context: http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15741360.html > Sent from the openbsd user - misc mailing list archive at Nabble.com. |
|
|
Re: Dell PERC 6
by Navan Carson
::
Rate this Message:
I am interested in this driver as well. Has anyone heard how development
is progressing? Navan domenico.albanese@... wrote: > Sorry, I've the same problem. I don't understand if there is a way to have > OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller? > > Marco Peereboom wrote: >> dlg@ is working on a fix. If I get my hands on one I might beat him to it :-) >>> >>> 2008/1/25, Marco Peereboom <slash@...>: >>>> I added the pci ids but it obviously didn't work. Can you send me the >>>> dmesg? |
|
|
Re: Dell PERC 6
by Marco Peereboom
::
Rate this Message:
Done and ready for 4.3
On Thu, Feb 28, 2008 at 12:19:00PM -0700, Navan Carson wrote: > I am interested in this driver as well. Has anyone heard how development > is progressing? > > Navan > > domenico.albanese@... wrote: >> Sorry, I've the same problem. I don't understand if there is a way to have >> OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller? >> >> Marco Peereboom wrote: >>> dlg@ is working on a fix. If I get my hands on one I might beat him to it :-) >>>> >>>> 2008/1/25, Marco Peereboom <slash@...>: >>>>> I added the pci ids but it obviously didn't work. Can you send me the >>>>> dmesg? |
|
|
Re: Dell PE1950 III - Perc 6i
by domenico.albanese@gmail.c
::
Rate this Message:
Many, many thanks Marco, but please help me again.
I cannot find 4.3 release sys.tar.gz (I think I need it to find the new driver, or there is a patch ?) where can I download it. ? The last question ( I hope  ), which is the file that I need? mfi.c, mfi_pci.c, both or more ?
Thanks again.
|
|
|
Re: Dell PE1950 III - Perc 6i
by Marco Peereboom
::
Rate this Message:
There is no 4.3 release just yet. You'll have to check it out of cvs.
You need to grab sys/dev/pci/mfi_pci.c & sys/dev/ic/mfi* and rebuild your kernel. Or you can simply use a snapshot. On Feb 28, 2008, at 2:50 PM, "domenico.albanese@..." <domenico.albanese@... > wrote: > Many, many thanks Marco, but please help me again. > > I cannot find 4.3 release sys.tar.gz (I think I need it to find the > new > driver, or there is a patch ?) where can I download it. ? > > The last question ( I hope :blush: ), which is the file that I > need? mfi.c, > mfi_pci.c, both or more ? > > Thanks again. > > > > Marco Peereboom wrote: >> >> It'll be part of the 4.3 release. It can be easily backported >> though. >> >> On Thu, Feb 28, 2008 at 09:19:05AM -0800, domenico.albanese@... >> wrote: >>> Sorry, I've the same problem. I don't understand if there is a way >>> to >>> have >>> OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid >>> controller >>> ? >>> >>> Thanks >>> >>> >>> >>> Marco Peereboom wrote: >>>> >>>> dlg@ is working on a fix. If I get my hands on one I might beat >>>> him to >>>> it :-) >>>> >>>> On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote: >>>>> Below dmesg: >>>>> >>>>> OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST >>>>> 2008 >>>>> >>> pvalchev@...:/usr/src/sys/arch/i386/compile/RAMDISK_CD >>>>> cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686- >>>>> class) >>>>> 2.83 GHz >>>>> cpu0: >>>>> >>> FPU, >>> V86, >>> DE, >>> PSE, >>> TSC, >>> MSR, >>> PAE, >>> MCE, >>> CX8, >>> APIC, >>> SEP, >>> MTRR, >>> PGE, >>> MCA, >>> CMOV, >>> PAT, >>> PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- >>> CPL,VMX,EST,TM2,CX16,xTPR >>>>> real mem = 1068400640 (1018MB) >>>>> avail mem = 1027047424 (979MB) >>>>> mainbus0 at root >>>>> bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @ >>>>> 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries) >>>>> bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007 >>>>> bios0: Dell Inc. PowerEdge 1950 >>>>> acpi0 at bios0: rev 2, can't enable ACPI >>>>> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 >>>>> 0xcc000/0x5e00 0xec000/0x4000! >>>>> cpu0 at mainbus0 >>>>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios) >>>>> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 >>>>> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 >>>>> pci1 at ppb0 bus 4 >>>>> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 >>>>> pci2 at ppb1 bus 5 >>>>> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 >>>>> pci3 at ppb2 bus 6 >>>>> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 >>>>> pci4 at ppb3 bus 7 >>>>> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 >>>>> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 >>>>> pci5 at ppb4 bus 8 >>>>> ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 >>>>> pci6 at ppb5 bus 9 >>>>> ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 >>>>> pci7 at ppb6 bus 1 >>>>> mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, >>>>> Dell >>>>> PERC 6/i integrated: irq 5 >>>>> mfi0: firmware stuck in state 0 >>>>> mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 >>>>> PCIE" rev >>>>> 0x12 >>>>> pci8 at ppb7 bus 10 >>>>> bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, >>>>> BCM5750 C1 >>>>> (0x4201): irq 5, address 00:10:18:31:68:d0 >>>>> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 >>>>> ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 >>>>> pci9 at ppb8 bus 11 >>>>> ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 >>>>> pci10 at ppb9 bus 12 >>>>> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 >>>>> pci11 at ppb10 bus 13 >>>>> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev >>>>> 0x12 >>>>> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev >>>>> 0x12 >>>>> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev >>>>> 0x12 >>>>> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 >>>>> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 >>>>> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 >>>>> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 >>>>> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 >>>>> pci12 at ppb11 bus 2 >>>>> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 >>>>> pci13 at ppb12 bus 3 >>>>> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5 >>>>> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: >>>>> irq 11 >>>>> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: >>>>> irq 10 >>>>> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: >>>>> irq 11 >>>>> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: >>>>> irq 10 >>>>> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: >>>>> irq 11 >>>>> usb0 at ehci0: USB revision 2.0 >>>>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >>>>> ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 >>>>> pci14 at ppb13 bus 14 >>>>> vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02 >>>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >>>>> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: >>>>> PM >>>>> disabled >>>>> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: >>>>> DMA, >>>>> channel 0 configured to compatibility, channel 1 configured to >>>>> compatibility >>>>> atapiscsi0 at pciide0 channel 0 drive 0 >>>>> scsibus0 at atapiscsi0: 2 targets >>>>> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> >>>>> SCSI0 >>>>> 5/cdrom removable >>>>> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 >>>>> pciide0: channel 1 ignored (disabled) >>>>> usb1 at uhci0: USB revision 1.0 >>>>> -snip- >>>>> >>>>> 2008/1/25, Marco Peereboom <slash@...>: >>>>>> I added the pci ids but it obviously didn't work. Can you send >>>>>> me >>> the >>>>>> dmesg? >>>>>> >>>>>> On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote: >>>>>>> Hi, >>>>>>> >>>>>>> Just got this machine from Dell. >>>>>>> Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not >>>>>>> recognize the raid1 disk. >>>>>>> Any idea when Perc 6i will be added? >>>>>>> >>>>>>> --- >>>>>>> Thanks >>>>>>> JW >>>> >>>> >>>> >>> >>> -- >>> View this message in context: >>> http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15741360.html >>> Sent from the openbsd user - misc mailing list archive at >>> Nabble.com. >> >> >> > > -- > View this message in context: http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15745716.html > Sent from the openbsd user - misc mailing list archive at Nabble.com. |
|
|
Re: Dell PE1950 III - Perc 6i
by J.W. Zondag
::
Rate this Message:
2008/2/29, Marco Peereboom <slash@...>:
> There is no 4.3 release just yet. You'll have to check it out of cvs. > You need to grab sys/dev/pci/mfi_pci.c & sys/dev/ic/mfi* and rebuild > your kernel. > > Or you can simply use a snapshot. > > On Feb 28, 2008, at 2:50 PM, "domenico.albanese@..." <domenico.albanese@... > > wrote: > > > Many, many thanks Marco, but please help me again. > > > > I cannot find 4.3 release sys.tar.gz (I think I need it to find the > > new > > driver, or there is a patch ?) where can I download it. ? > > > > The last question ( I hope :blush: ), which is the file that I > > need? mfi.c, > > mfi_pci.c, both or more ? > > > > Thanks again. Sorry being so late. I've installed the OpenBSD snapshot from 10-02-2008 and it worked like a charm on a Dell PowerEdge 1950 III with Perc6i. Thanks! Jan Willem |
| Free embeddable forum powered by Nabble | Forum Help |
