Device support for T-Mobile Pulse (Huawei 8220)
|
View:
New views
8 Messages
—
Rating Filter:
Alert me
|
 |
Device support for T-Mobile Pulse (Huawei 8220)
by steev182
::
Rate this Message:
Would it be possible to get support for the new T-Mobile Pulse? I just bought it to replace my iPhone (it runs Android) and I was hoping it would just work like how my sister's Samsung Galaxy did when I tried it.
If you just need a USB ID, my output of lsusb contains this: Bus 001 Device 008: ID 12d1:1501 Huawei Technologies Co., Ltd. If anything else is needed, just let me know and I can find it for you. It'd be awesome if this can work though :D |
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by gabaug
::
Rate this Message:
On Fri, Nov 6, 2009 at 8:57 AM, steev182 <stevie.mulcahy@...> wrote:
> > Would it be possible to get support for the new T-Mobile Pulse? I just bought > it to replace my iPhone (it runs Android) and I was hoping it would just > work like how my sister's Samsung Galaxy did when I tried it. > > If you just need a USB ID, my output of lsusb contains this: > > Bus 001 Device 008: ID 12d1:1501 Huawei Technologies Co., Ltd. > > If anything else is needed, just let me know and I can find it for you. It'd > be awesome if this can work though :D We have a system for adding vendor/product ids to recognize as Android devices, which is ok. But it would be better if there was a generic way of recognizing Android devices, either by the USB information they expose via HAL (or devicekit-disks) or by their filesystem layout. Can you run "hal-device | grep -i android" and see if it returns anything? For my G1 dev phone, I have udi = '/org/freedesktop/Hal/devices/storage_serial_HTC_Android_Phone_HT851N003062_0_0' info.product = 'Android Phone' storage.model = 'Android Phone' and more. We could just look for Android in any of those fields. Gabriel _______________________________________________ banshee-list mailing list banshee-list@... http://mail.gnome.org/mailman/listinfo/banshee-list |
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by gabaug
::
Rate this Message:
On Fri, Nov 6, 2009 at 3:47 PM, Gabriel Burt <gabriel.burt@...> wrote:
> On Fri, Nov 6, 2009 at 8:57 AM, steev182 <stevie.mulcahy@...> wrote: >> >> Would it be possible to get support for the new T-Mobile Pulse? I just bought >> it to replace my iPhone (it runs Android) and I was hoping it would just >> work like how my sister's Samsung Galaxy did when I tried it. >> >> If you just need a USB ID, my output of lsusb contains this: >> >> Bus 001 Device 008: ID 12d1:1501 Huawei Technologies Co., Ltd. >> >> If anything else is needed, just let me know and I can find it for you. It'd >> be awesome if this can work though :D > > We have a system for adding vendor/product ids to recognize as Android > devices, which is ok. But it would be better if there was a generic > way of recognizing Android devices, either by the USB information they > expose via HAL (or devicekit-disks) or by their filesystem layout. > > Can you run "hal-device | grep -i android" and see if it returns > anything? For my G1 dev phone, I have > > udi = '/org/freedesktop/Hal/devices/storage_serial_HTC_Android_Phone_HT851N003062_0_0' > info.product = 'Android Phone' > storage.model = 'Android Phone' > > and more. We could just look for Android in any of those fields. Ok, I just committed a patch that looks for 'android' in the USB device's product, name, uuid, and serial, and recognize it as an Android device if found. Could you checkout Banshee from git master and see if that does it for you? Gabriel _______________________________________________ banshee-list mailing list banshee-list@... http://mail.gnome.org/mailman/listinfo/banshee-list |
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by steev182
::
Rate this Message:
Hi Gabriel,
When I run "hal-device | grep android" I get no output, I've put the output of hal-device to a file and looked through it for huawei, and found several entries for it, the two attached below seem to be those of more interest than the others. The only problem is this doesn't look like particularly good news for finding Android devices by searching for Android if the manufacturers aren't putting it in this USB information. Thanks, Steve 11: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial_if2' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.subsystem = 'usb' (string) info.product = 'USB Mass Storage Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial_if2' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 5 (0x5) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 4817 (0x12d1) (int) usb.product_id = 5377 (0x1501) (int) usb.vendor = 'Huawei Technologies Co., Ltd.' (string) usb.product = 'USB Mass Storage Interface' (string) usb.max_power = 500 (0x1f4) (int) usb.num_ports = 0 (0x0) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.is_self_powered = false (bool) usb.speed = 480 (double) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.version = 2 (double) usb.linux.device_number = 18 (0x12) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' (string) usb.interface.subclass = 6 (0x6) (int) usb.interface.number = 2 (0x2) (int) info.linux.driver = 'usb-storage' (string) usb.interface.protocol = 80 (0x50) (int) usb.interface.class = 8 (0x8) (int) 12: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' info.vendor = 'Huawei Technologies Co., Ltd.' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 5 (0x5) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.vendor_id = 4817 (0x12d1) (int) usb_device.product_id = 5377 (0x1501) (int) usb_device.vendor = 'Huawei Technologies Co., Ltd.' (string) usb_device.product = 'T-Mobile 3G Phone' (string) info.subsystem = 'usb_device' (string) info.product = 'T-Mobile 3G Phone' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) usb_device.max_power = 500 (0x1f4) (int) info.linux.driver = 'usb' (string) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.version = 2 (double) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.device_number = 18 (0x12) (int) usb_device.is_self_powered = false (bool) usb_device.speed = 480 (double) usb_device.bus_number = 1 (0x1) (int) linux.device_file = '/dev/bus/usb/001/018' (string) usb_device.can_wake_up = true (bool)
|
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by gabaug
::
Rate this Message:
Ok, I've also added the vendor/product ids for Pulse and Droid
devices; look for support for them in the next release. On Sat, Nov 7, 2009 at 4:38 AM, steev182 <stevie.mulcahy@...> wrote: > > Hi Gabriel, > > When I run "hal-device | grep android" I get no output, I've put the output > of hal-device to a file and looked through it for huawei, and found several > entries for it, the two attached below seem to be those of more interest > than the others. The only problem is this doesn't look like particularly > good news for finding Android devices by searching for Android if the > manufacturers aren't putting it in this USB information. > > Thanks, > > Steve > > 11: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial_if2' > linux.hotplug_type = 2 (0x2) (int) > linux.subsystem = 'usb' (string) > info.subsystem = 'usb' (string) > info.product = 'USB Mass Storage Interface' (string) > info.udi = > '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial_if2' (string) > usb.linux.sysfs_path = > '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' (string) > usb.configuration_value = 1 (0x1) (int) > usb.num_configurations = 1 (0x1) (int) > usb.num_interfaces = 5 (0x5) (int) > usb.device_class = 0 (0x0) (int) > usb.device_subclass = 0 (0x0) (int) > usb.device_protocol = 0 (0x0) (int) > usb.vendor_id = 4817 (0x12d1) (int) > usb.product_id = 5377 (0x1501) (int) > usb.vendor = 'Huawei Technologies Co., Ltd.' (string) > usb.product = 'USB Mass Storage Interface' (string) > usb.max_power = 500 (0x1f4) (int) > usb.num_ports = 0 (0x0) (int) > usb.device_revision_bcd = 256 (0x100) (int) > usb.is_self_powered = false (bool) > usb.speed = 480 (double) > usb.bus_number = 1 (0x1) (int) > usb.can_wake_up = true (bool) > usb.version = 2 (double) > usb.linux.device_number = 18 (0x12) (int) > linux.sysfs_path = > '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' (string) > info.parent = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' > (string) > usb.interface.subclass = 6 (0x6) (int) > usb.interface.number = 2 (0x2) (int) > info.linux.driver = 'usb-storage' (string) > usb.interface.protocol = 80 (0x50) (int) > usb.interface.class = 8 (0x8) (int) > > 12: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' > info.vendor = 'Huawei Technologies Co., Ltd.' (string) > info.udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1501_noserial' > (string) > linux.hotplug_type = 2 (0x2) (int) > linux.subsystem = 'usb' (string) > usb_device.linux.sysfs_path = > '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4' (string) > usb_device.configuration_value = 1 (0x1) (int) > usb_device.num_configurations = 1 (0x1) (int) > usb_device.num_interfaces = 5 (0x5) (int) > usb_device.device_class = 0 (0x0) (int) > usb_device.device_subclass = 0 (0x0) (int) > usb_device.device_protocol = 0 (0x0) (int) > usb_device.vendor_id = 4817 (0x12d1) (int) > usb_device.product_id = 5377 (0x1501) (int) > usb_device.vendor = 'Huawei Technologies Co., Ltd.' (string) > usb_device.product = 'T-Mobile 3G Phone' (string) > info.subsystem = 'usb_device' (string) > info.product = 'T-Mobile 3G Phone' (string) > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4' > (string) > info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' > (string) > usb_device.max_power = 500 (0x1f4) (int) > info.linux.driver = 'usb' (string) > usb_device.device_revision_bcd = 256 (0x100) (int) > usb_device.version = 2 (double) > usb_device.num_ports = 0 (0x0) (int) > usb_device.linux.device_number = 18 (0x12) (int) > usb_device.is_self_powered = false (bool) > usb_device.speed = 480 (double) > usb_device.bus_number = 1 (0x1) (int) > linux.device_file = '/dev/bus/usb/001/018' (string) > usb_device.can_wake_up = true (bool) > > > > gabaug wrote: >> >> On Fri, Nov 6, 2009 at 8:57 AM, steev182 <stevie.mulcahy@...> wrote: >>> >>> Would it be possible to get support for the new T-Mobile Pulse? I just >>> bought >>> it to replace my iPhone (it runs Android) and I was hoping it would just >>> work like how my sister's Samsung Galaxy did when I tried it. >>> >>> If you just need a USB ID, my output of lsusb contains this: >>> >>> Bus 001 Device 008: ID 12d1:1501 Huawei Technologies Co., Ltd. >>> >>> If anything else is needed, just let me know and I can find it for you. >>> It'd >>> be awesome if this can work though :D >> >> We have a system for adding vendor/product ids to recognize as Android >> devices, which is ok. But it would be better if there was a generic >> way of recognizing Android devices, either by the USB information they >> expose via HAL (or devicekit-disks) or by their filesystem layout. >> >> Can you run "hal-device | grep -i android" and see if it returns >> anything? For my G1 dev phone, I have >> >> udi = >> '/org/freedesktop/Hal/devices/storage_serial_HTC_Android_Phone_HT851N003062_0_0' >> info.product = 'Android Phone' >> storage.model = 'Android Phone' >> >> and more. We could just look for Android in any of those fields. >> >> Gabriel >> _______________________________________________ >> banshee-list mailing list >> banshee-list@... >> http://mail.gnome.org/mailman/listinfo/banshee-list >> >> > > -- > View this message in context: http://old.nabble.com/Device-support-for-T-Mobile-Pulse-%28Huawei-8220%29-tp26230829p26240925.html > Sent from the Banshee mailing list archive at Nabble.com. > > _______________________________________________ > banshee-list mailing list > banshee-list@... > http://mail.gnome.org/mailman/listinfo/banshee-list > banshee-list mailing list banshee-list@... http://mail.gnome.org/mailman/listinfo/banshee-list |
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by KeithCu
::
Rate this Message:
Have you guys considered allowing the user to add custom device information so that they don't have to wait for a new release for their stuff to work with Banshee?
-Keith
On Sat, Nov 7, 2009 at 12:04 PM, Gabriel Burt <gabriel.burt@...> wrote: Ok, I've also added the vendor/product ids for Pulse and Droid _______________________________________________ banshee-list mailing list banshee-list@... http://mail.gnome.org/mailman/listinfo/banshee-list |
|
|
|
|
|
Re: Device support for T-Mobile Pulse (Huawei 8220)
by avongil
::
Rate this Message:
Gabriel,
I would like to try this patch out but really don't understand how to use git. Running banshee 1.5.0.0 on Ubuntu 9.10 Have a Motorola Droid, and would like to see if it's recognizing all Android phones.
|
| Free embeddable forum powered by Nabble | Forum Help |
