EAP/TLS authentication timeout
|
View:
New views
5 Messages
—
Rating Filter:
Alert me
|
 |
EAP/TLS authentication timeout
by Wiedemann, Joerg
::
Rate this Message:
Hi,
I'm trying to establish a EAP/TLS authentication. The certificates are created by the freeradius scripts. rad_eap_test v0.22 is used for testing. Somehow the authentication request runs into to timeout, but I can't see what's wrong. Any suggestions ? # ~/rad_eap_test -S testing123 -u wiedemj@... -m IEEE8021X -e TLS -H localhost -P 1812 -j client.pem -k client.pem -p hello -c timeout; 6 Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=0 length=147 Attribute 1 (User-Name) length=20 Value: 'wiedemj@...' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '70-6F-6C-69-73-68' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=27 Value: 'rad_eap_test + eapol_test' Attribute 79 (EAP-Message) length=25 Value: 02 00 00 17 01 77 69 65 64 65 6d 6a 40 65 64 63 6c 6c 63 2e 6e 65 74 Attribute 80 (Message-Authenticator) length=18 Value: cb 31 3e 88 24 e8 1a 10 cc b4 d2 12 6e bf 8c 68 Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=0 length=80 Attribute 79 (EAP-Message) length=24 Value: 01 01 00 16 04 10 89 18 38 04 bb 3d d5 df 53 ef 55 cb 64 5b 52 9b Attribute 80 (Message-Authenticator) length=18 Value: d8 85 a6 2f e9 11 da 62 f9 a3 43 1b 04 21 70 90 Attribute 24 (State) length=18 Value: be 60 98 38 be 61 9c a1 ab 26 38 fa 49 90 77 88 Copied RADIUS State Attribute Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=1 length=148 Attribute 1 (User-Name) length=20 Value: 'wiedemj@...' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '70-6F-6C-69-73-68' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=27 Value: 'rad_eap_test + eapol_test' Attribute 79 (EAP-Message) length=8 Value: 02 01 00 06 03 0d Attribute 24 (State) length=18 Value: be 60 98 38 be 61 9c a1 ab 26 38 fa 49 90 77 88 Attribute 80 (Message-Authenticator) length=18 Value: e4 1a c5 34 14 71 94 0c 2b 7c 4b ad 9b 3f c6 ae Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=1 length=64 Attribute 79 (EAP-Message) length=8 Value: 01 02 00 06 0d 20 Attribute 80 (Message-Authenticator) length=18 Value: 55 fa ee 1b 05 ce 82 83 ed ea 1c 98 a6 0e 52 2d Attribute 24 (State) length=18 Value: be 60 98 38 bf 62 95 a1 ab 26 38 fa 49 90 77 88 ------------------------------------------------------------------------ ------ FreeRADIUS Version 2.1.3, for host i486-pc-linux-gnu, built on Feb 25 2009 at 14:17:43 Starting - reading configuration files ... group = freerad user = freerad including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no check_cert_cn = "%{User-Name}" cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } [/etc/freeradius/users]:63 WARNING! Check item "Cleartext-Password" found in reply item list for user "wiedemj@...". This attribute MUST go on the first line with the other check items Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating DOT realm DOT { format = "suffix" delimiter = "." ignore_default = no ignore_null = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 44912, id=0, length=147 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "rad_eap_test + eapol_test" EAP-Message = 0x020000170177696564656d6a406564636c6c632e6e6574 Message-Authenticator = 0x95336ebc6f464cec15da6ffd9b04bd3b +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091103 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091103 [auth_log] expand: %t -> Tue Nov 3 15:22:30 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 0 length 23 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 127.0.0.1 port 44912 EAP-Message = 0x0101001604104abafec88ced95d38fea53aa31dd5856 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa14c8326a14d873428b7c5da9617a833 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 44912, id=1, length=148 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "rad_eap_test + eapol_test" EAP-Message = 0x02010006030d State = 0xa14c8326a14d873428b7c5da9617a833 Message-Authenticator = 0xa2a501fa232db3c9eea5e82e3800f17e +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091103 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091103 [auth_log] expand: %t -> Tue Nov 3 15:22:30 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/tls [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 127.0.0.1 port 44912 EAP-Message = 0x010200060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa14c8326a04e8e3428b7c5da9617a833 Finished request 1. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +12 Cleaning up request 1 ID 1 with timestamp +12 Ready to process requests. Regards Joerg - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
AW: EAP/TLS authentication timeout
by Wiedemann, Joerg
::
Rate this Message:
Hi,
I got a little further in using eapol_test. Now the radius server reports the following. FreeRADIUS Version 2.1.3, for host i486-pc-linux-gnu, built on Feb 25 2009 at 14:17:43 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/sql/mysql/counter.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default group = freerad user = freerad including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client dehanxp-8453 { ipaddr = 10.149.123.111 require_message_authenticator = no secret = "123" } client dehanrf-22201 { ipaddr = 10.149.10.68 require_message_authenticator = no secret = "Blu0DojNa" } client dehansw { ipaddr = 10.149.10.0 netmask = 24 require_message_authenticator = no secret = "RyftOnji" } client Sinus { ipaddr = 10.149.12.222 require_message_authenticator = no secret = "tcom" } client dehanrf-222c { ipaddr = 10.149.10.50 require_message_authenticator = no secret = "12345" } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } realm www { authhost = 10.149.12.11:1812 accthost = 10.149.12.11:1813 secret = e123Dcq } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no check_cert_cn = "%{User-Name}" cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } [/etc/freeradius/users]:63 WARNING! Check item "Cleartext-Password" found in reply item list for user "wiedemj@...". This attribute MUST go on the first line with the other check items Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating DOT realm DOT { format = "suffix" delimiter = "." ignore_default = no ignore_null = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=0, length=144 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020000170177696564656d6a406564636c6c632e6e6574 Message-Authenticator = 0x775abc55737e6cea952a10e9328c70d1 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:43 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 0 length 23 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 127.0.0.1 port 55334 EAP-Message = 0x010100160410188a0c3e8d6cc7af9b6d4b283464185d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fbca39a1fbda7840b404aff3aa5dd7e Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=1, length=145 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02010006030d State = 0x1fbca39a1fbda7840b404aff3aa5dd7e Message-Authenticator = 0x2c634dd080f01ff2ff343d5c717b44ba +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:43 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/tls [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 127.0.0.1 port 55334 EAP-Message = 0x010200060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fbca39a1ebeae840b404aff3aa5dd7e Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=2, length=232 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0202005d0d0016030100520100004e03014af1600722884b16fc3fd22eae365509d7ca 5fb0a984de178e9f76273d6e0dbf00002600390038003500160013000a00330032002f00 05000400150012000900140011000800060003020100 State = 0x1fbca39a1ebeae840b404aff3aa5dd7e Message-Authenticator = 0xac646b18e37fa95bc0e70ac405cae14b +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:43 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 2 length 93 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] (other): before/accept initialization [tls] TLS_accept: before/accept initialization [tls] <<< TLS 1.0 Handshake [length 0052], ClientHello [tls] TLS_accept: SSLv3 read client hello A [tls] >>> TLS 1.0 Handshake [length 002a], ServerHello [tls] TLS_accept: SSLv3 write server hello A [tls] >>> TLS 1.0 Handshake [length 084f], Certificate [tls] TLS_accept: SSLv3 write certificate A [tls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [tls] TLS_accept: SSLv3 write key exchange A [tls] >>> TLS 1.0 Handshake [length 00a8], CertificateRequest [tls] TLS_accept: SSLv3 write certificate request A [tls] TLS_accept: SSLv3 flush data [tls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 2 to 127.0.0.1 port 55334 EAP-Message = 0x010304000dc000000b42160301002a0200002603014af1600755acad64e5ba5c769cc3 97d2189311949c648d89b7d6f06ce909ca6f00003901160301084f0b00084b0008480003 97308203933082027ba003020102020101300d06092a864886f70d010104050030819331 0b3009060355040613024445310f300d0603550408130652616469757331123010060355 04071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e 3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126 30240603550403131d4578616d706c6520436572746966696361746520417574686f7269 7479 EAP-Message = 0x301e170d3039313130323133303532345a170d3130313130323133303532345a306d31 0b3009060355040613024445310f300d0603550408130652616469757331153013060355 040a130c4578616d706c6520496e632e311430120603550403130b646568616e6c78766d 31333120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d 30820122300d06092a864886f70d01010105000382010f003082010a0282010100ad0b8c 135549b41155a064de008cd6a26b825262d28b9e9de6f0b7a6cf756e620185b6b8adac6f 7fa66b72bc4b6a57864fcc04dc45146e6bb16a6a5c167fb329399675c771b103797a52fa 0dd6 EAP-Message = 0x3f7ba1741eb42d03979eeb2db107b7df6431bd414eef60ef66d9213eaadd8fd58ebcae 740955f9738f11cf0488ad8bd48c3c4bb46e3c638030acaff7b1140404f845dd83f328af cc7cfa8621511d0342cce54bb6c7ea47538a8ec3728dbb3d7a0c0bbea7fd93c9fa66e552 07e7929c8b742c398663df70557c20175559b4d485a4b0803af99bc655dbbdd03d264675 6098e8b4db91efe42639d33706f9f597b1f569402b0736fbdd8874a8b8c131b836ceda31 0203010001a317301530130603551d25040c300a06082b06010505070301300d06092a86 4886f70d0101040500038201010056546b866e102443cfc90c4ec53d2380ee91f2be42f6 f166 EAP-Message = 0x8b3ccc06994cf5cc5952e73e2997a7a9d4f78e5cfda44e19c9feb806e8c9bb921ece6c 061f60fda3015400be4ac3c1e6a87c3de3f69dbe3f2288dc1b2cd8bd257fc32ce74968ee cde89d314247507e040c0b8f2b7f1d31a31f28f1b95d17ac845668999c2c0ea1cc53af8b 576771fff9ff6ae4ec4e564db8fe358a37f6b6a6ddeb58f43136e3a573469e8304761a5c 6dcc2b828183ac7c51f191e39f7b6a2acc21621768a12c601fef8c8a1f489883d1a50a36 3258c0b4d0379885d0d16ed34f5a15664c39997b4fa4858aaa932123bac359c5f057b485 83a44a1137e4018b60c7e775701db6f2570004ab308204a73082038fa003020102020900 9b2c EAP-Message = 0xffa3b12f2ee2300d06092a86 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fbca39a1dbfae840b404aff3aa5dd7e Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=3, length=145 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300060d00 State = 0x1fbca39a1dbfae840b404aff3aa5dd7e Message-Authenticator = 0x88243ab728c8bbdbf13007e9c19174cb +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:43 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 3 to 127.0.0.1 port 55334 EAP-Message = 0x010404000dc000000b424886f70d0101050500308193310b3009060355040613024445 310f300d060355040813065261646975733112301006035504071309536f6d6577686572 6531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d 010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861 6d706c6520436572746966696361746520417574686f72697479301e170d303931313032 3133303232305a170d3130313130323133303232305a308193310b300906035504061302 4445310f300d060355040813065261646975733112301006035504071309536f6d657768 6572 EAP-Message = 0x6531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f7 0d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578 616d706c6520436572746966696361746520417574686f7269747930820122300d06092a 864886f70d01010105000382010f003082010a0282010100b1e1eecced65eab3ea1e21bb e11a4b5d42232595738f000c321c8d9fe1fc597a94e27f1a53a9cbdc9917ad487a27c19f 82f094fbebc09b4be46d6d3a9be30fcf242716aa7b4e9afea5ec69aabf30324b7b086b8d 6df6a82a9ac9294d4ee671c59a41ee85569db6839ea997a09dd3280f3ccb626bcc9d376c fc6c EAP-Message = 0x9f4e4bc0ffc447b390dacf3c3253ce6bf244d64efbe2931a658145e2689fd6e8542158 4c6ac83f9e9f115198e9c47bbbb598da914733f79cada81e6f15e1b02332de5c1086b521 a1911173200a96a28e9d56c82a6d3bb192100cfb2d69f3487dc6fdbebfe0dca2e5e6a7ba 745d320e0323cf49826288e271a3ad0bcc1161c8fd3fce2e491ac30203010001a381fb30 81f8301d0603551d0e0416041479c0ec0a9c1cf0e5bcce878b7ceb23f083c9ae2d3081c8 0603551d230481c03081bd801479c0ec0a9c1cf0e5bcce878b7ceb23f083c9ae2da18199 a48196308193310b3009060355040613024445310f300d06035504081306526164697573 3112 EAP-Message = 0x301006035504071309536f6d65776865726531153013060355040a130c4578616d706c 6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c65 2e636f6d312630240603550403131d4578616d706c652043657274696669636174652041 7574686f726974798209009b2cffa3b12f2ee2300c0603551d13040530030101ff300d06 092a864886f70d0101050500038201010036410c8cf929f2b3090a3fc9754779f6dd1a80 89cefbe87aa0d191eb2d5a19d30003e352e8ae5e6236f195f4ff0d76d1532f9df4f85737 0afab09cb3223f6585e82e86def203567a5d103aca4351c22a9b19967940fd7fd69dea4b 9287 EAP-Message = 0xe9e24454363017f77583cf3a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fbca39a1cb8ae840b404aff3aa5dd7e Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=4, length=145 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400060d00 State = 0x1fbca39a1cb8ae840b404aff3aa5dd7e Message-Authenticator = 0x8b23cc610d83783fea5090e8d46deac8 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:43 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 4 to 127.0.0.1 port 55334 EAP-Message = 0x010503600d8000000b426489c1ab64aa271476c700a3412e5d56c9b2688d613f31848a 2ddf9f8e12c21a4023e7b5cfeee26b5dd9af6ead54fe3285225f1eaef895e5b390f04ea1 c3b4873f5825d6f5b00d7c7917d939390292b4bed0ae262ef2ea85c6befe9bd27004a52d e68a776cb5f0b74eeecfce81ab578577060f2492a087ffe49d5a31a2afa13bca289c5817 d0e2ada5beba083eb8efa8623488c104ce28160301020d0c0002090080b0b57776b68eef 22cdd40b3545dd88663abfcc1575b9cc3f84fdeede9c8645e8c23a3d705fb78779f0306d 2dc37ac93933dadae2dead2f59003f7697045edf5606f42f89380c2704502f7dd5111f2f 456f EAP-Message = 0x2ce9339fe727813559d8c823c71219200e0b0cc6d88cbb4cc168bbe68e3eeda2105dec 8479ace13839026a0c57a49300010200805e3b2245705709adefccd8707ada9356ffdf37 db35f29c0bf682449dcc59cfbb681cf793ae9a515179b27faf465975ac2fb62e7344d418 6a7c19e67e755ea7185f9079bdfe6773462b2c9e3e6b5ef0a3aabf6d2b41038cb9d68e30 8d85f5cc761ba9a38ae6f5023b167dc8b51b4f852e6dd6fd41c1c64209e6ab387d8f953d a901008f17198c946db0f7a830babe23d8c1b443eadc67b704694b71f84619bbc46dd8b5 a59471bd79729684f21be4edb3f66e74fb78bc7913b2913ca80e2db2627e62bf75a3ad1a a924 EAP-Message = 0xf89e73d8ca82db85a4d6635606c485fa9dda0c74188fe9656efef443530ef2db8433c8 0bb3118c620fb4f011a75dcb086967405aef7d8ea22bb8db8e558461f6d918873baecebd bef9e72edcfb8537e0aab2306c437d3f1a4628228a6151d77574f351fede13b3b676d71c 5348b67e878f55c3baf76fe73d09812808d6ae7e9cff9a800d1a95c048fdd324b0b16f3b 7fd861d3c61a42f52ecb34940d9597022bc8c210e0ce344155f1c5a941f612c7913aba70 a5c3fa69d66a16030100a80d0000a005030401024000980096308193310b300906035504 0613024445310f300d060355040813065261646975733112301006035504071309536f6d 6577 EAP-Message = 0x6865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a86 4886f70d010901161161646d696e406578616d706c652e636f6d31263024060355040313 1d4578616d706c6520436572746966696361746520417574686f726974790e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fbca39a1bb9ae840b404aff3aa5dd7e Finished request 4. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 55334, id=5, length=1523 User-Name = "wiedemj@..." NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0205055e0d0016030103820b00037e00037b000378308203743082025ca00302010202 0102300d06092a864886f70d0101040500306d310b3009060355040613024445310f300d 0603550408130652616469757331153013060355040a130c4578616d706c6520496e632e 311430120603550403130b646568616e6c78766d31333120301e06092a864886f70d0109 01161161646d696e406578616d706c652e636f6d301e170d303931313032313330383033 5a170d3130313130323133303830335a3075310b3009060355040613024445310f300d06 03550408130652616469757331153013060355040a130c4578616d706c6520496e632e31 1b30 EAP-Message = 0x190603550403141277696564656d6a406564636c6c632e6e65743121301f06092a8648 86f70d010901161277696564656d6a406564636c6c632e6e657430820122300d06092a86 4886f70d01010105000382010f003082010a0282010100efa1dd7108bd0e4af0c47bbe79 40511a6a0e1b1c6937ae57308b1e55af1bc829024d13e546094d1c653cec9d6357aa5cac 469cbe9fc4a854221efc9c169fb2143bb92f1c3111782de488473ee712818355262b832f da3f3f2ab6809d7bef72ac030f93e59d9b5e89c977e9cde76311ffed567a955844f40840 d73fb67b6342c9028dd5861a1d3dc9ee663db69014d3038b80648c62f1eab336a959bbcb bf60 EAP-Message = 0x44708b215f59861238b57ba2bf0aed63eb4688160092f17b73546e9f7d77ca40d27832 956f81d15655cd32758e7c1af3a71f4bfcb5b28905585ab9b80689f878451ba2d6e890ec 8ccd919e6299bcc074fd09bfd0ba5fd4cb542160d2ba7c3002a30203010001a317301530 130603551d25040c300a06082b06010505070302300d06092a864886f70d010104050003 8201010077edb6f0bc87189299fd9157a30d7f29101008b241b540d9d08259f0c9f87199 3c2b072534c05cfce76d4f2df2df2c71d7061ef407aaaca7f6bc9d4e609c6fccf5a81e4d 18ae26a08303fc98eb6fd4a0bb3fbcdfae09cb1b3eae5da034ad1894ab757fb3547e8d6d 6a60 EAP-Message = 0xbfd44beb466b87b931d07e176e2e39106117c2beab257391835d80ada864c45840f069 a561ceee5ae603f6a20761e03b15ccef485aa46ffd185665c96141b6e7d66b89a0f63600 a5c7e64cfe17b2f5e84d93bcaacc6e9e955d6042a3d5370dd44351e997417f55973628a6 4ddc06e706b12a577802d209c21d7c8eb9121d03591d4b741332365b162538325b2c51ad 6697ef6993bd1716030100861000008200803bcb607c1515a79438ebba388bd45eaecd2c 80b195d2c00a06cb343521ccf5267290f99a2bd1ef8ed6ae20c31fbd8c6058d5d8287d2f 02e084ae2b93988ba5549abaecdf3ae2eab5948e3e24141d616fd7e96fa86031016be30d b582 EAP-Message = 0x9e555c38dfead36089744d1afa36b14f6508d6d1e2fcfd7af0d363ddf5517ee6ebbdad 1516030101060f00010201005fe72b1a9cf9fa2c609ddc4074e57f8ca94a05eb3e7ccca6 d28f0122a31097c71b0a003f676cbcfbb6a23aa49c93731eabfe6896d6927fdd519c511a fa1913cb08e03ef9ba435612d066ea9d1efd16b0fa9ee0560483b025a6d397bebc2681a9 87bed22764979e64520254f2bff93576a2b7cce0feb1d3043d5f09c08c375591152b802d b2c9d478d58f00a37121ebeea2660a8f58a066323007af52f9f0a097444b9e2188c300e5 d96e8edfbea8a8f335308928a8b0430b623b179b3b3544df16e0b594e36515e890a90cbf 3edf EAP-Message = 0xd270d8477e9c09ca99816d1866c1bc9c3be3fe5acd4dd6b7f3222bd7ce979b4edc7878 09de017ebc228ed5d6acff33434fcc14030100010116030100302d1de5f067aff761b157 255463114c29207ae08caa4f4be9717cf548dd609a798246eb6373cbc110ca236827974e f445 State = 0x1fbca39a1bb9ae840b404aff3aa5dd7e Message-Authenticator = 0x5ba244bc725517ccff1e3733f2331650 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20091104 [auth_log] expand: %t -> Wed Nov 4 12:05:44 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [DOT] Looking up realm "net" for User-Name = "wiedemj@..." [DOT] No such realm "net" ++[DOT] returns noop [suffix] Looking up realm "edcllc.net" for User-Name = "wiedemj@..." [suffix] No such realm "edcllc.net" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry wiedemj@... at line 63 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] <<< TLS 1.0 Handshake [length 0382], Certificate --> verify error:num=20:unable to get local issuer certificate [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert write:fatal:unknown CA TLS_accept:error in SSLv3 read client certificate B rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. TLS receive handshake failed during operation [tls] eaptls_process returned 4 [eap] Handler failed in EAP/tls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [wiedemj@.../<via Auth-Type = EAP>] (from client localhost port 0 cli 02-00-00-00-00-01) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> wiedemj@... attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 5 Sending Access-Reject of id 5 to 127.0.0.1 port 55334 EAP-Message = 0x04050004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.0 seconds. Cleaning up request 0 ID 0 with timestamp +43 Cleaning up request 1 ID 1 with timestamp +43 Cleaning up request 2 ID 2 with timestamp +43 Cleaning up request 3 ID 3 with timestamp +43 Cleaning up request 4 ID 4 with timestamp +43 Waking up in 1.8 seconds. Cleaning up request 5 ID 5 with timestamp +44 Ready to process requests. Regards Joerg - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Re: AW: EAP/TLS authentication timeout
by Alan DeKok-2
::
Rate this Message:
Wiedemann, Joerg wrote:
> I got a little further in using eapol_test. Now the radius server > reports the following. There is a lot... but reading it for "error" and "failure" doesn't hurt, either. ... > [tls] <<< TLS 1.0 Handshake [length 0382], Certificate > --> verify error:num=20:unable to get local issuer certificate > [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca > TLS Alert write:fatal:unknown CA > TLS_accept:error in SSLv3 read client certificate B > rlm_eap: SSL error error:140890B2:SSL > routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned > SSL: SSL_read failed in a system call (-1), TLS session fails. > TLS receive handshake failed during operation > [tls] eaptls_process returned 4 > [eap] Handler failed in EAP/tls > [eap] Failed in EAP select > ++[eap] returns invalid > Failed to authenticate the user. The certs you are using are wrong or non-existent. Follow the guide on http://deployingradius.com to get EAP working. There is also an EAP-TLS "howto" on freeradius.org, and on the wiki. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Re: AW: EAP/TLS authentication timeout
by Ivan Kalik
::
Rate this Message:
> I got a little further in using eapol_test. Now the radius server
> reports the following. ... > [tls] <<< TLS 1.0 Handshake [length 0382], Certificate > --> verify error:num=20:unable to get local issuer certificate > [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca > TLS Alert write:fatal:unknown CA And what is unclear about that message? Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
AW: AW: EAP/TLS authentication timeout
by Wiedemann, Joerg
::
Rate this Message:
Hi, > And what is unclear about that message? Right, the message is clear. It was more a problem of drawing the conclusion. I identified the issue in the Makefile I used to create the client certificate. It's working fine now. Thanks Joerg -----Ursprüngliche Nachricht----- Von: freeradius-users-bounces+joerg.wiedemann=edcllc.com@... [mailto:freeradius-users-bounces+joerg.wiedemann=edcllc.com@...] Im Auftrag von Ivan Kalik Gesendet: Mittwoch, 4. November 2009 14:39 An: FreeRadius users mailing list Betreff: Re: AW: EAP/TLS authentication timeout > I got a little further in using eapol_test. Now the radius server > reports the following. ... > [tls] <<< TLS 1.0 Handshake [length 0382], Certificate > --> verify error:num=20:unable to get local issuer certificate > [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca > TLS Alert write:fatal:unknown CA And what is unclear about that message? Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
| Free embeddable forum powered by Nabble | Forum Help |
