Error compiling Nut/OS: !E (0): Unknown architecture model LongJump, HasMul and Enhanced

[Wim - Simeg BVBA]

Hello,

A week ago I bought an ethernut 2.1 revB evaluation board. 
I’m experiencing problems compiling the Nut/OS as described in the
quick-start manual.
I’m using ICCAVR v7.14B together with ethernut v4.8.3.0.
In the Nut/OS configurator, I entered the necessary values as described in
the manual.

Compiling Nut/OS with AVR-ICC7 as selected platform ends with 3 errors:
 
!E (0): Unknown architecture model LongJump
!E (0): Unknown architecture model HasMul
!E (0): Unknown architecture model Enhanced
make[1]: *** [avr/os/context_icc.o] Error 1
make: *** [all] Error 2
11:37:40: ----- 'make all' failed with error 2 -----

Selecting AVR-ICC as the platform also doesn’t work:

11:56:47: ----- Running 'make clean' -----
11:56:47: Located c:\ethernut-4.8.3\nut\tools\win32\make.exe
11:56:51: ----- 'make clean' terminated successfully -----
11:56:51: ----- Running 'make all' -----
11:56:51: Located c:\ethernut-4.8.3\nut\tools\win32\make.exe
!E (0): Unknown architecture model avr_Enhanced
make[1]: *** [avr/os/context_icc.o] Error 1
make: *** [all] Error 2
11:56:51: ----- 'make all' failed with error 2 -----
 
Am I doing something wrong? What am I missing here?
Any advice which versions of ethernut and ICCAVR work together?

Thanks in advance!

Kind regards,

Wim


_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion

[Ethernut]

Wim - Simeg BVBA wrote:

> I’m using ICCAVR v7.14B together with ethernut v4.8.3.0.
> In the Nut/OS configurator, I entered the necessary values as described in
> the manual.

Unfortunately the software manual is somewhat outdated, specifically for
ICCv7.

Did you select avr-icc7 as the Platform on the Build settings page?

Also make sure, that ImageCraft for AVR is selected in the module tree.

Check the screencast at
http://www.ethernut.de/en/iccavr/

Hope this helps and sorry for the confusion. I'm currently working on a
new manual version, but it's a bit time consuming.

Harald

_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion