FW: Continuations Bug in 5.2.11

> I’ve noticed that emails sent to the forum from non-subscribed accounts are
> not distributed, so I’ll try again…
>
>
>
> ________________________________
>
> From: Bruce [mailto:dangle@...]
> Sent: Saturday, 15 August 2009 3:17 p.m.
> To: 'List for Therion users'
> Subject: Continuations Bug in 5.2.11
>
>
>
> I seem to have found a problem associated somehow with continuations in
> 5.2.11, and all the output variations I have tried so far work fine, except
> the following,
>
>
>
> export continuation-list \
>
>      -attributes on      \
>
>      -filter off         \
>
>      -output ./Output/BeautifulBulmerSystem_Continuations.html
>
>
>
> I have been using it with 5.2.10 for some time with no problems.
>
>
>
> I suspect the above export may have been fine with 5.2.11 until I removed a
> continuation from a survey and added two continuation points to replace it,
> one in a plan scrap, and one in an elevation scrap.  (I’m not sure about
> that – it may never have worked)
>
>
>
> Eg
>
> point 611.5 -495.25 continuation -text "Bruce M: 0.8m dia silt filled
> phreatic tube, medusa" -attr code "Needs Digging" -explored 40m
>
>
>
> Maybe I’m pushing the limits with an attr code with a text string?  It has
> worked fine up until now.
>
>
>
> The attached log files may perhaps help, but perhaps not as much as the
> above information.
>
> Cheers Bruce
>
>
>
>
>
> _______________________________________________
> Therion mailing list
> Therion@...
> http://mailman.speleo.sk/mailman/listinfo/therion
>
>

> not distributed, so I’ll try again…
>
>
>
> ________________________________
>
> From: Bruce [mailto:dangle@...]
> Sent: Saturday, 15 August 2009 3:17 p.m.
> To: 'List for Therion users'
> Subject: Continuations Bug in 5.2.11
>
>
>
> I seem to have found a problem associated somehow with continuations in
> 5.2.11, and all the output variations I have tried so far work fine,

> the following,
>
>
>
> export continuation-list \
>
>      -attributes on      \
>
>      -filter off         \
>
>      -output ./Output/BeautifulBulmerSystem_Continuations.html
>
>
>
> I have been using it with 5.2.10 for some time with no problems.
>
>
>
> I suspect the above export may have been fine with 5.2.11 until I removed

> one in a plan scrap, and one in an elevation scrap.  (I’m not sure about
> that – it may never have worked)
>
>
>
> Eg
>
> point 611.5 -495.25 continuation -text "Bruce M: 0.8m dia silt filled
> phreatic tube, medusa" -attr code "Needs Digging" -explored 40m
>
>
>
> Maybe I’m pushing the limits with an attr code with a text string?  It has
> worked fine up until now.
>
>
>
> The attached log files may perhaps help, but perhaps not as much as the
> above information.
>
> Cheers Bruce
>
>
>
>
>
> _______________________________________________
> Therion mailing list
> Therion@...
> http://mailman.speleo.sk/mailman/listinfo/therion
>
>