|
»
Getting rid of ring tone between SPA3102 and Asterisk
|
View:
New views
6 Messages
—
Rating Filter:
Alert me
|
 |
Getting rid of ring tone between SPA3102 and Asterisk
by Chibunna
::
Rate this Message:
Dont know how to explain this clearly but I ll try my best. I have my phone connected to an SPA3102 which in turn registers onto Asterisk as a client/user. When I dial out with my phone, the SPA 3102 dials asterisks and then asterisk dials the number out via the SPA3102(but under a different user/line ). The problem is in the first stage of the dial between the SPA3102 and asterisk...I get a ringing tone(just once).(Can't figure out where it is coming from? but I think asterisks sends this to the SPA3102 when the SPA3102 connects to it but I not sure). Has anyone experienced this and how do I get rid this of this tone ? and after this , after another slight pause ,I then get the real ringing tone(French ringing tone,live in France) from my local exchange. Thanks Chib |
|
|
Re: Getting rid of ring tone between SPA3102 and Asterisk
by Drew Gibson
::
Rate this Message:
Chibunna wrote: > Dont know how to explain this clearly but I ll try my best. > > I have my phone connected to an SPA3102 which in turn registers onto Asterisk as a client/user. > > When I dial out with my phone, the SPA 3102 dials asterisks and then asterisk dials the number out via the SPA3102(but under a different user/line ). > > The problem is in the first stage of the dial between the SPA3102 and asterisk...I get a ringing tone(just once).(Can't figure out where it is coming from? but I think asterisks sends this to the SPA3102 when the SPA3102 connects to it but I not sure). > > Has anyone experienced this and how do I get rid this of this tone ? > > and after this , after another slight pause ,I then get the real ringing tone(French ringing tone,live in France) from my local exchange. > > A quick guess would be to check that "VoIP Answer Delay" is set to zero on the SPA under Admin Login > Advanced > Voice > PSTN Line. If that's not the answer, then it would help us to help you if you post a) the relevant bits of your Asterisk dialplan and b) the "Dial Plans" and "VoIP-To-PSTN Gateway Setup" from the same page as above in the SPA3102 setup? regards, Drew |
|
|
Re: Getting rid of ring tone between SPA3102 and Asterisk
by Aaron Wolfe
::
Rate this Message:
On Thu, Mar 26, 2009 at 7:41 AM, Chibunna <chibunna@...> wrote:
> > > Dont know how to explain this clearly but I ll try my best. > > I have my phone connected to an SPA3102 which in turn registers onto > Asterisk as a client/user. > > When I dial out with my phone, the SPA 3102 dials asterisks and then > asterisk dials the number out via the SPA3102(but under a different > user/line ). > > The problem is in the first stage of the dial between the SPA3102 and > asterisk...I get a ringing tone(just once).(Can't figure out where it is > coming from? but I think asterisks sends this to the SPA3102 when the > SPA3102 connects to it but I not sure). > > Has anyone experienced this and how do I get rid this of this tone ? > > and after this , after another slight pause ,I then get the real ringing > tone(French ringing tone,live in France) from my local exchange. > I have a similar setup and I get this to, although I don't mind it. What seems to happen here is that the nslu2 is sometimes a bit slow answering the sip call from the spa3102. while the spa3102 is waiting for the call to be answered, it plays a ring sound. asterisk will also play rings while waiting for a transfer, for instance if the spa3102 fxo port takes a long time to answer. i think it is normal behavior when handing off calls between devices. there might be a setting on the sipura to be silent while waiting on the nslu2, that may be a solution for your issue. good luck. > Thanks > Chib > > |
|
|
Re: Getting rid of ring tone between SPA3102 and Asterisk
by Chibunna
::
Rate this Message:
Thanks guys I have got this sorted now
--- In nslu2-asterisk@..., Aaron Wolfe <aawolfe@...> wrote: > > On Thu, Mar 26, 2009 at 7:41 AM, Chibunna <chibunna@...> wrote: > > > > > > Dont know how to explain this clearly but I ll try my best. > > > > I have my phone connected to an SPA3102 which in turn registers onto > > Asterisk as a client/user. > > > > When I dial out with my phone, the SPA 3102 dials asterisks and then > > asterisk dials the number out via the SPA3102(but under a different > > user/line ). > > > > The problem is in the first stage of the dial between the SPA3102 and > > asterisk...I get a ringing tone(just once).(Can't figure out where it is > > coming from? but I think asterisks sends this to the SPA3102 when the > > SPA3102 connects to it but I not sure). > > > > Has anyone experienced this and how do I get rid this of this tone ? > > > > and after this , after another slight pause ,I then get the real ringing > > tone(French ringing tone,live in France) from my local exchange. > > > > I have a similar setup and I get this to, although I don't mind it. > What seems to happen here is that the nslu2 is sometimes a bit slow > answering the sip call from the spa3102. while the spa3102 is waiting > for the call to be answered, it plays a ring sound. asterisk will > also play rings while waiting for a transfer, for instance if the > spa3102 fxo port takes a long time to answer. i think it is normal > behavior when handing off calls between devices. > there might be a setting on the sipura to be silent while waiting on > the nslu2, that may be a solution for your issue. > good luck. > > > Thanks > > Chib > > > > > |
|
|
Re: Re: Getting rid of ring tone between SPA3102 and Asterisk
by Drew Gibson
::
Rate this Message:
For the record, what fixed it?
regards, Drew Chibunna wrote: > Thanks guys I have got this sorted now > > --- In nslu2-asterisk@..., Aaron Wolfe <aawolfe@...> wrote: > >> On Thu, Mar 26, 2009 at 7:41 AM, Chibunna <chibunna@...> wrote: >> >>> Dont know how to explain this clearly but I ll try my best. >>> >>> I have my phone connected to an SPA3102 which in turn registers onto >>> Asterisk as a client/user. >>> >>> When I dial out with my phone, the SPA 3102 dials asterisks and then >>> asterisk dials the number out via the SPA3102(but under a different >>> user/line ). >>> >>> The problem is in the first stage of the dial between the SPA3102 and >>> asterisk...I get a ringing tone(just once).(Can't figure out where it is >>> coming from? but I think asterisks sends this to the SPA3102 when the >>> SPA3102 connects to it but I not sure). >>> >>> Has anyone experienced this and how do I get rid this of this tone ? >>> >>> and after this , after another slight pause ,I then get the real ringing >>> tone(French ringing tone,live in France) from my local exchange. >>> >>> >> I have a similar setup and I get this to, although I don't mind it. >> What seems to happen here is that the nslu2 is sometimes a bit slow >> answering the sip call from the spa3102. while the spa3102 is waiting >> for the call to be answered, it plays a ring sound. asterisk will >> also play rings while waiting for a transfer, for instance if the >> spa3102 fxo port takes a long time to answer. i think it is normal >> behavior when handing off calls between devices. >> there might be a setting on the sipura to be silent while waiting on >> the nslu2, that may be a solution for your issue. >> good luck. >> >> >>> Thanks >>> Chib >>> >>> >>> > > > > > ------------------------------------ > > Yahoo! Groups Links > > > > > |
|
|
Re: Getting rid of ring tone between SPA3102 and Asterisk
by Chibunna
::
Rate this Message:
Setting VoIP Answer Delay" is set to zero on the SPA under Admin Login > Advanced > Voice > PSTN Line --- In nslu2-asterisk@..., Drew Gibson <aggibson@...> wrote: > > For the record, what fixed it? > > regards, > > Drew > > > Chibunna wrote: > > Thanks guys I have got this sorted now > > > > --- In nslu2-asterisk@..., Aaron Wolfe <aawolfe@> wrote: > > > >> On Thu, Mar 26, 2009 at 7:41 AM, Chibunna <chibunna@> wrote: > >> > >>> Dont know how to explain this clearly but I ll try my best. > >>> > >>> I have my phone connected to an SPA3102 which in turn registers onto > >>> Asterisk as a client/user. > >>> > >>> When I dial out with my phone, the SPA 3102 dials asterisks and then > >>> asterisk dials the number out via the SPA3102(but under a different > >>> user/line ). > >>> > >>> The problem is in the first stage of the dial between the SPA3102 and > >>> asterisk...I get a ringing tone(just once).(Can't figure out where it is > >>> coming from? but I think asterisks sends this to the SPA3102 when the > >>> SPA3102 connects to it but I not sure). > >>> > >>> Has anyone experienced this and how do I get rid this of this tone ? > >>> > >>> and after this , after another slight pause ,I then get the real ringing > >>> tone(French ringing tone,live in France) from my local exchange. > >>> > >>> > >> I have a similar setup and I get this to, although I don't mind it. > >> What seems to happen here is that the nslu2 is sometimes a bit slow > >> answering the sip call from the spa3102. while the spa3102 is waiting > >> for the call to be answered, it plays a ring sound. asterisk will > >> also play rings while waiting for a transfer, for instance if the > >> spa3102 fxo port takes a long time to answer. i think it is normal > >> behavior when handing off calls between devices. > >> there might be a setting on the sipura to be silent while waiting on > >> the nslu2, that may be a solution for your issue. > >> good luck. > >> > >> > >>> Thanks > >>> Chib > >>> > >>> > >>> > > > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > > |
| Free embeddable forum powered by Nabble | Forum Help |
