HP DL360 G6

[Alf Schlichting]

Hello,

since we need a new server and had good experiences with HP DL360 G5
machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
does anyone here use such beast successfully with OpenBSD?

Alf

[michal-49]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Alf Schlichting wrote:
> Hello,
>
> since we need a new server and had good experiences with HP DL360 G5
> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
> does anyone here use such beast successfully with OpenBSD?
>
> Alf
>

Think someone asked a few weeks ago. Search the archives. If I remember
correctly, yes but search as I might be wrong
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEVAwUBSvQrWraxcGUqWa/NAQLkBAgAn9cS/f8QGdzuZoT+McDMUueTWtMnr7DQ
XAl243m4YzWzwiC1mEqWbX5dRy/ialG3sgjbdif1ERXU/fkmY0GYNiid67GsJdzU
aaHcwT7BoPhuJiy/pylOscytVvnVglzluIUGBcJicEka3hcvhfQBUSLWRMfsUrfl
enNaS36T6JKWziWwkZtYDLWIO+TMMh5d1qfyFU0GMcM2DO+Pp5BIyD8J2zbJoFcA
W6Tdz9g8iwg0/UMi5x6DFAsb0jJr2XEhIkx571WjufTzOiqaiV/OVBg2zEB1N9C5
reXvc4AsW4lqa5L0/6VPV342EYvji501vDLnTra12k8W6Bi7iaYRlw==
=PS+A
-----END PGP SIGNATURE-----

[Johan Linner]

Michal skrev:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Alf Schlichting wrote:
>> Hello,
>>
>> since we need a new server and had good experiences with HP DL360 G5
>> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
>> does anyone here use such beast successfully with OpenBSD?
>>
>> Alf
>>
>
> Think someone asked a few weeks ago. Search the archives. If I remember
> correctly, yes but search as I might be wrong
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iQEVAwUBSvQrWraxcGUqWa/NAQLkBAgAn9cS/f8QGdzuZoT+McDMUueTWtMnr7DQ
> XAl243m4YzWzwiC1mEqWbX5dRy/ialG3sgjbdif1ERXU/fkmY0GYNiid67GsJdzU
> aaHcwT7BoPhuJiy/pylOscytVvnVglzluIUGBcJicEka3hcvhfQBUSLWRMfsUrfl
> enNaS36T6JKWziWwkZtYDLWIO+TMMh5d1qfyFU0GMcM2DO+Pp5BIyD8J2zbJoFcA
> W6Tdz9g8iwg0/UMi5x6DFAsb0jJr2XEhIkx571WjufTzOiqaiV/OVBg2zEB1N9C5
> reXvc4AsW4lqa5L0/6VPV342EYvji501vDLnTra12k8W6Bi7iaYRlw==
> =PS+A
> -----END PGP SIGNATURE-----
>

If you can stand the noise from the fans...

/Johan


__________ Information from ESET NOD32 Antivirus, version of virus signature database 4579 (20091106) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

[Rolf Sommerhalder]

> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
> does anyone here use such beast successfully with OpenBSD?

Last week, I got one as a surpise and I was told that the G5 can
apparently not be ordered anymore. I was in a hurry to bring up a Web
server. So I quickly inserted two new harddisks, configured the RAID
controller through the BIOS not to use them as a RAID array but two
separate logical volumes, and let OpenBSD i386 4.6-stable let
auto-partition (very nice!) the first drive. The test Web server was
online about half an hour later (mounting the rails and doing cable in
the rack while partitions got formatted and the system installed)...

So far, I have not had time to take a closer look at the machine. But
the basic stuff seems to work (did not try X or stuff like sound,
etc). The fans did not scream at all like a jet on takeoff, unlike
with some of earlier DLs. I try to post the output of a dmesg and
'sysctl hw' sometime this weekend.

Rolf

[Rolf Sommerhalder]

>> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
>> does anyone here use such beast successfully with OpenBSD?

As promised the output of dmesg and sysctl below.
Note that the memory sockets in this machine are empty, e.g. it comes
with 4 GB on board apparently by default.

# sysctl hw
hw.machine=i386
hw.model=Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class)
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0,sd1,cd0
hw.diskcount=3
hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
hw.sensors.cpu0.temp0=57.00 degC
hw.cpuspeed=2001
hw.vendor=Hewlett-Packard
hw.product=ProLiant DL360 G6
hw.serialno=CZJ929074N
hw.uuid=34373030-3635-435a-4a39-32393037344e
hw.physmem=3747438592
hw.usermem=3747229696
hw.ncpufound=4


# dmesg
OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
    deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 3747438592 (3573MB)
avail mem = 3638829056 (3470MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.6 @ 0xdf7fe000 (123 entries)
bios0: vendor Hewlett-Packard version "P64" date 06/02/2009
bios0: Hewlett-Packard ProLiant DL360 G6
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF
BERT HEST DMAR SSDT SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus -1 (IPT1)
acpiprt2 at acpi0: bus 3 (PT01)
acpiprt3 at acpi0: bus 10 (PT02)
acpiprt4 at acpi0: bus 7 (PT03)
acpiprt5 at acpi0: bus 11 (PT04)
acpiprt6 at acpi0: bus 12 (PT05)
acpiprt7 at acpi0: bus 13 (PT06)
acpiprt8 at acpi0: bus 14 (PT07)
acpiprt9 at acpi0: bus 2 (PT08)
acpiprt10 at acpi0: bus 4 (PT09)
acpiprt11 at acpi0: bus 15 (PT0A)
acpiprt12 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C3, C1
acpicpu1 at acpi0: C3, C3, C1
acpicpu2 at acpi0: C3, C3, C1
acpicpu3 at acpi0: C3, C3, C1
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x3600! 0xcfa00/0x1e00! 0xd1800/0x4000
ipmi at mainbus0 not configured
cpu0: EST: unknown system bus clock
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3406 rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 3
ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
apic 0 int 4 (irq 7)
ciss0: 2 LDs, HW rev 2, FW 1.62/1.62, 64bit fifo rro
scsibus0 at ciss0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct fixed
sd0: 139979MB, 512 bytes/sec, 286677120 sec total
sd1 at scsibus0 targ 1 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct fixed
sd1: 139979MB, 512 bytes/sec, 286677120 sec total
ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 10
ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 7
ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
pci4 at ppb3 bus 11
ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13
pci5 at ppb4 bus 12
ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13
pci6 at ppb5 bus 13
ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
pci7 at ppb6 bus 14
ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13
pci8 at ppb7 bus 2
bnx0 at pci8 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 7 (irq 7)
bnx1 at pci8 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int
15 (irq 11)
ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13
pci9 at ppb8 bus 4
ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13
pci10 at ppb9 bus 15
pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev 0x13
pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b rev 0x13
pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product 0x343c rev 0x13
pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev 0x13
pchb5 at pci0 dev 13 function 4 vendor "Intel", unknown product 0x3418 rev 0x13
pchb6 at pci0 dev 13 function 5 vendor "Intel", unknown product 0x3419 rev 0x13
pchb7 at pci0 dev 13 function 6 vendor "Intel", unknown product 0x341a rev 0x13
pchb8 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x341c rev 0x13
pchb9 at pci0 dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13
pchb10 at pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13
pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev 0x13
pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev 0x13
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8
int 20 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8
int 23 (irq 7)
uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8
int 22 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8
int 23 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8
int 20 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci11 at ppb10 bus 1
vga1 at pci11 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 23 (irq 7)
drm0 at radeondrm0
"Compaq iLO" rev 0x03 at pci11 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci11 dev 4 function 2 not configured
uhci4 at pci11 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8
int 22 (irq 10)
"Hewlett-Packard IPMI" rev 0x00 at pci11 dev 4 function 6 not configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 17 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28S-V, C.0F> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
uhub6 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
cpu2: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu3: unknown i686 model 0x1a, can't get bus clock (0x0)
bnx0: address 00:25:b3:ab:58:78
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:25:b3:ab:58:7a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
#

[Alf Schlichting]

Thanks!

Alf

On Friday 06 November 2009 18:17:23 you wrote:

> >> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
> >> does anyone here use such beast successfully with OpenBSD?
>
> As promised the output of dmesg and sysctl below.
> Note that the memory sockets in this machine are empty, e.g. it comes
> with 4 GB on board apparently by default.
>
> # sysctl hw
> hw.machine=i386
> hw.model=Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class)
> hw.ncpu=4
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=sd0,sd1,cd0
> hw.diskcount=3
> hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
> hw.sensors.cpu0.temp0=57.00 degC
> hw.cpuspeed=2001
> hw.vendor=Hewlett-Packard
> hw.product=ProLiant DL360 G6
> hw.serialno=CZJ929074N
> hw.uuid=34373030-3635-435a-4a39-32393037344e
> hw.physmem=3747438592
> hw.usermem=3747229696
> hw.ncpufound=4
>
>
> # dmesg
> OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
>     deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR real mem  = 3747438592 (3573MB)
> avail mem = 3638829056 (3470MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
> 0xf0000, SMBIOS rev. 2.6 @ 0xdf7fe000 (123 entries)
> bios0: vendor Hewlett-Packard version "P64" date 06/02/2009
> bios0: Hewlett-Packard ProLiant DL360 G6
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF
> BERT HEST DMAR SSDT SSDT SSDT
> acpi0: wakeup devices
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 4 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins
> acpiprt0 at acpi0: bus 1 (IP2P)
> acpiprt1 at acpi0: bus -1 (IPT1)
> acpiprt2 at acpi0: bus 3 (PT01)
> acpiprt3 at acpi0: bus 10 (PT02)
> acpiprt4 at acpi0: bus 7 (PT03)
> acpiprt5 at acpi0: bus 11 (PT04)
> acpiprt6 at acpi0: bus 12 (PT05)
> acpiprt7 at acpi0: bus 13 (PT06)
> acpiprt8 at acpi0: bus 14 (PT07)
> acpiprt9 at acpi0: bus 2 (PT08)
> acpiprt10 at acpi0: bus 4 (PT09)
> acpiprt11 at acpi0: bus 15 (PT0A)
> acpiprt12 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C3, C3, C1
> acpicpu1 at acpi0: C3, C3, C1
> acpicpu2 at acpi0: C3, C3, C1
> acpicpu3 at acpi0: C3, C3, C1
> acpitz0 at acpi0: critical temperature 31 degC
> bios0: ROM list: 0xc0000/0xb000 0xcc400/0x3600! 0xcfa00/0x1e00!
> 0xd1800/0x4000 ipmi at mainbus0 not configured
> cpu0: EST: unknown system bus clock
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3406 rev
> 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
> pci1 at ppb0 bus 3
> ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
> apic 0 int 4 (irq 7)
> ciss0: 2 LDs, HW rev 2, FW 1.62/1.62, 64bit fifo rro
> scsibus0 at ciss0: 2 targets
> sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct
> fixed sd0: 139979MB, 512 bytes/sec, 286677120 sec total
> sd1 at scsibus0 targ 1 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct
> fixed sd1: 139979MB, 512 bytes/sec, 286677120 sec total
> ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13
> pci2 at ppb1 bus 10
> ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
> pci3 at ppb2 bus 7
> ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
> pci4 at ppb3 bus 11
> ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13
> pci5 at ppb4 bus 12
> ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13
> pci6 at ppb5 bus 13
> ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
> pci7 at ppb6 bus 14
> ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13
> pci8 at ppb7 bus 2
> bnx0 at pci8 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 7
> (irq 7) bnx1 at pci8 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0
> int 15 (irq 11)
> ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13
> pci9 at ppb8 bus 4
> ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13
> pci10 at ppb9 bus 15
> pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev
> 0x13 pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b
> rev 0x13 pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product
> 0x343c rev 0x13 pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown
> product 0x343d rev 0x13 pchb5 at pci0 dev 13 function 4 vendor "Intel",
> unknown product 0x3418 rev 0x13 pchb6 at pci0 dev 13 function 5 vendor
> "Intel", unknown product 0x3419 rev 0x13 pchb7 at pci0 dev 13 function 6
> vendor "Intel", unknown product 0x341a rev 0x13 pchb8 at pci0 dev 14
> function 0 vendor "Intel", unknown product 0x341c rev 0x13 pchb9 at pci0
> dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 pchb10 at
> pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13
> pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev
> 0x13 pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product
> 0x3439 rev 0x13 "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not
> configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not
> configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not
> configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8
> int 20 (irq 5)
> uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8
> int 23 (irq 7)
> uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8
> int 22 (irq 10)
> uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8
> int 23 (irq 7)
> ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8
> int 20 (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> pci11 at ppb10 bus 1
> vga1 at pci11 dev 3 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: apic 8 int 23 (irq 7)
> drm0 at radeondrm0
> "Compaq iLO" rev 0x03 at pci11 dev 4 function 0 not configured
> "Compaq iLO" rev 0x03 at pci11 dev 4 function 2 not configured
> uhci4 at pci11 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8
> int 22 (irq 10)
> "Hewlett-Packard IPMI" rev 0x00 at pci11 dev 4 function 6 not configured
> usb1 at uhci4: USB revision 1.0
> uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
> pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 8 int 17 (irq 11) for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28S-V, C.0F> ATAPI 5/cdrom
> removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons
> wsmouse0 at ums0 mux 0
> uhub6 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> cpu2: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu3: unknown i686 model 0x1a, can't get bus clock (0x0)
> bnx0: address 00:25:b3:ab:58:78
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx1: address 00:25:b3:ab:58:7a
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> #