|

»

freebsd-proliant

HP Proliant dl g5

View: New views

8 Messages — Rating Filter: Alert me

	HP Proliant dl g5 by Hans Roman :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hi guys, I wanna know if someone has installed FreeBSD 7.1/7.0 in a HP Proliant dl g5. I've read that someone couldn't install 7.0 in this HP. Could you tell me if you had any troubles? and, which were them? Regards. -- Hans Roman _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Rainer Duffner :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Am 30.03.2009 um 22:33 schrieb Hans Roman: > Hi guys, I wanna know if someone has installed FreeBSD 7.1/7.0 in a HP > Proliant dl g5. I've read that someone couldn't install 7.0 in this > HP. > Could you tell me if you had any troubles? and, which were them? > We run various FreeBSD versions on mostly DL380G3,G4 and G5 (and some blades) I would have to look what the very latest hardware actually is. There was a time before 6.3 where you needed to run 6.3-PRERELEASE to get anything useful out of the hardware. Too bad HP doesn't really support FreeBSD with their insight-agents. Rainer _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Won :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message --- On Mon, 3/30/09, Hans Roman <hans.r.69@...> wrote: > Hi guys, I wanna know if someone has > installed FreeBSD 7.1/7.0 in a HP > Proliant dl g5. I've read that someone couldn't install 7.0 > in this HP. > Could you tell me if you had any troubles? and, which were > them? I have a DL 380 G5 box, so far no problem encountered with FreeBSD 7.1 during installation. :) Not relevant to the question above, but it should be great if the hpasmd and hpasmcli would work with freebsd 7.1 too. http://people.freebsd.org/~jcagle/#ilo _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Rob Crommentuijn :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message We have FreeBSD 7.1 running on a ML370G5 without any issues during the installations. The install of 6.2 on a DL380G5 and ML370G3 had some issues regarding the geometry of the disks, I had to enable Max Boot in the array controller in order to get the system booting after install. PS I would als like to have insight agents for freebsd and working HPasm, HPAUCLI kind regards, Rob _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Florian Smeets :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On 30.03.2009 22:33 Uhr, Hans Roman wrote: > Hi guys, I wanna know if someone has installed FreeBSD 7.1/7.0 in a HP > Proliant dl g5. I've read that someone couldn't install 7.0 in this HP. > Could you tell me if you had any troubles? and, which were them? > > Regards. > I recently installed 7.1-RELEASE successfully on the following models: DL320G5p DL360G5 DL380G5 Cheers, Florian _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Hans Roman :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hello, thanks for answering, I forgot to write the exact model which is DL 160 G5. I've been reading the archives of this list, and I found that the problem could be the LSI controller, and someone said that it could be installed by removing the LSI, I'm not sure of this, I didn't pay attention to that. Do you have any suggestions? Thanks and regards. -- Hans Roman _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Michael S Lysov :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Hello, as I know in 7.1-RELESE still not solved problem with HBA (dl160g5), so you need to replace it into left PCI-E slot to get installation work. 2009/4/1 Hans Roman <hans.r.69@...> > Hello, thanks for answering, I forgot to write the exact model which is DL > 160 G5. I've been reading the archives of this list, and I found that the > problem could be the LSI controller, and someone said that it could be > installed by removing the LSI, I'm not sure of this, I didn't pay attention > to that. Do you have any suggestions? > > > Thanks and regards. > -- > Hans Roman > _______________________________________________ > freebsd-proliant@... mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-proliant > To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@... > " > _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."
	Re: HP Proliant dl g5 by Hans Roman :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Thanks Michael, I'll try that as soon as I get some time. Regards. -- Hans Roman _______________________________________________ freebsd-proliant@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-proliant To unsubscribe, send any mail to "freebsd-proliant-unsubscribe@..."