How to split VCL testtool out?

[Zhu Lihua-3]

Hi all,

I've built the openoffice.org on a loongson machine, include testtool.
I wonder how to split testtool out from the installation set? I need a
stand alone testtool.

If I don't split it out, I'll have to use a very big (>300M) tool
include all the libs used by the office. It's a bit inconvenience.

Is there anyone could help? Thanks in advance.

Best regards,
--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Zhu Lihua-3]

For now, I've removed some useless directories. There is 230MB remained.
I think some libs should also be removed.
Thanks.
在 2009-10-27二的 16:01 +0800，Zhu Lihua写道：

> Hi all,
>
> I've built the openoffice.org on a loongson machine, include testtool.
> I wonder how to split testtool out from the installation set? I need a
> stand alone testtool.
>
> If I don't split it out, I'll have to use a very big (>300M) tool
> include all the libs used by the office. It's a bit inconvenience.
>
> Is there anyone could help? Thanks in advance.
>
> Best regards,

--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Caolán McNamara]

On Tue, 2009-10-27 at 16:01 +0800, Zhu Lihua wrote:
> Hi all,
>
> I've built the openoffice.org on a loongson machine, include testtool.
> I wonder how to split testtool out from the installation set? I need a
> stand alone testtool.

Don't you just need to package...

path/to/openoffice.org/basis3.X/program/hid.lst
path/to/openoffice.org/basis3.X/program/libcommunili.so
path/to/openoffice.org/basis3.X/program/libsimplecmli.so
path/to/openoffice.org/basis3.X/program/resource/stten-US.res
path/to/openoffice.org/basis3.X/program/testtool.bin
path/to/openoffice.org/basis3.X/program/testtoolrc

(replacing li with the mips equivalent suffix)

C.




---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Zhu Lihua-3]

Hi Caolán,

Thank you very much for the replay.

But it needs much more than those. It needs libs from URE also, and many
libs in the current directory.

BTW, your name sounds very much like a Chinese name, such as 曹兰. :-)

Best regards,
Lihua

在 2009-10-27二的 08:24 +0000，Caolán McNamara写道：

> On Tue, 2009-10-27 at 16:01 +0800, Zhu Lihua wrote:
> > Hi all,
> >
> > I've built the openoffice.org on a loongson machine, include testtool.
> > I wonder how to split testtool out from the installation set? I need a
> > stand alone testtool.
>
> Don't you just need to package...
>
> path/to/openoffice.org/basis3.X/program/hid.lst
> path/to/openoffice.org/basis3.X/program/libcommunili.so
> path/to/openoffice.org/basis3.X/program/libsimplecmli.so
> path/to/openoffice.org/basis3.X/program/resource/stten-US.res
> path/to/openoffice.org/basis3.X/program/testtool.bin
> path/to/openoffice.org/basis3.X/program/testtoolrc
>
> (replacing li with the mips equivalent suffix)
>
> C.
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>

--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Andre Schnabel]

Hi,

-------- Original-Nachricht --------
> Von: Zhu Lihua <zhulihua@...>
>
> I've built the openoffice.org on a loongson machine, include testtool.
> I wonder how to split testtool out from the installation set? I need a
> stand alone testtool.

There once was a set of scripts in CVS:
http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0

Unfortunately it seems, as standalone testtool is not supported anymore.
(What is somewhat strange, as it is the preferred way to use testtool
even for the QA-team).

Maybe someone at the qa project has an idea.

André
--
Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Gregor Hartmann-3]

Hi,

never thought of removing unneeded files but a good startingpoint would
be to remove everything that was built after module automation (which
contains the vcltesttool).

so one would need to get a list of the modules needed and get all files
delevered from the remaining modules. Then remove these files in the
installed office.

One exception is the hid.lst but there might be others like some of the
*.rdb files.

I will try to post a script which gets the filenames later.

Gregor

Andre Schnabel schrieb:

> Hi,
>
> -------- Original-Nachricht --------
>> Von: Zhu Lihua <zhulihua@...>
>>
>> I've built the openoffice.org on a loongson machine, include testtool.
>> I wonder how to split testtool out from the installation set? I need a
>> stand alone testtool.
>
> There once was a set of scripts in CVS:
> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
>
> Unfortunately it seems, as standalone testtool is not supported anymore.
> (What is somewhat strange, as it is the preferred way to use testtool
> even for the QA-team).
>
> Maybe someone at the qa project has an idea.
>
> André

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Zhu Lihua-3]

Hi Gregor,

It's great that you are back. I'll wait for your script then. Thank you
very much for the effort!

Best regards,
Lihua

在 2009-10-27二的 10:14 +0100，Gregor Hartmann写道：

> Hi,
>
> never thought of removing unneeded files but a good startingpoint would
> be to remove everything that was built after module automation (which
> contains the vcltesttool).
>
> so one would need to get a list of the modules needed and get all files
> delevered from the remaining modules. Then remove these files in the
> installed office.
>
> One exception is the hid.lst but there might be others like some of the
> *.rdb files.
>
> I will try to post a script which gets the filenames later.
>
> Gregor
>
> Andre Schnabel schrieb:
> > Hi,
> >
> > -------- Original-Nachricht --------
> >> Von: Zhu Lihua <zhulihua@...>
> >>
> >> I've built the openoffice.org on a loongson machine, include testtool.
> >> I wonder how to split testtool out from the installation set? I need a
> >> stand alone testtool.
> >
> > There once was a set of scripts in CVS:
> > http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
> >
> > Unfortunately it seems, as standalone testtool is not supported anymore.
> > (What is somewhat strange, as it is the preferred way to use testtool
> > even for the QA-team).
> >
> > Maybe someone at the qa project has an idea.
> >
> > André
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>

--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Gregor Hartmann-3]

Hi,

here is a script that outputs a list of filenames.

----------------------------------------- start

cd $SRC_ROOT

cd automation
build --all --show | grep "Building module" | sed "s/Building module //"
 > ../ttmodules
cd $SRC_ROOT

cd instsetoo_native
build --all --show | grep "Building module" | sed "s/Building module //"
 > ../allmodules
cd $SRC_ROOT

grep -v -f ttmodules -x < allmodules > modules

xargs -I {} cat $SOLARVER/$INPATH/inc/\{\}/deliver.log < modules | cut
-d" " -f3 | sed "s,.*/,," | sort -u

-------------------------------------- end

I won't attach it as I don't know if it will be stripped or not. Please
be careful reassembling the lines.

You need a sourcetree which is completely compiled a shell with set
environment and then source the script. (should work with bash and tcsh
and the like)

After removing the listed files from the installed office the testtool
might still run. I did not try it, so no guarantee at all.


Please let us know if it works.


hth
Gregor





Zhu Lihua schrieb:

> Hi Gregor,
>
> It's great that you are back. I'll wait for your script then. Thank you
> very much for the effort!
>
> Best regards,
> Lihua
>
> 在 2009-10-27二的 10:14 +0100，Gregor Hartmann写道：
>> Hi,
>>
>> never thought of removing unneeded files but a good startingpoint would
>> be to remove everything that was built after module automation (which
>> contains the vcltesttool).
>>
>> so one would need to get a list of the modules needed and get all files
>> delevered from the remaining modules. Then remove these files in the
>> installed office.
>>
>> One exception is the hid.lst but there might be others like some of the
>> *.rdb files.
>>
>> I will try to post a script which gets the filenames later.
>>
>> Gregor
>>
>> Andre Schnabel schrieb:
>>> Hi,
>>>
>>> -------- Original-Nachricht --------
>>>> Von: Zhu Lihua <zhulihua@...>
>>>>
>>>> I've built the openoffice.org on a loongson machine, include testtool.
>>>> I wonder how to split testtool out from the installation set? I need a
>>>> stand alone testtool.
>>> There once was a set of scripts in CVS:
>>> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
>>>
>>> Unfortunately it seems, as standalone testtool is not supported anymore.
>>> (What is somewhat strange, as it is the preferred way to use testtool
>>> even for the QA-team).
>>>
>>> Maybe someone at the qa project has an idea.
>>>
>>> André
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@...
>> For additional commands, e-mail: dev-help@...
>>

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Zhu Lihua-3]

Hi Gregor,

Thank you very much for the script.

I tried, sorry, but it doesn't work.

First, some how, build command dosen't work in a script. So I run this
script manually. And when I got the list, and deleted all the .so files
it contained in the "basis3.1/program" directory. Testtool.bin shows me
"segment error". Finally I even tried to use ldd command to find out all
the depend libs, and copy them back to "basis3.1/program" directory.
testtool.bin still doesn't work.


Do you have any other ideas? Or like tbo said in
http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0#dirlist
:
DEL: standalone TestTool is dead and won't be alive again due to CWS
sb87/83.


Thank you and best regards,
Lihua


在 2009-10-27二的 13:04 +0100，Gregor Hartmann写道：

> Hi,
>
> here is a script that outputs a list of filenames.
>
> ----------------------------------------- start
>
> cd $SRC_ROOT
>
> cd automation
> build --all --show | grep "Building module" | sed "s/Building module //"
>  > ../ttmodules
> cd $SRC_ROOT
>
> cd instsetoo_native
> build --all --show | grep "Building module" | sed "s/Building module //"
>  > ../allmodules
> cd $SRC_ROOT
>
> grep -v -f ttmodules -x < allmodules > modules
>
> xargs -I {} cat $SOLARVER/$INPATH/inc/\{\}/deliver.log < modules | cut
> -d" " -f3 | sed "s,.*/,," | sort -u
>
> -------------------------------------- end
>
> I won't attach it as I don't know if it will be stripped or not. Please
> be careful reassembling the lines.
>
> You need a sourcetree which is completely compiled a shell with set
> environment and then source the script. (should work with bash and tcsh
> and the like)
>
> After removing the listed files from the installed office the testtool
> might still run. I did not try it, so no guarantee at all.
>
>
> Please let us know if it works.
>
>
> hth
> Gregor
>
>
>
>
>
> Zhu Lihua schrieb:
> > Hi Gregor,
> >
> > It's great that you are back. I'll wait for your script then. Thank you
> > very much for the effort!
> >
> > Best regards,
> > Lihua
> >
> > 在 2009-10-27二的 10:14 +0100，Gregor Hartmann写道：
> >> Hi,
> >>
> >> never thought of removing unneeded files but a good startingpoint would
> >> be to remove everything that was built after module automation (which
> >> contains the vcltesttool).
> >>
> >> so one would need to get a list of the modules needed and get all files
> >> delevered from the remaining modules. Then remove these files in the
> >> installed office.
> >>
> >> One exception is the hid.lst but there might be others like some of the
> >> *.rdb files.
> >>
> >> I will try to post a script which gets the filenames later.
> >>
> >> Gregor
> >>
> >> Andre Schnabel schrieb:
> >>> Hi,
> >>>
> >>> -------- Original-Nachricht --------
> >>>> Von: Zhu Lihua <zhulihua@...>
> >>>>
> >>>> I've built the openoffice.org on a loongson machine, include testtool.
> >>>> I wonder how to split testtool out from the installation set? I need a
> >>>> stand alone testtool.
> >>> There once was a set of scripts in CVS:
> >>> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
> >>>
> >>> Unfortunately it seems, as standalone testtool is not supported anymore.
> >>> (What is somewhat strange, as it is the preferred way to use testtool
> >>> even for the QA-team).
> >>>
> >>> Maybe someone at the qa project has an idea.
> >>>
> >>> André
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: dev-unsubscribe@...
> >> For additional commands, e-mail: dev-help@...
> >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>

--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Zhu Lihua-3]

Maybe we can build the source code before that CWS was integrated, that
is DEV300m3, and then, use the perl script tbo provided.

在 2009-10-28三的 16:09 +0800，Zhu Lihua写道：

> Hi Gregor,
>
> Thank you very much for the script.
>
> I tried, sorry, but it doesn't work.
>
> First, some how, build command dosen't work in a script. So I run this
> script manually. And when I got the list, and deleted all the .so files
> it contained in the "basis3.1/program" directory. Testtool.bin shows me
> "segment error". Finally I even tried to use ldd command to find out all
> the depend libs, and copy them back to "basis3.1/program" directory.
> testtool.bin still doesn't work.
>
>
> Do you have any other ideas? Or like tbo said in
> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0#dirlist
> :
> DEL: standalone TestTool is dead and won't be alive again due to CWS
> sb87/83.
>
>
> Thank you and best regards,
> Lihua
>
>
> 在 2009-10-27二的 13:04 +0100，Gregor Hartmann写道：
> > Hi,
> >
> > here is a script that outputs a list of filenames.
> >
> > ----------------------------------------- start
> >
> > cd $SRC_ROOT
> >
> > cd automation
> > build --all --show | grep "Building module" | sed "s/Building module //"
> >  > ../ttmodules
> > cd $SRC_ROOT
> >
> > cd instsetoo_native
> > build --all --show | grep "Building module" | sed "s/Building module //"
> >  > ../allmodules
> > cd $SRC_ROOT
> >
> > grep -v -f ttmodules -x < allmodules > modules
> >
> > xargs -I {} cat $SOLARVER/$INPATH/inc/\{\}/deliver.log < modules | cut
> > -d" " -f3 | sed "s,.*/,," | sort -u
> >
> > -------------------------------------- end
> >
> > I won't attach it as I don't know if it will be stripped or not. Please
> > be careful reassembling the lines.
> >
> > You need a sourcetree which is completely compiled a shell with set
> > environment and then source the script. (should work with bash and tcsh
> > and the like)
> >
> > After removing the listed files from the installed office the testtool
> > might still run. I did not try it, so no guarantee at all.
> >
> >
> > Please let us know if it works.
> >
> >
> > hth
> > Gregor
> >
> >
> >
> >
> >
> > Zhu Lihua schrieb:
> > > Hi Gregor,
> > >
> > > It's great that you are back. I'll wait for your script then. Thank you
> > > very much for the effort!
> > >
> > > Best regards,
> > > Lihua
> > >
> > > 在 2009-10-27二的 10:14 +0100，Gregor Hartmann写道：
> > >> Hi,
> > >>
> > >> never thought of removing unneeded files but a good startingpoint would
> > >> be to remove everything that was built after module automation (which
> > >> contains the vcltesttool).
> > >>
> > >> so one would need to get a list of the modules needed and get all files
> > >> delevered from the remaining modules. Then remove these files in the
> > >> installed office.
> > >>
> > >> One exception is the hid.lst but there might be others like some of the
> > >> *.rdb files.
> > >>
> > >> I will try to post a script which gets the filenames later.
> > >>
> > >> Gregor
> > >>
> > >> Andre Schnabel schrieb:
> > >>> Hi,
> > >>>
> > >>> -------- Original-Nachricht --------
> > >>>> Von: Zhu Lihua <zhulihua@...>
> > >>>>
> > >>>> I've built the openoffice.org on a loongson machine, include testtool.
> > >>>> I wonder how to split testtool out from the installation set? I need a
> > >>>> stand alone testtool.
> > >>> There once was a set of scripts in CVS:
> > >>> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
> > >>>
> > >>> Unfortunately it seems, as standalone testtool is not supported anymore.
> > >>> (What is somewhat strange, as it is the preferred way to use testtool
> > >>> even for the QA-team).
> > >>>
> > >>> Maybe someone at the qa project has an idea.
> > >>>
> > >>> André
> > >>
> > >> ---------------------------------------------------------------------
> > >> To unsubscribe, e-mail: dev-unsubscribe@...
> > >> For additional commands, e-mail: dev-help@...
> > >>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@...
> > For additional commands, e-mail: dev-help@...
> >
> --
> Lihua
>
>
> 北京红旗贰仟软件技术有限公司
> Beijing Redflag 2000 Software Co., Ltd.
> Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
> Beijing Economic-Technological Development Area
> Beijing - P.R.China
>
> Tel：[phone] ext.6141
> http://www.RedOffice.com
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@...
> For additional commands, e-mail: dev-help@...
>

--
Lihua


北京红旗贰仟软件技术有限公司
Beijing Redflag 2000 Software Co., Ltd.
Building No.2, Block A, Huilongsen, 18 Xihuan Nanlu
Beijing Economic-Technological Development Area
Beijing - P.R.China

Tel：[phone] ext.6141
http://www.RedOffice.com



---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...

[Gregor Hartmann-3]

Hi Lihua

sorry to hear it doesn't work that easy. The approarch that tbo used was
to copy used files in a directory, this aproach was different.

There is another way which I used earlier to help tbo in finding the
files needed.

Use strace and run the testtool. after some grep you can find out which
files were opened. these are the ones used. but be aware that not all
files used are opened at startup. Condiguration and UNO only open files
on demand. So a complete run would be necessary to show all files.

I used this command for tcsh:

strace -f testtool |& grep open | grep "<installdir>" | grep -v ENOENT

Using some sed or the like will output a nice script that copies the
used files to a new tree.

Maybe that works better.

best Regards
Gregor

> Hi Gregor,
>
> Thank you very much for the script.
>
> I tried, sorry, but it doesn't work.
>
> First, some how, build command dosen't work in a script. So I run this
> script manually. And when I got the list, and deleted all the .so files
> it contained in the "basis3.1/program" directory. Testtool.bin shows me
> "segment error". Finally I even tried to use ldd command to find out all
> the depend libs, and copy them back to "basis3.1/program" directory.
> testtool.bin still doesn't work.
>
>
> Do you have any other ideas? Or like tbo said in
> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0#dirlist
> :
> DEL: standalone TestTool is dead and won't be alive again due to CWS
> sb87/83.
>
>
> Thank you and best regards,
> Lihua
>
>
> 在 2009-10-27二的 13:04 +0100，Gregor Hartmann写道：
>> Hi,
>>
>> here is a script that outputs a list of filenames.
>>
>> ----------------------------------------- start
>>
>> cd $SRC_ROOT
>>
>> cd automation
>> build --all --show | grep "Building module" | sed "s/Building module //"
>>  > ../ttmodules
>> cd $SRC_ROOT
>>
>> cd instsetoo_native
>> build --all --show | grep "Building module" | sed "s/Building module //"
>>  > ../allmodules
>> cd $SRC_ROOT
>>
>> grep -v -f ttmodules -x < allmodules > modules
>>
>> xargs -I {} cat $SOLARVER/$INPATH/inc/\{\}/deliver.log < modules | cut
>> -d" " -f3 | sed "s,.*/,," | sort -u
>>
>> -------------------------------------- end
>>
>> I won't attach it as I don't know if it will be stripped or not. Please
>> be careful reassembling the lines.
>>
>> You need a sourcetree which is completely compiled a shell with set
>> environment and then source the script. (should work with bash and tcsh
>> and the like)
>>
>> After removing the listed files from the installed office the testtool
>> might still run. I did not try it, so no guarantee at all.
>>
>>
>> Please let us know if it works.
>>
>>
>> hth
>> Gregor
>>
>>
>>
>>
>>
>> Zhu Lihua schrieb:
>>> Hi Gregor,
>>>
>>> It's great that you are back. I'll wait for your script then. Thank you
>>> very much for the effort!
>>>
>>> Best regards,
>>> Lihua
>>>
>>> 在 2009-10-27二的 10:14 +0100，Gregor Hartmann写道：
>>>> Hi,
>>>>
>>>> never thought of removing unneeded files but a good startingpoint would
>>>> be to remove everything that was built after module automation (which
>>>> contains the vcltesttool).
>>>>
>>>> so one would need to get a list of the modules needed and get all files
>>>> delevered from the remaining modules. Then remove these files in the
>>>> installed office.
>>>>
>>>> One exception is the hid.lst but there might be others like some of the
>>>> *.rdb files.
>>>>
>>>> I will try to post a script which gets the filenames later.
>>>>
>>>> Gregor
>>>>
>>>> Andre Schnabel schrieb:
>>>>> Hi,
>>>>>
>>>>> -------- Original-Nachricht --------
>>>>>> Von: Zhu Lihua <zhulihua@...>
>>>>>>
>>>>>> I've built the openoffice.org on a loongson machine, include testtool.
>>>>>> I wonder how to split testtool out from the installation set? I need a
>>>>>> stand alone testtool.
>>>>> There once was a set of scripts in CVS:
>>>>> http://qa.openoffice.org/source/browse/qa/qatesttool/tools/standaloneTestTool/?hideattic=0
>>>>>
>>>>> Unfortunately it seems, as standalone testtool is not supported anymore.
>>>>> (What is somewhat strange, as it is the preferred way to use testtool
>>>>> even for the QA-team).
>>>>>
>>>>> Maybe someone at the qa project has an idea.
>>>>>
>>>>> André
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe@...
>>>> For additional commands, e-mail: dev-help@...
>>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@...
>> For additional commands, e-mail: dev-help@...
>>

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@...
For additional commands, e-mail: dev-help@...