Nabble - Linux Winmodem Support

Re: agrsm06pci-2.1.80-20090825_i386.deb for agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-27T05:36:54Z

Just to clarify, I am not sending these messages from the machine on
which I am trying to install this driver. If I need to install
anything, I have to be able to download from another machine and
transfer via thumb drive, etc.
Second, I just noticed that somehow the Ubuntu Linux got connected to
this message and may be confusing. I am not running Ubuntu, I am
running PCLinuxOS2009.

I already downloaded the deb file you mentioned. When I try to install
the driver with the dpkg command you provided earlier, I get a message
about command not found. This is not making sense to me since it
appears that the dkms is already installed, based on the list of
packages installed in the Package Manager. All packages related to dkms
are shown as installed.

So, I am confused. I cannot install the dkms without a modem and I
cannot install the modem driver without dkms. To top it off, it appears
that dkms is already installed.

Is there a source for dkms that I can download from another mashine? I
can try to reinstall dkms from that, if you think it would help.

Thanks.

Marvin Stodolsky wrote:

> agrsm06pci-2.1.80-20090825_i386.deb is at
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> but first install the dkms package, which will direct the driver
> compilation and installation.
>
> MarvS
>
>
> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke
> <mossianin_lbcmi@...> wrote:
>
>> I feel like I am missing something somewhere.
>> I originally downloaded the file agrsm06pci-2.1.80-20090825.tar.gz. After
>> unpacking, there are no *.deb files.
>> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb which I just
>> downloaded and tried to install with your directions. Now I get a "command
>> not found" message when attempting to do the dpkg command you provided.
>> As near as I can tell, the dkms is installed on the machine. I say that
>> because all dkms-related items in the Package Manager (PCLinux2009) are
>> listed as installed.
>> I am beginning to think I am in a doom-loop. I cannot install the driver
>> with dpkg, and I cannot connect to the internet to update any packages
>> because dial-up is my only means of connecting.
>> Any guidance would be appreciated.
>> Thanks for your efforts.
>>
>>
>> Marvin Stodolsky wrote:
>>
>>> Martin,
>>>
>>> Don't use the agrinst. FIrst install the dkms package, if you haven't
>>> already.
>>> Then start the install with
>>> $ sudo dpkg -i agrsm*.deb
>>> and the dkms system will take over.
>>>
>>> With the agrsm-tools.deb package previously installed, then run
>>> $ sudo agrsm-test
>>> for detection of your modem.
>>>
>>> MarvS
>>>
>>>
>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
>>> <mossianin_lbcmi@...> wrote:
>>>
>>>
>>>> I used the "find" command as you provided and found two entries which I
>>>> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and
>>>> received
>>>> the following results:
>>>> ./agrinst
>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>> some files needed for installation are missing
>>>>
>>>> I stopped there and dropped this note for help.
>>>> \Thanks.
>>>>
>>>>
>>>> Marvin Stodolsky wrote:
>>>>
>>>>
>>>>> Martin,
>>>>>
>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
>>>>> provide service for the 11c1:0630 chipset
>>>>> Best check that multiple driver sets are not installed somewhere:
>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>>>>
>>>>> If there are multiple. Best delete all and rerun the
>>>>> agrsm06pci-2.1.80~20090825.tar.gz install.
>>>>> If this was not the last installed delete all and rerun the
>>>>> agrsm06pci-2.1.80~20090825.tar.gz install
>>>>>
>>>>> It is not clear from your message below as to whether the wvdial
>>>>> package is installed or not.
>>>>> If not, from the bottom of http://linmodems.technion.ac.il/packages/
>>>>> get the wvdial_jaunty_i386.zip
>>>>> Under Linux
>>>>> $ unzip wv*.zip
>>>>> $ cd wvdial_jaunty_i386
>>>>> $ ls
>>>>> install with
>>>>> $ sudo dpkg -i *.deb
>>>>>
>>>>> Then rerun the
>>>>> $ sudo agrsm-test
>>>>>
>>>>> If successful, it will write a file /etc/wvdial.conf . Edit it with:
>>>>> $ sudo gedit /etc/wvdial.conf
>>>>> putting in personal info while deleting symbols: < > ;
>>>>>
>>>>> Then try a dialout with:
>>>>> $ sudo wvdial
>>>>>
>>>>> Upon a reboot the modem will be set up by:
>>>>> $ sudo modprobe agrserial
>>>>> You can check porsts with:
>>>>> $ ls -l /dev/AGR* /dev/SAGR
>>>>> and for driver loading:
>>>>> $ lsmod | grep agr
>>>>>
>>>>> Once you are online under Linux install the dkms driver update utility
>>>>> with:
>>>>> $ sudo apt-get update
>>>>> $ sudo apt-get install dkms
>>>>>
>>>>> MarvS
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>>>> <mossianin_lbcmi@...> wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Several weeks ago, I sent a message back that I had tried a couple of
>>>>>> driver
>>>>>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>>>>>> track since then. This is what I reported at that time.
>>>>>> I attempted to install the "agrsm-2.1.80limited" driver. The results
>>>>>> of
>>>>>> the
>>>>>> install are shown below:
>>>>>> ./agrinst
>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>>>> some files needed for installation are missing
>>>>>>
>>>>>>
>>>>>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>>>>>
>>>>>> Loading drivers:
>>>>>>
>>>>>> Drivers loaded:
>>>>>> agrserial 11088 0
>>>>>> agrmodem 1184932 1 agrserial
>>>>>>
>>>>>> and symbolic link created:
>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>>>>>
>>>>>> Checking for utility wvdialconf
>>>>>> Found /usr/bin/wvdialconf, preparing to run:
>>>>>> wvdialconf /etc/wvdial.conf
>>>>>>
>>>>>>
>>>>>> A reboot may be necessary before modem detection through:
>>>>>> sudo modprobe agrserial
>>>>>> Which will load agrmodem, agrserial and create the symbolic link
>>>>>> needed
>>>>>> for:
>>>>>> sudo wvdialconf
>>>>>>
>>>>>>
>>>>>>
>>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>>>>>> result as above.
>>>>>> Can you walk me thru what needs to be done now?
>>>>>>
>>>>>>
>>>>>> Thanks for all the help.
>>>>>>
>>>>>>
>>>>>> Jacques Goldberg wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> DONE but Martin the complete URL is
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>>>
>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks
>>>>>>> such
>>>>>>> a kind of file).
>>>>>>>
>>>>>>>
>>>>>>> Jacques
>>>>>>>
>>>>>>>
>>>>>>> Marvin Stodolsky wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Martin
>>>>>>>>
>>>>>>>> Attached is the tarball packaging.
>>>>>>>>
>>>>>>>> # tar zxvf agrsm.tar.gz
>>>>>>>> and see the 1stReadme.txt therein.
>>>>>>>> If you are not using the Deb installer previously sent,
>>>>>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>>>>>> dkms support.
>>>>>>>>
>>>>>>>> Jacques,
>>>>>>>> put in the 11c11040 folder please.
>>>>>>>>
>>>>>>>> MarvS
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>>>> is the correct address, but the server seems to be offline now.
>>>>>>>>> This happens occassional
>>>>>>>>>
>>>>>>>>> John
>>>>>>>>>
>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>>>>>> correct address. I'll also send you the Debian installer variant
>>>>>>>>>
>>>>>>>>> MarvS
>>>>>>>>>
>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>>>>>> 0630
>>>>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>>>> but I cannot find it. (The path 11c11040 does not appear to
>>>>>>>>>> exist.)
>>>>>>>>>> Later, it seems like there were additional steps to install this,
>>>>>>>>>> but
>>>>>>>>>> I got
>>>>>>>>>> totally lost trying to determine what should or should not be done.
>>>>>>>>>> Most
>>>>>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>>>>>> I am far from a Linux expert (obviously), but could someone help
>>>>>>>>>> clear
>>>>>>>>>> this
>>>>>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> john31608@... wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Marvin:
>>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card
>>>>>>>>>>> now
>>>>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04
>>>>>>>>>>> Jaunty
>>>>>>>>>>> and
>>>>>>>>>>> installation of the following:
>>>>>>>>>>>
>>>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>>>>>> wvdial
>>>>>>>>>>> with dependencies
>>>>>>>>>>>
>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>
>>>>>>>>>>> It was all double click and go with installation of agrmodem.ko
>>>>>>>>>>> and
>>>>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>>>
>>>>>>>>>>> It looks like at this point from the terminal sudo agrsm-test
>>>>>>>>>>> would
>>>>>>>>>>> have taken me to completion save for entering my name, password
>>>>>>>>>>> and
>>>>>>>>>>> phone
>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>>>>>
>>>>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>
>>>>>>>>>>> sudo modprobe agrmodem
>>>>>>>>>>>
>>>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>>>
>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset
>>>>>>>>>>> support
>>>>>>>>>>> installation ,using dkms tools" from the Linmodems discussion
>>>>>>>>>>> board
>>>>>>>>>>> of
>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file
>>>>>>>>>>> wvtest.
>>>>>>>>>>> sudo
>>>>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR.
>>>>>>>>>>> While
>>>>>>>>>>> trying
>>>>>>>>>>> to configure the network tools point to point connection interface
>>>>>>>>>>> I
>>>>>>>>>>> lost
>>>>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but
>>>>>>>>>>> sudo
>>>>>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>>>>>> phone
>>>>>>>>>>> and
>>>>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>>>>>> others
>>>>>>>>>>> who
>>>>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>>>>
>>>>>>>>>>> Yours truly, John W
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>
>>>
>
>

From forum: Linux Winmodem Support - Discussion

Re: agrsm06pci-2.1.80-20090825_i386.deb for agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-26T20:00:24Z

attached

On Thu, Nov 26, 2009 at 10:58 PM, Marvin Stodolsky
<marvin.stodolsky@...> wrote:

> agrsm06pci-2.1.80-20090825_i386.deb is at
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> but first install the dkms package, which will direct the driver
> compilation and installation.
>
> MarvS
>
>
> On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke
> <mossianin_lbcmi@...> wrote:
>> I feel like I am missing something somewhere.
>> I originally downloaded the file agrsm06pci-2.1.80-20090825.tar.gz. After
>> unpacking, there are no *.deb files.
>> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb which I just
>> downloaded and tried to install with your directions. Now I get a "command
>> not found" message when attempting to do the dpkg command you provided.
>> As near as I can tell, the dkms is installed on the machine. I say that
>> because all dkms-related items in the Package Manager (PCLinux2009) are
>> listed as installed.
>> I am beginning to think I am in a doom-loop. I cannot install the driver
>> with dpkg, and I cannot connect to the internet to update any packages
>> because dial-up is my only means of connecting.
>> Any guidance would be appreciated.
>> Thanks for your efforts.
>>
>>
>> Marvin Stodolsky wrote:
>>>
>>> Martin,
>>>
>>> Don't use the agrinst. FIrst install the dkms package, if you haven't
>>> already.
>>> Then start the install with
>>> $ sudo dpkg -i agrsm*.deb
>>> and the dkms system will take over.
>>>
>>> With the agrsm-tools.deb package previously installed, then run
>>> $ sudo agrsm-test
>>> for detection of your modem.
>>>
>>> MarvS
>>>
>>>
>>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
>>> <mossianin_lbcmi@...> wrote:
>>>
>>>>
>>>> I used the "find" command as you provided and found two entries which I
>>>> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and
>>>> received
>>>> the following results:
>>>> ./agrinst
>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>> some files needed for installation are missing
>>>>
>>>> I stopped there and dropped this note for help.
>>>> \Thanks.
>>>>
>>>>
>>>> Marvin Stodolsky wrote:
>>>>
>>>>>
>>>>> Martin,
>>>>>
>>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
>>>>> provide service for the 11c1:0630 chipset
>>>>> Best check that multiple driver sets are not installed somewhere:
>>>>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>>>>
>>>>> If there are multiple. Best delete all and rerun the
>>>>> agrsm06pci-2.1.80~20090825.tar.gz install.
>>>>> If this was not the last installed delete all and rerun the
>>>>> agrsm06pci-2.1.80~20090825.tar.gz install
>>>>>
>>>>> It is not clear from your message below as to whether the wvdial
>>>>> package is installed or not.
>>>>> If not, from the bottom of http://linmodems.technion.ac.il/packages/
>>>>> get the wvdial_jaunty_i386.zip
>>>>> Under Linux
>>>>> $ unzip wv*.zip
>>>>> $ cd wvdial_jaunty_i386
>>>>> $ ls
>>>>> install with
>>>>> $ sudo dpkg -i *.deb
>>>>>
>>>>> Then rerun the
>>>>> $ sudo agrsm-test
>>>>>
>>>>> If successful, it will write a file /etc/wvdial.conf . Edit it with:
>>>>> $ sudo gedit /etc/wvdial.conf
>>>>> putting in personal info while deleting symbols: < > ;
>>>>>
>>>>> Then try a dialout with:
>>>>> $ sudo wvdial
>>>>>
>>>>> Upon a reboot the modem will be set up by:
>>>>> $ sudo modprobe agrserial
>>>>> You can check porsts with:
>>>>> $ ls -l /dev/AGR* /dev/SAGR
>>>>> and for driver loading:
>>>>> $ lsmod | grep agr
>>>>>
>>>>> Once you are online under Linux install the dkms driver update utility
>>>>> with:
>>>>> $ sudo apt-get update
>>>>> $ sudo apt-get install dkms
>>>>>
>>>>> MarvS
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>>>> <mossianin_lbcmi@...> wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> Several weeks ago, I sent a message back that I had tried a couple of
>>>>>> driver
>>>>>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>>>>>> track since then. This is what I reported at that time.
>>>>>> I attempted to install the "agrsm-2.1.80limited" driver. The results
>>>>>> of
>>>>>> the
>>>>>> install are shown below:
>>>>>> ./agrinst
>>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>>>> some files needed for installation are missing
>>>>>>
>>>>>>
>>>>>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>>>>>
>>>>>> Loading drivers:
>>>>>>
>>>>>> Drivers loaded:
>>>>>> agrserial 11088 0
>>>>>> agrmodem 1184932 1 agrserial
>>>>>>
>>>>>> and symbolic link created:
>>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>>>>>
>>>>>> Checking for utility wvdialconf
>>>>>> Found /usr/bin/wvdialconf, preparing to run:
>>>>>> wvdialconf /etc/wvdial.conf
>>>>>>
>>>>>>
>>>>>> A reboot may be necessary before modem detection through:
>>>>>> sudo modprobe agrserial
>>>>>> Which will load agrmodem, agrserial and create the symbolic link
>>>>>> needed
>>>>>> for:
>>>>>> sudo wvdialconf
>>>>>>
>>>>>>
>>>>>>
>>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>>>>>> result as above.
>>>>>> Can you walk me thru what needs to be done now?
>>>>>>
>>>>>>
>>>>>> Thanks for all the help.
>>>>>>
>>>>>>
>>>>>> Jacques Goldberg wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> DONE but Martin the complete URL is
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>>>
>>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks
>>>>>>> such
>>>>>>> a kind of file).
>>>>>>>
>>>>>>>
>>>>>>> Jacques
>>>>>>>
>>>>>>>
>>>>>>> Marvin Stodolsky wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Martin
>>>>>>>>
>>>>>>>> Attached is the tarball packaging.
>>>>>>>>
>>>>>>>> # tar zxvf agrsm.tar.gz
>>>>>>>> and see the 1stReadme.txt therein.
>>>>>>>> If you are not using the Deb installer previously sent,
>>>>>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>>>>>> dkms support.
>>>>>>>>
>>>>>>>> Jacques,
>>>>>>>> put in the 11c11040 folder please.
>>>>>>>>
>>>>>>>> MarvS
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>>>> is the correct address, but the server seems to be offline now.
>>>>>>>>> This happens occassional
>>>>>>>>>
>>>>>>>>> John
>>>>>>>>>
>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>>>>>> correct address. I'll also send you the Debian installer variant
>>>>>>>>>
>>>>>>>>> MarvS
>>>>>>>>>
>>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>>>>>> 0630
>>>>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>>>> but I cannot find it. (The path 11c11040 does not appear to
>>>>>>>>>> exist.)
>>>>>>>>>> Later, it seems like there were additional steps to install this,
>>>>>>>>>> but
>>>>>>>>>> I got
>>>>>>>>>> totally lost trying to determine what should or should not be done.
>>>>>>>>>> Most
>>>>>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>>>>>> I am far from a Linux expert (obviously), but could someone help
>>>>>>>>>> clear
>>>>>>>>>> this
>>>>>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> john31608@... wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Marvin:
>>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card
>>>>>>>>>>> now
>>>>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04
>>>>>>>>>>> Jaunty
>>>>>>>>>>> and
>>>>>>>>>>> installation of the following:
>>>>>>>>>>>
>>>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>>>>>> wvdial
>>>>>>>>>>> with dependencies
>>>>>>>>>>>
>>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>
>>>>>>>>>>> It was all double click and go with installation of agrmodem.ko
>>>>>>>>>>> and
>>>>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>>>
>>>>>>>>>>> It looks like at this point from the terminal sudo agrsm-test
>>>>>>>>>>> would
>>>>>>>>>>> have taken me to completion save for entering my name, password
>>>>>>>>>>> and
>>>>>>>>>>> phone
>>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>>>>>
>>>>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>>
>>>>>>>>>>> sudo modprobe agrmodem
>>>>>>>>>>>
>>>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>>>
>>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset
>>>>>>>>>>> support
>>>>>>>>>>> installation ,using dkms tools" from the Linmodems discussion
>>>>>>>>>>> board
>>>>>>>>>>> of
>>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file
>>>>>>>>>>> wvtest.
>>>>>>>>>>> sudo
>>>>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR.
>>>>>>>>>>> While
>>>>>>>>>>> trying
>>>>>>>>>>> to configure the network tools point to point connection interface
>>>>>>>>>>> I
>>>>>>>>>>> lost
>>>>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but
>>>>>>>>>>> sudo
>>>>>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>>>>>> phone
>>>>>>>>>>> and
>>>>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>>>>>> others
>>>>>>>>>>> who
>>>>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>>>>
>>>>>>>>>>> Yours truly, John W
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>
>>>
>>
>

agrsm06pci_2.1.80~20090825_i386.deb (900K) Download Attachment

From forum: Linux Winmodem Support - Discussion

agrsm06pci-2.1.80-20090825_i386.deb for agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-26T19:58:43Z

agrsm06pci-2.1.80-20090825_i386.deb is at
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
but first install the dkms package, which will direct the driver
compilation and installation.

MarvS

On Thu, Nov 26, 2009 at 7:28 PM, Martin Lupcke
<mossianin_lbcmi@...> wrote:

> I feel like I am missing something somewhere.
> I originally downloaded the file agrsm06pci-2.1.80-20090825.tar.gz. After
> unpacking, there are no *.deb files.
> So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb which I just
> downloaded and tried to install with your directions. Now I get a "command
> not found" message when attempting to do the dpkg command you provided.
> As near as I can tell, the dkms is installed on the machine. I say that
> because all dkms-related items in the Package Manager (PCLinux2009) are
> listed as installed.
> I am beginning to think I am in a doom-loop. I cannot install the driver
> with dpkg, and I cannot connect to the internet to update any packages
> because dial-up is my only means of connecting.
> Any guidance would be appreciated.
> Thanks for your efforts.
>
>
> Marvin Stodolsky wrote:
>>
>> Martin,
>>
>> Don't use the agrinst. FIrst install the dkms package, if you haven't
>> already.
>> Then start the install with
>> $ sudo dpkg -i agrsm*.deb
>> and the dkms system will take over.
>>
>> With the agrsm-tools.deb package previously installed, then run
>> $ sudo agrsm-test
>> for detection of your modem.
>>
>> MarvS
>>
>>
>> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
>> <mossianin_lbcmi@...> wrote:
>>
>>>
>>> I used the "find" command as you provided and found two entries which I
>>> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and
>>> received
>>> the following results:
>>> ./agrinst
>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>> some files needed for installation are missing
>>>
>>> I stopped there and dropped this note for help.
>>> \Thanks.
>>>
>>>
>>> Marvin Stodolsky wrote:
>>>
>>>>
>>>> Martin,
>>>>
>>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
>>>> provide service for the 11c1:0630 chipset
>>>> Best check that multiple driver sets are not installed somewhere:
>>>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>>>
>>>> If there are multiple. Best delete all and rerun the
>>>> agrsm06pci-2.1.80~20090825.tar.gz install.
>>>> If this was not the last installed delete all and rerun the
>>>> agrsm06pci-2.1.80~20090825.tar.gz install
>>>>
>>>> It is not clear from your message below as to whether the wvdial
>>>> package is installed or not.
>>>> If not, from the bottom of http://linmodems.technion.ac.il/packages/
>>>> get the wvdial_jaunty_i386.zip
>>>> Under Linux
>>>> $ unzip wv*.zip
>>>> $ cd wvdial_jaunty_i386
>>>> $ ls
>>>> install with
>>>> $ sudo dpkg -i *.deb
>>>>
>>>> Then rerun the
>>>> $ sudo agrsm-test
>>>>
>>>> If successful, it will write a file /etc/wvdial.conf . Edit it with:
>>>> $ sudo gedit /etc/wvdial.conf
>>>> putting in personal info while deleting symbols: < > ;
>>>>
>>>> Then try a dialout with:
>>>> $ sudo wvdial
>>>>
>>>> Upon a reboot the modem will be set up by:
>>>> $ sudo modprobe agrserial
>>>> You can check porsts with:
>>>> $ ls -l /dev/AGR* /dev/SAGR
>>>> and for driver loading:
>>>> $ lsmod | grep agr
>>>>
>>>> Once you are online under Linux install the dkms driver update utility
>>>> with:
>>>> $ sudo apt-get update
>>>> $ sudo apt-get install dkms
>>>>
>>>> MarvS
>>>>
>>>>
>>>>
>>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>>> <mossianin_lbcmi@...> wrote:
>>>>
>>>>
>>>>>
>>>>> Several weeks ago, I sent a message back that I had tried a couple of
>>>>> driver
>>>>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>>>>> track since then. This is what I reported at that time.
>>>>> I attempted to install the "agrsm-2.1.80limited" driver. The results
>>>>> of
>>>>> the
>>>>> install are shown below:
>>>>> ./agrinst
>>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>>> some files needed for installation are missing
>>>>>
>>>>>
>>>>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>>>>
>>>>> Loading drivers:
>>>>>
>>>>> Drivers loaded:
>>>>> agrserial 11088 0
>>>>> agrmodem 1184932 1 agrserial
>>>>>
>>>>> and symbolic link created:
>>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>>>>
>>>>> Checking for utility wvdialconf
>>>>> Found /usr/bin/wvdialconf, preparing to run:
>>>>> wvdialconf /etc/wvdial.conf
>>>>>
>>>>>
>>>>> A reboot may be necessary before modem detection through:
>>>>> sudo modprobe agrserial
>>>>> Which will load agrmodem, agrserial and create the symbolic link
>>>>> needed
>>>>> for:
>>>>> sudo wvdialconf
>>>>>
>>>>>
>>>>>
>>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>>>>> result as above.
>>>>> Can you walk me thru what needs to be done now?
>>>>>
>>>>>
>>>>> Thanks for all the help.
>>>>>
>>>>>
>>>>> Jacques Goldberg wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> DONE but Martin the complete URL is
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>>
>>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks
>>>>>> such
>>>>>> a kind of file).
>>>>>>
>>>>>>
>>>>>> Jacques
>>>>>>
>>>>>>
>>>>>> Marvin Stodolsky wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Martin
>>>>>>>
>>>>>>> Attached is the tarball packaging.
>>>>>>>
>>>>>>> # tar zxvf agrsm.tar.gz
>>>>>>> and see the 1stReadme.txt therein.
>>>>>>> If you are not using the Deb installer previously sent,
>>>>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>>>>> dkms support.
>>>>>>>
>>>>>>> Jacques,
>>>>>>> put in the 11c11040 folder please.
>>>>>>>
>>>>>>> MarvS
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>>> is the correct address, but the server seems to be offline now.
>>>>>>>> This happens occassional
>>>>>>>>
>>>>>>>> John
>>>>>>>>
>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>>>>> correct address. I'll also send you the Debian installer variant
>>>>>>>>
>>>>>>>> MarvS
>>>>>>>>
>>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>>>>> 0630
>>>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>>> but I cannot find it. (The path 11c11040 does not appear to
>>>>>>>>> exist.)
>>>>>>>>> Later, it seems like there were additional steps to install this,
>>>>>>>>> but
>>>>>>>>> I got
>>>>>>>>> totally lost trying to determine what should or should not be done.
>>>>>>>>> Most
>>>>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>>>>> I am far from a Linux expert (obviously), but could someone help
>>>>>>>>> clear
>>>>>>>>> this
>>>>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>>>>
>>>>>>>>> Thanks.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> john31608@... wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Marvin:
>>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card
>>>>>>>>>> now
>>>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04
>>>>>>>>>> Jaunty
>>>>>>>>>> and
>>>>>>>>>> installation of the following:
>>>>>>>>>>
>>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>>>>> wvdial
>>>>>>>>>> with dependencies
>>>>>>>>>>
>>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>
>>>>>>>>>> It was all double click and go with installation of agrmodem.ko
>>>>>>>>>> and
>>>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>>
>>>>>>>>>> It looks like at this point from the terminal sudo agrsm-test
>>>>>>>>>> would
>>>>>>>>>> have taken me to completion save for entering my name, password
>>>>>>>>>> and
>>>>>>>>>> phone
>>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>>>>
>>>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>>
>>>>>>>>>> sudo modprobe agrmodem
>>>>>>>>>>
>>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>>
>>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset
>>>>>>>>>> support
>>>>>>>>>> installation ,using dkms tools" from the Linmodems discussion
>>>>>>>>>> board
>>>>>>>>>> of
>>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file
>>>>>>>>>> wvtest.
>>>>>>>>>> sudo
>>>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR.
>>>>>>>>>> While
>>>>>>>>>> trying
>>>>>>>>>> to configure the network tools point to point connection interface
>>>>>>>>>> I
>>>>>>>>>> lost
>>>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but
>>>>>>>>>> sudo
>>>>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>>>>> phone
>>>>>>>>>> and
>>>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>>>>> others
>>>>>>>>>> who
>>>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>>>
>>>>>>>>>> Yours truly, John W
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>
>>
>

From forum: Linux Winmodem Support - Discussion

Re: 536EP for Ubuntu Karmic

2009-11-26T19:19:03Z

Stephen,

I confirm your findings, which driver are you trying by the way?

Predictive diagnostics for card in bus 05:02.0:
Modem chipset detected on
NAME="Communication controller: Intel Corporation 536EP Data Fax Modem"
CLASS=0780
PCIDEV=8086:1040
SUBSYS=8086:1000
IRQ=5
IDENT=INTEL536EP

For candidate modem in: 05:02.0
0780 Communication controller: Intel Corporation 536EP Data Fax Modem
Primary device ID: 8086:1040
Support type needed or chipset: INTEL536EP

[root@localhost ~]# cd /home/olivares/Downloads/intel-536-537/
[root@localhost intel-536-537]# make clean
cd coredrv; make clean
make[1]: Entering directory `/home/olivares/Downloads/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/home/olivares/Downloads/intel-536-537/coredrv'
rm -f *.o *.ko
[root@localhost intel-536-537]# make 536
cd coredrv; make clean
make[1]: Entering directory `/home/olivares/Downloads/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/home/olivares/Downloads/intel-536-537/coredrv'
rm -f *.o *.ko
Module precompile check
Current running kernel is: 2.6.31.5-127.fc12.i686.PAE
/lib/modules... autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
version.h matches running kernel
make[1]: Entering directory `/home/olivares/Downloads/intel-536-537'
2.6.31.5-127.fc12.i686.PAE
make[2]: Entering directory `/home/olivares/Downloads/intel-536-537/coredrv'
make -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build
SUBDIRS=/home/olivares/Downloads/intel-536-537/coredrv modules
make[3]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/coredrv.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/clmmain.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/rts.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/task.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/uart.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/wwh_dflt.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/locks.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/softserial_io.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/softserial_ioctl.o
CC [M] /home/olivares/Downloads/intel-536-537/coredrv/softserial.o
/home/olivares/Downloads/intel-536-537/coredrv/softserial.c: In
function ‘softserial_background_event_handler’:
/home/olivares/Downloads/intel-536-537/coredrv/softserial.c:365:
error: request for member ‘ops’ in something not a structure or union
/home/olivares/Downloads/intel-536-537/coredrv/softserial.c:374:
error: request for member ‘ops’ in something not a structure or union
make[4]: *** [/home/olivares/Downloads/intel-536-537/coredrv/softserial.o]
Error 1
make[3]: *** [_module_/home/olivares/Downloads/intel-536-537/coredrv] Error 2
make[3]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
make[2]: *** [536core_26] Error 2
make[2]: Leaving directory `/home/olivares/Downloads/intel-536-537/coredrv'
2.6.31.5-127.fc12.i686.PAE
Failed to build driver
make[1]: Leaving directory `/home/olivares/Downloads/intel-536-537'
[root@localhost intel-536-537]#

Regards,

Antonio

On 11/25/09, S Pinker <stephenpinker79@...> wrote:

> Hello again,
> I seem unable to compile the Intel 536EP driver. I extracted it to /usr/src
> and ran make as root. Here is my output.
>
> # make 536
> cd coredrv; make clean
> make[1]: Entering directory `/usr/src/intel-536-537/coredrv'
> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
> rm -rf .tmp_versions
> make[1]: Leaving directory `/usr/src/intel-536-537/coredrv'
> rm -f *.o *.ko
> Module precompile check
> Current running kernel is: 2.6.31-14-generic
> /lib/modules... autoconf.h exists
> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> autoconf.h matches running kernel
> diff: /boot/vmlinuz.version.h: No such file or directory
> version.h matches running kernel
> make[1]: Entering directory `/usr/src/intel-536-537'
> 2.6.31-14-generic
> make[2]: Entering directory `/usr/src/intel-536-537/coredrv'
> make -C /lib/modules/2.6.31-14-generic/build
> SUBDIRS=/usr/src/intel-536-537/core
> drv modules
> make[3]: Entering directory `/usr/src/linux-headers-2.6.31-14-generic'
> CC [M] /usr/src/intel-536-537/coredrv/coredrv.o
> CC [M] /usr/src/intel-536-537/coredrv/clmmain.o
> CC [M] /usr/src/intel-536-537/coredrv/rts.o
> CC [M] /usr/src/intel-536-537/coredrv/task.o
> CC [M] /usr/src/intel-536-537/coredrv/uart.o
> CC [M] /usr/src/intel-536-537/coredrv/wwh_dflt.o
> CC [M] /usr/src/intel-536-537/coredrv/locks.o
> CC [M] /usr/src/intel-536-537/coredrv/softserial_io.o
> CC [M] /usr/src/intel-536-537/coredrv/softserial_ioctl.o
> CC [M] /usr/src/intel-536-537/coredrv/softserial.o
> /usr/src/intel-536-537/coredrv/softserial.c: In function
> ‘softserial_background_event_handler’:
> /usr/src/intel-536-537/coredrv/softserial.c:365: error: request for member
> ‘ops’ in something not a structure or union
> /usr/src/intel-536-537/coredrv/softserial.c:374: error: request for member
> ‘ops’ in something not a structure or union
> make[4]: *** [/usr/src/intel-536-537/coredrv/softserial.o] Error 1
> make[3]: *** [_module_/usr/src/intel-536-537/coredrv] Error 2
> make[3]: Leaving directory `/usr/src/linux-headers-2.6.31-14-generic'
> make[2]: *** [536core_26] Error 2
> make[2]: Leaving directory `/usr/src/intel-536-537/coredrv'
> 2.6.31-14-generic
> Failed to build driver
> make[1]: Leaving directory `/usr/src/intel-536-537'
>
>
>
> Stephen Pinker
> http://groups.google.com/group/ubuntu-modems?hl=en
>
>
>
>

From forum: Linux Winmodem Support - Discussion

Re: agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-26T14:29:42Z

I feel like I am missing something somewhere.

I originally downloaded the file agrsm06pci-2.1.80-20090825.tar.gz.
After unpacking, there are no *.deb files.

So, I rechecked and found agrsm06pci-2.1.80-20090825_i386.deb which I
just downloaded and tried to install with your directions. Now I get a
"command not found" message when attempting to do the dpkg command you
provided.

As near as I can tell, the dkms is installed on the machine. I say that
because all dkms-related items in the Package Manager (PCLinux2009) are
listed as installed.

I am beginning to think I am in a doom-loop. I cannot install the
driver with dpkg, and I cannot connect to the internet to update any
packages because dial-up is my only means of connecting.

Any guidance would be appreciated.

Thanks for your efforts.

Marvin Stodolsky wrote:

> Martin,
>
> Don't use the agrinst. FIrst install the dkms package, if you haven't already.
> Then start the install with
> $ sudo dpkg -i agrsm*.deb
> and the dkms system will take over.
>
> With the agrsm-tools.deb package previously installed, then run
> $ sudo agrsm-test
> for detection of your modem.
>
> MarvS
>
>
> On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
> <mossianin_lbcmi@...> wrote:
>
>> I used the "find" command as you provided and found two entries which I
>> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and received
>> the following results:
>> ./agrinst
>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>> some files needed for installation are missing
>>
>> I stopped there and dropped this note for help.
>> \Thanks.
>>
>>
>> Marvin Stodolsky wrote:
>>
>>> Martin,
>>>
>>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
>>> provide service for the 11c1:0630 chipset
>>> Best check that multiple driver sets are not installed somewhere:
>>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>>
>>> If there are multiple. Best delete all and rerun the
>>> agrsm06pci-2.1.80~20090825.tar.gz install.
>>> If this was not the last installed delete all and rerun the
>>> agrsm06pci-2.1.80~20090825.tar.gz install
>>>
>>> It is not clear from your message below as to whether the wvdial
>>> package is installed or not.
>>> If not, from the bottom of http://linmodems.technion.ac.il/packages/
>>> get the wvdial_jaunty_i386.zip
>>> Under Linux
>>> $ unzip wv*.zip
>>> $ cd wvdial_jaunty_i386
>>> $ ls
>>> install with
>>> $ sudo dpkg -i *.deb
>>>
>>> Then rerun the
>>> $ sudo agrsm-test
>>>
>>> If successful, it will write a file /etc/wvdial.conf . Edit it with:
>>> $ sudo gedit /etc/wvdial.conf
>>> putting in personal info while deleting symbols: < > ;
>>>
>>> Then try a dialout with:
>>> $ sudo wvdial
>>>
>>> Upon a reboot the modem will be set up by:
>>> $ sudo modprobe agrserial
>>> You can check porsts with:
>>> $ ls -l /dev/AGR* /dev/SAGR
>>> and for driver loading:
>>> $ lsmod | grep agr
>>>
>>> Once you are online under Linux install the dkms driver update utility
>>> with:
>>> $ sudo apt-get update
>>> $ sudo apt-get install dkms
>>>
>>> MarvS
>>>
>>>
>>>
>>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>>> <mossianin_lbcmi@...> wrote:
>>>
>>>
>>>> Several weeks ago, I sent a message back that I had tried a couple of
>>>> driver
>>>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>>>> track since then. This is what I reported at that time.
>>>> I attempted to install the "agrsm-2.1.80limited" driver. The results of
>>>> the
>>>> install are shown below:
>>>> ./agrinst
>>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>>> some files needed for installation are missing
>>>>
>>>>
>>>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>>>
>>>> Loading drivers:
>>>>
>>>> Drivers loaded:
>>>> agrserial 11088 0
>>>> agrmodem 1184932 1 agrserial
>>>>
>>>> and symbolic link created:
>>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>>>
>>>> Checking for utility wvdialconf
>>>> Found /usr/bin/wvdialconf, preparing to run:
>>>> wvdialconf /etc/wvdial.conf
>>>>
>>>>
>>>> A reboot may be necessary before modem detection through:
>>>> sudo modprobe agrserial
>>>> Which will load agrmodem, agrserial and create the symbolic link needed
>>>> for:
>>>> sudo wvdialconf
>>>>
>>>>
>>>>
>>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>>>> result as above.
>>>> Can you walk me thru what needs to be done now?
>>>>
>>>>
>>>> Thanks for all the help.
>>>>
>>>>
>>>> Jacques Goldberg wrote:
>>>>
>>>>
>>>>> DONE but Martin the complete URL is
>>>>>
>>>>>
>>>>>
>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>>
>>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks
>>>>> such
>>>>> a kind of file).
>>>>>
>>>>>
>>>>> Jacques
>>>>>
>>>>>
>>>>> Marvin Stodolsky wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Martin
>>>>>>
>>>>>> Attached is the tarball packaging.
>>>>>>
>>>>>> # tar zxvf agrsm.tar.gz
>>>>>> and see the 1stReadme.txt therein.
>>>>>> If you are not using the Deb installer previously sent,
>>>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>>>> dkms support.
>>>>>>
>>>>>> Jacques,
>>>>>> put in the 11c11040 folder please.
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>>> is the correct address, but the server seems to be offline now.
>>>>>>> This happens occassional
>>>>>>>
>>>>>>> John
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>>>> correct address. I'll also send you the Debian installer variant
>>>>>>>
>>>>>>> MarvS
>>>>>>>
>>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>>>> 0630
>>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>>
>>>>>>>>
>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>>> but I cannot find it. (The path 11c11040 does not appear to exist.)
>>>>>>>> Later, it seems like there were additional steps to install this,
>>>>>>>> but
>>>>>>>> I got
>>>>>>>> totally lost trying to determine what should or should not be done.
>>>>>>>> Most
>>>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>>>> I am far from a Linux expert (obviously), but could someone help
>>>>>>>> clear
>>>>>>>> this
>>>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>>
>>>>>>>> john31608@... wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Marvin:
>>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card now
>>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04
>>>>>>>>> Jaunty
>>>>>>>>> and
>>>>>>>>> installation of the following:
>>>>>>>>>
>>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>>>> wvdial
>>>>>>>>> with dependencies
>>>>>>>>>
>>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>
>>>>>>>>> It was all double click and go with installation of agrmodem.ko and
>>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>>
>>>>>>>>> It looks like at this point from the terminal sudo agrsm-test
>>>>>>>>> would
>>>>>>>>> have taken me to completion save for entering my name, password and
>>>>>>>>> phone
>>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>>>
>>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>>
>>>>>>>>> sudo modprobe agrmodem
>>>>>>>>>
>>>>>>>>> sudo modprobe agrserial
>>>>>>>>>
>>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset support
>>>>>>>>> installation ,using dkms tools" from the Linmodems discussion board
>>>>>>>>> of
>>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file wvtest.
>>>>>>>>> sudo
>>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR. While
>>>>>>>>> trying
>>>>>>>>> to configure the network tools point to point connection interface
>>>>>>>>> I
>>>>>>>>> lost
>>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but
>>>>>>>>> sudo
>>>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>>>> phone
>>>>>>>>> and
>>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>>>> others
>>>>>>>>> who
>>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>>
>>>>>>>>> Yours truly, John W
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>
>>>
>
>

From forum: Linux Winmodem Support - Discussion

Re: agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-26T11:12:44Z

Martin,

Don't use the agrinst. FIrst install the dkms package, if you haven't already.
Then start the install with
$ sudo dpkg -i agrsm*.deb
and the dkms system will take over.

With the agrsm-tools.deb package previously installed, then run
$ sudo agrsm-test
for detection of your modem.

MarvS

On Thu, Nov 26, 2009 at 3:57 PM, Martin Lupcke
<mossianin_lbcmi@...> wrote:

> I used the "find" command as you provided and found two entries which I
> deleted. I then went to install the agrsm06pci-2.1.80-20090825 and received
> the following results:
> ./agrinst
> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
> some files needed for installation are missing
>
> I stopped there and dropped this note for help.
> \Thanks.
>
>
> Marvin Stodolsky wrote:
>>
>> Martin,
>>
>> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
>> provide service for the 11c1:0630 chipset
>> Best check that multiple driver sets are not installed somewhere:
>> $ find /lib/modules/$(uname -r) -name agr*.ko
>>
>> If there are multiple. Best delete all and rerun the
>> agrsm06pci-2.1.80~20090825.tar.gz install.
>> If this was not the last installed delete all and rerun the
>> agrsm06pci-2.1.80~20090825.tar.gz install
>>
>> It is not clear from your message below as to whether the wvdial
>> package is installed or not.
>> If not, from the bottom of http://linmodems.technion.ac.il/packages/
>> get the wvdial_jaunty_i386.zip
>> Under Linux
>> $ unzip wv*.zip
>> $ cd wvdial_jaunty_i386
>> $ ls
>> install with
>> $ sudo dpkg -i *.deb
>>
>> Then rerun the
>> $ sudo agrsm-test
>>
>> If successful, it will write a file /etc/wvdial.conf . Edit it with:
>> $ sudo gedit /etc/wvdial.conf
>> putting in personal info while deleting symbols: < > ;
>>
>> Then try a dialout with:
>> $ sudo wvdial
>>
>> Upon a reboot the modem will be set up by:
>> $ sudo modprobe agrserial
>> You can check porsts with:
>> $ ls -l /dev/AGR* /dev/SAGR
>> and for driver loading:
>> $ lsmod | grep agr
>>
>> Once you are online under Linux install the dkms driver update utility
>> with:
>> $ sudo apt-get update
>> $ sudo apt-get install dkms
>>
>> MarvS
>>
>>
>>
>> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
>> <mossianin_lbcmi@...> wrote:
>>
>>>
>>> Several weeks ago, I sent a message back that I had tried a couple of
>>> driver
>>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>>> track since then. This is what I reported at that time.
>>> I attempted to install the "agrsm-2.1.80limited" driver. The results of
>>> the
>>> install are shown below:
>>> ./agrinst
>>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>>> some files needed for installation are missing
>>>
>>>
>>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>>
>>> Loading drivers:
>>>
>>> Drivers loaded:
>>> agrserial 11088 0
>>> agrmodem 1184932 1 agrserial
>>>
>>> and symbolic link created:
>>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>>
>>> Checking for utility wvdialconf
>>> Found /usr/bin/wvdialconf, preparing to run:
>>> wvdialconf /etc/wvdial.conf
>>>
>>>
>>> A reboot may be necessary before modem detection through:
>>> sudo modprobe agrserial
>>> Which will load agrmodem, agrserial and create the symbolic link needed
>>> for:
>>> sudo wvdialconf
>>>
>>>
>>>
>>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>>> result as above.
>>> Can you walk me thru what needs to be done now?
>>>
>>>
>>> Thanks for all the help.
>>>
>>>
>>> Jacques Goldberg wrote:
>>>
>>>>
>>>> DONE but Martin the complete URL is
>>>>
>>>>
>>>>
>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>>
>>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks
>>>> such
>>>> a kind of file).
>>>>
>>>>
>>>> Jacques
>>>>
>>>>
>>>> Marvin Stodolsky wrote:
>>>>
>>>>
>>>>>
>>>>> Martin
>>>>>
>>>>> Attached is the tarball packaging.
>>>>>
>>>>> # tar zxvf agrsm.tar.gz
>>>>> and see the 1stReadme.txt therein.
>>>>> If you are not using the Deb installer previously sent,
>>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>>> dkms support.
>>>>>
>>>>> Jacques,
>>>>> put in the 11c11040 folder please.
>>>>>
>>>>> MarvS
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>>> is the correct address, but the server seems to be offline now.
>>>>>> This happens occassional
>>>>>>
>>>>>> John
>>>>>>
>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>>> correct address. I'll also send you the Debian installer variant
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>>> 0630
>>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>>> but I cannot find it. (The path 11c11040 does not appear to exist.)
>>>>>>> Later, it seems like there were additional steps to install this,
>>>>>>> but
>>>>>>> I got
>>>>>>> totally lost trying to determine what should or should not be done.
>>>>>>> Most
>>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>>> I am far from a Linux expert (obviously), but could someone help
>>>>>>> clear
>>>>>>> this
>>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>>
>>>>>>> john31608@... wrote:
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Marvin:
>>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card now
>>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04
>>>>>>>> Jaunty
>>>>>>>> and
>>>>>>>> installation of the following:
>>>>>>>>
>>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>>> wvdial
>>>>>>>> with dependencies
>>>>>>>>
>>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>
>>>>>>>> It was all double click and go with installation of agrmodem.ko and
>>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>>
>>>>>>>> It looks like at this point from the terminal sudo agrsm-test
>>>>>>>> would
>>>>>>>> have taken me to completion save for entering my name, password and
>>>>>>>> phone
>>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>>
>>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>>
>>>>>>>> sudo modprobe agrmodem
>>>>>>>>
>>>>>>>> sudo modprobe agrserial
>>>>>>>>
>>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset support
>>>>>>>> installation ,using dkms tools" from the Linmodems discussion board
>>>>>>>> of
>>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file wvtest.
>>>>>>>> sudo
>>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR. While
>>>>>>>> trying
>>>>>>>> to configure the network tools point to point connection interface
>>>>>>>> I
>>>>>>>> lost
>>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but
>>>>>>>> sudo
>>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>>> phone
>>>>>>>> and
>>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>>> others
>>>>>>>> who
>>>>>>>> have been so patient with all this. Thank You
>>>>>>>>
>>>>>>>> Yours truly, John W
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>
>>>>
>>
>>
>

From forum: Linux Winmodem Support - Discussion

Re: RonL, USA kernel 2.6.31-14-generic

2009-11-26T11:01:38Z

> ----- Original Message -----
> *From:* Ronald Liebman <ronald.liebman@...>
> *To:* Antonio Olivares <olivares14031@...>
> *CC:* DISCUSS@...
> *Sent:* 11/26/2009 12:56:00 PM -0600
> *Subject:* RonL, USA kernel 2.6.31-14-generic
>

> Antonio,
>
> Happy Thanksgiving. Thanks for the prompt reply.
>
> Based on your analysis, it appears that all of my current options are
> weak ones. I don't wish to cripple my desktop machine (32-bit
> reinstall) just to support my dial back-up capability. That seems to
> mean that I must wait for agrsm support for 2.6.31 (if that ever
> happens). I appreciate your offer to send me the module that you
> built for Slax, but I think that I am too new to Linux to try using an
> unfamiliar kernel and UI.
>
> I guess if push comes to shove, I'll have to do what I did this past
> week while I awaited delivery of my replacement DSL modem. I carried
> a laptop to the nearest free wireless site. (At least I benefited
> from higher bandwidth than I could get from dial-up.)
>
> Let me know, please, if any other possibilities come to mind.
>
> Best wishes,
> Ron
>> ----- Original Message -----
>> *From:* Antonio Olivares <olivares14031@...>
>> *To:* Ronald Liebman <ronald.liebman@...>
>> *CC:* DISCUSS@...
>> *Sent:* 11/26/2009 7:47:29 AM -0600
>> *Subject:* RonL, USA kernel 2.6.31-14-generic
>>
>
>> Ronald,
>>
>> scanModem reports that you have an agrsm modem with chipset 11c1:0630 modem.
>>
>> -------------------------------------------------------------------------
>> Predictive diagnostics for card in bus 04:00.0:
>> Modem chipset detected on
>> NAME="Communication controller: Agere Systems Device 0630 "
>> CLASS=0780
>> PCIDEV=11c1:0630
>> SUBSYS=11c1:0630
>> IRQ=7
>> IDENT=agrsm
>>
>> For candidate modem in: 04:00.0
>> 0780 Communication controller: Agere Systems Device 0630
>> Primary device ID: 11c1:0630
>> Support type needed or chipset: agrsm
>>
>>
>>
>>
>> There is no agrsm software support for x86_64 systems, through the
>> modem may be
>> supported on Intel/i386 installations, which do more slowly servce
>> x86_64 processors.
>>
>>
>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
>> agrserial driver pair.
>> There are a few different chipsets which use this driver pair, but
>> they use different code resources:
>> Chipsets KV* PackageNames (most current as
>> of November 2009)
>> ----------------------------------------------------------------------------------------------
>> 11c1:048c and 11c1:048f 2.6.29
>> agrsm048pci-2.1.60_20091022_i386.deb or
>> agrsm048pci-2.1.60_20091022.tar.gz
>> 11c1:0620 2.6.28
>> agrsm06pci_2.1.80~20090825_i386.deb or
>> agrsm06pci_2.1.80~20090825_i386.tar.gz
>> 11c11040 (on HDA audio cards) 2.6.27
>> dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or
>> agrsm-2.1.80-10mdv2009.0.tar.gz
>> All available at:
>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
>> additionally
>> automation & testing agrsm-tools_0.0.1_all.deb or
>> agrsm-tools-0.0.1-2.noarch.rpm
>> General background agrsm_howto.txt
>> for rpm variants of dkms-agrsm , see
>> http://linux.zsolttech.com/linmodem/agrsm/
>> ------------------------------------------------------------------------------------------------
>> * KV == latest kernel release with a reported success
>>
>> All of the above packages are dkms competent. This means that if
>> your Linux distros dkms package
>> is previously installed, if provides for future updates matching
>> forthcoming kernels.
>>
>> -------------- end Agere Systems section -------------------
>>
>> I have tried several drivers for this particular modem and I have
>> found that the following driver:
>>
>> 11c1:0620 2.6.28
>> agrsm06pci_2.1.80~20090825_i386.deb or
>> agrsm06pci_2.1.80~20090825_i386.tar.gz
>>
>> the one for 11c1:0620 which I have made to work under 2.6.27.27 Slax
>> kernel and I had previously tried multiple times and several others
>> reported success.
>>
>> For your kernel and CPU it will not work since it is 64 Bit :(
>>
>> CPU=x86_64,
>> Linux version 2.6.31-14-generic
>>
>> There is no agrsm software support for x86_64 systems, through the
>> modem may be supported on Intel/i386 installations, which do more
>> slowly servce x86_64 processors.
>>
>> This is the bad part :(. If you install a non 64 bit OS, then you
>> might have a chance with a previous 2.6.27/28 based kernel, but not
>> with 2.6.31 at this time :(
>>
>> If you decide to reinstall but in 32 bit mode only, try to install wvdial :
>>
>> The dialer utility package WVDIAL does not appear to be installed on
>> your System.
>> For Ubuntu Jaunty users, there are at the bottom of
>> http://linmodems.technion.ac.il/packages/:
>> wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
>> wvdial_jaunty_i386.zip for 32 bit systems.
>> These are about 1 MB in size. After downloaded and copied into your
>> Linux partition:
>> $ unzip wv*.zip
>> Within the new folder:
>> $ sudo dpkg -i *.deb
>> will complete the wvdial installation
>> Please read Modem/DOCs/wvdial.txt for usage information.
>>
>> You can try Slax Live CD for which I built a module(Slax's package
>> built for Slax), for the 11c1:0620 which might work for your modem
>> (11c1:0630), if you wish to give that a try before reinstalling let me
>> know and I'll email you the module and then you may let us know if it
>> works or not.
>>
>> Regards,
>>
>> Antonio
>>
>> On 11/25/09, Ronald Liebman <ronald.liebman@...> wrote:
>>
>>> Please help me interpret the attached diagnostics. This is a dual-boot
>>> machine, and Win7 sees a softmodem.
>>>
>>> Thanks.
>>>
>>>
>>
>>

From forum: Linux Winmodem Support - Discussion

Re: RonL, USA kernel 2.6.31-14-generic

2009-11-26T11:01:14Z

Ron,

Sadly for host systems with CPU=x86_64,
the agrsm code cannot serve, because there is an incompatible
precompiled 32 bit component.

While we have asked LSI (formerly AgereSystems) for a 64 bit compile,
it has for a few years not as yet been done.

Additionally, the agrsm06pci_2.1.80 code package was last successfull
under 2.6.28 kernels.
A volunteer upgrade to 2.6.31 will likely get done soon.
At that time the modem could be served if you installed the 32 bit Ubuntu code.
Read the InfoGeneral.txt if you want to consider other modem hardware
for the short term

MarvS
scanModem maintainer

On Thu, Nov 26, 2009 at 8:47 AM, Antonio Olivares
<olivares14031@...> wrote:

> Ronald,
>
> scanModem reports that you have an agrsm modem with chipset 11c1:0630 modem.
>
> -------------------------------------------------------------------------
> Predictive diagnostics for card in bus 04:00.0:
> Modem chipset detected on
> NAME="Communication controller: Agere Systems Device 0630 "
> CLASS=0780
> PCIDEV=11c1:0630
> SUBSYS=11c1:0630
> IRQ=7
> IDENT=agrsm
>
> For candidate modem in: 04:00.0
> 0780 Communication controller: Agere Systems Device 0630
> Primary device ID: 11c1:0630
> Support type needed or chipset: agrsm
>
>
>
>
> There is no agrsm software support for x86_64 systems, through the
> modem may be
> supported on Intel/i386 installations, which do more slowly servce
> x86_64 processors.
>
>
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> agrserial driver pair.
> There are a few different chipsets which use this driver pair, but
> they use different code resources:
> Chipsets KV* PackageNames (most current as
> of November 2009)
> ----------------------------------------------------------------------------------------------
> 11c1:048c and 11c1:048f 2.6.29
> agrsm048pci-2.1.60_20091022_i386.deb or
> agrsm048pci-2.1.60_20091022.tar.gz
> 11c1:0620 2.6.28
> agrsm06pci_2.1.80~20090825_i386.deb or
> agrsm06pci_2.1.80~20090825_i386.tar.gz
> 11c11040 (on HDA audio cards) 2.6.27
> dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or
> agrsm-2.1.80-10mdv2009.0.tar.gz
> All available at:
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
> additionally
> automation & testing agrsm-tools_0.0.1_all.deb or
> agrsm-tools-0.0.1-2.noarch.rpm
> General background agrsm_howto.txt
> for rpm variants of dkms-agrsm , see
> http://linux.zsolttech.com/linmodem/agrsm/
> ------------------------------------------------------------------------------------------------
> * KV == latest kernel release with a reported success
>
> All of the above packages are dkms competent. This means that if
> your Linux distros dkms package
> is previously installed, if provides for future updates matching
> forthcoming kernels.
>
> -------------- end Agere Systems section -------------------
>
> I have tried several drivers for this particular modem and I have
> found that the following driver:
>
> 11c1:0620 2.6.28
> agrsm06pci_2.1.80~20090825_i386.deb or
> agrsm06pci_2.1.80~20090825_i386.tar.gz
>
> the one for 11c1:0620 which I have made to work under 2.6.27.27 Slax
> kernel and I had previously tried multiple times and several others
> reported success.
>
> For your kernel and CPU it will not work since it is 64 Bit :(
>
> CPU=x86_64,
> Linux version 2.6.31-14-generic
>
> There is no agrsm software support for x86_64 systems, through the
> modem may be supported on Intel/i386 installations, which do more
> slowly servce x86_64 processors.
>
> This is the bad part :(. If you install a non 64 bit OS, then you
> might have a chance with a previous 2.6.27/28 based kernel, but not
> with 2.6.31 at this time :(
>
> If you decide to reinstall but in 32 bit mode only, try to install wvdial :
>
> The dialer utility package WVDIAL does not appear to be installed on
> your System.
> For Ubuntu Jaunty users, there are at the bottom of
> http://linmodems.technion.ac.il/packages/:
> wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
> wvdial_jaunty_i386.zip for 32 bit systems.
> These are about 1 MB in size. After downloaded and copied into your
> Linux partition:
> $ unzip wv*.zip
> Within the new folder:
> $ sudo dpkg -i *.deb
> will complete the wvdial installation
> Please read Modem/DOCs/wvdial.txt for usage information.
>
> You can try Slax Live CD for which I built a module(Slax's package
> built for Slax), for the 11c1:0620 which might work for your modem
> (11c1:0630), if you wish to give that a try before reinstalling let me
> know and I'll email you the module and then you may let us know if it
> works or not.
>
> Regards,
>
> Antonio
>
> On 11/25/09, Ronald Liebman <ronald.liebman@...> wrote:
>> Please help me interpret the attached diagnostics. This is a dual-boot
>> machine, and Win7 sees a softmodem.
>>
>> Thanks.
>>
>

From forum: Linux Winmodem Support - Discussion

Re: agrsm 11c1:0620 modem installation on Ubuntu Jaunty 9.04

2009-11-26T10:57:32Z

I used the "find" command as you provided and found two entries which I
deleted. I then went to install the agrsm06pci-2.1.80-20090825 and
received the following results:

./agrinst
Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
some files needed for installation are missing

I stopped there and dropped this note for help.

\Thanks.

Marvin Stodolsky wrote:

> Martin,
>
> agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
> provide service for the 11c1:0630 chipset
> Best check that multiple driver sets are not installed somewhere:
> $ find /lib/modules/$(uname -r) -name agr*.ko
>
> If there are multiple. Best delete all and rerun the
> agrsm06pci-2.1.80~20090825.tar.gz install.
> If this was not the last installed delete all and rerun the
> agrsm06pci-2.1.80~20090825.tar.gz install
>
> It is not clear from your message below as to whether the wvdial
> package is installed or not.
> If not, from the bottom of http://linmodems.technion.ac.il/packages/
> get the wvdial_jaunty_i386.zip
> Under Linux
> $ unzip wv*.zip
> $ cd wvdial_jaunty_i386
> $ ls
> install with
> $ sudo dpkg -i *.deb
>
> Then rerun the
> $ sudo agrsm-test
>
> If successful, it will write a file /etc/wvdial.conf . Edit it with:
> $ sudo gedit /etc/wvdial.conf
> putting in personal info while deleting symbols: < > ;
>
> Then try a dialout with:
> $ sudo wvdial
>
> Upon a reboot the modem will be set up by:
> $ sudo modprobe agrserial
> You can check porsts with:
> $ ls -l /dev/AGR* /dev/SAGR
> and for driver loading:
> $ lsmod | grep agr
>
> Once you are online under Linux install the dkms driver update utility with:
> $ sudo apt-get update
> $ sudo apt-get install dkms
>
> MarvS
>
>
>
> On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
> <mossianin_lbcmi@...> wrote:
>
>> Several weeks ago, I sent a message back that I had tried a couple of driver
>> packages to get my 11c1:0630 modem working. Unfortunately, I have lost
>> track since then. This is what I reported at that time.
>> I attempted to install the "agrsm-2.1.80limited" driver. The results of the
>> install are shown below:
>> ./agrinst
>> Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
>> some files needed for installation are missing
>>
>>
>> For kicks, I ran the agrsm-test. The results of that are listed below:
>>
>> Loading drivers:
>>
>> Drivers loaded:
>> agrserial 11088 0
>> agrmodem 1184932 1 agrserial
>>
>> and symbolic link created:
>> lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
>>
>> Checking for utility wvdialconf
>> Found /usr/bin/wvdialconf, preparing to run:
>> wvdialconf /etc/wvdial.conf
>>
>>
>> A reboot may be necessary before modem detection through:
>> sudo modprobe agrserial
>> Which will load agrmodem, agrserial and create the symbolic link needed
>> for:
>> sudo wvdialconf
>>
>>
>>
>> I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
>> result as above.
>> Can you walk me thru what needs to be done now?
>>
>>
>> Thanks for all the help.
>>
>>
>> Jacques Goldberg wrote:
>>
>>> DONE but Martin the complete URL is
>>>
>>>
>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
>>>
>>> not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks such
>>> a kind of file).
>>>
>>>
>>> Jacques
>>>
>>>
>>> Marvin Stodolsky wrote:
>>>
>>>
>>>> Martin
>>>>
>>>> Attached is the tarball packaging.
>>>>
>>>> # tar zxvf agrsm.tar.gz
>>>> and see the 1stReadme.txt therein.
>>>> If you are not using the Deb installer previously sent,
>>>> the best place to unpack it is in /usr/src/ to potentially enable the
>>>> dkms support.
>>>>
>>>> Jacques,
>>>> put in the 11c11040 folder please.
>>>>
>>>> MarvS
>>>>
>>>>
>>>>
>>>> On Sat, Aug 29, 2009 at 7:24 PM, Marvin
>>>> Stodolsky<marvin.stodolsky@...> wrote:
>>>>
>>>>
>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/
>>>>> is the correct address, but the server seems to be offline now.
>>>>> This happens occassional
>>>>>
>>>>> John
>>>>>
>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
>>>>> correct address. I'll also send you the Debian installer variant
>>>>>
>>>>> MarvS
>>>>>
>>>>> On Sat, Aug 29, 2009 at 5:21 PM, Martin
>>>>> Lupcke<mossianin_lbcmi@...> wrote:
>>>>>
>>>>>
>>>>>> I have been trying to follow the recent messages on the 11c1:0620 &
>>>>>> 0630
>>>>>> modems. On the 24th, Jacques put a file at
>>>>>>
>>>>>> http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
>>>>>> but I cannot find it. (The path 11c11040 does not appear to exist.)
>>>>>> Later, it seems like there were additional steps to install this, but
>>>>>> I got
>>>>>> totally lost trying to determine what should or should not be done.
>>>>>> Most
>>>>>> recently (below), it seems that John got an 0620 working in Ubuntu.
>>>>>> I am far from a Linux expert (obviously), but could someone help clear
>>>>>> this
>>>>>> up for me so I can try to get my 0630 working in PCLinux?
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>> john31608@... wrote:
>>>>>>
>>>>>>
>>>>>>> Marvin:
>>>>>>> I want you to know I have the agere SV92PP 11c10620 modem card now
>>>>>>> running reliably. I went with a fresh reinstall of Ubuntu9.04 Jaunty
>>>>>>> and
>>>>>>> installation of the following:
>>>>>>>
>>>>>>> agrsm-tools_0.0.1_all.deb
>>>>>>> dkms_2.0.21.1-Oubuntu3_all.deb
>>>>>>> gnome-network-admin-2.22.1-Oubuntu1_i386.deb
>>>>>>> Dial-up with jauntyDebs.tar.Izima This is a package consisting of
>>>>>>> wvdial
>>>>>>> with dependencies
>>>>>>>
>>>>>>> Finally agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>
>>>>>>> It was all double click and go with installation of agrmodem.ko and
>>>>>>> agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
>>>>>>>
>>>>>>> It looks like at this point from the terminal sudo agrsm-test would
>>>>>>> have taken me to completion save for entering my name, password and
>>>>>>> phone
>>>>>>> number in ./etc/wvdial.conf. Everything is spelled out as you go
>>>>>>>
>>>>>>> I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
>>>>>>>
>>>>>>> sudo modprobe agrmodem
>>>>>>>
>>>>>>> sudo modprobe agrserial
>>>>>>>
>>>>>>> etc, etc using the page "LSI/AgereSystems 11c11040 chipset support
>>>>>>> installation ,using dkms tools" from the Linmodems discussion board of
>>>>>>> 20DEC2008 as a guide but I got lost trying to find the file wvtest.
>>>>>>> sudo
>>>>>>> agrsm-test rescued me. The modem was found on /dev/ttySAGR. While
>>>>>>> trying
>>>>>>> to configure the network tools point to point connection interface I
>>>>>>> lost
>>>>>>> the connection and it appears the file /dev/ttySAGR was lost but sudo
>>>>>>> agrsm-test brought it right back. I then had to reenter my name,
>>>>>>> phone
>>>>>>> and
>>>>>>> PW but it all went pretty smoothly. My hat is off to you and the
>>>>>>> others
>>>>>>> who
>>>>>>> have been so patient with all this. Thank You
>>>>>>>
>>>>>>> Yours truly, John W
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>
>
>

From forum: Linux Winmodem Support - Discussion

Re: discuss the modem driver

2009-11-26T07:40:34Z

Ashish,

scanModem reports that you have agrsm 11c1:0620 modem

Predictive diagnostics for card in bus 00:09.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Device 0620"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0620
IRQ=11
IDENT=agrsm

For candidate modem in: 00:09.0
0780 Communication controller: Agere Systems Device 0620
Primary device ID: 11c1:0620
Support type needed or chipset: agrsm

This part copied + pasted from a newer scanModem report since yours is
a bit older: scanModem update of: 2009_05_31
--------------------------------------------------------------------------
The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as
of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29
agrsm048pci-2.1.60_20091022_i386.deb or
agrsm048pci-2.1.60_20091022.tar.gz
11c1:0620 2.6.28
agrsm06pci_2.1.80~20090825_i386.deb or
agrsm06pci_2.1.80~20090825_i386.tar.gz
11c11040 (on HDA audio cards) 2.6.27
dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or
agrsm-2.1.80-10mdv2009.0.tar.gz
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
additionally
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see
http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success

All of the above packages are dkms competent. This means that if
your Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.

-------------- end Agere Systems section -------------------

Do download the following deb file:

11c1:0620 2.6.28
agrsm06pci_2.1.80~20090825_i386.deb

Also get wvdial:

The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu Jaunty users, there are at the bottom of
http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci_2.1.80~20090825_i386.deb

run
$ sudo dkpg agrsm*

and follow the instructions provided.

Regards,

Antonio

On 11/26/09, ashish badala <ashish.badala@...> wrote:
>
>

From forum: Linux Winmodem Support - Discussion

discuss the modem driver

2009-11-26T07:13:19Z

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
scanModem update of: 2009_05_31

The dialer utility package WVDIAL does not appear to be installed on your System.
Please read Modem/DOCs/wvdial.txt

There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:09.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:09.0 11c1:0620 11c1:0620 Communication controller: Agere Systems Device 0620

Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:09.0 ----
[ 0.521927] pci 0000:00:09.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.521978] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.521984] pci 0000:00:09.0: PME# disabled

The PCI slot 00:09.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:09.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Device 0620"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0620
IRQ=11
IDENT=agrsm

For candidate modem in: 00:09.0
0780 Communication controller: Agere Systems Device 0620
Primary device ID: 11c1:0620
Support type needed or chipset: agrsm

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm driver pair.
One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
The initial agrsm_howto.txt compiling steps are only cogent to modems with PCI IDs:
11c1:0620, 11c1:048c and 11c1:048f chips.
They use the agrsm-20090418.tar.gz package.
The agrsm-tools sets a useful symbolic link and a agrsm-test utlity

For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition Audio cards, there may be support
through the agrsm resources (providing an agrmodem + agrserial driver pair) as an alternative to usage
of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem chip, ONLY the agrsm code is competent.
Your Linux distro's dkms package should be first installed, as it directs the installation of modem
specific dkms-agrsm resources, and also directs auto-installation of new drivers upon kernel upgrades.

Currently, the dkms-agrsm code is NOT competent for 2.26.28 and later kernels.
A short term fix is to install linux-image + linux-headers packages for earlier kernels.
For example, for Ubuntu Jaunty with 2.6.28 kernels, linux-image + linux-headers packages
for earlier 2.26.27 series Intrepid kernels can be installed. Search for them at:
http://packages.ubuntu.com

The primary dkms-agrsm resource site is http://linux.zsolttech.com/linmodem/agrsm/
whereat a few different packaging types are available. Debian type installers (supporting Ubuntu too)
are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ . Thereat the current package
is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted on High Definition Audio cards.
Read the Modem/DOCs/Agrsm.txt for details.

-------------- end Agere Systems section -------------------

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-11-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: FrankMartin, UnitedKingdom kernel 2.6.31-15-generic

2009-11-26T06:05:07Z

Jacques, Marvin,

Thanks for your advice. All seems to be working OK now. Will buy a
license for normal speed operation.

Jacques, I haven't detected any usb-related problems YET ....

Frank

Jacques Goldberg wrote:

> Marv,
>
>
> You missed what Frank eaxctly asked:
>
> Please watch these two lines at the location which I flagged:
>
> hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>
> hsfmodem-7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> ^
> scanModem and your mail to which I respond now say 02.02
> while on the Linuxant Web site there is 02.05 and there is no 02.02
>
> That's ALL there is in this thread.
> "Cut and paste" from ModemData.txt won't just find the file ...
>
> Jacques
> Marvin Stodolsky wrote:
>
>> Frank
>>
>>
>> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>> download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>> Under Linux unpack with:
>> $ unzip hsfmodem*.zip
>> Then install with:
>> $ sudo dpkg -i hsfmodem*.deb
>> Subsequently, the modem should be found with
>> $ sudo wvdialconf /etc/wvdial.conf
>> Edit in your personal information with:
>> $ sudo gedit /etc/wvdial.conf
>> and try dialing out with:
>> $ sudo wvdial.
>> See DOCs/Testing.txt & Conexant.txt for details.
>>
>> MarvS
>>
>>
>>
>> On Wed, Nov 25, 2009 at 2:42 PM, Frank Martin <frank@...>
>> wrote:
>>
>>> I've recently installed Ubuntu karmic (9.10) on a Dell Latitude X1 to be
>>> used as a "netbook". Windows has gone. Wireless works fine but I
>>> want to
>>> get the modem working because an occasional location I use is dial-up
>>> only.
>>> I've installed wvdial using the synaptic pkg manager and run
>>> scanModem, see
>>> ModemData.txt attached. It suggests downloading
>>> hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>>> but the website contains
>>> hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>>> Please advise. I am new to linux but used unix in the '80s. Thanks.
>>>
>>> Only plain text email is forwarded by the Discuss@... List
>>> Server,
>>> as HTML can contain viruses. Use as the email Subject Line:
>>> YourName, YourCountry kernel 2.6.31-15-generic
>>> With this Subject Line cogent experts will be alerted, and useful case
>>> names left in the Archive.
>>> YourCountry will enable Country specific guidance. Linux experts in
>>> YourCountry
>>> can be found through: http://www.linux.org/groups/index.html.
>>> They will know your Country's modem code, which may be essential for
>>> dialup
>>> service.
>>> Responses from Discuss@... are sometimes blocked by an
>>> Internet
>>> Provider mail filters.
>>> So in a day, also check the Archived responses at
>>> http://www.linmodems.org
>>> -------------------------- System information
>>> ----------------------------
>>> CPU=i686,
>>> Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1
>>> (Ubuntu
>>> 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009
>>> scanModem update of: 2009_11_14
>>>
>>>
>>> Presently install your Linux Distributions dkms package. It provides for
>>> automated driver updates,
>>> following upgrade of your kernel. For details see
>>> http://linux.dell.com/projects.shtml#dkms
>>>
>>> There are no blacklisted modem drivers in /etc/modprobe* files
>>>
>>> Potentially useful modem drivers now loaded are:
>>>
>>>
>>> Attached USB devices are:
>>> ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth
>>> ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
>>> If a cellphone is not detected, see
>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>> A sample report is:
>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>
>>> If a USB modem or cellphone is attached and was not detected, please
>>> provide available information in your request to discuss@...
>>>
>>> For candidate card in slot 00:1e.3, firmware information and bootup
>>> diagnostics are:
>>> PCI slot PCI ID SubsystemID Name
>>> ---------- --------- --------- --------------
>>> 00:1e.3 8086:266d 14f1:5423 Modem: Intel Corporation
>>> 82801FB/FBM/FR/FW/FRW
>>>
>>> Modem interrupt assignment and sharing:
>>> 17: 31423 IO-APIC-fasteoi uhci_hcd:usb3, ipw2200, mmc0
>>> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
>>> [ 0.142940] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
>>> [ 0.142951] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
>>> [ 0.143011] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>>> [ 0.143018] pci 0000:00:1e.3: PME# disabled
>>> [ 1.072333] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low)
>>> -> IRQ
>>> 17
>>> [ 1.072342] serial 0000:00:1e.3: PCI INT B disabled
>>> [ 366.881661] pci 0000:00:1e.3: PME# disabled
>>>
>>> The PCI slot 00:1e.3 of the modem card may be disabled early in
>>> a bootup process, but then enabled later. If modem drivers load
>>> but the modem is not responsive, read DOCs/Bootup.txt about possible
>>> fixes.
>>> Send dmesg.txt along with ModemData.txt to discuss@...
>>> if help is needed.
>>>
>>>
>>>
>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>>> The ALSA packages provide audio support and also drivers for some
>>> modems.
>>> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>>>
>>> The ALSA verion is 1.0.20
>>> The modem cards detected by "aplay -l" are: None
>>>
>>>
>>> The /proc/asound/pcm file reports:
>>> -----------------------
>>> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>>> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
>>> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
>>> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
>>> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
>>>
>>> about /proc/asound/cards:
>>> ------------------------
>>> 0 [ICH6 ]: ICH4 - Intel ICH6
>>> Intel ICH6 with STAC9752,53 at irq 16
>>> === Finished firmware and bootup diagnostics, next deducing cogent
>>> software.
>>> ===
>>>
>>> Predictive diagnostics for card in bus 00:1e.3:
>>> Modem chipset detected on
>>> NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
>>> CLASS=0703
>>> PCIDEV=8086:266d
>>> SUBSYS=14f1:5423
>>> IRQ=17
>>> SOFT=8086:266d.MC97
>>> CodecArchived=CXT
>>> CodecClass=CXT
>>> IDENT=hsfmodem
>>> Driver=hsfmodem-drivers
>>>
>>> For candidate modem in: 00:1e.3
>>> 0703 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
>>> Primary device ID: 8086:266d
>>> Subsystem PCI_id 14f1:5423
>>> Softmodem codec or chipset from diagnostics:
>>> from Archives: CXT, a Conexant type
>>> using
>>> hsfmodem software.
>>> CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
>>> software support.
>>>
>>>
>>> Support type needed or chipset: hsfmodem
>>>
>>>
>>> Writing DOCs/Intel.txt
>>>
>>> For owners of a Dell PCs with Conexant HSF modems, a driver source
>>> package
>>> with full speed enabled is available, but requires driver compiling.
>>> Read
>>> DOCs/Conexant.txt
>>>
>>> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>>> download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>>> Under Linux unpack with:
>>> $ unzip hsfmodem*.zip
>>> Then install with:
>>> $ sudo dpkg -i hsfmodem*.deb
>>> Subsequently, the modem should be found with
>>> $ sudo wvdialconf /etc/wvdial.conf
>>> Edit in your personal information with:
>>> $ sudo gedit /etc/wvdial.conf
>>> and try dialing out with:
>>> $ sudo wvdial.
>>> See DOCs/Testing.txt for details.
>>>
>>> The directions following below need only be pursued, if the above
>>> procedures are not adequate.
>>>
>>> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
>>> find
>>> the
>>> hsfmodem package matching your System. For several Linux distros,
>>> there are
>>> precompiled drivers matched to specific kernels. These have within the
>>> FileName,
>>> your KernelVersion: 2.6.31_15_generic
>>> They can be found through
>>> http://www.linuxant.com/drivers/hsf/full/downloads.php
>>> A more precise location may be given a few paragraphs below.
>>> If an EXACT Match with your your KernelVersion is not found, one of the
>>> "Generic packages with source" near the bottom of the page must be used.
>>> Downloaded packages must be moved into the Linux partition (home
>>> folder is
>>> OK)
>>> and unzipped with:
>>> unzip hsf*.zip
>>> The installation command for a .deb suffic packages is, with root/adm
>>> permission:
>>> sudo dpkg -i hsf*.deb
>>> while for .rpm suffix it is, with:
>>> rpm -i hsf*.rpm
>>> Read DOCs/Conexant.txt
>>>
>>> Writing DOCs/Conexant.txt
>>>
>>>
>>> Completed candidate modem analyses.
>>>
>>> The base of the UDEV device file system is: /dev/.udev
>>>
>>> Versions adequately match for the compiler installed: 4.4.1
>>> and the compiler used in kernel assembly: 4.4.1
>>>
>>> The patch utility is needed and is needed for compiling ALSA
>>> drivers, and
>>> possibly others.
>>>
>>>
>>> Minimal compiling resources appear complete:
>>> make utility - /usr/bin/make
>>> Compiler version 4.4
>>> linuc_headers base folder /lib/modules/2.6.31-15-generic/build
>>>
>>> However some compilations and executable functions may need additional
>>> files,
>>> in the FileNames.h (so called kernel "h"eaders) collection installed in
>>> /usr/include/ .
>>> For martian_modem, additional required packages are needed. The also
>>> required headers of package libc6 are commonly installed by default.
>>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
>>> packages, for kernels 2.6.24 and later versions.
>>> In not included on your install CD, search for them at
>>> http://packages.ubuntu.com
>>> or comparable Repository for other Linux distros.
>>> When compiling ALSA drivers, the utility "patch" will also be needed.
>>>
>>>
>>>
>>>
>>> If a driver compilation fails, with message including some lack of some
>>> FileName.h (stdio.h for example), then
>>> Some additional kernel-header files need installation to
>>> /usr/include. The
>>> minimal additional packages are libc6-dev
>>> and any of its dependents, under Ubuntu linux-libc-dev
>>>
>>> If an alternate ethernet connection is available,
>>> $ apt-get update
>>> $ apt-get -s install linux-kernel-devel
>>> will install needed packages.
>>> For Debian/Ubuntu related distributions, run the following command to
>>> display the needed package list:
>>>
>>> Otherwise packages have to be found through http://packages.ubuntu.com
>>> Once downloaded and transferred into a Linux partition,
>>> they can be installed alltogether with:
>>> $ sudo dpkg -i *.deb
>>>
>>>
>>> Checking pppd properties:
>>> -rwsr-xr-- 1 root dip 277352 2009-02-20 17:25 /usr/sbin/pppd
>>>
>>> In case of an "error 17" "serial loopback" problem, see:
>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>>
>>> To enable dialout without Root permission do:
>>> $ su - root (not for Ubuntu)
>>> sudo chmod a+x /usr/sbin/pppd
>>> or under Ubuntu related Linuxes
>>> sudo chmod a+x /usr/sbin/pppd
>>>
>>> Checking settings of: /etc/ppp/options
>>> asyncmap 0
>>> noauth
>>> crtscts
>>> lock
>>> hide-password
>>> modem
>>> proxyarp
>>> lcp-echo-interval 30
>>> lcp-echo-failure 4
>>> noipx
>>>
>>> In case of a message like:
>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>>
>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
>>> Which can interfere with Browser naviagation.
>>>
>>> Don't worry about the following, it is for experts should trouble
>>> shooting
>>> be necessary.
>>> ==========================================================
>>>
>>> Checking for modem support lines:
>>> --------------------------------------
>>> /device/modem symbolic link:
>>> slmodemd created symbolic link /dev/ttySL0:
>>> Within /etc/udev/ files:
>>>
>>> Within /etc/modprobe.conf files:
>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>>> order to
>>> blacklist unwanted modem drivers
>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>>> Within any ancient /etc/devfs files:
>>>
>>> Within ancient kernel 2.4.n /etc/module.conf files:
>>>
>>> --------- end modem support lines --------
>>>
>>>
>>>
>>>
>
>

From forum: Linux Winmodem Support - Discussion

Re: утиль scanModem

2009-11-26T05:51:51Z

Mikhail,

scanModem reports that you need hsfmodem drivers, which I do not think
exist for your ASP kernel :(, you might definitely need to compile to
try out

Predictive diagnostics for card in bus 002:
Modem chipset detected on
SLOT="Bus 002 Device 002:"
NAME="Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP"
bus=002
USBmodemID=0572:1300
IDENT=hsfmodem
Driver=hsfmodem

For a detailed USB cellphone usage report, see
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
For candidate modem in: 002
Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP
Primary device ID: 0572:1300
Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides
compiling support

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.26.3_29.0.140asp.i686
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.

This is the part that you will need to apply:
--------------------------------------------------------------------------------------------
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Regards,

Antonio

On 11/26/09, Mikhail N.Kozak <mnk111@...> wrote:

> Здравствуйте, Discuss.
>
>
>> В итоге scanModem создаст несколько файлов с нужной информацией, в
>> которых придется разобраться. Если не получится, вышлите файл
>> ModemData.txt нам (eng). Постараемся помочь
>
> Увы, самому разобраться не удалось :( Надеюсь на Вашу помощь.
> Единственно понял, что модем на чипе Conexant и надо что-то
> делать с ядром, кроме установки драйвера (я с Линуксом пока на <<Вы>>)
>
> --
> С уважением,
> Mikhail mailto:mnk111@...

From forum: Linux Winmodem Support - Discussion

Re: RonL, USA kernel 2.6.31-14-generic

2009-11-26T05:47:29Z

Ronald,

scanModem reports that you have an agrsm modem with chipset 11c1:0630 modem.

-------------------------------------------------------------------------
Predictive diagnostics for card in bus 04:00.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Device 0630 "
CLASS=0780
PCIDEV=11c1:0630
SUBSYS=11c1:0630
IRQ=7
IDENT=agrsm

For candidate modem in: 04:00.0
0780 Communication controller: Agere Systems Device 0630
Primary device ID: 11c1:0630
Support type needed or chipset: agrsm

There is no agrsm software support for x86_64 systems, through the
modem may be
supported on Intel/i386 installations, which do more slowly servce
x86_64 processors.

The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as
of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29
agrsm048pci-2.1.60_20091022_i386.deb or
agrsm048pci-2.1.60_20091022.tar.gz
11c1:0620 2.6.28
agrsm06pci_2.1.80~20090825_i386.deb or
agrsm06pci_2.1.80~20090825_i386.tar.gz
11c11040 (on HDA audio cards) 2.6.27
dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or
agrsm-2.1.80-10mdv2009.0.tar.gz
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
additionally
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see
http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success

All of the above packages are dkms competent. This means that if
your Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.

-------------- end Agere Systems section -------------------

I have tried several drivers for this particular modem and I have
found that the following driver:

11c1:0620 2.6.28
agrsm06pci_2.1.80~20090825_i386.deb or
agrsm06pci_2.1.80~20090825_i386.tar.gz

the one for 11c1:0620 which I have made to work under 2.6.27.27 Slax
kernel and I had previously tried multiple times and several others
reported success.

For your kernel and CPU it will not work since it is 64 Bit :(

CPU=x86_64,
Linux version 2.6.31-14-generic

There is no agrsm software support for x86_64 systems, through the
modem may be supported on Intel/i386 installations, which do more
slowly servce x86_64 processors.

This is the bad part :(. If you install a non 64 bit OS, then you
might have a chance with a previous 2.6.27/28 based kernel, but not
with 2.6.31 at this time :(

If you decide to reinstall but in 32 bit mode only, try to install wvdial :

The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu Jaunty users, there are at the bottom of
http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

You can try Slax Live CD for which I built a module(Slax's package
built for Slax), for the 11c1:0620 which might work for your modem
(11c1:0630), if you wish to give that a try before reinstalling let me
know and I'll email you the module and then you may let us know if it
works or not.

Regards,

Antonio

On 11/25/09, Ronald Liebman <ronald.liebman@...> wrote:
> Please help me interpret the attached diagnostics. This is a dual-boot
> machine, and Win7 sees a softmodem.
>
> Thanks.
>

From forum: Linux Winmodem Support - Discussion

утиль scanModem

2009-11-25T22:37:43Z

Здравствуйте, Discuss.

> В итоге scanModem создаст несколько файлов с нужной информацией, в
> которых придется разобраться. Если не получится, вышлите файл
> ModemData.txt нам (eng). Постараемся помочь

Увы, самому разобраться не удалось :( Надеюсь на Вашу помощь.
Единственно понял, что модем на чипе Conexant и надо что-то
делать с ядром, кроме установки драйвера (я с Линуксом пока на «Вы»)

--
С уважением,
Mikhail mailto:mnk111@...
Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry ASPLinux release 14 (Cobalt)
Kernel kernel 2.6.26.3-29.0.140asp.i686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, ASPLinux release 14 (Cobalt)
Kernel
Linux version 2.6.26.3-29.0.140asp.i686 (mockbuild@...) (gcc version 4.3.0 20080428 (ASPLinux 4.3.0-8) (GCC) ) #1 SMP Mon Sep 15 07:08:05 EDT 2008
scanModem update of: 2009_11_14

Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
snd_hda_intel

Attached USB devices are:
ID 0951:1600 Kingston Technology Data Traveler II Pen Drive
ID eb1a:e323 eMPIA Technology, Inc.
ID 0e6a:6001 Megawin Technology Co., Ltd
ID 09da:032b A4 Tech Co., Ltd
ID 0572:1300 Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1462:7592 Audio device: Intel Corporation 82801G

Modem interrupt assignment and sharing:
16: 29 28 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf9ffc000 irq 16

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.26.3-29.0.140asp.i686/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 002:
Modem chipset detected on
SLOT="Bus 002 Device 002:"
NAME="Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP"
bus=002
USBmodemID=0572:1300
IDENT=hsfmodem
Driver=hsfmodem

For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
For candidate modem in: 002
Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP
Primary device ID: 0572:1300
Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.26.3_29.0.140asp.i686
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1462:7592
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA

High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
wvdialconf /etc/wvdial.conf

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 1462:7592
Softmodem codec or chipset from diagnostics:
from Archives:

Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.3.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.3.0
and the compiler used in kernel assembly: 4.3.0

linux-headers-2.6.26.3-29.0.140asp.i686 resources needed for compiling are not manifestly ready!

If compiling is necessary packages must be installed, providing:
kernel-source-2.6.26.3-29.0.140asp.i686

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-r-xr-xr-x 1 root root 318024 ÐÑÐ½ 13 2008 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
lock

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", GROUP="uucp"
Within /etc/modprobe.conf files:

Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: FrankMartin, UnitedKingdom kernel 2.6.31-15-generic

2009-11-25T22:30:37Z

Marv,

You missed what Frank eaxctly asked:

Please watch these two lines at the location which I flagged:

hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip

hsfmodem-7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
^
scanModem and your mail to which I respond now say 02.02
while on the Linuxant Web site there is 02.05 and there is no 02.02

That's ALL there is in this thread.
"Cut and paste" from ModemData.txt won't just find the file ...

Jacques

Marvin Stodolsky wrote:

> Frank
>
>
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt & Conexant.txt for details.
>
> MarvS
>
>
>
> On Wed, Nov 25, 2009 at 2:42 PM, Frank Martin <frank@...> wrote:
>
>> I've recently installed Ubuntu karmic (9.10) on a Dell Latitude X1 to be
>> used as a "netbook". Windows has gone. Wireless works fine but I want to
>> get the modem working because an occasional location I use is dial-up only.
>> I've installed wvdial using the synaptic pkg manager and run scanModem, see
>> ModemData.txt attached. It suggests downloading
>> hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>> but the website contains
>> hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>> Please advise. I am new to linux but used unix in the '80s. Thanks.
>>
>> Only plain text email is forwarded by the Discuss@... List
>> Server,
>> as HTML can contain viruses. Use as the email Subject Line:
>> YourName, YourCountry kernel 2.6.31-15-generic
>> With this Subject Line cogent experts will be alerted, and useful case
>> names left in the Archive.
>> YourCountry will enable Country specific guidance. Linux experts in
>> YourCountry
>> can be found through: http://www.linux.org/groups/index.html.
>> They will know your Country's modem code, which may be essential for dialup
>> service.
>> Responses from Discuss@... are sometimes blocked by an Internet
>> Provider mail filters.
>> So in a day, also check the Archived responses at http://www.linmodems.org
>> -------------------------- System information ----------------------------
>> CPU=i686,
>> Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu
>> 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009
>> scanModem update of: 2009_11_14
>>
>>
>> Presently install your Linux Distributions dkms package. It provides for
>> automated driver updates,
>> following upgrade of your kernel. For details see
>> http://linux.dell.com/projects.shtml#dkms
>>
>> There are no blacklisted modem drivers in /etc/modprobe* files
>>
>> Potentially useful modem drivers now loaded are:
>>
>>
>> Attached USB devices are:
>> ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth
>> ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
>> If a cellphone is not detected, see
>> http://ubuntuforums.org/archive/index.php/t-878554.html
>> A sample report is:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>
>> If a USB modem or cellphone is attached and was not detected, please
>> provide available information in your request to discuss@...
>>
>> For candidate card in slot 00:1e.3, firmware information and bootup
>> diagnostics are:
>> PCI slot PCI ID SubsystemID Name
>> ---------- --------- --------- --------------
>> 00:1e.3 8086:266d 14f1:5423 Modem: Intel Corporation
>> 82801FB/FBM/FR/FW/FRW
>>
>> Modem interrupt assignment and sharing:
>> 17: 31423 IO-APIC-fasteoi uhci_hcd:usb3, ipw2200, mmc0
>> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
>> [ 0.142940] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
>> [ 0.142951] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
>> [ 0.143011] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>> [ 0.143018] pci 0000:00:1e.3: PME# disabled
>> [ 1.072333] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ
>> 17
>> [ 1.072342] serial 0000:00:1e.3: PCI INT B disabled
>> [ 366.881661] pci 0000:00:1e.3: PME# disabled
>>
>> The PCI slot 00:1e.3 of the modem card may be disabled early in
>> a bootup process, but then enabled later. If modem drivers load
>> but the modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>> Send dmesg.txt along with ModemData.txt to discuss@...
>> if help is needed.
>>
>>
>>
>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>> The ALSA packages provide audio support and also drivers for some modems.
>> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>>
>> The ALSA verion is 1.0.20
>> The modem cards detected by "aplay -l" are: None
>>
>>
>> The /proc/asound/pcm file reports:
>> -----------------------
>> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
>> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
>> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
>> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
>>
>> about /proc/asound/cards:
>> ------------------------
>> 0 [ICH6 ]: ICH4 - Intel ICH6
>> Intel ICH6 with STAC9752,53 at irq 16
>> === Finished firmware and bootup diagnostics, next deducing cogent software.
>> ===
>>
>> Predictive diagnostics for card in bus 00:1e.3:
>> Modem chipset detected on
>> NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
>> CLASS=0703
>> PCIDEV=8086:266d
>> SUBSYS=14f1:5423
>> IRQ=17
>> SOFT=8086:266d.MC97
>> CodecArchived=CXT
>> CodecClass=CXT
>> IDENT=hsfmodem
>> Driver=hsfmodem-drivers
>>
>> For candidate modem in: 00:1e.3
>> 0703 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
>> Primary device ID: 8086:266d
>> Subsystem PCI_id 14f1:5423
>> Softmodem codec or chipset from diagnostics:
>> from Archives: CXT, a Conexant type using
>> hsfmodem software.
>> CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
>> software support.
>>
>>
>> Support type needed or chipset: hsfmodem
>>
>>
>> Writing DOCs/Intel.txt
>>
>> For owners of a Dell PCs with Conexant HSF modems, a driver source package
>> with full speed enabled is available, but requires driver compiling. Read
>> DOCs/Conexant.txt
>>
>> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>> download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
>> Under Linux unpack with:
>> $ unzip hsfmodem*.zip
>> Then install with:
>> $ sudo dpkg -i hsfmodem*.deb
>> Subsequently, the modem should be found with
>> $ sudo wvdialconf /etc/wvdial.conf
>> Edit in your personal information with:
>> $ sudo gedit /etc/wvdial.conf
>> and try dialing out with:
>> $ sudo wvdial.
>> See DOCs/Testing.txt for details.
>>
>> The directions following below need only be pursued, if the above
>> procedures are not adequate.
>>
>> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find
>> the
>> hsfmodem package matching your System. For several Linux distros, there are
>> precompiled drivers matched to specific kernels. These have within the
>> FileName,
>> your KernelVersion: 2.6.31_15_generic
>> They can be found through
>> http://www.linuxant.com/drivers/hsf/full/downloads.php
>> A more precise location may be given a few paragraphs below.
>> If an EXACT Match with your your KernelVersion is not found, one of the
>> "Generic packages with source" near the bottom of the page must be used.
>> Downloaded packages must be moved into the Linux partition (home folder is
>> OK)
>> and unzipped with:
>> unzip hsf*.zip
>> The installation command for a .deb suffic packages is, with root/adm
>> permission:
>> sudo dpkg -i hsf*.deb
>> while for .rpm suffix it is, with:
>> rpm -i hsf*.rpm
>> Read DOCs/Conexant.txt
>>
>> Writing DOCs/Conexant.txt
>>
>>
>> Completed candidate modem analyses.
>>
>> The base of the UDEV device file system is: /dev/.udev
>>
>> Versions adequately match for the compiler installed: 4.4.1
>> and the compiler used in kernel assembly: 4.4.1
>>
>> The patch utility is needed and is needed for compiling ALSA drivers, and
>> possibly others.
>>
>>
>> Minimal compiling resources appear complete:
>> make utility - /usr/bin/make
>> Compiler version 4.4
>> linuc_headers base folder /lib/modules/2.6.31-15-generic/build
>>
>> However some compilations and executable functions may need additional
>> files,
>> in the FileNames.h (so called kernel "h"eaders) collection installed in
>> /usr/include/ .
>> For martian_modem, additional required packages are needed. The also
>> required headers of package libc6 are commonly installed by default.
>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
>> packages, for kernels 2.6.24 and later versions.
>> In not included on your install CD, search for them at
>> http://packages.ubuntu.com
>> or comparable Repository for other Linux distros.
>> When compiling ALSA drivers, the utility "patch" will also be needed.
>>
>>
>>
>>
>> If a driver compilation fails, with message including some lack of some
>> FileName.h (stdio.h for example), then
>> Some additional kernel-header files need installation to /usr/include. The
>> minimal additional packages are libc6-dev
>> and any of its dependents, under Ubuntu linux-libc-dev
>>
>> If an alternate ethernet connection is available,
>> $ apt-get update
>> $ apt-get -s install linux-kernel-devel
>> will install needed packages.
>> For Debian/Ubuntu related distributions, run the following command to
>> display the needed package list:
>>
>> Otherwise packages have to be found through http://packages.ubuntu.com
>> Once downloaded and transferred into a Linux partition,
>> they can be installed alltogether with:
>> $ sudo dpkg -i *.deb
>>
>>
>> Checking pppd properties:
>> -rwsr-xr-- 1 root dip 277352 2009-02-20 17:25 /usr/sbin/pppd
>>
>> In case of an "error 17" "serial loopback" problem, see:
>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>
>> To enable dialout without Root permission do:
>> $ su - root (not for Ubuntu)
>> sudo chmod a+x /usr/sbin/pppd
>> or under Ubuntu related Linuxes
>> sudo chmod a+x /usr/sbin/pppd
>>
>> Checking settings of: /etc/ppp/options
>> asyncmap 0
>> noauth
>> crtscts
>> lock
>> hide-password
>> modem
>> proxyarp
>> lcp-echo-interval 30
>> lcp-echo-failure 4
>> noipx
>>
>> In case of a message like:
>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>
>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
>> Which can interfere with Browser naviagation.
>>
>> Don't worry about the following, it is for experts should trouble shooting
>> be necessary.
>> ==========================================================
>>
>> Checking for modem support lines:
>> --------------------------------------
>> /device/modem symbolic link:
>> slmodemd created symbolic link /dev/ttySL0:
>> Within /etc/udev/ files:
>>
>> Within /etc/modprobe.conf files:
>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
>> blacklist unwanted modem drivers
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>> Within any ancient /etc/devfs files:
>>
>> Within ancient kernel 2.4.n /etc/module.conf files:
>>
>> --------- end modem support lines --------
>>
>>
>>
>>

From forum: Linux Winmodem Support - Discussion

RonL, USA kernel 2.6.31-14-generic

2009-11-25T19:44:26Z

Please help me interpret the attached diagnostics. This is a dual-boot
machine, and Win7 sees a softmodem.

Thanks.

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64,
Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009
scanModem update of: 2009_11_14

The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

The dkms driver upgrade utilities are installed,

Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
snd_hda_intel

Attached USB devices are:
ID 066f:2010 SigmaTel, Inc.
ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 04:00.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:00.0 11c1:0630 11c1:0630 Communication controller: Agere Systems Device 0630

Modem interrupt assignment and sharing:
7: 1 0 IO-APIC-edge
--- Bootup diagnostics for card in PCI slot 04:00.0 ----
[ 0.306441] pci 0000:04:00.0: reg 10 64bit mmio: [0xfd9ff000-0xfd9fffff]
[ 0.306477] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.306481] pci 0000:04:00.0: PME# disabled

The PCI slot 04:00.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 10de:03f0 103c:2a6c Audio device: nVidia Corporation MCP61 High Definition Audio

Modem interrupt assignment and sharing:
23: 9 5559 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
[ 0.305918] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
[ 0.305942] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.305944] pci 0000:00:05.0: PME# disabled
[ 28.115577] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 28.115602] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 29.750091] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5

The PCI slot 00:05.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1
00-02: ALC888 Analog : ALC888 Analog : capture 1

about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe024000 irq 23

PCI slot 00:05.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 04:00.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Device 0630 "
CLASS=0780
PCIDEV=11c1:0630
SUBSYS=11c1:0630
IRQ=7
IDENT=agrsm

For candidate modem in: 04:00.0
0780 Communication controller: Agere Systems Device 0630
Primary device ID: 11c1:0630
Support type needed or chipset: agrsm

There is no agrsm software support for x86_64 systems, through the modem may be
supported on Intel/i386 installations, which do more slowly servce x86_64 processors.

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or agrsm048pci-2.1.60_20091022.tar.gz
11c1:0620 2.6.28 agrsm06pci_2.1.80~20090825_i386.deb or agrsm06pci_2.1.80~20090825_i386.tar.gz
11c11040 (on HDA audio cards) 2.6.27 dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or agrsm-2.1.80-10mdv2009.0.tar.gz
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat additionally
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success

All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------

Predictive diagnostics for card in bus 00:05.0:
Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=103c:2a6c
IRQ=23
HDA=10de:03f0
SOFT=10de:03f0.HDA

High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 10de:03f0.
If another modem card is present, then most likely 10de:03f0 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf

For candidate modem in: 00:05.0
0403 Audio device: nVidia Corporation MCP61 High Definition Audio
Primary device ID: 10de:03f0
Subsystem PCI_id 103c:2a6c
Softmodem codec or chipset from diagnostics:
from Archives:

Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Antonio, USA 2.6.31.5-127.fc12.i686.PAE

2009-11-25T18:53:51Z

Dear fellow LinModems members,

This is a success report for Agere Modem supported by martian modem
drivers martian-full-20080625.tar.gz under 2.6.31.5-127.fc12.i686.PAE
fedora kernel. The only strange thing that appears is a message from
dmesg:

This one: IRQF_DISABLED is not guaranteed on shared IRQs

I wonder what that means, but I have a working connection, I will
probably try later, pctel and intel 536 modems as soon as I can get
the other machine going. The machine with the above modems does not
turn on only beeps :(

martian loaded - 20080620
martian 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
IRQ 19/164x: IRQF_DISABLED is not guaranteed on shared IRQs
martian: added device 11c1:44e BaseAddress = 0xcc00, CommAddres =
0xc800, irq = 19
martian: smp ioctls are obsolete
martian_modem is attached.

Regards,
Hope all the best for a nice holiday :)
Happy Thanksgiving to all!

Antonio

ModemData.txt follows

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31.5-127.fc12.i686.PAE
With this Subject Line cogent experts will be alerted, and useful
case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@... are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31.5-127.fc12.i686.PAE
(mockbuild@...) (gcc version 4.4.2 20091027
(Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009
scanModem update of: 2009_11_14

Presently install your Linux Distributions dkms package. It provides
for automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
martian_dev

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:0b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0b.0 11c1:044e 11c1:044c Communication
controller: Agere Systems LT WinModem

Modem interrupt assignment and sharing:
19: 0 0 IO-APIC-fasteoi 164x, eth0
--- Bootup diagnostics for card in PCI slot 00:0b.0 ----
pci 0000:00:0b.0: reg 10 32bit mmio: [0xe1105000-0xe11050ff]
pci 0000:00:0b.0: reg 14 io port: [0xc800-0xc807]
pci 0000:00:0b.0: reg 18 io port: [0xcc00-0xccff]
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
martian 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

The PCI slot 00:0b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:0b.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:044e
SUBSYS=11c1:044c
IRQ=19
IDENT=Agere.DSP

For candidate modem in: 00:0b.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:044e
Support type needed or chipset: Agere.DSP

The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal
processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
Always use the most update for kernels after 2.6.20, currently
martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.

See DOCs/AgereDSP.txt for Details.

At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
get the martian-full-20080625.tar.gz and follow Readme-NOW.html
0x044e -- Mars 3 Mercury data fax only
-------------- end Agere Systems section -------------------

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.2
and the compiler used in kernel assembly: 4.4.2

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31.5-127.fc12.i686.PAE/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-r-xr-xr-x. 1 root root 324136 2009-09-16 13:03 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
lock

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:

Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: FrankMartin, UnitedKingdom kernel 2.6.31-15-generic

2009-11-25T14:22:56Z

Frank

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt & Conexant.txt for details.

MarvS

On Wed, Nov 25, 2009 at 2:42 PM, Frank Martin <frank@...> wrote:

> I've recently installed Ubuntu karmic (9.10) on a Dell Latitude X1 to be
> used as a "netbook". Windows has gone. Wireless works fine but I want to
> get the modem working because an occasional location I use is dial-up only.
> I've installed wvdial using the synaptic pkg manager and run scanModem, see
> ModemData.txt attached. It suggests downloading
> hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> but the website contains
> hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> Please advise. I am new to linux but used unix in the '80s. Thanks.
>
> Only plain text email is forwarded by the Discuss@... List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.31-15-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@... are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu
> 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009
> scanModem update of: 2009_11_14
>
>
> Presently install your Linux Distributions dkms package. It provides for
> automated driver updates,
> following upgrade of your kernel. For details see
> http://linux.dell.com/projects.shtml#dkms
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth
> ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@...
>
> For candidate card in slot 00:1e.3, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1e.3 8086:266d 14f1:5423 Modem: Intel Corporation
> 82801FB/FBM/FR/FW/FRW
>
> Modem interrupt assignment and sharing:
> 17: 31423 IO-APIC-fasteoi uhci_hcd:usb3, ipw2200, mmc0
> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
> [ 0.142940] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
> [ 0.142951] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
> [ 0.143011] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
> [ 0.143018] pci 0000:00:1e.3: PME# disabled
> [ 1.072333] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ
> 17
> [ 1.072342] serial 0000:00:1e.3: PCI INT B disabled
> [ 366.881661] pci 0000:00:1e.3: PME# disabled
>
> The PCI slot 00:1e.3 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@...
> if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.20
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [ICH6 ]: ICH4 - Intel ICH6
> Intel ICH6 with STAC9752,53 at irq 16
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 00:1e.3:
> Modem chipset detected on
> NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
> CLASS=0703
> PCIDEV=8086:266d
> SUBSYS=14f1:5423
> IRQ=17
> SOFT=8086:266d.MC97
> CodecArchived=CXT
> CodecClass=CXT
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
>
> For candidate modem in: 00:1e.3
> 0703 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
> Primary device ID: 8086:266d
> Subsystem PCI_id 14f1:5423
> Softmodem codec or chipset from diagnostics:
> from Archives: CXT, a Conexant type using
> hsfmodem software.
> CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
> software support.
>
>
> Support type needed or chipset: hsfmodem
>
>
> Writing DOCs/Intel.txt
>
> For owners of a Dell PCs with Conexant HSF modems, a driver source package
> with full speed enabled is available, but requires driver compiling. Read
> DOCs/Conexant.txt
>
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt for details.
>
> The directions following below need only be pursued, if the above
> procedures are not adequate.
>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find
> the
> hsfmodem package matching your System. For several Linux distros, there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion: 2.6.31_15_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home folder is
> OK)
> and unzipped with:
> unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> Read DOCs/Conexant.txt
>
> Writing DOCs/Conexant.txt
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.4.1
> and the compiler used in kernel assembly: 4.4.1
>
> The patch utility is needed and is needed for compiling ALSA drivers, and
> possibly others.
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.4
> linuc_headers base folder /lib/modules/2.6.31-15-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-20 17:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>

From forum: Linux Winmodem Support - Discussion

Re: FrankMartin, UnitedKingdom kernel 2.6.31-15-generic [ + note for Marv]

2009-11-25T12:48:38Z

Marv: typo in scanModem. 7.80.02.03 should be 7.80.02.05 (checked)

Frank: Take the one on the Web site
hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip

Follow the instructions in ModemData.txt or if you prefer, at the
Linuxant Web site for HSF modems.

My X1 is almost 5 years old now, Windows removed from the beginning,
using the modem as you plan for the same reason, and it's hard to
imagine what else it does for me, all in scientific computing, heavy
simulations, FPGA applications, real time data acquisition. An excellent
tool.

I need the modem infrequently , so I install the modem driver when I
need the modem and remove it after use.

The reason is that (infrequently, even if the modem is not used) it
interferes with the USB subsystem with devices such a mouse, a printer,
the FPGA development board, a National Instruments multifunction DAQ,
and collecting data from the FPGA using its RS-232 interface with an
RS232->USB converter since the X1 comes without RS232 port.

All these extras are connected using an external hub.

So, in brief, if you machine hangs with the modem driver installed but
unused, just uninstall the driver. Do not erase the .deb file after
installation ...

Jacques

Frank Martin wrote:

> I've recently installed Ubuntu karmic (9.10) on a Dell Latitude X1 to
> be used as a "netbook". Windows has gone. Wireless works fine but I
> want to get the modem working because an occasional location I use is
> dial-up only. I've installed wvdial using the synaptic pkg manager
> and run scanModem, see ModemData.txt attached. It suggests downloading
> hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> but the website contains
> hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
> Please advise. I am new to linux but used unix in the '80s. Thanks.

From forum: Linux Winmodem Support - Discussion

FrankMartin, UnitedKingdom kernel 2.6.31-15-generic

2009-11-25T11:42:36Z

I've recently installed Ubuntu karmic (9.10) on a Dell Latitude X1 to be
used as a "netbook". Windows has gone. Wireless works fine but I want
to get the modem working because an occasional location I use is dial-up
only. I've installed wvdial using the synaptic pkg manager and run
scanModem, see ModemData.txt attached. It suggests downloading
hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
but the website contains
hsfmodem_7.80.02.05full_k2.6.31_15_generic_ubuntu_i386.deb.zip
Please advise. I am new to linux but used unix in the '80s. Thanks.

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-15-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009
scanModem update of: 2009_11_14

Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:

Attached USB devices are:
ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth
ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 14f1:5423 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW

Modem interrupt assignment and sharing:
17: 31423 IO-APIC-fasteoi uhci_hcd:usb3, ipw2200, mmc0
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 0.142940] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
[ 0.142951] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
[ 0.143011] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.143018] pci 0000:00:1e.3: PME# disabled
[ 1.072333] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.072342] serial 0000:00:1e.3: PCI INT B disabled
[ 366.881661] pci 0000:00:1e.3: PME# disabled

The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1

about /proc/asound/cards:
------------------------
0 [ICH6 ]: ICH4 - Intel ICH6
Intel ICH6 with STAC9752,53 at irq 16
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1e.3:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0703
PCIDEV=8086:266d
SUBSYS=14f1:5423
IRQ=17
SOFT=8086:266d.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers

For candidate modem in: 00:1e.3
0703 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary device ID: 8086:266d
Subsystem PCI_id 14f1:5423
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.

Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.31_15_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_15_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-15-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 17:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

536EP for Ubuntu Karmic

2009-11-25T10:26:03Z

Hello again,
I seem unable to compile the Intel 536EP driver. I extracted it to /usr/src and ran make as root. Here is my output.

# make 536
cd coredrv; make clean
make[1]: Entering directory `/usr/src/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/usr/src/intel-536-537/coredrv'
rm -f *.o *.ko
Module precompile check
Current running kernel is: 2.6.31-14-generic
/lib/modules... autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
version.h matches running kernel
make[1]: Entering directory `/usr/src/intel-536-537'
2.6.31-14-generic
make[2]: Entering directory `/usr/src/intel-536-537/coredrv'
make -C /lib/modules/2.6.31-14-generic/build SUBDIRS=/usr/src/intel-536-537/core
drv modules
make[3]: Entering directory `/usr/src/linux-headers-2.6.31-14-generic'
CC [M] /usr/src/intel-536-537/coredrv/coredrv.o
CC [M] /usr/src/intel-536-537/coredrv/clmmain.o
CC [M] /usr/src/intel-536-537/coredrv/rts.o
CC [M] /usr/src/intel-536-537/coredrv/task.o
CC [M] /usr/src/intel-536-537/coredrv/uart.o
CC [M] /usr/src/intel-536-537/coredrv/wwh_dflt.o
CC [M] /usr/src/intel-536-537/coredrv/locks.o
CC [M] /usr/src/intel-536-537/coredrv/softserial_io.o
CC [M] /usr/src/intel-536-537/coredrv/softserial_ioctl.o
CC [M] /usr/src/intel-536-537/coredrv/softserial.o
/usr/src/intel-536-537/coredrv/softserial.c: In function ‘softserial_background_event_handler’:
/usr/src/intel-536-537/coredrv/softserial.c:365: error: request for member ‘ops’ in something not a structure or union
/usr/src/intel-536-537/coredrv/softserial.c:374: error: request for member ‘ops’ in something not a structure or union
make[4]: *** [/usr/src/intel-536-537/coredrv/softserial.o] Error 1
make[3]: *** [_module_/usr/src/intel-536-537/coredrv] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-2.6.31-14-generic'
make[2]: *** [536core_26] Error 2
make[2]: Leaving directory `/usr/src/intel-536-537/coredrv'
2.6.31-14-generic
Failed to build driver
make[1]: Leaving directory `/usr/src/intel-536-537'

Stephen Pinker
http://groups.google.com/group/ubuntu-modems?hl=en

From forum: Linux Winmodem Support - Discussion

Re: Phillip Andreason, USA, kernel 2.6.28-15-generic

2009-11-25T07:39:39Z

Philip and/or Kristy,

scanModem reports that your modem is supported through hsfmodem drivers :

For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 104d:818c
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.

Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_15_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

If you download & install the suggested driver and the modem does not
respond, please read the follownig and apply it to see how to proceed:

Modem interrupt assignment and sharing:
9: 59665 XT-PIC-XT acpi, ehci_hcd:usb1,
uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, ipw2200, yenta,
Intel 82801DB-ICH4, radeon@pci:0000:01:00.0, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.433571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.433577] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.433604] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.433608] pci 0000:00:1f.6: PME# disabled
[ 1.473009] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9
(level, low) -> IRQ 9
[ 1.473016] serial 0000:00:1f.6: PCI INT B disabled

The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

Regards,

Antonio

On 11/25/09, Phillip and Kristy Andreason <pkandreason@...> wrote:

> Only plain text email is forwarded by the Discuss@... List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.28-15-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@... are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.28-15-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu
> 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:49:34 UTC 2009
> scanModem update of: 2009_11_14
>
>
> The dkms driver upgrade utilities are installed,
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@...
>
> For candidate card in slot 00:1f.6, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1f.6 8086:24c6 104d:818c Modem: Intel Corporation 82801DB/DBL/DBM
>
> Modem interrupt assignment and sharing:
> 9: 59665 XT-PIC-XT acpi, ehci_hcd:usb1, uhci_hcd:usb2,
> uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, ipw2200, yenta, Intel 82801DB-ICH4,
> radeon@pci:0000:01:00.0, eth0
> --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
> [ 0.433571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
> [ 0.433577] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
> [ 0.433604] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [ 0.433608] pci 0000:00:1f.6: PME# disabled
> [ 1.473009] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level,
> low) -> IRQ 9
> [ 1.473016] serial 0000:00:1f.6: PCI INT B disabled
>
> The PCI slot 00:1f.6 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@...
> if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.18
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
> Intel 82801DB-ICH4 with AD1981B at irq 9
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 00:1f.6:
> Modem chipset detected on
> NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
> CLASS=0703
> PCIDEV=8086:24c6
> SUBSYS=104d:818c
> IRQ=9
> SOFT=8086:24c6.MC97
> CodecArchived=CXT
> CodecClass=CXT
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
>
> For candidate modem in: 00:1f.6
> 0703 Modem: Intel Corporation 82801DB/DBL/DBM
> Primary device ID: 8086:24c6
> Subsystem PCI_id 104d:818c
> Softmodem codec or chipset from diagnostics:
> from Archives: CXT, a Conexant type using
> hsfmodem software.
> CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
> software support.
>
>
> Support type needed or chipset: hsfmodem
>
>
> Writing DOCs/Intel.txt
>
> For owners of a Dell PCs with Conexant HSF modems, a driver source package
> with full speed enabled is available, but requires driver compiling. Read
> DOCs/Conexant.txt
>
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.28_15_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt for details.
>
> The directions following below need only be pursued, if the above
> procedures are not adequate.
>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find
> the
> hsfmodem package matching your System. For several Linux distros, there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion: 2.6.28_15_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home folder is
> OK)
> and unzipped with:
> unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> Read DOCs/Conexant.txt
>
> Writing DOCs/Conexant.txt
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.3.3
> and the compiler used in kernel assembly: 4.3.3
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.3
> linuc_headers base folder /lib/modules/2.6.28-15-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-20 12:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>

From forum: Linux Winmodem Support - Discussion

Phillip Andreason, USA, kernel 2.6.28-15-generic

2009-11-25T07:21:20Z

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-15-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.28-15-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:49:34 UTC 2009
scanModem update of: 2009_11_14

The dkms driver upgrade utilities are installed,

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:

Attached USB devices are:
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 104d:818c Modem: Intel Corporation 82801DB/DBL/DBM

Modem interrupt assignment and sharing:
9: 59665 XT-PIC-XT acpi, ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, ipw2200, yenta, Intel 82801DB-ICH4, radeon@pci:0000:01:00.0, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.433571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.433577] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.433604] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.433608] pci 0000:00:1f.6: PME# disabled
[ 1.473009] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 1.473016] serial 0000:00:1f.6: PCI INT B disabled

The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1

about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with AD1981B at irq 9
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=104d:818c
IRQ=9
SOFT=8086:24c6.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers

For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 104d:818c
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.

Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_15_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.28_15_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-15-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 12:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: Skyspeed Modem ( worked on XP , not in Ubuntu )

2009-11-25T05:54:18Z

Rusli,

Either of
ID 064e:a103 Suyin Corp.
ID 05c6:1000 Qualcomm, Inc.
might represent your USB modem. Please detach your modem, rerun
scanModem, and this assess if one of them disappears from the report.

Separately I'll send you a package to setup the wvdial under Karmic.
This is just a dialer utility, not drivers. But after installation run:
$ sudo wvdialconf

If your USB modem is detected, it is supported by a Linux sub-serial
diriver. THen all should be well.
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If the modem is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
http://www.khattam.info/2009/04/30/configuring-cdma-wireless-modem-in-linux/
More broad, you can search Google to try to get more details on your
particular SkySpeed modem.
The problem is that the CDMAs include types which use Linux drivers,
and others which have not-supp orted winmodem chips.

With respect to your internal
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1025:0135
Softmodem codec or chipset from diagnostics: 0x11c11040
which is hosted on the Subsystem, there is as yet no support
under 2.6.31 kernels,
with last successes under 2.6.27, see below the <<<< line.

The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as
of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29
agrsm048pci-2.1.60_20091022_i386.deb or
agrsm048pci-2.1.60_20091022.tar.gz
11c1:0620 2.6.28
agrsm06pci_2.1.80~20090825_i386.deb or
agrsm06pci_2.1.80~20090825_i386.tar.gz
11c11040 (on HDA audio cards) 2.6.27
dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or
agrsm-2.1.80-10mdv2009.0.tar.gz <<<<
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
additionally
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success.

MarvS
scanModem maintainer

On Tue, Nov 24, 2009 at 10:12 PM, rusli <ruslimarah@...> wrote:

> I use USB modem ( CDMA ) , Brand : Skyspeed CDMA 1x , MC 101, worked
> properly in XP with driver.
> I cannot connect to Internet with the modem in Ubuntu 9.10.
> My laptop : Acer Aspire 2920
> My kernel :
> $ uname -a
> Linux rusli-acer 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC
> 2009 i686 GNU/Linux
>
> I use Ubuntu Karmic Koala 9.10
>
> I send this log ( *ModemData.txt *) , I hope you can help me
> Sorry for my english, i'm an asian.
> Thx for your attention and help.
>
>
>
> regards,
>
>
> Rusli
>
>
>
> Only plain text email is forwarded by the Discuss@... List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.31-14-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@... are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu
> 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
> scanModem update of: 2009_11_14
>
>
> The dkms driver upgrade utilities are installed,
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
> snd_hda_intel
>
> Attached USB devices are:
> ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
> ID 064e:a103 Suyin Corp.
> ID 05c6:1000 Qualcomm, Inc.
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@...
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1b.0 8086:284b 1025:0135 Audio device: Intel
> Corporation 82801H
>
> Modem interrupt assignment and sharing:
> 22: 1108 1037 IO-APIC-fasteoi HDA Intel
> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [ 0.222107] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff]
> [ 0.222177] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.222182] pci 0000:00:1b.0: PME# disabled
> [ 22.633536] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> [ 22.633574] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 23.243540] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:1b.0/input/input8
>
> The PCI slot 00:1b.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@...
> if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.20
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xfc200000 irq 22
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.20
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xfc200000 irq 22
>
> PCI slot 00:1b.0 has a High Definition Audio Card
> The drivers are in the kernel modules tree at:
> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.28-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.27-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> The modem codec file for the HDA card is: /proc/asound/card0/codec#1
> --------------------------------------------------------
> Codec: LSI ID 1040
> Address: 1
> Function Id: 0x2
> Vendor Id: 0x11c11040
> Subsystem Id: 0x10250100
> Revision Id: 0x100200
> Modem Function Group: 0x1
>
> The audio card hosts a softmodem chip: 0x11c11040
> If not a Conexant modem, the driver agrsm with its dependent drivers:
>
> ----------
> provide audio + modem support with the modem chip residing on the subsystem.
> Any particular card can host any one of several soft modem chips.
>
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 00:1b.0:
> Modem chipset detected on
> NAME="Audio device: Intel Corporation 82801H "
> CLASS=0403
> PCIDEV=8086:284b
> SUBSYS=1025:0135
> IRQ=22
> HDA=8086:284b
> SOFT=8086:284b.HDA
> HDAchipVendorID=11c1
> CHIP=0x11c11040
> IDENT=agrsm
> Driver=agrsm
>
> For candidate modem in: 00:1b.0
> 0403 Audio device: Intel Corporation 82801H
> Primary device ID: 8086:284b
> Subsystem PCI_id 1025:0135
> Softmodem codec or chipset from diagnostics: 0x11c11040
> from Archives:
> The HDA card softmodem chip is 0x11c11040
>
>
> Support type needed or chipset: agrsm
>
>
> Writing DOCs/Intel.txt
>
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial
> driver pair.
> There are a few different chipsets which use this driver pair, but they use
> different code resources:
> Chipsets KV* PackageNames (most current as of
> November 2009)
> ----------------------------------------------------------------------------------------------
> 11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb
> or agrsm048pci-2.1.60_20091022.tar.gz
> 11c1:0620 2.6.28 agrsm06pci_2.1.80~20090825_i386.deb
> or agrsm06pci_2.1.80~20090825_i386.tar.gz
> 11c11040 (on HDA audio cards) 2.6.27
> dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or agrsm-2.1.80-10mdv2009.0.tar.gz
> All available at:
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
> additionally
> automation & testing agrsm-tools_0.0.1_all.deb or
> agrsm-tools-0.0.1-2.noarch.rpm
> General background agrsm_howto.txt
> for rpm variants of dkms-agrsm , see
> http://linux.zsolttech.com/linmodem/agrsm/
> ------------------------------------------------------------------------------------------------
> * KV == latest kernel release with a reported success
>
> All of the above packages are dkms competent. This means that if your Linux
> distros dkms package
> is previously installed, if provides for future updates matching forthcoming
> kernels.
>
> -------------- end Agere Systems section -------------------
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.4.1
> and the compiler used in kernel assembly: 4.4.1
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.4
> linuc_headers base folder /lib/modules/2.6.31-14-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
> Compressed files at: /usr/src/alsa-driver.tar.bz2
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-21 00:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>

From forum: Linux Winmodem Support - Discussion

Skyspeed Modem ( worked on XP , not in Ubuntu )

2009-11-24T19:12:58Z

I use USB modem ( CDMA ) , Brand : Skyspeed CDMA 1x , MC 101, worked
properly in XP with driver.
I cannot connect to Internet with the modem in Ubuntu 9.10.
My laptop : Acer Aspire 2920
My kernel :
$ uname -a
Linux rusli-acer 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26
UTC 2009 i686 GNU/Linux

I use Ubuntu Karmic Koala 9.10

I send this log ( *ModemData.txt *) , I hope you can help me
Sorry for my english, i'm an asian.
Thx for your attention and help.

regards,

Rusli

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2009_11_14

The dkms driver upgrade utilities are installed,

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
snd_hda_intel

Attached USB devices are:
ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
ID 064e:a103 Suyin Corp.
ID 05c6:1000 Qualcomm, Inc.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1025:0135 Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
22: 1108 1037 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.222107] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff]
[ 0.222177] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222182] pci 0000:00:1b.0: PME# disabled
[ 22.633536] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.633574] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.243540] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8

The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc200000 irq 22
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc200000 irq 22

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.28-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x10250100
Revision Id: 0x100200
Modem Function Group: 0x1

The audio card hosts a softmodem chip: 0x11c11040
If not a Conexant modem, the driver agrsm with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1025:0135
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1025:0135
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040

Support type needed or chipset: agrsm

Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20091022_i386.deb or agrsm048pci-2.1.60_20091022.tar.gz
11c1:0620 2.6.28 agrsm06pci_2.1.80~20090825_i386.deb or agrsm06pci_2.1.80~20090825_i386.tar.gz
11c11040 (on HDA audio cards) 2.6.27 dkms-agrsm_2.1.80-9mdv2009.0_i386.deb or agrsm-2.1.80-10mdv2009.0.tar.gz
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat additionally
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success

All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

Compressed files at: /usr/src/alsa-driver.tar.bz2

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-21 00:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: Hook, Germany, kernel 2.6.31-14-generic

2009-11-24T15:38:52Z

Harald,

scanModem reports that you need hsfmodem drivers(1) and that wvdial
utitily is not installed:(2). Upon installing drivers and the modem
would be still unreponsive, please follow the instructions given in
(3)

1)
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=1043:1826
IRQ=4
SOFT=8086:24c6.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers

For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 1043:1826
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.

Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.31_14_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

2)

The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu Jaunty users, there are at the bottom of
http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

(3)

For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1043:1826 Modem: Intel
Corporation 82801DB/DBL/DBM

Modem interrupt assignment and sharing:
4: 519331 XT-PIC-XT ipw2200, yenta, Intel 82801DB-ICH4, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.075278] pci 0000:00:1f.6: reg 10 io port: [0xe400-0xe4ff]
[ 0.075285] pci 0000:00:1f.6: reg 14 io port: [0xe080-0xe0ff]
[ 0.075323] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.075328] pci 0000:00:1f.6: PME# disabled
[ 0.793477] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4
(level, low) -> IRQ 4
[ 0.793485] serial 0000:00:1f.6: PCI INT B disabled

The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

Regards,

Antonio

On 11/24/09, Harald Klimpel <h2ok@...> wrote:
> Hi,
> so, scanModem tells me: Intel Corporation 82801DB/DBL/DBM
> But what to do now? Is it disabled in bootup?
>
> Best Regards
> Hook
>

From forum: Linux Winmodem Support - Discussion

Hook, Germany, kernel 2.6.31-14-generic

2009-11-24T15:29:31Z

Hi,
so, scanModem tells me: Intel Corporation 82801DB/DBL/DBM
But what to do now? Is it disabled in bootup?

Best Regards
Hook

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2009_11_14

The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1043:1826 Modem: Intel Corporation 82801DB/DBL/DBM

Modem interrupt assignment and sharing:
4: 519331 XT-PIC-XT ipw2200, yenta, Intel 82801DB-ICH4, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.075278] pci 0000:00:1f.6: reg 10 io port: [0xe400-0xe4ff]
[ 0.075285] pci 0000:00:1f.6: reg 14 io port: [0xe080-0xe0ff]
[ 0.075323] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.075328] pci 0000:00:1f.6: PME# disabled
[ 0.793477] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
[ 0.793485] serial 0000:00:1f.6: PCI INT B disabled

The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1

about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with STAC9750,51 at irq 4
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=1043:1826
IRQ=4
SOFT=8086:24c6.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers

For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 1043:1826
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.

Support type needed or chipset: hsfmodem

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.31_14_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_14_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: Persico Marino, Italy Puppy Linux

2009-11-23T05:41:35Z

Antonio,

Please help with the Italian, if Persico's English is to poor

Persico,
Driver snd-ali5451 supports both audio and modem functions of the
ALI5451 card.
For modem service it is complemented by the slmodemd utility. Root command
# slmodemd -c ITALY --alsa modem:1
should setup your modem. The slmodemd is available at
http://linmodems.technion.ac.il/packages/smartlink/
Try the package SLMODEMD_gcc4.2_alsa1.0.17.tar.gz , to get a match
with the gcc-4.2 of your System, through there is a mismatch with the
ALSA 1.0.20 version your System.

Please report back after testing in English if you can.
The diagnostic output from your Puppy Linux system is quite different
from that of most other Linux Distros.

Pink,
Would you please also track this case of a ali54541 modem.

MarvS

On Mon, Nov 23, 2009 at 3:35 AM, Persico Marino Narciso
<Marino.Persico@...> wrote:
> <<ModemData.txt>>
>
> ModemData.txt
>
> Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione. Grazie.
>
> Pursuant to Legislative Decree No. 196/2003, you are hereby informed that this message contains confidential information intended only for the use of the addressee. If you are not the addressee, and have received this message by mistake, please delete it and immediately notify us. You may not copy or disseminate this message to anyone. Thank you.
>

From forum: Linux Winmodem Support - Discussion

Persico Marino, Italy Puppy Linux

2009-11-23T00:35:31Z

<<ModemData.txt>>

ModemData.txt

Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione. Grazie.

Pursuant to Legislative Decree No. 196/2003, you are hereby informed that this message contains confidential information intended only for the use of the addressee. If you are not the addressee, and have received this message by mistake, please delete it and immediately notify us. You may not copy or disseminate this message to anyone. Thank you.

Only plain text email is forwarded by the Discuss@... List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Puppy Linux
Linux 2.6.30.5 [i686 arch] kernel 2.6.30.5
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@... are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Puppy Linux
Linux 2.6.30.5 [i686 arch]
Linux version 2.6.30.5 (root@puppypc) (gcc version 4.2.2) #1 SMP Tue Sep 1 15:48:26 GMT-8 2009
scanModem update of: 2009_11_14

Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:

Checking /proc/bus/usb/devices
USB modem not detected among /proc/bus/usb/devices.

For candidate card in slot 00:06.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:06.0 10b9:5451 1179:0001 Class 0401: 10b9:5451

Modem interrupt assignment and sharing:
11: 17 XT-PIC-XT yenta, yenta, ohci_hcd:usb1, ALI 5451
--- Bootup diagnostics for card in PCI slot 00:06.0 ----
pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff]
pci 0000:00:06.0: reg 14 32bit mmio: [0xfdffe000-0xfdffefff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
ALI 5451 0000:00:06.0: found PCI INT A -> IRQ 11

The PCI slot 00:06.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are:
card 0: A5451 [ALI 5451], device 1: ALI 5451 modem [ALI 5451 modem]

The /proc/asound/pcm file reports:
-----------------------
00-00: ALI 5451 : ALI 5451 : playback 32 : capture 1
00-01: ALI 5451 modem : ALI 5451 modem : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [A5451 ]: ALI5451 - ALI 5451
ALI 5451 at 0xed00, irq 11
Driver snd-ali5451 supports both audio and modem functions of the ALI5451 card.
If not a Conexant modem, the driver snd-ali5451 with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

The kernel was compiled with gcc version 4.2.2 and a compiler is not installed

linux-headers-2.6.30.5 resources needed for compiling are not manifestly ready!
The code linking utility, ld, may be needed and is provided in the binutils package
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

If compiling is necessary packages must be installed, providing:
gcc-4.2 make kernel-source-2.6.30.5

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-r-xr-xr-x 1 root root 355644 2009-07-09 03:17 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
lock
defaultroute
noipdefault
noauth
usepeerdns
modem
115200
crtscts
debug
asyncmap 0
name "barney"

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

#v413 Loads modules for modems not autodetected by kernel
SUBSYSTEM=="pci", GOTO="modem_pci"
GOTO="modem_end"
LABEL="modem_pci"

#Modems 536EP and 537SP share ID 8086:1040, so subvendor and subdevice are also tested...
ATTR{vendor}=="0x8086", ATTR{device}=="0x1040", ACTION=="add", GOTO="I80861040"
GOTO="Not_I80861040"
LABEL="I80861040"
ATTR{subsystem_vendor}=="0x8086", ATTR{subsystem_device}=="0x1005", GOTO="I537SP"
#Intel Corporation 536EP Data Fax Modem
RUN+="/sbin/pup_event_backend_modprobe Intel536"
GOTO="Not_I537SP"
LABEL="I537SP"
#Intel 537EP SP Data Modem
RUN+="/sbin/pup_event_backend_modprobe intel537SP"
LABEL="Not_I537SP"
LABEL="Not_I80861040"

#Intel Corporation 537EP Data Fax Modem
ATTR{vendor}=="0xe159", ATTR{device}=="0x0001", ACTION=="add", PROGRAM+="/bin/sh -c '[ -d /lib/modules/`/bin/uname -r`/intelmodem ] && echo intel537 || echo Intel537'", RUN+="/sbin/pup_event_backend_modprobe %c"
ATTR{vendor}=="0x1813", ATTR{device}=="0x3052", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537"

#Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
ATTR{vendor}=="0x8086", ATTR{device}=="0x1080", ACTION=="add", PROGRAM+="/bin/sh -c '[ -d /lib/modules/`/bin/uname -r`/intelmodem ] && echo intel537EP || echo Intel537'", RUN+="/sbin/pup_event_backend_modprobe %c"
ATTR{vendor}=="0x1543", ATTR{device}=="0x3052", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EP"

#Intel 537EP EA Data Modems
ATTR{vendor}=="0x10b9", ATTR{device}=="0x5457", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"
ATTR{vendor}=="0x1002", ATTR{device}=="0x434D", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"
ATTR{vendor}=="0x8086", ATTR{device}=="0x24[4cd]6", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"
ATTR{vendor}=="0x10de", ATTR{device}=="0x01c1", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"
ATTR{vendor}=="0x1039", ATTR{device}=="0x7013", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"
ATTR{vendor}=="0x1106", ATTR{device}=="0x3068", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe intel537EA"

#Mwave modems
ATTR{vendor}=="0x1014", ATTR{device}=="0x007d", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe mwave"

#Agere modems - non-HDA
ATTR{vendor}=="0x11c1", ATTR{device}=="0x06[23]0", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe agrserial"
ATTR{vendor}=="0x8086", ATTR{device}=="0x24[1248cd]6", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe agrserial"
ATTR{vendor}=="0x8086", ATTR{device}=="0x7196", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe agrserial"
ATTR{vendor}=="0x11c1", ATTR{device}=="0x048[cf]", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe agrserial"
ATTR{vendor}=="0x8086", ATTR{device}=="0x266d", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe agrserial"

#Lucent Integrated ISA modems - implied by presence of PC-to-ISA bridge
#If you need this rule, remove the "#" from the next line. Some PCs might show a modem installed even though not actually present. Uncomment the line only if you know you have a built-in Lucent modem that is not already recognized.
#ATTR{vendor}=="0x8086", ATTR{device}=="0x7110", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe ltmodem"

LABEL="modem_end"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/51-hso.rules:SUBSYSTEM=="usb", ATTRS{idVendor}=="0af0", ACTION=="add", RUN+="/bin/sh -c 'echo HSO_RULES_TRIGGERED_FOR_$env{SUBSYSTEM}_V%s{idVendor}_P%s{idProduct}_DC%s{bDeviceClass}_DEVTYPE_$env{DEVTYPE} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/51-hso.rules:SUBSYSTEM=="scsi", ATTRS{idVendor}=="0af0", ACTION=="add", ENV{DEVTYPE}=="scsi_device", RUN+="/bin/sh -c 'echo HSO_RULES_TRIGGERED_FOR_$env{SUBSYSTEM}_V%s{idVendor}_P%s{idProduct}_DC%s{bDeviceClass}_DEVTYPE_$env{DEVTYPE} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/51-hso.rules:SUBSYSTEM=="usb", ATTR{idVendor}=="0af0", ATTR{bDeviceClass}=="ff", ACTION=="add", RUN+="/bin/sh -c 'echo hso_setsuspend: $env{SUBSYSTEM}_ATTR_V%s{idVendor}_P%s{idProduct}_DC%s{bDeviceClass} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/51-hso.rules:RUN+="/bin/sh -c 'echo hso_zerocd_disabler:_$env{SUBSYSTEM}_V%s{idVendor}_P%s{idProduct}_DC%s{bDeviceClass}_DEVTYPE_$env{DEVTYPE} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/51-hso.rules:RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_$env{SUBSYSTEMS}_Add_device_node_link_for_HSOTYPE_%s{hsotype} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/51-hso.rules:ATTR{hsotype}=="Modem", SYMLINK+="wmodem0"
/etc/udev/rules.d/51-usb_modeswitch-option-Novatel-0x1410-0x5010.rules:# Novatel U727 USB modem
/etc/udev/rules.d/51-usb_modeswitch-option.rules:#Huawei modems switched by changing class with the -H argument
/etc/udev/rules.d/51-usb_modeswitch-option.rules:# Try this only if the message from the AC8710 (No. 1) does not also work for this modem. (
/etc/udev/rules.d/51-usb_modeswitch-option.rules:# Novatel U760 USB modem
/etc/udev/rules.d/51-usb_modeswitch-option.rules:# at least stay in modem mode now
/etc/udev/rules.d/60-dialup-modem.rules:#v413 Loads modules for modems not autodetected by kernel
/etc/udev/rules.d/60-dialup-modem.rules:SUBSYSTEM=="pci", GOTO="modem_pci"
/etc/udev/rules.d/60-dialup-modem.rules:GOTO="modem_end"
/etc/udev/rules.d/60-dialup-modem.rules:LABEL="modem_pci"
/etc/udev/rules.d/60-dialup-modem.rules:ATTR{vendor}=="0xe159", ATTR{device}=="0x0001", ACTION=="add", PROGRAM+="/bin/sh -c '[ -d /lib/modules/`/bin/uname -r`/intelmodem ] && echo intel537 || echo Intel537'", RUN+="/sbin/pup_event_backend_modprobe %c"
/etc/udev/rules.d/60-dialup-modem.rules:ATTR{vendor}=="0x8086", ATTR{device}=="0x1080", ACTION=="add", PROGRAM+="/bin/sh -c '[ -d /lib/modules/`/bin/uname -r`/intelmodem ] && echo intel537EP || echo Intel537'", RUN+="/sbin/pup_event_backend_modprobe %c"
/etc/udev/rules.d/60-dialup-modem.rules:#Mwave modems
/etc/udev/rules.d/60-dialup-modem.rules:#Agere modems - non-HDA
/etc/udev/rules.d/60-dialup-modem.rules:#Lucent Integrated ISA modems - implied by presence of PC-to-ISA bridge
/etc/udev/rules.d/60-dialup-modem.rules:#If you need this rule, remove the "#" from the next line. Some PCs might show a modem installed even though not actually present. Uncomment the line only if you know you have a built-in Lucent modem that is not already recognized.
/etc/udev/rules.d/60-dialup-modem.rules:#ATTR{vendor}=="0x8086", ATTR{device}=="0x7110", ACTION=="add", RUN+="/sbin/pup_event_backend_modprobe ltmodem"
/etc/udev/rules.d/60-dialup-modem.rules:LABEL="modem_end"
/etc/udev/rules.d/90-udev-rule-trace.rules:#Trace modem-related uevents to /tmp/udevtrace-modem.log
/etc/udev/rules.d/90-udev-rule-trace.rules:SUBSYSTEM=="usb", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_v%s{idVendor}_p%s{idProduct}_d%s{bcdDevice}_dc%s{bDeviceClass}_ic%s{bInterfaceClass}_$env{DEVTYPE}_%s{manufacturer}_%s{product}_%s{model} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:#SUBSYSTEM=="usb", RUN+="/bin/sh -c 'echo Same_entry_using_$attr_variables:_$env{SUBSYSTEM}_v$attr{idVendor}_p$attr{idProduct}_d$attr{bcdDevice}_dc$attr{bDeviceClass}_ic$attr{bInterfaceClass}_$env{DEVTYPE}_$attr{manufacturer}_$attr{product}_$attr{model} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:SUBSYSTEM=="pcmcia", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_v%s{idVendor}_p%s{idProduct}_d%s{bcdDevice}_dc%s{bDeviceClass}_ic%s{bInterfaceClass}_%s{manufacturer}_%s{product}_%s{model} >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:SUBSYSTEM=="tty", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="hso", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="ipw", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="ipwireless", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="motomodem", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="nozomi", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="option", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="sierra", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="usbserial", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:KERNEL=="serial_cs", SUBSYSTEM=="module", RUN+="/bin/sh -c 'echo $env{SUBSYSTEM}_%k >> /tmp/udevtrace-modem.log'"
/etc/udev/rules.d/90-udev-rule-trace.rules:SUBSYSTEM=="module", PROGRAM="uname -r", RUN+="/bin/sh -c 'echo linux_version_%c, >> /tmp/udevtrace-modem.log'"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules/firmware.dep.2.6.30.5:#a firmware pkg can have a post-install script -- see slmodem example.
/etc/modules/firmware.dep.2.6.30.5:#analog modem drivers...
/etc/modules/firmware.dep.2.6.30.5:dgcmodem:dgcusbdcp.ko
/etc/modules/firmware.dep.2.6.30.5:hcfpcimodem:hcfpcihw.ko
/etc/modules/firmware.dep.2.6.30.5:hsfmodem:hsfhda.ko,hsfmc97ali.ko,hsfmc97ati.ko,hsfmc97ich.ko,hsfmc97sis.ko,hsfmc97via.ko,hsfpcibasic2.ko,hsfpcibasic3.ko,hsfusbcd2.ko
/etc/modules/firmware.dep.2.6.30.5:ltmodem:ltmodem.ko
/etc/modules/firmware.dep.2.6.30.5:#slmodem:slamr.ko,slusb.ko,snd-via82xx-modem.ko,snd-atiixp-modem.ko,snd-intel8x0m.ko,snd-hda-intel.ko,snd-ali5451.ko
/etc/modules/firmware.dep.2.6.30.5:#wireless usb modem drivers...
/etc/modules/firmware.dep.2.6.30.5:motomodem:moto_modem.ko
/etc/modules/firmware.dep:#a firmware pkg can have a post-install script -- see slmodem example.
/etc/modules/firmware.dep:#analog modem drivers...
/etc/modules/firmware.dep:dgcmodem:dgcusbdcp.ko
/etc/modules/firmware.dep:hcfpcimodem:hcfpcihw.ko
/etc/modules/firmware.dep:hsfmodem:hsfhda.ko,hsfmc97ali.ko,hsfmc97ati.ko,hsfmc97ich.ko,hsfmc97sis.ko,hsfmc97via.ko,hsfpcibasic2.ko,hsfpcibasic3.ko,hsfusbcd2.ko
/etc/modules/firmware.dep:ltmodem:ltmodem.ko,ltserial.ko
/etc/modules/firmware.dep:slmodem:slamr.ko,slusb.ko,snd-via82xx-modem.ko,snd-atiixp-modem.ko,snd-intel8x0m.ko,snd-hda-intel.ko,snd-ali5451.ko
/etc/modules/firmware.dep:#wireless usb modem drivers...
/etc/modules/firmware.dep:motomodem:moto_modem.ko
--------- end modem support lines --------

From forum: Linux Winmodem Support - Discussion

Re: sm56 ubuntu 9.10

2009-11-22T15:04:46Z

RE: > isn't there any other solution?
Not until someone with good COMM code knowledge can make a fix.

But the 2.6.28 kernels serve fine on an otherwise Ubuntu 9.10 Karmic system.
Then is what I'm using now on a MacBook, because I haven't full tamed
touchpad/mouse irregularity under the 2.6.31 kernels.

MarvS

On Sun, Nov 22, 2009 at 12:30 PM, Mirko Zanda <mirkuz9991@...> wrote:

> if i have to keep 2.6.28 kernel i prefer keep on staying on jaunty...
> isn't there any other solution?
>
> 2009/11/22, Marvin Stodolsky <marvin.stodolsky@...>:
>> Mirko,
>>
>> The core problem then is that under 2.6.31 kernels, the dialout using
>> the slamr driver is failing with:
>> No Carrier
>> Though Amtonio reports success upto 2.8.30 kernels on a SLACK system
>> You can use 2.6.28 kernels on a Karmic system. However to compile,
>> you will have to install gcc-4.3 and linux-headers matching your
>> kernel.
>>
>> Note that I have prepared some slamr install packages at
>> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/
>>
>> MarvS
>>
>> On Sat, Nov 21, 2009 at 8:16 PM, Mirko Zanda <mirkuz9991@...> wrote:
>>> well, i'm sorry i wasn't really clear in my last mail. i actually have
>>> been using this modem since 8.04, it is a motorola sm56 modem. i did
>>> install sl-modem-daemon,sl-modem-source, (all the dipendencies he
>>> asked), compiled and installed the modules. i've also made the file
>>>
>>> /etc/modprobe.d/mirko.conf
>>>
>>>
>>> with inside:
>>> install slamr modprobe --ignore-install ungrab-winmodem ; modprobe
>>> --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660
>>> /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
>>>
>>>
>>> (mirko.conf and its content was given me by Marvin for 9.04, so i
>>> think it may work this time too)
>>>
>>> wvdial.conf is alright. i'm actually copying the file from the old
>>> system to the new one, and there is no chance for it to change...
>>>
>>> if you need more info here i am.
>>>
>>>
>>> ---Mirko
>>>
>>> 2009/11/21, Marvin Stodolsky <marvin.stodolsky@...>:
>>>> Mirko,
>>>>
>>>> There are a few chipsets which are under Microsoft all called sm56.
>>>> Only the 1057:3052 chipset is supported in principle by slamr.
>>>> But in practice, the last kernel supported is 2.8.30, with a "No
>>>> Carrier" error reported for 2.8.31
>>>>
>>>> Did you even have slamr support under earlier kernels?
>>>> If not best download and run scanModem. Then send us the output
>>>> ModemData.txt
>>>>
>>>> MarvS
>>>>
>>>> On Sat, Nov 21, 2009 at 2:01 PM, Jacques Goldberg
>>>> <Jacques.Goldberg@...> wrote:
>>>>> Excuse me Mirko but every human is allowed and bound to make mistakes:
>>>>> did
>>>>> you remember to have
>>>>>
>>>>> Carrier Check = no
>>>>>
>>>>> in your wvdial.conf ?
>>>>>
>>>>>
>>>>> If your problem is more serious than that, can you please supply us with
>>>>> your ModemData.txt generated by scanModem , and a copy of the output of
>>>>> wvdial when you try to connect ?
>>>>>
>>>>> (http://linmodems.technion.ac.il#scanModem , if you did not use
>>>>> scanModem
>>>>> before)
>>>>>
>>>>>
>>>>> Jacques
>>>>>
>>>>> Mirko Zanda wrote:
>>>>>
>>>>>> i'm trying to get sm56 working on ubuntu on 9.10 but it keeps saying
>>>>>> no carrier... i'm sure wvdial.conf is ok because it works in previous
>>>>>> versions. anyone who can help?
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

From forum: Linux Winmodem Support - Discussion

Re: Luca Cusi, Italy, Kernel 2.6.31-14-generic

2009-11-22T09:28:56Z

Luca,

There are problems under 2.6.31 kernels with slamr support of
Smartlink chipsets like your:
Modem: Smart Link Ltd. LM-I56N "
CLASS=0703
PCIDEV=2003:8800

On a 2.6.30 Slackware system dialout was OK,
but under 2.6.31 there is a persisting error:
No Carrier

Was dialout and/or fax working under any earlier kernel?

MarvS

On Sun, Nov 22, 2009 at 9:31 AM, Luca Cusi <lamar.8@...> wrote:

> Hi mainteiners,
> I'm here to ask a suggestion to fit an Hamlet Pci modem to use as fax.
>
> First I copied the modemdata.txt and then the efax output log
>
> Thanks and Regards
>
> Luca Cusi
>
>
> Only plain text email is forwarded by the Discuss@... List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.31-14-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@... are sometimes blocked by an
> Internet Provider mail filters.
> So in a day, also check the Archived responses at
> http://www.linmodems.org
> -------------------------- System information
> ----------------------------
> CPU=i686,
> Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1
> (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
> scanModem update of: 2009_11_14
> The modem symbolic link is /dev/modem -> ttySL0
> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
>
> The dkms driver upgrade utilities are installed,
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
> slamr snd_hda_intel
>
> slamrTest=
> Attached USB devices are:
> ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
> ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@...
>
> For candidate card in slot 01:09.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 01:09.0 2003:8800 1801:2800 Modem: Smart Link Ltd. LM-I56N
>
> Modem interrupt assignment and sharing:
> 17: 0 0 IO-APIC-fasteoi SL2800
> --- Bootup diagnostics for card in PCI slot 01:09.0 ----
> [ 0.194004] pci 0000:01:09.0: reg 10 32bit mmio:
> [0xd7000000-0xd7ffffff]
> [ 0.194059] pci 0000:01:09.0: PME# supported from D3hot D3cold
> [ 0.194064] pci 0000:01:09.0: PME# disabled
> [ 0.845531] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [ 0.845538] serial 0000:01:09.0: PCI INT A disabled
> [ 11.911744] slamr 0000:01:09.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
>
> The PCI slot 01:09.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@...
> if help is needed.
>
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1b.0 8086:2668 1043:814e Audio device: Intel Corporation
> 82801FB/FBM/FR/FW/FRW
>
> Modem interrupt assignment and sharing:
> 16: 73030 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel,
> radeon@pci:0000:04:00.0
> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [ 0.192545] pci 0000:00:1b.0: reg 10 64bit mmio:
> [0xd6cf4000-0xd6cf7fff]
> [ 0.192593] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.192598] pci 0000:00:1b.0: PME# disabled
> [ 12.294667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 12.294700] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 12.531508] input: HDA Digital PCBeep
> as /devices/pci0000:00/0000:00:1b.0/input/input4
>
> The PCI slot 00:1b.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@...
> if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some
> modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.20
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 1
> 00-01: ALC880 Digital : ALC880 Digital : playback 1
> 00-02: ALC880 Analog : ALC880 Analog : capture 2
>
> about /proc/asound/cards:
> ------------------------
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xd6cf4000 irq 16
>
> PCI slot 00:1b.0 has a High Definition Audio Card
> The drivers are in the kernel modules tree at:
> /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> UNEXPECTED HDA diagnostic outcome.
> === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>
> Predictive diagnostics for card in bus 01:09.0:
> Modem chipset detected on
> NAME="Modem: Smart Link Ltd. LM-I56N "
> CLASS=0703
> PCIDEV=2003:8800
> SUBSYS=1801:2800
> IRQ=17
> IDENT=slamr
>
> For candidate modem in: 01:09.0
> 0703 Modem: Smart Link Ltd. LM-I56N
> Primary device ID: 2003:8800
> Support type needed or chipset: slamr
>
>
>
> Writing DOCs/Intel.txt
> The modem is supported by the Smartlink
> plus the slmodemd helper utility. Read the
> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
> guidance.
>
>
> From http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
> download the package slamr-2.6.31-14-generic.tar.gz
> Under Linux, open a terminal and unpack with:
> $ tar zxvf slamr*.tar.gz
> Move into the unpacked folder
> $ cd slamr-2.6.31-14-generic
> Look around
> $ ls
> Run the
> $ sudo ./setup
>
> Afterwards do:
> $ slmodemd --help
> $ slmodemd --countrylist &> Clist.txt
> If not in the USA, look for your COUNTRY_NAME therein.
> Do and edit with:
> $ sudo gedit /etc/default/sl-modem-daemon
> and therein replace the USA in the line:
> SLMODEMD_COUNTRY=USA
> This will provide for the correct Country setting in the automated:
> slmodemd -c COUNTRY /dev/slamr0
>
> Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
> Writing DOCs/Smartlink.txt
> ============ end Smartlink section =====================
>
>
> Predictive diagnostics for card in bus 00:1b.0:
> Modem chipset not detected on
> NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW "
> CLASS=0403
> PCIDEV=8086:2668
> SUBSYS=1043:814e
> IRQ=16
> HDA=8086:2668
> SOFT=8086:2668.HDA
>
>
> High Definition Audio (HDA) cards MAY host a modem chip in their
> Subsystem,
> and many are supported by the ALSA audio+modem driver snd-hda-intel
> A modem was not detected on HDA card 8086:2668.
> If another modem card is present, then most likely 8086:2668 does not
> host a modem.
> If another modem card has not been detected, then possibilities are:
> 1) A Conexant modem chip is present on 8086:2668, as Conexant chips
> are frequently not detectable by ALSA diagnostics
> 2) The modem may be of the older non-PCI Controller Chipset
> (hardware) type.
> Try detection with Root permission:
> sudo wvdialconf /etc/wvdial.conf
>
> For candidate modem in: 00:1b.0
> 0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
> Primary device ID: 8086:2668
> Subsystem PCI_id 1043:814e
> Softmodem codec or chipset from diagnostics:
> from Archives:
>
>
>
> Support type needed or chipset:
>
> Support can likely be achieved through two mutually exclusive
> alternatives:
> 1) The hsfmodem software for Conexant chipset modems: Read
> DOCs/Conexant.txt
> The following ALSA alternative CANNOT work with Conexant modems.
>
> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for
> details, and
> to test get the package SLMODEMD.gcc4.4.tar.gz from:
> http://linmodems.technion.ac.il/packages/smartlink/
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.4.1
> and the compiler used in kernel assembly: 4.4.1
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.4
> linuc_headers base folder /lib/modules/2.6.31-14-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed
> in /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
> Compressed files at: /usr/src/sl-modem.tar.bz2
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2009-11-22
> 11:13 /dev/modem -> ttySL0
> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10
> 2009-11-22 11:13 /dev/ttySL0 -> /dev/pts/0
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/sl-modem-daemon.conf:install slamr modprobe
> --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr;
> test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0
> 2>/dev/null && chgrp dialout /dev/slamr0)
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
> to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>
> brennero@brennero-desktop:~$ sudo fax -v send
> 00390522382185 /home/brennero/Scrivania/Prova
> [sudo] password for
> brennero:
> /home/brennero/Scrivania/Prova is
> text...
> efax: Sun Nov 22 12:55:57 2009 efax v 0.9a-001114 Copyright 1999 Ed
> Casas
> efax: 55:57 TIFF version 4.2 file
> (little-endian)
> efax: 55:57 TIFF directory at 8 with 17 tags, last
> image.
> efax: 55:57 page 1 : /home/brennero/Scrivania/Prova.001 + 234 :
> 1688x2292 @ 204x196 dpi TIFF/FAX
> efax: 55:57
> argv[0]=efax
> efax: 55:57
> argv[1]=-v
> efax: 55:57
> argv[2]=chewmainrxtf
> efax: 55:57
> argv[3]=-v
> efax: 55:57
> argv[4]=chewmainrxtf
> efax: 55:57
> argv[5]=-d/dev/ttyS1
> efax: 55:57
> argv[6]=-x
> efax: 55:57
> argv[7]=/var/lock/LCK..ttyS1
> efax: 55:57
> argv[8]=-iZ
> efax: 55:57
> argv[9]=-i&FE&D2S7=120
> efax: 55:57
> argv[10]=-i&C0
> efax: 55:57
> argv[11]=-iM1L0
> efax: 55:57
> argv[12]=-l
> efax: 55:57 argv[13]=+1 800 555
> 5555
> efax: 55:57
> argv[14]=-kZ
> efax: 55:57
> argv[15]=-h
> efax: 55:57 argv[16]=2009/11/22 12:55 +1 800 555 5555 Put Your Name Here
> p. %d/%d
> efax: 55:57
> argv[17]=-t
> efax: 55:57
> argv[18]=T00390522382185
> efax: 55:57
> argv[19]=/home/brennero/Scrivania/Prova.001
> efax: 55:57 created text lock
> file /var/lock/LCK..ttyS1
> efax: 55:57
> opened /dev/ttyS1
> efax: 55:57 Error: tcgetattr on fd=3 failed: Errore di
> I/O
> efax: 55:57 failed
> -> /home/brennero/Scrivania/Prova.001
> efax: 55:57 command
> "Q0V1"
> efax: 55:57 Error: fax device write: Errore di
> I/O
> efax: 55:57 waiting 2,0
> s
> efax: 55:59 Error: tcgetattr on fd=3 failed: Errore di
> I/O
> efax: 55:59 waiting 2,0
> s
> efax: 56:01 command
> "Q0V1"
> efax: 56:01 Error: fax device write: Errore di
> I/O
> efax: 56:01 waiting 2,0
> s
> efax: 56:03 sync: dropping
> DTR
> efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di
> I/O
> efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di I/O
> efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di I/O
> efax: 56:03 waiting 2,0 s
> efax: 56:06 command "Q0V1"
> efax: 56:06 Error: fax device write: Errore di I/O
> efax: 56:06 waiting 2,0 s
> efax: 56:08 sync: sending escapes
> efax: 56:08 Error: tcgetattr on fd=3 failed: Errore di I/O
> efax: 56:08 Error: fax device write: Errore di I/O
> efax: 56:08 Error: fax device write: Errore di I/O
> efax: 56:08 Error: tcgetattr on fd=3 failed: Errore di I/O
> efax: 56:08 Error: fax device write: Errore di I/O
> efax: 56:08 Error: fax device write: Errore di I/O
> efax: 56:09 Error: fax device write: Errore di I/O
> efax: 56:09 waiting 2,0 s
> efax: 56:11 command "Q0V1"
> efax: 56:11 Error: fax device write: Errore di I/O
> efax: 56:11 waiting 2,0 s
> efax: 56:13 Error: sync: modem not responding
> efax: 56:13 Error: tcgetattr on fd=3 failed: Errore di I/O
> efax: 56:13 read HDB pid 3228 [ 3228<LF>] from /var/lock/LCK..ttyS1
> (our pid)
> efax: 56:13 removed lock file /var/lock/LCK..ttyS1
> efax: 56:13 done, returning 2 (unrecoverable error)
> There were errors (see T00390522382185.efax.log).
> brennero@brennero-desktop:~$ cat /boot/grub/mem
> memdisk.mod memrw.mod
>
>

From forum: Linux Winmodem Support - Discussion

Luca Cusi, Italy, Kernel 2.6.31-14-generic

2009-11-22T06:31:56Z

Hi mainteiners,
I'm here to ask a suggestion to fit an Hamlet Pci modem to use as fax.

First I copied the modemdata.txt and then the efax output log

Thanks and Regards

Luca Cusi

Only plain text email is forwarded by the Discuss@... List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@... are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2009_11_14
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0

The dkms driver upgrade utilities are installed,

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
slamr snd_hda_intel

slamrTest=
Attached USB devices are:
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@...

For candidate card in slot 01:09.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:09.0 2003:8800 1801:2800 Modem: Smart Link Ltd. LM-I56N

Modem interrupt assignment and sharing:
17: 0 0 IO-APIC-fasteoi SL2800
--- Bootup diagnostics for card in PCI slot 01:09.0 ----
[ 0.194004] pci 0000:01:09.0: reg 10 32bit mmio:
[0xd7000000-0xd7ffffff]
[ 0.194059] pci 0000:01:09.0: PME# supported from D3hot D3cold
[ 0.194064] pci 0000:01:09.0: PME# disabled
[ 0.845531] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 0.845538] serial 0000:01:09.0: PCI INT A disabled
[ 11.911744] slamr 0000:01:09.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17

The PCI slot 01:09.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:2668 1043:814e Audio device: Intel Corporation
82801FB/FBM/FR/FW/FRW

Modem interrupt assignment and sharing:
16: 73030 0 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel,
radeon@pci:0000:04:00.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.192545] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xd6cf4000-0xd6cf7fff]
[ 0.192593] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.192598] pci 0000:00:1b.0: PME# disabled
[ 12.294667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 12.294700] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.531508] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input4

The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@...
if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 1
00-01: ALC880 Digital : ALC880 Digital : playback 1
00-02: ALC880 Analog : ALC880 Analog : capture 2

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd6cf4000 irq 16

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===

Predictive diagnostics for card in bus 01:09.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. LM-I56N "
CLASS=0703
PCIDEV=2003:8800
SUBSYS=1801:2800
IRQ=17
IDENT=slamr

For candidate modem in: 01:09.0
0703 Modem: Smart Link Ltd. LM-I56N
Primary device ID: 2003:8800
Support type needed or chipset: slamr

Writing DOCs/Intel.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.

From http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
download the package slamr-2.6.31-14-generic.tar.gz
Under Linux, open a terminal and unpack with:
$ tar zxvf slamr*.tar.gz
Move into the unpacked folder
$ cd slamr-2.6.31-14-generic
Look around
$ ls
Run the
$ sudo ./setup

Afterwards do:
$ slmodemd --help
$ slmodemd --countrylist &> Clist.txt
If not in the USA, look for your COUNTRY_NAME therein.
Do and edit with:
$ sudo gedit /etc/default/sl-modem-daemon
and therein replace the USA in the line:
SLMODEMD_COUNTRY=USA
This will provide for the correct Country setting in the automated:
slmodemd -c COUNTRY /dev/slamr0

Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0403
PCIDEV=8086:2668
SUBSYS=1043:814e
IRQ=16
HDA=8086:2668
SOFT=8086:2668.HDA

High Definition Audio (HDA) cards MAY host a modem chip in their
Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:2668.
If another modem card is present, then most likely 8086:2668 does not
host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:2668, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset
(hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary device ID: 8086:2668
Subsystem PCI_id 1043:814e
Softmodem codec or chipset from diagnostics:
from Archives:

Support type needed or chipset:

Support can likely be achieved through two mutually exclusive
alternatives:
1) The hsfmodem software for Conexant chipset modems: Read
DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for
details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

Compressed files at: /usr/src/sl-modem.tar.bz2

If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:

http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2009-11-22
11:13 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10
2009-11-22 11:13 /dev/ttySL0 -> /dev/pts/0
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem-daemon.conf:install slamr modprobe
--ignore-install ungrab-winmodem ; modprobe --ignore-install slamr;
test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0
2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

brennero@brennero-desktop:~$ sudo fax -v send
00390522382185 /home/brennero/Scrivania/Prova
[sudo] password for
brennero:
/home/brennero/Scrivania/Prova is
text...
efax: Sun Nov 22 12:55:57 2009 efax v 0.9a-001114 Copyright 1999 Ed
Casas
efax: 55:57 TIFF version 4.2 file
(little-endian)
efax: 55:57 TIFF directory at 8 with 17 tags, last
image.
efax: 55:57 page 1 : /home/brennero/Scrivania/Prova.001 + 234 :
1688x2292 @ 204x196 dpi TIFF/FAX
efax: 55:57
argv[0]=efax
efax: 55:57
argv[1]=-v
efax: 55:57
argv[2]=chewmainrxtf
efax: 55:57
argv[3]=-v
efax: 55:57
argv[4]=chewmainrxtf
efax: 55:57
argv[5]=-d/dev/ttyS1
efax: 55:57
argv[6]=-x
efax: 55:57
argv[7]=/var/lock/LCK..ttyS1
efax: 55:57
argv[8]=-iZ
efax: 55:57
argv[9]=-i&FE&D2S7=120
efax: 55:57
argv[10]=-i&C0
efax: 55:57
argv[11]=-iM1L0
efax: 55:57
argv[12]=-l
efax: 55:57 argv[13]=+1 800 555
5555
efax: 55:57
argv[14]=-kZ
efax: 55:57
argv[15]=-h
efax: 55:57 argv[16]=2009/11/22 12:55 +1 800 555 5555 Put Your Name Here
p. %d/%d
efax: 55:57
argv[17]=-t
efax: 55:57
argv[18]=T00390522382185
efax: 55:57
argv[19]=/home/brennero/Scrivania/Prova.001
efax: 55:57 created text lock
file /var/lock/LCK..ttyS1
efax: 55:57
opened /dev/ttyS1
efax: 55:57 Error: tcgetattr on fd=3 failed: Errore di
I/O
efax: 55:57 failed
-> /home/brennero/Scrivania/Prova.001
efax: 55:57 command
"Q0V1"
efax: 55:57 Error: fax device write: Errore di
I/O
efax: 55:57 waiting 2,0
s
efax: 55:59 Error: tcgetattr on fd=3 failed: Errore di
I/O
efax: 55:59 waiting 2,0
s
efax: 56:01 command
"Q0V1"
efax: 56:01 Error: fax device write: Errore di
I/O
efax: 56:01 waiting 2,0
s
efax: 56:03 sync: dropping
DTR
efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di
I/O
efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di I/O
efax: 56:03 Error: tcgetattr on fd=3 failed: Errore di I/O
efax: 56:03 waiting 2,0 s
efax: 56:06 command "Q0V1"
efax: 56:06 Error: fax device write: Errore di I/O
efax: 56:06 waiting 2,0 s
efax: 56:08 sync: sending escapes
efax: 56:08 Error: tcgetattr on fd=3 failed: Errore di I/O
efax: 56:08 Error: fax device write: Errore di I/O
efax: 56:08 Error: fax device write: Errore di I/O
efax: 56:08 Error: tcgetattr on fd=3 failed: Errore di I/O
efax: 56:08 Error: fax device write: Errore di I/O
efax: 56:08 Error: fax device write: Errore di I/O
efax: 56:09 Error: fax device write: Errore di I/O
efax: 56:09 waiting 2,0 s
efax: 56:11 command "Q0V1"
efax: 56:11 Error: fax device write: Errore di I/O
efax: 56:11 waiting 2,0 s
efax: 56:13 Error: sync: modem not responding
efax: 56:13 Error: tcgetattr on fd=3 failed: Errore di I/O
efax: 56:13 read HDB pid 3228 [ 3228<LF>] from /var/lock/LCK..ttyS1
(our pid)
efax: 56:13 removed lock file /var/lock/LCK..ttyS1
efax: 56:13 done, returning 2 (unrecoverable error)
There were errors (see T00390522382185.efax.log).
brennero@brennero-desktop:~$ cat /boot/grub/mem
memdisk.mod memrw.mod

From forum: Linux Winmodem Support - Discussion

Re: Davide - Italy - kernel 2.6.68-11 generic

2009-11-21T13:32:13Z

Marv, et all,

Forgot to attach debug messages from running
# slmodemd -c USA /dev/slamr0 --debug=2

SmartLink Soft Modem: version 2.9.11 Nov 20 2009 19:20:32
<018.435674> SmartLink Soft Modem: version 2.9.11 Nov 20 2009 19:20:32
<018.435778> slamr0: startup modem...
<018.436363> slamr0: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
modem `slamr0' created. TTY is `/dev/pts/4'
<018.436593> open file: /var/lib/slmodem/data.slamr0...
<018.461167> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.

]0;root@localhost:~ [root@localhost ~]# wvd ial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.<021.728229> main: termios changed.
<021.728245> slamr0: update termios...

--> Initializing modem.
<021.788221> main: termios changed.
<021.788230> slamr0: update termios...
--> Sending: ATZ
<021.890242> slamr0: run cmd: ATZ
<021.890251> slamr0: modem reset...
<021.890256> slamr0: modem set state: 1 --> 1...
<021.890263> slamr0: modem set mode: -> 0...
<021.890269> slamr0: modem report result: 0 (OK)
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
<021.992309> slamr0: run cmd: ATQ0V1E1S0=0X3&C1&D2+MS=90
<021.992332> slamr0: modem report result: 0 (OK)
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
OK
--> Modem initialized.
--> Sending: ATDT7072000
--> Waiting for carrier.
<022.094255> slamr0: run cmd: ATDT7072000
<022.094264> slamr0: modem dial: T7072000...
<022.094270> slamr0: modem_dial_start...
<022.094276> call: create...
<022.094284> CallProgFP_Create >>
<022.094290> APPLY_FILTER = 0
<022.094296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.094303> ============> 6
<022.094308> Cadence: Busy Tone loose detection is 0

<022.094314> TYPE BUSY
<022.094319> Filter index 6
<022.094334> Filter SubIndex 0
<022.094339> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<022.094345> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<022.094351> OFF_TIME_THAT_RESETS_CYCLE 90
<022.094356> BUFFER LENGTH 160 samples.
<022.094362> INTEGRATION_LENGTH 0[ms]
<022.094367> LEVEL 96
<022.094374> INTEGRATION_TIME = 0 Buffers.
<022.094380> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.094387> TYPE DIAL
<022.094392> Filter index 5
<022.094397> Filter SubIndex 0
<022.094401> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<022.094407> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<022.094413> OFF_TIME_THAT_RESETS_CYCLE 0
<022.094418> BUFFER LENGTH 666 samples.
<022.094424> INTEGRATION_LENGTH 2500[ms]
<022.094429> LEVEL 96
<022.094435> INTEGRATION_TIME = 28 Buffers.
<022.094441> CALLPROG Create <<
<022.094447> CALLPROG Dialing T7072000
<022.094453> Configuration->tone_DigitLength 100
<022.094459> Configuration->pulse_OffHookTime 36
<022.094464> Configuration->pulse_OnHookTime 64
<022.094469> Configuration->dialPauseTime 2
<022.094474> Configuration->flashTime 50
<022.094479> Configuration->toneOrPulseFlag 0
<022.094486> Configuration->dialModifierValidationFlag 0
<022.094491> Configuration->ABCD_PermittedFlag 0
<022.094496> Configuration->pulseAndToneInSameStringPermittedFlag 0
<022.094502> Configuration->callingToneFlag 0
<022.094508> Configuration->commaPauseDurLimit 255
<022.094513> Configuration->digitPattern 1
<022.094518> Configuration->tone_BetweenDigitsInterval 100
<022.094523> Configuration->pulse_BetweenDigitsInterval 800
<022.094529> DTMF_Gain1 = 13014
<022.094535> DTMF_Gain2 = 16384
<022.094540> AnalyzeDialString: Updated 17 May 1999 00:50
<022.094546> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<022.094551> Dial String Syntax is VALID
<022.094558> GetNoAnswerTimeOut. 60
<022.094564> WAIT DIAL TIMEOUT = 5
<022.094569> CALLPROG_Dial was exited.
<022.094574> call: create RC: 9600 <-> 8000...
<022.094582> slamr0: modem_start..
<022.094587> slamr0: modem set state: 1 --> 2...
<022.094593> slamr0: new state: DP_ESTAB
<022.094599> main: modemap_ioctl: cmd 8, arg 3...
<022.094610> slamr0: modem set hook: 0 --> 1...
<022.094616> main: modemap_ioctl: cmd 2, arg 1...
<022.094625> err: slamr0: modem start = -1: cannot start device.
<022.094631> slamr0: modem_stop..
<022.094636> slamr0: modem set hook: 0 --> 0...
<022.094642> main: modemap_ioctl: cmd 8, arg 0...
<022.094649> call: delete...
<022.094654> Dialer was aborted.
<022.094660> CALLPROG_Delete is entered
<022.094665> cadence_delete with CADENCE_DIAL_OBJ is invoked
<022.094671> cadence_delete with CADENCE_OBJ is invoked
<022.094676> CALLPROG_Delete is exited
<022.094682> slamr0: modem set state: 2 --> 1...
<022.094689> slamr0: new state: MODEM_IDLE
<022.094694> slamr0: modem report result: 3 (NO CARRIER)
<022.094704> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<022.398259> slamr0: run cmd: ATDT7072000
<022.398268> slamr0: modem dial: T7072000...
<022.398274> slamr0: modem_dial_start...
<022.398279> call: create...
<022.398285> CallProgFP_Create >>
<022.398290> APPLY_FILTER = 0
<022.398296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.398302> ============> 6
<022.398307> Cadence: Busy Tone loose detection is 0

<022.398313> TYPE BUSY
<022.398318> Filter index 6
<022.398327> Filter SubIndex 0
<022.398333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<022.398338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<022.398344> OFF_TIME_THAT_RESETS_CYCLE 90
<022.398349> BUFFER LENGTH 160 samples.
<022.398354> INTEGRATION_LENGTH 0[ms]
<022.398360> LEVEL 96
<022.398366> INTEGRATION_TIME = 0 Buffers.
<022.398372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.398378> TYPE DIAL
<022.398383> Filter index 5
<022.398388> Filter SubIndex 0
<022.398393> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<022.398398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<022.398404> OFF_TIME_THAT_RESETS_CYCLE 0
<022.398409> BUFFER LENGTH 666 samples.
<022.398414> INTEGRATION_LENGTH 2500[ms]
<022.398419> LEVEL 96
<022.398424> INTEGRATION_TIME = 28 Buffers.
<022.398431> CALLPROG Create <<
<022.398436> CALLPROG Dialing T7072000
<022.398442> Configuration->tone_DigitLength 100
<022.398447> Configuration->pulse_OffHookTime 36
<022.398452> Configuration->pulse_OnHookTime 64
<022.398457> Configuration->dialPauseTime 2
<022.398462> Configuration->flashTime 50
<022.398467> Configuration->toneOrPulseFlag 0
<022.398473> Configuration->dialModifierValidationFlag 0
<022.398478> Configuration->ABCD_PermittedFlag 0
<022.398483> Configuration->pulseAndToneInSameStringPermittedFlag 0
<022.398488> Configuration->callingToneFlag 0
<022.398493> Configuration->commaPauseDurLimit 255
<022.398499> Configuration->digitPattern 1
<022.398504> Configuration->tone_BetweenDigitsInterval 100
<022.398509> Configuration->pulse_BetweenDigitsInterval 800
<022.398514> DTMF_Gain1 = 13014
<022.398519> DTMF_Gain2 = 16384
<022.398524> AnalyzeDialString: Updated 17 May 1999 00:50
<022.398530> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<022.398535> Dial String Syntax is VALID
<022.398540> GetNoAnswerTimeOut. 60
<022.398545> WAIT DIAL TIMEOUT = 5
<022.398550> CALLPROG_Dial was exited.
<022.398555> call: create RC: 9600 <-> 8000...
<022.398562> slamr0: modem_start..
<022.398567> slamr0: modem set state: 1 --> 2...
<022.398573> slamr0: new state: DP_ESTAB
<022.398578> main: modemap_ioctl: cmd 8, arg 3...
<022.398585> slamr0: modem set hook: 0 --> 1...
<022.398590> main: modemap_ioctl: cmd 2, arg 1...
<022.398598> err: slamr0: modem start = -1: cannot start device.
<022.398604> slamr0: modem_stop..
<022.398609> slamr0: modem set hook: 0 --> 0...
<022.398615> main: modemap_ioctl: cmd 8, arg 0...
<022.398621> call: delete...
<022.398626> Dialer was aborted.
<022.398630> CALLPROG_Delete is entered
<022.398635> cadence_delete with CADENCE_DIAL_OBJ is invoked
<022.398641> cadence_delete with CADENCE_OBJ is invoked
<022.398646> CALLPROG_Delete is exited
<022.398652> slamr0: modem set state: 2 --> 1...
<022.398658> slamr0: new state: MODEM_IDLE
<022.398663> slamr0: modem report result: 3 (NO CARRIER)
<022.398673> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<022.702258> slamr0: run cmd: ATDT7072000
<022.702268> slamr0: modem dial: T7072000...
<022.702274> slamr0: modem_dial_start...
<022.702279> call: create...
<022.702285> CallProgFP_Create >>
<022.702290> APPLY_FILTER = 0
<022.702296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.702302> ============> 6
<022.702307> Cadence: Busy Tone loose detection is 0

<022.702313> TYPE BUSY
<022.702318> Filter index 6
<022.702327> Filter SubIndex 0
<022.702333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<022.702338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<022.702344> OFF_TIME_THAT_RESETS_CYCLE 90
<022.702349> BUFFER LENGTH 160 samples.
<022.702354> INTEGRATION_LENGTH 0[ms]
<022.702359> LEVEL 96
<022.702366> INTEGRATION_TIME = 0 Buffers.
<022.702372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<022.702378> TYPE DIAL
<022.702382> Filter index 5
<022.702387> Filter SubIndex 0
<022.702392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<022.702397> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<022.702403> OFF_TIME_THAT_RESETS_CYCLE 0
<022.702408> BUFFER LENGTH 666 samples.
<022.702413> INTEGRATION_LENGTH 2500[ms]
<022.702418> LEVEL 96
<022.702423> INTEGRATION_TIME = 28 Buffers.
<022.702429> CALLPROG Create <<
<022.702434> CALLPROG Dialing T7072000
<022.702440> Configuration->tone_DigitLength 100
<022.702445> Configuration->pulse_OffHookTime 36
<022.702450> Configuration->pulse_OnHookTime 64
<022.702456> Configuration->dialPauseTime 2
<022.702461> Configuration->flashTime 50
<022.702466> Configuration->toneOrPulseFlag 0
<022.702471> Configuration->dialModifierValidationFlag 0
<022.702476> Configuration->ABCD_PermittedFlag 0
<022.702481> Configuration->pulseAndToneInSameStringPermittedFlag 0
<022.702486> Configuration->callingToneFlag 0
<022.702492> Configuration->commaPauseDurLimit 255
<022.702497> Configuration->digitPattern 1
<022.702501> Configuration->tone_BetweenDigitsInterval 100
<022.702507> Configuration->pulse_BetweenDigitsInterval 800
<022.702512> DTMF_Gain1 = 13014
<022.702517> DTMF_Gain2 = 16384
<022.702522> AnalyzeDialString: Updated 17 May 1999 00:50
<022.702527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<022.702532> Dial String Syntax is VALID
<022.702538> GetNoAnswerTimeOut. 60
<022.702543> WAIT DIAL TIMEOUT = 5
<022.702548> CALLPROG_Dial was exited.
<022.702553> call: create RC: 9600 <-> 8000...
<022.702559> slamr0: modem_start..
<022.702564> slamr0: modem set state: 1 --> 2...
<022.702570> slamr0: new state: DP_ESTAB
<022.702575> main: modemap_ioctl: cmd 8, arg 3...
<022.702583> slamr0: modem set hook: 0 --> 1...
<022.702588> main: modemap_ioctl: cmd 2, arg 1...
<022.702596> err: slamr0: modem start = -1: cannot start device.
<022.702602> slamr0: modem_stop..
<022.702607> slamr0: modem set hook: 0 --> 0...
<022.702612> main: modemap_ioctl: cmd 8, arg 0...
<022.702619> call: delete...
<022.702623> Dialer was aborted.
<022.702628> CALLPROG_Delete is entered
<022.702633> cadence_delete with CADENCE_DIAL_OBJ is invoked
<022.702639> cadence_delete with CADENCE_OBJ is invoked
<022.702644> CALLPROG_Delete is exited
<022.702649> slamr0: modem set state: 2 --> 1...
<022.702655> slamr0: new state: MODEM_IDLE
<022.702660> slamr0: modem report result: 3 (NO CARRIER)
<022.702670> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<023.006235> slamr0: run cmd: ATDT7072000
<023.006245> slamr0: modem dial: T7072000...
<023.006250> slamr0: modem_dial_start...
<023.006256> call: create...
<023.006262> CallProgFP_Create >>
<023.006267> APPLY_FILTER = 0
<023.006273> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.006279> ============> 6
<023.006284> Cadence: Busy Tone loose detection is 0

<023.006290> TYPE BUSY
<023.006295> Filter index 6
<023.006300> Filter SubIndex 0
<023.006305> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<023.006311> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<023.006317> OFF_TIME_THAT_RESETS_CYCLE 90
<023.006327> BUFFER LENGTH 160 samples.
<023.006333> INTEGRATION_LENGTH 0[ms]
<023.006338> LEVEL 96
<023.006345> INTEGRATION_TIME = 0 Buffers.
<023.006351> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.006357> TYPE DIAL
<023.006362> Filter index 5
<023.006367> Filter SubIndex 0
<023.006372> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<023.006377> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<023.006383> OFF_TIME_THAT_RESETS_CYCLE 0
<023.006388> BUFFER LENGTH 666 samples.
<023.006393> INTEGRATION_LENGTH 2500[ms]
<023.006398> LEVEL 96
<023.006404> INTEGRATION_TIME = 28 Buffers.
<023.006410> CALLPROG Create <<
<023.006415> CALLPROG Dialing T7072000
<023.006421> Configuration->tone_DigitLength 100
<023.006426> Configuration->pulse_OffHookTime 36
<023.006432> Configuration->pulse_OnHookTime 64
<023.006437> Configuration->dialPauseTime 2
<023.006442> Configuration->flashTime 50
<023.006447> Configuration->toneOrPulseFlag 0
<023.006453> Configuration->dialModifierValidationFlag 0
<023.006458> Configuration->ABCD_PermittedFlag 0
<023.006463> Configuration->pulseAndToneInSameStringPermittedFlag 0
<023.006469> Configuration->callingToneFlag 0
<023.006474> Configuration->commaPauseDurLimit 255
<023.006479> Configuration->digitPattern 1
<023.006484> Configuration->tone_BetweenDigitsInterval 100
<023.006490> Configuration->pulse_BetweenDigitsInterval 800
<023.006495> DTMF_Gain1 = 13014
<023.006500> DTMF_Gain2 = 16384
<023.006506> AnalyzeDialString: Updated 17 May 1999 00:50
<023.006511> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<023.006516> Dial String Syntax is VALID
<023.006522> GetNoAnswerTimeOut. 60
<023.006527> WAIT DIAL TIMEOUT = 5
<023.006532> CALLPROG_Dial was exited.
<023.006537> call: create RC: 9600 <-> 8000...
<023.006544> slamr0: modem_start..
<023.006549> slamr0: modem set state: 1 --> 2...
<023.006555> slamr0: new state: DP_ESTAB
<023.006560> main: modemap_ioctl: cmd 8, arg 3...
<023.006627> slamr0: modem set hook: 0 --> 1...
<023.006633> main: modemap_ioctl: cmd 2, arg 1...
<023.006640> err: slamr0: modem start = -1: cannot start device.
<023.006647> slamr0: modem_stop..
<023.006652> slamr0: modem set hook: 0 --> 0...
<023.006657> main: modemap_ioctl: cmd 8, arg 0...
<023.006664> call: delete...
<023.006669> Dialer was aborted.
<023.006673> CALLPROG_Delete is entered
<023.006678> cadence_delete with CADENCE_DIAL_OBJ is invoked
<023.006684> cadence_delete with CADENCE_OBJ is invoked
<023.006689> CALLPROG_Delete is exited
<023.006695> slamr0: modem set state: 2 --> 1...
<023.006701> slamr0: new state: MODEM_IDLE
<023.006706> slamr0: modem report result: 3 (NO CARRIER)
<023.006716> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<023.310259> slamr0: run cmd: ATDT7072000
<023.310269> slamr0: modem dial: T7072000...
<023.310274> slamr0: modem_dial_start...
<023.310280> call: create...
<023.310286> CallProgFP_Create >>
<023.310291> APPLY_FILTER = 0
<023.310296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.310303> ============> 6
<023.310308> Cadence: Busy Tone loose detection is 0

<023.310314> TYPE BUSY
<023.310319> Filter index 6
<023.310329> Filter SubIndex 0
<023.310334> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<023.310339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<023.310345> OFF_TIME_THAT_RESETS_CYCLE 90
<023.310350> BUFFER LENGTH 160 samples.
<023.310356> INTEGRATION_LENGTH 0[ms]
<023.310361> LEVEL 96
<023.310367> INTEGRATION_TIME = 0 Buffers.
<023.310373> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.310379> TYPE DIAL
<023.310384> Filter index 5
<023.310389> Filter SubIndex 0
<023.310393> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<023.310399> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<023.310404> OFF_TIME_THAT_RESETS_CYCLE 0
<023.310409> BUFFER LENGTH 666 samples.
<023.310414> INTEGRATION_LENGTH 2500[ms]
<023.310419> LEVEL 96
<023.310425> INTEGRATION_TIME = 28 Buffers.
<023.310431> CALLPROG Create <<
<023.310436> CALLPROG Dialing T7072000
<023.310442> Configuration->tone_DigitLength 100
<023.310447> Configuration->pulse_OffHookTime 36
<023.310452> Configuration->pulse_OnHookTime 64
<023.310457> Configuration->dialPauseTime 2
<023.310462> Configuration->flashTime 50
<023.310467> Configuration->toneOrPulseFlag 0
<023.310472> Configuration->dialModifierValidationFlag 0
<023.310478> Configuration->ABCD_PermittedFlag 0
<023.310483> Configuration->pulseAndToneInSameStringPermittedFlag 0
<023.310488> Configuration->callingToneFlag 0
<023.310493> Configuration->commaPauseDurLimit 255
<023.310499> Configuration->digitPattern 1
<023.310504> Configuration->tone_BetweenDigitsInterval 100
<023.310509> Configuration->pulse_BetweenDigitsInterval 800
<023.310514> DTMF_Gain1 = 13014
<023.310519> DTMF_Gain2 = 16384
<023.310524> AnalyzeDialString: Updated 17 May 1999 00:50
<023.310530> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<023.310535> Dial String Syntax is VALID
<023.310540> GetNoAnswerTimeOut. 60
<023.310545> WAIT DIAL TIMEOUT = 5
<023.310550> CALLPROG_Dial was exited.
<023.310555> call: create RC: 9600 <-> 8000...
<023.310562> slamr0: modem_start..
<023.310567> slamr0: modem set state: 1 --> 2...
<023.310573> slamr0: new state: DP_ESTAB
<023.310578> main: modemap_ioctl: cmd 8, arg 3...
<023.310585> slamr0: modem set hook: 0 --> 1...
<023.310591> main: modemap_ioctl: cmd 2, arg 1...
<023.310598> err: slamr0: modem start = -1: cannot start device.
<023.310605> slamr0: modem_stop..
<023.310610> slamr0: modem set hook: 0 --> 0...
<023.310615> main: modemap_ioctl: cmd 8, arg 0...
<023.310621> call: delete...
<023.310626> Dialer was aborted.
<023.310631> CALLPROG_Delete is entered
<023.310636> cadence_delete with CADENCE_DIAL_OBJ is invoked
<023.310642> cadence_delete with CADENCE_OBJ is invoked
<023.310647> CALLPROG_Delete is exited
<023.310652> slamr0: modem set state: 2 --> 1...
<023.310658> slamr0: new state: MODEM_IDLE
<023.310663> slamr0: modem report result: 3 (NO CARRIER)
<023.310674> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<023.614263> slamr0: run cmd: ATDT7072000
<023.614273> slamr0: modem dial: T7072000...
<023.614279> slamr0: modem_dial_start...
<023.614284> call: create...
<023.614291> CallProgFP_Create >>
<023.614296> APPLY_FILTER = 0
<023.614302> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.614308> ============> 6
<023.614313> Cadence: Busy Tone loose detection is 0

<023.614319> TYPE BUSY
<023.614330> Filter index 6
<023.614336> Filter SubIndex 0
<023.614341> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<023.614346> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<023.614352> OFF_TIME_THAT_RESETS_CYCLE 90
<023.614357> BUFFER LENGTH 160 samples.
<023.614362> INTEGRATION_LENGTH 0[ms]
<023.614367> LEVEL 96
<023.614374> INTEGRATION_TIME = 0 Buffers.
<023.614380> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.614386> TYPE DIAL
<023.614390> Filter index 5
<023.614395> Filter SubIndex 0
<023.614400> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<023.614405> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<023.614411> OFF_TIME_THAT_RESETS_CYCLE 0
<023.614416> BUFFER LENGTH 666 samples.
<023.614421> INTEGRATION_LENGTH 2500[ms]
<023.614426> LEVEL 96
<023.614431> INTEGRATION_TIME = 28 Buffers.
<023.614438> CALLPROG Create <<
<023.614443> CALLPROG Dialing T7072000
<023.614448> Configuration->tone_DigitLength 100
<023.614454> Configuration->pulse_OffHookTime 36
<023.614459> Configuration->pulse_OnHookTime 64
<023.614464> Configuration->dialPauseTime 2
<023.614469> Configuration->flashTime 50
<023.614474> Configuration->toneOrPulseFlag 0
<023.614479> Configuration->dialModifierValidationFlag 0
<023.614484> Configuration->ABCD_PermittedFlag 0
<023.614489> Configuration->pulseAndToneInSameStringPermittedFlag 0
<023.614495> Configuration->callingToneFlag 0
<023.614500> Configuration->commaPauseDurLimit 255
<023.614505> Configuration->digitPattern 1
<023.614510> Configuration->tone_BetweenDigitsInterval 100
<023.614515> Configuration->pulse_BetweenDigitsInterval 800
<023.614521> DTMF_Gain1 = 13014
<023.614525> DTMF_Gain2 = 16384
<023.614531> AnalyzeDialString: Updated 17 May 1999 00:50
<023.614536> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<023.614541> Dial String Syntax is VALID
<023.614546> GetNoAnswerTimeOut. 60
<023.614551> WAIT DIAL TIMEOUT = 5
<023.614556> CALLPROG_Dial was exited.
<023.614561> call: create RC: 9600 <-> 8000...
<023.614568> slamr0: modem_start..
<023.614573> slamr0: modem set state: 1 --> 2...
<023.614579> slamr0: new state: DP_ESTAB
<023.614584> main: modemap_ioctl: cmd 8, arg 3...
<023.614591> slamr0: modem set hook: 0 --> 1...
<023.614597> main: modemap_ioctl: cmd 2, arg 1...
<023.614604> err: slamr0: modem start = -1: cannot start device.
<023.614611> slamr0: modem_stop..
<023.614616> slamr0: modem set hook: 0 --> 0...
<023.614621> main: modemap_ioctl: cmd 8, arg 0...
<023.614628> call: delete...
<023.614632> Dialer was aborted.
<023.614637> CALLPROG_Delete is entered
<023.614642> cadence_delete with CADENCE_DIAL_OBJ is invoked
<023.614647> cadence_delete with CADENCE_OBJ is invoked
<023.614653> CALLPROG_Delete is exited
<023.614658> slamr0: modem set state: 2 --> 1...
<023.614664> slamr0: new state: MODEM_IDLE
<023.614669> slamr0: modem report result: 3 (NO CARRIER)
<023.614679> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<023.918258> slamr0: run cmd: ATDT7072000
<023.918267> slamr0: modem dial: T7072000...
<023.918273> slamr0: modem_dial_start...
<023.918278> call: create...
<023.918284> CallProgFP_Create >>
<023.918289> APPLY_FILTER = 0
<023.918295> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.918301> ============> 6
<023.918306> Cadence: Busy Tone loose detection is 0

<023.918312> TYPE BUSY
<023.918317> Filter index 6
<023.918326> Filter SubIndex 0
<023.918332> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<023.918337> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<023.918343> OFF_TIME_THAT_RESETS_CYCLE 90
<023.918348> BUFFER LENGTH 160 samples.
<023.918353> INTEGRATION_LENGTH 0[ms]
<023.918358> LEVEL 96
<023.918365> INTEGRATION_TIME = 0 Buffers.
<023.918371> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<023.918377> TYPE DIAL
<023.918381> Filter index 5
<023.918386> Filter SubIndex 0
<023.918391> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<023.918397> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<023.918402> OFF_TIME_THAT_RESETS_CYCLE 0
<023.918407> BUFFER LENGTH 666 samples.
<023.918412> INTEGRATION_LENGTH 2500[ms]
<023.918417> LEVEL 96
<023.918422> INTEGRATION_TIME = 28 Buffers.
<023.918429> CALLPROG Create <<
<023.918434> CALLPROG Dialing T7072000
<023.918439> Configuration->tone_DigitLength 100
<023.918445> Configuration->pulse_OffHookTime 36
<023.918450> Configuration->pulse_OnHookTime 64
<023.918455> Configuration->dialPauseTime 2
<023.918460> Configuration->flashTime 50
<023.918465> Configuration->toneOrPulseFlag 0
<023.918470> Configuration->dialModifierValidationFlag 0
<023.918475> Configuration->ABCD_PermittedFlag 0
<023.918480> Configuration->pulseAndToneInSameStringPermittedFlag 0
<023.918486> Configuration->callingToneFlag 0
<023.918491> Configuration->commaPauseDurLimit 255
<023.918496> Configuration->digitPattern 1
<023.918501> Configuration->tone_BetweenDigitsInterval 100
<023.918506> Configuration->pulse_BetweenDigitsInterval 800
<023.918512> DTMF_Gain1 = 13014
<023.918517> DTMF_Gain2 = 16384
<023.918522> AnalyzeDialString: Updated 17 May 1999 00:50
<023.918527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<023.918532> Dial String Syntax is VALID
<023.918537> GetNoAnswerTimeOut. 60
<023.918543> WAIT DIAL TIMEOUT = 5
<023.918548> CALLPROG_Dial was exited.
<023.918552> call: create RC: 9600 <-> 8000...
<023.918559> slamr0: modem_start..
<023.918564> slamr0: modem set state: 1 --> 2...
<023.918570> slamr0: new state: DP_ESTAB
<023.918575> main: modemap_ioctl: cmd 8, arg 3...
<023.918582> slamr0: modem set hook: 0 --> 1...
<023.918587> main: modemap_ioctl: cmd 2, arg 1...
<023.918594> err: slamr0: modem start = -1: cannot start device.
<023.918601> slamr0: modem_stop..
<023.918605> slamr0: modem set hook: 0 --> 0...
<023.918611> main: modemap_ioctl: cmd 8, arg 0...
<023.918617> call: delete...
<023.918622> Dialer was aborted.
<023.918627> CALLPROG_Delete is entered
<023.918631> cadence_delete with CADENCE_DIAL_OBJ is invoked
<023.918637> cadence_delete with CADENCE_OBJ is invoked
<023.918642> CALLPROG_Delete is exited
<023.918648> slamr0: modem set state: 2 --> 1...
<023.918653> slamr0: new state: MODEM_IDLE
<023.918658> slamr0: modem report result: 3 (NO CARRIER)
<023.918668> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<024.222257> slamr0: run cmd: ATDT7072000
<024.222268> slamr0: modem dial: T7072000...
<024.222273> slamr0: modem_dial_start...
<024.222279> call: create...
<024.222285> CallProgFP_Create >>
<024.222290> APPLY_FILTER = 0
<024.222296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.222302> ============> 6
<024.222307> Cadence: Busy Tone loose detection is 0

<024.222313> TYPE BUSY
<024.222318> Filter index 6
<024.222327> Filter SubIndex 0
<024.222333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<024.222339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<024.222344> OFF_TIME_THAT_RESETS_CYCLE 90
<024.222349> BUFFER LENGTH 160 samples.
<024.222355> INTEGRATION_LENGTH 0[ms]
<024.222360> LEVEL 96
<024.222366> INTEGRATION_TIME = 0 Buffers.
<024.222372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.222378> TYPE DIAL
<024.222383> Filter index 5
<024.222388> Filter SubIndex 0
<024.222393> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<024.222398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<024.222404> OFF_TIME_THAT_RESETS_CYCLE 0
<024.222409> BUFFER LENGTH 666 samples.
<024.222414> INTEGRATION_LENGTH 2500[ms]
<024.222419> LEVEL 96
<024.222424> INTEGRATION_TIME = 28 Buffers.
<024.222431> CALLPROG Create <<
<024.222436> CALLPROG Dialing T7072000
<024.222441> Configuration->tone_DigitLength 100
<024.222447> Configuration->pulse_OffHookTime 36
<024.222452> Configuration->pulse_OnHookTime 64
<024.222457> Configuration->dialPauseTime 2
<024.222462> Configuration->flashTime 50
<024.222467> Configuration->toneOrPulseFlag 0
<024.222472> Configuration->dialModifierValidationFlag 0
<024.222477> Configuration->ABCD_PermittedFlag 0
<024.222482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<024.222488> Configuration->callingToneFlag 0
<024.222493> Configuration->commaPauseDurLimit 255
<024.222498> Configuration->digitPattern 1
<024.222503> Configuration->tone_BetweenDigitsInterval 100
<024.222508> Configuration->pulse_BetweenDigitsInterval 800
<024.222514> DTMF_Gain1 = 13014
<024.222519> DTMF_Gain2 = 16384
<024.222524> AnalyzeDialString: Updated 17 May 1999 00:50
<024.222529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<024.222534> Dial String Syntax is VALID
<024.222540> GetNoAnswerTimeOut. 60
<024.222545> WAIT DIAL TIMEOUT = 5
<024.222550> CALLPROG_Dial was exited.
<024.222555> call: create RC: 9600 <-> 8000...
<024.222562> slamr0: modem_start..
<024.222567> slamr0: modem set state: 1 --> 2...
<024.222573> slamr0: new state: DP_ESTAB
<024.222578> main: modemap_ioctl: cmd 8, arg 3...
<024.222585> slamr0: modem set hook: 0 --> 1...
<024.222591> main: modemap_ioctl: cmd 2, arg 1...
<024.222599> err: slamr0: modem start = -1: cannot start device.
<024.222605> slamr0: modem_stop..
<024.222610> slamr0: modem set hook: 0 --> 0...
<024.222616> main: modemap_ioctl: cmd 8, arg 0...
<024.222622> call: delete...
<024.222627> Dialer was aborted.
<024.222632> CALLPROG_Delete is entered
<024.222636> cadence_delete with CADENCE_DIAL_OBJ is invoked
<024.222642> cadence_delete with CADENCE_OBJ is invoked
<024.222647> CALLPROG_Delete is exited
<024.222653> slamr0: modem set state: 2 --> 1...
<024.222658> slamr0: new state: MODEM_IDLE
<024.222663> slamr0: modem report result: 3 (NO CARRIER)
<024.222674> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<024.526258> slamr0: run cmd: ATDT7072000
<024.526268> slamr0: modem dial: T7072000...
<024.526274> slamr0: modem_dial_start...
<024.526279> call: create...
<024.526285> CallProgFP_Create >>
<024.526291> APPLY_FILTER = 0
<024.526296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.526302> ============> 6
<024.526307> Cadence: Busy Tone loose detection is 0

<024.526313> TYPE BUSY
<024.526318> Filter index 6
<024.526328> Filter SubIndex 0
<024.526333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<024.526339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<024.526345> OFF_TIME_THAT_RESETS_CYCLE 90
<024.526350> BUFFER LENGTH 160 samples.
<024.526355> INTEGRATION_LENGTH 0[ms]
<024.526360> LEVEL 96
<024.526367> INTEGRATION_TIME = 0 Buffers.
<024.526373> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.526379> TYPE DIAL
<024.526383> Filter index 5
<024.526388> Filter SubIndex 0
<024.526393> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<024.526398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<024.526404> OFF_TIME_THAT_RESETS_CYCLE 0
<024.526409> BUFFER LENGTH 666 samples.
<024.526414> INTEGRATION_LENGTH 2500[ms]
<024.526419> LEVEL 96
<024.526424> INTEGRATION_TIME = 28 Buffers.
<024.526431> CALLPROG Create <<
<024.526435> CALLPROG Dialing T7072000
<024.526441> Configuration->tone_DigitLength 100
<024.526446> Configuration->pulse_OffHookTime 36
<024.526451> Configuration->pulse_OnHookTime 64
<024.526456> Configuration->dialPauseTime 2
<024.526462> Configuration->flashTime 50
<024.526466> Configuration->toneOrPulseFlag 0
<024.526471> Configuration->dialModifierValidationFlag 0
<024.526477> Configuration->ABCD_PermittedFlag 0
<024.526482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<024.526487> Configuration->callingToneFlag 0
<024.526492> Configuration->commaPauseDurLimit 255
<024.526498> Configuration->digitPattern 1
<024.526503> Configuration->tone_BetweenDigitsInterval 100
<024.526508> Configuration->pulse_BetweenDigitsInterval 800
<024.526513> DTMF_Gain1 = 13014
<024.526518> DTMF_Gain2 = 16384
<024.526523> AnalyzeDialString: Updated 17 May 1999 00:50
<024.526529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<024.526534> Dial String Syntax is VALID
<024.526539> GetNoAnswerTimeOut. 60
<024.526544> WAIT DIAL TIMEOUT = 5
<024.526549> CALLPROG_Dial was exited.
<024.526554> call: create RC: 9600 <-> 8000...
<024.526561> slamr0: modem_start..
<024.526566> slamr0: modem set state: 1 --> 2...
<024.526571> slamr0: new state: DP_ESTAB
<024.526576> main: modemap_ioctl: cmd 8, arg 3...
<024.526584> slamr0: modem set hook: 0 --> 1...
<024.526590> main: modemap_ioctl: cmd 2, arg 1...
<024.526598> err: slamr0: modem start = -1: cannot start device.
<024.526604> slamr0: modem_stop..
<024.526609> slamr0: modem set hook: 0 --> 0...
<024.526615> main: modemap_ioctl: cmd 8, arg 0...
<024.526621> call: delete...
<024.526626> Dialer was aborted.
<024.526631> CALLPROG_Delete is entered
<024.526635> cadence_delete with CADENCE_DIAL_OBJ is invoked
<024.526641> cadence_delete with CADENCE_OBJ is invoked
<024.526646> CALLPROG_Delete is exited
<024.526652> slamr0: modem set state: 2 --> 1...
<024.526658> slamr0: new state: MODEM_IDLE
<024.526663> slamr0: modem report result: 3 (NO CARRIER)
<024.526673> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<024.830258> slamr0: run cmd: ATDT7072000
<024.830268> slamr0: modem dial: T7072000...
<024.830273> slamr0: modem_dial_start...
<024.830278> call: create...
<024.830285> CallProgFP_Create >>
<024.830290> APPLY_FILTER = 0
<024.830296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.830302> ============> 6
<024.830307> Cadence: Busy Tone loose detection is 0

<024.830313> TYPE BUSY
<024.830317> Filter index 6
<024.830327> Filter SubIndex 0
<024.830333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<024.830338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<024.830344> OFF_TIME_THAT_RESETS_CYCLE 90
<024.830349> BUFFER LENGTH 160 samples.
<024.830354> INTEGRATION_LENGTH 0[ms]
<024.830359> LEVEL 96
<024.830365> INTEGRATION_TIME = 0 Buffers.
<024.830371> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<024.830377> TYPE DIAL
<024.830382> Filter index 5
<024.830387> Filter SubIndex 0
<024.830392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<024.830397> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<024.830402> OFF_TIME_THAT_RESETS_CYCLE 0
<024.830408> BUFFER LENGTH 666 samples.
<024.830413> INTEGRATION_LENGTH 2500[ms]
<024.830418> LEVEL 96
<024.830423> INTEGRATION_TIME = 28 Buffers.
<024.830429> CALLPROG Create <<
<024.830434> CALLPROG Dialing T7072000
<024.830440> Configuration->tone_DigitLength 100
<024.830445> Configuration->pulse_OffHookTime 36
<024.830450> Configuration->pulse_OnHookTime 64
<024.830455> Configuration->dialPauseTime 2
<024.830460> Configuration->flashTime 50
<024.830465> Configuration->toneOrPulseFlag 0
<024.830470> Configuration->dialModifierValidationFlag 0
<024.830475> Configuration->ABCD_PermittedFlag 0
<024.830480> Configuration->pulseAndToneInSameStringPermittedFlag 0
<024.830486> Configuration->callingToneFlag 0
<024.830491> Configuration->commaPauseDurLimit 255
<024.830496> Configuration->digitPattern 1
<024.830501> Configuration->tone_BetweenDigitsInterval 100
<024.830507> Configuration->pulse_BetweenDigitsInterval 800
<024.830512> DTMF_Gain1 = 13014
<024.830517> DTMF_Gain2 = 16384
<024.830522> AnalyzeDialString: Updated 17 May 1999 00:50
<024.830527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<024.830532> Dial String Syntax is VALID
<024.830538> GetNoAnswerTimeOut. 60
<024.830543> WAIT DIAL TIMEOUT = 5
<024.830548> CALLPROG_Dial was exited.
<024.830553> call: create RC: 9600 <-> 8000...
<024.830559> slamr0: modem_start..
<024.830564> slamr0: modem set state: 1 --> 2...
<024.830570> slamr0: new state: DP_ESTAB
<024.830575> main: modemap_ioctl: cmd 8, arg 3...
<024.830582> slamr0: modem set hook: 0 --> 1...
<024.830588> main: modemap_ioctl: cmd 2, arg 1...
<024.830596> err: slamr0: modem start = -1: cannot start device.
<024.830602> slamr0: modem_stop..
<024.830607> slamr0: modem set hook: 0 --> 0...
<024.830612> main: modemap_ioctl: cmd 8, arg 0...
<024.830618> call: delete...
<024.830623> Dialer was aborted.
<024.830628> CALLPROG_Delete is entered
<024.830633> cadence_delete with CADENCE_DIAL_OBJ is invoked
<024.830639> cadence_delete with CADENCE_OBJ is invoked
<024.830644> CALLPROG_Delete is exited
<024.830650> slamr0: modem set state: 2 --> 1...
<024.830655> slamr0: new state: MODEM_IDLE
<024.830660> slamr0: modem report result: 3 (NO CARRIER)
<024.830670> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<025.134260> slamr0: run cmd: ATDT7072000
<025.134269> slamr0: modem dial: T7072000...
<025.134275> slamr0: modem_dial_start...
<025.134280> call: create...
<025.134286> CallProgFP_Create >>
<025.134291> APPLY_FILTER = 0
<025.134297> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.134303> ============> 6
<025.134308> Cadence: Busy Tone loose detection is 0

<025.134314> TYPE BUSY
<025.134319> Filter index 6
<025.134331> Filter SubIndex 0
<025.134336> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<025.134342> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<025.134347> OFF_TIME_THAT_RESETS_CYCLE 90
<025.134353> BUFFER LENGTH 160 samples.
<025.134358> INTEGRATION_LENGTH 0[ms]
<025.134363> LEVEL 96
<025.134369> INTEGRATION_TIME = 0 Buffers.
<025.134375> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.134381> TYPE DIAL
<025.134386> Filter index 5
<025.134391> Filter SubIndex 0
<025.134396> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<025.134401> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<025.134406> OFF_TIME_THAT_RESETS_CYCLE 0
<025.134412> BUFFER LENGTH 666 samples.
<025.134417> INTEGRATION_LENGTH 2500[ms]
<025.134422> LEVEL 96
<025.134427> INTEGRATION_TIME = 28 Buffers.
<025.134434> CALLPROG Create <<
<025.134439> CALLPROG Dialing T7072000
<025.134444> Configuration->tone_DigitLength 100
<025.134450> Configuration->pulse_OffHookTime 36
<025.134455> Configuration->pulse_OnHookTime 64
<025.134460> Configuration->dialPauseTime 2
<025.134465> Configuration->flashTime 50
<025.134470> Configuration->toneOrPulseFlag 0
<025.134475> Configuration->dialModifierValidationFlag 0
<025.134480> Configuration->ABCD_PermittedFlag 0
<025.134485> Configuration->pulseAndToneInSameStringPermittedFlag 0
<025.134491> Configuration->callingToneFlag 0
<025.134496> Configuration->commaPauseDurLimit 255
<025.134501> Configuration->digitPattern 1
<025.134506> Configuration->tone_BetweenDigitsInterval 100
<025.134511> Configuration->pulse_BetweenDigitsInterval 800
<025.134516> DTMF_Gain1 = 13014
<025.134521> DTMF_Gain2 = 16384
<025.134526> AnalyzeDialString: Updated 17 May 1999 00:50
<025.134532> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<025.134537> Dial String Syntax is VALID
<025.134542> GetNoAnswerTimeOut. 60
<025.134547> WAIT DIAL TIMEOUT = 5
<025.134552> CALLPROG_Dial was exited.
<025.134557> call: create RC: 9600 <-> 8000...
<025.134564> slamr0: modem_start..
<025.134569> slamr0: modem set state: 1 --> 2...
<025.134575> slamr0: new state: DP_ESTAB
<025.134580> main: modemap_ioctl: cmd 8, arg 3...
<025.134587> slamr0: modem set hook: 0 --> 1...
<025.134593> main: modemap_ioctl: cmd 2, arg 1...
<025.134600> err: slamr0: modem start = -1: cannot start device.
<025.134607> slamr0: modem_stop..
<025.134611> slamr0: modem set hook: 0 --> 0...
<025.134617> main: modemap_ioctl: cmd 8, arg 0...
<025.134623> call: delete...
<025.134628> Dialer was aborted.
<025.134632> CALLPROG_Delete is entered
<025.134637> cadence_delete with CADENCE_DIAL_OBJ is invoked
<025.134643> cadence_delete with CADENCE_OBJ is invoked
<025.134648> CALLPROG_Delete is exited
<025.134654> slamr0: modem set state: 2 --> 1...
<025.134660> slamr0: new state: MODEM_IDLE
<025.134665> slamr0: modem report result: 3 (NO CARRIER)
<025.134674> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<025.438258> slamr0: run cmd: ATDT7072000
<025.438268> slamr0: modem dial: T7072000...
<025.438274> slamr0: modem_dial_start...
<025.438279> call: create...
<025.438286> CallProgFP_Create >>
<025.438291> APPLY_FILTER = 0
<025.438296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.438302> ============> 6
<025.438307> Cadence: Busy Tone loose detection is 0

<025.438313> TYPE BUSY
<025.438318> Filter index 6
<025.438328> Filter SubIndex 0
<025.438333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<025.438339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<025.438344> OFF_TIME_THAT_RESETS_CYCLE 90
<025.438349> BUFFER LENGTH 160 samples.
<025.438354> INTEGRATION_LENGTH 0[ms]
<025.438359> LEVEL 96
<025.438366> INTEGRATION_TIME = 0 Buffers.
<025.438372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.438378> TYPE DIAL
<025.438382> Filter index 5
<025.438387> Filter SubIndex 0
<025.438392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<025.438398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<025.438403> OFF_TIME_THAT_RESETS_CYCLE 0
<025.438408> BUFFER LENGTH 666 samples.
<025.438413> INTEGRATION_LENGTH 2500[ms]
<025.438418> LEVEL 96
<025.438424> INTEGRATION_TIME = 28 Buffers.
<025.438430> CALLPROG Create <<
<025.438435> CALLPROG Dialing T7072000
<025.438441> Configuration->tone_DigitLength 100
<025.438446> Configuration->pulse_OffHookTime 36
<025.438451> Configuration->pulse_OnHookTime 64
<025.438456> Configuration->dialPauseTime 2
<025.438461> Configuration->flashTime 50
<025.438466> Configuration->toneOrPulseFlag 0
<025.438472> Configuration->dialModifierValidationFlag 0
<025.438477> Configuration->ABCD_PermittedFlag 0
<025.438482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<025.438488> Configuration->callingToneFlag 0
<025.438493> Configuration->commaPauseDurLimit 255
<025.438498> Configuration->digitPattern 1
<025.438503> Configuration->tone_BetweenDigitsInterval 100
<025.438508> Configuration->pulse_BetweenDigitsInterval 800
<025.438514> DTMF_Gain1 = 13014
<025.438518> DTMF_Gain2 = 16384
<025.438524> AnalyzeDialString: Updated 17 May 1999 00:50
<025.438529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<025.438534> Dial String Syntax is VALID
<025.438539> GetNoAnswerTimeOut. 60
<025.438545> WAIT DIAL TIMEOUT = 5
<025.438550> CALLPROG_Dial was exited.
<025.438555> call: create RC: 9600 <-> 8000...
<025.438561> slamr0: modem_start..
<025.438566> slamr0: modem set state: 1 --> 2...
<025.438572> slamr0: new state: DP_ESTAB
<025.438577> main: modemap_ioctl: cmd 8, arg 3...
<025.438584> slamr0: modem set hook: 0 --> 1...
<025.438590> main: modemap_ioctl: cmd 2, arg 1...
<025.438597> err: slamr0: modem start = -1: cannot start device.
<025.438603> slamr0: modem_stop..
<025.438608> slamr0: modem set hook: 0 --> 0...
<025.438613> main: modemap_ioctl: cmd 8, arg 0...
<025.438619> call: delete...
<025.438624> Dialer was aborted.
<025.438629> CALLPROG_Delete is entered
<025.438634> cadence_delete with CADENCE_DIAL_OBJ is invoked
<025.438639> cadence_delete with CADENCE_OBJ is invoked
<025.438645> CALLPROG_Delete is exited
<025.438650> slamr0: modem set state: 2 --> 1...
<025.438656> slamr0: new state: MODEM_IDLE
<025.438661> slamr0: modem report result: 3 (NO CARRIER)
<025.438671> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<025.742260> slamr0: run cmd: ATDT7072000
<025.742270> slamr0: modem dial: T7072000...
<025.742275> slamr0: modem_dial_start...
<025.742280> call: create...
<025.742286> CallProgFP_Create >>
<025.742291> APPLY_FILTER = 0
<025.742297> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.742303> ============> 6
<025.742308> Cadence: Busy Tone loose detection is 0

<025.742313> TYPE BUSY
<025.742318> Filter index 6
<025.742328> Filter SubIndex 0
<025.742333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<025.742339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<025.742344> OFF_TIME_THAT_RESETS_CYCLE 90
<025.742350> BUFFER LENGTH 160 samples.
<025.742355> INTEGRATION_LENGTH 0[ms]
<025.742360> LEVEL 96
<025.742366> INTEGRATION_TIME = 0 Buffers.
<025.742372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<025.742378> TYPE DIAL
<025.742383> Filter index 5
<025.742388> Filter SubIndex 0
<025.742392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<025.742398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<025.742403> OFF_TIME_THAT_RESETS_CYCLE 0
<025.742408> BUFFER LENGTH 666 samples.
<025.742413> INTEGRATION_LENGTH 2500[ms]
<025.742418> LEVEL 96
<025.742423> INTEGRATION_TIME = 28 Buffers.
<025.742430> CALLPROG Create <<
<025.742435> CALLPROG Dialing T7072000
<025.742440> Configuration->tone_DigitLength 100
<025.742446> Configuration->pulse_OffHookTime 36
<025.742451> Configuration->pulse_OnHookTime 64
<025.742456> Configuration->dialPauseTime 2
<025.742461> Configuration->flashTime 50
<025.742466> Configuration->toneOrPulseFlag 0
<025.742471> Configuration->dialModifierValidationFlag 0
<025.742476> Configuration->ABCD_PermittedFlag 0
<025.742481> Configuration->pulseAndToneInSameStringPermittedFlag 0
<025.742487> Configuration->callingToneFlag 0
<025.742492> Configuration->commaPauseDurLimit 255
<025.742497> Configuration->digitPattern 1
<025.742502> Configuration->tone_BetweenDigitsInterval 100
<025.742507> Configuration->pulse_BetweenDigitsInterval 800
<025.742512> DTMF_Gain1 = 13014
<025.742517> DTMF_Gain2 = 16384
<025.742522> AnalyzeDialString: Updated 17 May 1999 00:50
<025.742528> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<025.742533> Dial String Syntax is VALID
<025.742538> GetNoAnswerTimeOut. 60
<025.742543> WAIT DIAL TIMEOUT = 5
<025.742548> CALLPROG_Dial was exited.
<025.742553> call: create RC: 9600 <-> 8000...
<025.742559> slamr0: modem_start..
<025.742564> slamr0: modem set state: 1 --> 2...
<025.742570> slamr0: new state: DP_ESTAB
<025.742575> main: modemap_ioctl: cmd 8, arg 3...
<025.742582> slamr0: modem set hook: 0 --> 1...
<025.742588> main: modemap_ioctl: cmd 2, arg 1...
<025.742595> err: slamr0: modem start = -1: cannot start device.
<025.742601> slamr0: modem_stop..
<025.742606> slamr0: modem set hook: 0 --> 0...
<025.742611> main: modemap_ioctl: cmd 8, arg 0...
<025.742618> call: delete...
<025.742622> Dialer was aborted.
<025.742627> CALLPROG_Delete is entered
<025.742632> cadence_delete with CADENCE_DIAL_OBJ is invoked
<025.742637> cadence_delete with CADENCE_OBJ is invoked
<025.742643> CALLPROG_Delete is exited
<025.742648> slamr0: modem set state: 2 --> 1...
<025.742654> slamr0: new state: MODEM_IDLE
<025.742659> slamr0: modem report result: 3 (NO CARRIER)
<025.742669> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<026.046258> slamr0: run cmd: ATDT7072000
<026.046268> slamr0: modem dial: T7072000...
<026.046273> slamr0: modem_dial_start...
<026.046279> call: create...
<026.046285> CallProgFP_Create >>
<026.046290> APPLY_FILTER = 0
<026.046295> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.046301> ============> 6
<026.046306> Cadence: Busy Tone loose detection is 0

<026.046312> TYPE BUSY
<026.046317> Filter index 6
<026.046327> Filter SubIndex 0
<026.046333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<026.046338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<026.046344> OFF_TIME_THAT_RESETS_CYCLE 90
<026.046349> BUFFER LENGTH 160 samples.
<026.046354> INTEGRATION_LENGTH 0[ms]
<026.046359> LEVEL 96
<026.046366> INTEGRATION_TIME = 0 Buffers.
<026.046372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.046378> TYPE DIAL
<026.046383> Filter index 5
<026.046388> Filter SubIndex 0
<026.046392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<026.046398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<026.046403> OFF_TIME_THAT_RESETS_CYCLE 0
<026.046408> BUFFER LENGTH 666 samples.
<026.046414> INTEGRATION_LENGTH 2500[ms]
<026.046419> LEVEL 96
<026.046424> INTEGRATION_TIME = 28 Buffers.
<026.046431> CALLPROG Create <<
<026.046436> CALLPROG Dialing T7072000
<026.046441> Configuration->tone_DigitLength 100
<026.046447> Configuration->pulse_OffHookTime 36
<026.046452> Configuration->pulse_OnHookTime 64
<026.046457> Configuration->dialPauseTime 2
<026.046462> Configuration->flashTime 50
<026.046467> Configuration->toneOrPulseFlag 0
<026.046472> Configuration->dialModifierValidationFlag 0
<026.046477> Configuration->ABCD_PermittedFlag 0
<026.046482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<026.046488> Configuration->callingToneFlag 0
<026.046493> Configuration->commaPauseDurLimit 255
<026.046498> Configuration->digitPattern 1
<026.046503> Configuration->tone_BetweenDigitsInterval 100
<026.046509> Configuration->pulse_BetweenDigitsInterval 800
<026.046514> DTMF_Gain1 = 13014
<026.046519> DTMF_Gain2 = 16384
<026.046524> AnalyzeDialString: Updated 17 May 1999 00:50
<026.046529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<026.046535> Dial String Syntax is VALID
<026.046540> GetNoAnswerTimeOut. 60
<026.046545> WAIT DIAL TIMEOUT = 5
<026.046550> CALLPROG_Dial was exited.
<026.046555> call: create RC: 9600 <-> 8000...
<026.046562> slamr0: modem_start..
<026.046567> slamr0: modem set state: 1 --> 2...
<026.046573> slamr0: new state: DP_ESTAB
<026.046578> main: modemap_ioctl: cmd 8, arg 3...
<026.046585> slamr0: modem set hook: 0 --> 1...
<026.046590> main: modemap_ioctl: cmd 2, arg 1...
<026.046598> err: slamr0: modem start = -1: cannot start device.
<026.046604> slamr0: modem_stop..
<026.046609> slamr0: modem set hook: 0 --> 0...
<026.046614> main: modemap_ioctl: cmd 8, arg 0...
<026.046620> call: delete...
<026.046625> Dialer was aborted.
<026.046630> CALLPROG_Delete is entered
<026.046635> cadence_delete with CADENCE_DIAL_OBJ is invoked
<026.046640> cadence_delete with CADENCE_OBJ is invoked
<026.046646> CALLPROG_Delete is exited
<026.046651> slamr0: modem set state: 2 --> 1...
<026.046657> slamr0: new state: MODEM_IDLE
<026.046662> slamr0: modem report result: 3 (NO CARRIER)
<026.046672> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<026.350258> slamr0: run cmd: ATDT7072000
<026.350266> slamr0: modem dial: T7072000...
<026.350272> slamr0: modem_dial_start...
<026.350277> call: create...
<026.350283> CallProgFP_Create >>
<026.350288> APPLY_FILTER = 0
<026.350294> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.350300> ============> 6
<026.350305> Cadence: Busy Tone loose detection is 0

<026.350311> TYPE BUSY
<026.350315> Filter index 6
<026.350320> Filter SubIndex 0
<026.350331> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<026.350336> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<026.350342> OFF_TIME_THAT_RESETS_CYCLE 90
<026.350347> BUFFER LENGTH 160 samples.
<026.350352> INTEGRATION_LENGTH 0[ms]
<026.350357> LEVEL 96
<026.350363> INTEGRATION_TIME = 0 Buffers.
<026.350369> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.350376> TYPE DIAL
<026.350380> Filter index 5
<026.350385> Filter SubIndex 0
<026.350390> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<026.350395> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<026.350401> OFF_TIME_THAT_RESETS_CYCLE 0
<026.350406> BUFFER LENGTH 666 samples.
<026.350411> INTEGRATION_LENGTH 2500[ms]
<026.350416> LEVEL 96
<026.350421> INTEGRATION_TIME = 28 Buffers.
<026.350428> CALLPROG Create <<
<026.350433> CALLPROG Dialing T7072000
<026.350438> Configuration->tone_DigitLength 100
<026.350444> Configuration->pulse_OffHookTime 36
<026.350449> Configuration->pulse_OnHookTime 64
<026.350454> Configuration->dialPauseTime 2
<026.350459> Configuration->flashTime 50
<026.350464> Configuration->toneOrPulseFlag 0
<026.350469> Configuration->dialModifierValidationFlag 0
<026.350475> Configuration->ABCD_PermittedFlag 0
<026.350480> Configuration->pulseAndToneInSameStringPermittedFlag 0
<026.350485> Configuration->callingToneFlag 0
<026.350490> Configuration->commaPauseDurLimit 255
<026.350495> Configuration->digitPattern 1
<026.350500> Configuration->tone_BetweenDigitsInterval 100
<026.350506> Configuration->pulse_BetweenDigitsInterval 800
<026.350511> DTMF_Gain1 = 13014
<026.350516> DTMF_Gain2 = 16384
<026.350521> AnalyzeDialString: Updated 17 May 1999 00:50
<026.350527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<026.350532> Dial String Syntax is VALID
<026.350537> GetNoAnswerTimeOut. 60
<026.350542> WAIT DIAL TIMEOUT = 5
<026.350547> CALLPROG_Dial was exited.
<026.350552> call: create RC: 9600 <-> 8000...
<026.350559> slamr0: modem_start..
<026.350564> slamr0: modem set state: 1 --> 2...
<026.350569> slamr0: new state: DP_ESTAB
<026.350574> main: modemap_ioctl: cmd 8, arg 3...
<026.350581> slamr0: modem set hook: 0 --> 1...
<026.350587> main: modemap_ioctl: cmd 2, arg 1...
<026.350594> err: slamr0: modem start = -1: cannot start device.
<026.350600> slamr0: modem_stop..
<026.350605> slamr0: modem set hook: 0 --> 0...
<026.350611> main: modemap_ioctl: cmd 8, arg 0...
<026.350617> call: delete...
<026.350622> Dialer was aborted.
<026.350627> CALLPROG_Delete is entered
<026.350631> cadence_delete with CADENCE_DIAL_OBJ is invoked
<026.350637> cadence_delete with CADENCE_OBJ is invoked
<026.350642> CALLPROG_Delete is exited
<026.350648> slamr0: modem set state: 2 --> 1...
<026.350654> slamr0: new state: MODEM_IDLE
<026.350659> slamr0: modem report result: 3 (NO CARRIER)
<026.350669> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<026.654262> slamr0: run cmd: ATDT7072000
<026.654270> slamr0: modem dial: T7072000...
<026.654275> slamr0: modem_dial_start...
<026.654281> call: create...
<026.654287> CallProgFP_Create >>
<026.654292> APPLY_FILTER = 0
<026.654297> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.654303> ============> 6
<026.654308> Cadence: Busy Tone loose detection is 0

<026.654314> TYPE BUSY
<026.654318> Filter index 6
<026.654330> Filter SubIndex 0
<026.654335> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<026.654341> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<026.654346> OFF_TIME_THAT_RESETS_CYCLE 90
<026.654352> BUFFER LENGTH 160 samples.
<026.654357> INTEGRATION_LENGTH 0[ms]
<026.654362> LEVEL 96
<026.654368> INTEGRATION_TIME = 0 Buffers.
<026.654374> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.654380> TYPE DIAL
<026.654385> Filter index 5
<026.654389> Filter SubIndex 0
<026.654394> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<026.654399> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<026.654405> OFF_TIME_THAT_RESETS_CYCLE 0
<026.654410> BUFFER LENGTH 666 samples.
<026.654415> INTEGRATION_LENGTH 2500[ms]
<026.654420> LEVEL 96
<026.654425> INTEGRATION_TIME = 28 Buffers.
<026.654432> CALLPROG Create <<
<026.654437> CALLPROG Dialing T7072000
<026.654442> Configuration->tone_DigitLength 100
<026.654448> Configuration->pulse_OffHookTime 36
<026.654453> Configuration->pulse_OnHookTime 64
<026.654458> Configuration->dialPauseTime 2
<026.654463> Configuration->flashTime 50
<026.654468> Configuration->toneOrPulseFlag 0
<026.654473> Configuration->dialModifierValidationFlag 0
<026.654478> Configuration->ABCD_PermittedFlag 0
<026.654483> Configuration->pulseAndToneInSameStringPermittedFlag 0
<026.654489> Configuration->callingToneFlag 0
<026.654494> Configuration->commaPauseDurLimit 255
<026.654499> Configuration->digitPattern 1
<026.654504> Configuration->tone_BetweenDigitsInterval 100
<026.654509> Configuration->pulse_BetweenDigitsInterval 800
<026.654515> DTMF_Gain1 = 13014
<026.654520> DTMF_Gain2 = 16384
<026.654525> AnalyzeDialString: Updated 17 May 1999 00:50
<026.654530> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<026.654535> Dial String Syntax is VALID
<026.654540> GetNoAnswerTimeOut. 60
<026.654546> WAIT DIAL TIMEOUT = 5
<026.654551> CALLPROG_Dial was exited.
<026.654555> call: create RC: 9600 <-> 8000...
<026.654562> slamr0: modem_start..
<026.654567> slamr0: modem set state: 1 --> 2...
<026.654572> slamr0: new state: DP_ESTAB
<026.654577> main: modemap_ioctl: cmd 8, arg 3...
<026.654584> slamr0: modem set hook: 0 --> 1...
<026.654590> main: modemap_ioctl: cmd 2, arg 1...
<026.654597> err: slamr0: modem start = -1: cannot start device.
<026.654603> slamr0: modem_stop..
<026.654608> slamr0: modem set hook: 0 --> 0...
<026.654613> main: modemap_ioctl: cmd 8, arg 0...
<026.654619> call: delete...
<026.654624> Dialer was aborted.
<026.654629> CALLPROG_Delete is entered
<026.654634> cadence_delete with CADENCE_DIAL_OBJ is invoked
<026.654639> cadence_delete with CADENCE_OBJ is invoked
<026.654644> CALLPROG_Delete is exited
<026.654650> slamr0: modem set state: 2 --> 1...
<026.654655> slamr0: new state: MODEM_IDLE
<026.654660> slamr0: modem report result: 3 (NO CARRIER)
<026.654670> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<026.958258> slamr0: run cmd: ATDT7072000
<026.958266> slamr0: modem dial: T7072000...
<026.958272> slamr0: modem_dial_start...
<026.958277> call: create...
<026.958283> CallProgFP_Create >>
<026.958288> APPLY_FILTER = 0
<026.958293> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.958299> ============> 6
<026.958304> Cadence: Busy Tone loose detection is 0

<026.958310> TYPE BUSY
<026.958315> Filter index 6
<026.958320> Filter SubIndex 0
<026.958330> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<026.958336> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<026.958341> OFF_TIME_THAT_RESETS_CYCLE 90
<026.958346> BUFFER LENGTH 160 samples.
<026.958351> INTEGRATION_LENGTH 0[ms]
<026.958356> LEVEL 96
<026.958362> INTEGRATION_TIME = 0 Buffers.
<026.958368> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<026.958374> TYPE DIAL
<026.958379> Filter index 5
<026.958384> Filter SubIndex 0
<026.958388> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<026.958394> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<026.958399> OFF_TIME_THAT_RESETS_CYCLE 0
<026.958404> BUFFER LENGTH 666 samples.
<026.958409> INTEGRATION_LENGTH 2500[ms]
<026.958414> LEVEL 96
<026.958420> INTEGRATION_TIME = 28 Buffers.
<026.958426> CALLPROG Create <<
<026.958431> CALLPROG Dialing T7072000
<026.958436> Configuration->tone_DigitLength 100
<026.958442> Configuration->pulse_OffHookTime 36
<026.958447> Configuration->pulse_OnHookTime 64
<026.958452> Configuration->dialPauseTime 2
<026.958457> Configuration->flashTime 50
<026.958462> Configuration->toneOrPulseFlag 0
<026.958467> Configuration->dialModifierValidationFlag 0
<026.958472> Configuration->ABCD_PermittedFlag 0
<026.958477> Configuration->pulseAndToneInSameStringPermittedFlag 0
<026.958483> Configuration->callingToneFlag 0
<026.958488> Configuration->commaPauseDurLimit 255
<026.958493> Configuration->digitPattern 1
<026.958498> Configuration->tone_BetweenDigitsInterval 100
<026.958503> Configuration->pulse_BetweenDigitsInterval 800
<026.958508> DTMF_Gain1 = 13014
<026.958513> DTMF_Gain2 = 16384
<026.958519> AnalyzeDialString: Updated 17 May 1999 00:50
<026.958524> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<026.958529> Dial String Syntax is VALID
<026.958534> GetNoAnswerTimeOut. 60
<026.958539> WAIT DIAL TIMEOUT = 5
<026.958544> CALLPROG_Dial was exited.
<026.958549> call: create RC: 9600 <-> 8000...
<026.958555> slamr0: modem_start..
<026.958560> slamr0: modem set state: 1 --> 2...
<026.958566> slamr0: new state: DP_ESTAB
<026.958571> main: modemap_ioctl: cmd 8, arg 3...
<026.958578> slamr0: modem set hook: 0 --> 1...
<026.958583> main: modemap_ioctl: cmd 2, arg 1...
<026.958590> err: slamr0: modem start = -1: cannot start device.
<026.958596> slamr0: modem_stop..
<026.958601> slamr0: modem set hook: 0 --> 0...
<026.958607> main: modemap_ioctl: cmd 8, arg 0...
<026.958613> call: delete...
<026.958618> Dialer was aborted.
<026.958622> CALLPROG_Delete is entered
<026.958627> cadence_delete with CADENCE_DIAL_OBJ is invoked
<026.958633> cadence_delete with CADENCE_OBJ is invoked
<026.958638> CALLPROG_Delete is exited
<026.958643> slamr0: modem set state: 2 --> 1...
<026.958649> slamr0: new state: MODEM_IDLE
<026.958654> slamr0: modem report result: 3 (NO CARRIER)
<026.958664> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<027.262257> slamr0: run cmd: ATDT7072000
<027.262267> slamr0: modem dial: T7072000...
<027.262272> slamr0: modem_dial_start...
<027.262278> call: create...
<027.262284> CallProgFP_Create >>
<027.262289> APPLY_FILTER = 0
<027.262294> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.262300> ============> 6
<027.262305> Cadence: Busy Tone loose detection is 0

<027.262312> TYPE BUSY
<027.262317> Filter index 6
<027.262326> Filter SubIndex 0
<027.262332> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<027.262337> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<027.262343> OFF_TIME_THAT_RESETS_CYCLE 90
<027.262348> BUFFER LENGTH 160 samples.
<027.262353> INTEGRATION_LENGTH 0[ms]
<027.262358> LEVEL 96
<027.262364> INTEGRATION_TIME = 0 Buffers.
<027.262370> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.262377> TYPE DIAL
<027.262381> Filter index 5
<027.262386> Filter SubIndex 0
<027.262391> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<027.262396> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<027.262402> OFF_TIME_THAT_RESETS_CYCLE 0
<027.262407> BUFFER LENGTH 666 samples.
<027.262412> INTEGRATION_LENGTH 2500[ms]
<027.262417> LEVEL 96
<027.262422> INTEGRATION_TIME = 28 Buffers.
<027.262429> CALLPROG Create <<
<027.262434> CALLPROG Dialing T7072000
<027.262439> Configuration->tone_DigitLength 100
<027.262445> Configuration->pulse_OffHookTime 36
<027.262450> Configuration->pulse_OnHookTime 64
<027.262455> Configuration->dialPauseTime 2
<027.262460> Configuration->flashTime 50
<027.262465> Configuration->toneOrPulseFlag 0
<027.262470> Configuration->dialModifierValidationFlag 0
<027.262476> Configuration->ABCD_PermittedFlag 0
<027.262481> Configuration->pulseAndToneInSameStringPermittedFlag 0
<027.262486> Configuration->callingToneFlag 0
<027.262491> Configuration->commaPauseDurLimit 255
<027.262496> Configuration->digitPattern 1
<027.262501> Configuration->tone_BetweenDigitsInterval 100
<027.262507> Configuration->pulse_BetweenDigitsInterval 800
<027.262512> DTMF_Gain1 = 13014
<027.262517> DTMF_Gain2 = 16384
<027.262522> AnalyzeDialString: Updated 17 May 1999 00:50
<027.262527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<027.262533> Dial String Syntax is VALID
<027.262538> GetNoAnswerTimeOut. 60
<027.262543> WAIT DIAL TIMEOUT = 5
<027.262548> CALLPROG_Dial was exited.
<027.262553> call: create RC: 9600 <-> 8000...
<027.262559> slamr0: modem_start..
<027.262565> slamr0: modem set state: 1 --> 2...
<027.262570> slamr0: new state: DP_ESTAB
<027.262575> main: modemap_ioctl: cmd 8, arg 3...
<027.262582> slamr0: modem set hook: 0 --> 1...
<027.262588> main: modemap_ioctl: cmd 2, arg 1...
<027.262595> err: slamr0: modem start = -1: cannot start device.
<027.262601> slamr0: modem_stop..
<027.262606> slamr0: modem set hook: 0 --> 0...
<027.262611> main: modemap_ioctl: cmd 8, arg 0...
<027.262618> call: delete...
<027.262622> Dialer was aborted.
<027.262627> CALLPROG_Delete is entered
<027.262632> cadence_delete with CADENCE_DIAL_OBJ is invoked
<027.262638> cadence_delete with CADENCE_OBJ is invoked
<027.262643> CALLPROG_Delete is exited
<027.262649> slamr0: modem set state: 2 --> 1...
<027.262654> slamr0: new state: MODEM_IDLE
<027.262659> slamr0: modem report result: 3 (NO CARRIER)
<027.262669> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<027.566257> slamr0: run cmd: ATDT7072000
<027.566266> slamr0: modem dial: T7072000...
<027.566272> slamr0: modem_dial_start...
<027.566277> call: create...
<027.566283> CallProgFP_Create >>
<027.566287> APPLY_FILTER = 0
<027.566293> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.566299> ============> 6
<027.566304> Cadence: Busy Tone loose detection is 0

<027.566310> TYPE BUSY
<027.566315> Filter index 6
<027.566319> Filter SubIndex 0
<027.566329> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<027.566335> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<027.566340> OFF_TIME_THAT_RESETS_CYCLE 90
<027.566346> BUFFER LENGTH 160 samples.
<027.566351> INTEGRATION_LENGTH 0[ms]
<027.566356> LEVEL 96
<027.566362> INTEGRATION_TIME = 0 Buffers.
<027.566368> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.566374> TYPE DIAL
<027.566379> Filter index 5
<027.566384> Filter SubIndex 0
<027.566388> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<027.566394> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<027.566399> OFF_TIME_THAT_RESETS_CYCLE 0
<027.566404> BUFFER LENGTH 666 samples.
<027.566409> INTEGRATION_LENGTH 2500[ms]
<027.566414> LEVEL 96
<027.566420> INTEGRATION_TIME = 28 Buffers.
<027.566426> CALLPROG Create <<
<027.566431> CALLPROG Dialing T7072000
<027.566437> Configuration->tone_DigitLength 100
<027.566442> Configuration->pulse_OffHookTime 36
<027.566447> Configuration->pulse_OnHookTime 64
<027.566452> Configuration->dialPauseTime 2
<027.566457> Configuration->flashTime 50
<027.566462> Configuration->toneOrPulseFlag 0
<027.566467> Configuration->dialModifierValidationFlag 0
<027.566473> Configuration->ABCD_PermittedFlag 0
<027.566478> Configuration->pulseAndToneInSameStringPermittedFlag 0
<027.566483> Configuration->callingToneFlag 0
<027.566488> Configuration->commaPauseDurLimit 255
<027.566493> Configuration->digitPattern 1
<027.566498> Configuration->tone_BetweenDigitsInterval 100
<027.566504> Configuration->pulse_BetweenDigitsInterval 800
<027.566509> DTMF_Gain1 = 13014
<027.566514> DTMF_Gain2 = 16384
<027.566519> AnalyzeDialString: Updated 17 May 1999 00:50
<027.566524> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<027.566529> Dial String Syntax is VALID
<027.566535> GetNoAnswerTimeOut. 60
<027.566540> WAIT DIAL TIMEOUT = 5
<027.566545> CALLPROG_Dial was exited.
<027.566550> call: create RC: 9600 <-> 8000...
<027.566556> slamr0: modem_start..
<027.566561> slamr0: modem set state: 1 --> 2...
<027.566567> slamr0: new state: DP_ESTAB
<027.566572> main: modemap_ioctl: cmd 8, arg 3...
<027.566579> slamr0: modem set hook: 0 --> 1...
<027.566585> main: modemap_ioctl: cmd 2, arg 1...
<027.566592> err: slamr0: modem start = -1: cannot start device.
<027.566598> slamr0: modem_stop..
<027.566603> slamr0: modem set hook: 0 --> 0...
<027.566609> main: modemap_ioctl: cmd 8, arg 0...
<027.566615> call: delete...
<027.566620> Dialer was aborted.
<027.566624> CALLPROG_Delete is entered
<027.566629> cadence_delete with CADENCE_DIAL_OBJ is invoked
<027.566635> cadence_delete with CADENCE_OBJ is invoked
<027.566640> CALLPROG_Delete is exited
<027.566646> slamr0: modem set state: 2 --> 1...
<027.566651> slamr0: new state: MODEM_IDLE
<027.566656> slamr0: modem report result: 3 (NO CARRIER)
<027.566666> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<027.870258> slamr0: run cmd: ATDT7072000
<027.870268> slamr0: modem dial: T7072000...
<027.870273> slamr0: modem_dial_start...
<027.870278> call: create...
<027.870285> CallProgFP_Create >>
<027.870290> APPLY_FILTER = 0
<027.870296> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.870302> ============> 6
<027.870307> Cadence: Busy Tone loose detection is 0

<027.870313> TYPE BUSY
<027.870318> Filter index 6
<027.870328> Filter SubIndex 0
<027.870333> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<027.870339> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<027.870344> OFF_TIME_THAT_RESETS_CYCLE 90
<027.870349> BUFFER LENGTH 160 samples.
<027.870355> INTEGRATION_LENGTH 0[ms]
<027.870360> LEVEL 96
<027.870366> INTEGRATION_TIME = 0 Buffers.
<027.870372> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<027.870378> TYPE DIAL
<027.870383> Filter index 5
<027.870388> Filter SubIndex 0
<027.870393> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<027.870398> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<027.870403> OFF_TIME_THAT_RESETS_CYCLE 0
<027.870408> BUFFER LENGTH 666 samples.
<027.870413> INTEGRATION_LENGTH 2500[ms]
<027.870418> LEVEL 96
<027.870424> INTEGRATION_TIME = 28 Buffers.
<027.870430> CALLPROG Create <<
<027.870435> CALLPROG Dialing T7072000
<027.870441> Configuration->tone_DigitLength 100
<027.870446> Configuration->pulse_OffHookTime 36
<027.870451> Configuration->pulse_OnHookTime 64
<027.870456> Configuration->dialPauseTime 2
<027.870461> Configuration->flashTime 50
<027.870467> Configuration->toneOrPulseFlag 0
<027.870472> Configuration->dialModifierValidationFlag 0
<027.870477> Configuration->ABCD_PermittedFlag 0
<027.870482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<027.870487> Configuration->callingToneFlag 0
<027.870493> Configuration->commaPauseDurLimit 255
<027.870498> Configuration->digitPattern 1
<027.870503> Configuration->tone_BetweenDigitsInterval 100
<027.870508> Configuration->pulse_BetweenDigitsInterval 800
<027.870513> DTMF_Gain1 = 13014
<027.870518> DTMF_Gain2 = 16384
<027.870524> AnalyzeDialString: Updated 17 May 1999 00:50
<027.870529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<027.870534> Dial String Syntax is VALID
<027.870539> GetNoAnswerTimeOut. 60
<027.870544> WAIT DIAL TIMEOUT = 5
<027.870549> CALLPROG_Dial was exited.
<027.870554> call: create RC: 9600 <-> 8000...
<027.870561> slamr0: modem_start..
<027.870566> slamr0: modem set state: 1 --> 2...
<027.870572> slamr0: new state: DP_ESTAB
<027.870577> main: modemap_ioctl: cmd 8, arg 3...
<027.870584> slamr0: modem set hook: 0 --> 1...
<027.870590> main: modemap_ioctl: cmd 2, arg 1...
<027.870598> err: slamr0: modem start = -1: cannot start device.
<027.870604> slamr0: modem_stop..
<027.870609> slamr0: modem set hook: 0 --> 0...
<027.870615> main: modemap_ioctl: cmd 8, arg 0...
<027.870621> call: delete...
<027.870626> Dialer was aborted.
<027.870631> CALLPROG_Delete is entered
<027.870636> cadence_delete with CADENCE_DIAL_OBJ is invoked
<027.870641> cadence_delete with CADENCE_OBJ is invoked
<027.870647> CALLPROG_Delete is exited
<027.870652> slamr0: modem set state: 2 --> 1...
<027.870658> slamr0: new state: MODEM_IDLE
<027.870663> slamr0: modem report result: 3 (NO CARRIER)
<027.870673> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<028.174262> slamr0: run cmd: ATDT7072000
<028.174273> slamr0: modem dial: T7072000...
<028.174278> slamr0: modem_dial_start...
<028.174283> call: create...
<028.174289> CallProgFP_Create >>
<028.174294> APPLY_FILTER = 0
<028.174300> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.174306> ============> 6
<028.174311> Cadence: Busy Tone loose detection is 0

<028.174317> TYPE BUSY
<028.174328> Filter index 6
<028.174334> Filter SubIndex 0
<028.174339> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<028.174345> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<028.174350> OFF_TIME_THAT_RESETS_CYCLE 90
<028.174355> BUFFER LENGTH 160 samples.
<028.174360> INTEGRATION_LENGTH 0[ms]
<028.174365> LEVEL 96
<028.174372> INTEGRATION_TIME = 0 Buffers.
<028.174378> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.174384> TYPE DIAL
<028.174388> Filter index 5
<028.174393> Filter SubIndex 0
<028.174398> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<028.174403> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<028.174409> OFF_TIME_THAT_RESETS_CYCLE 0
<028.174414> BUFFER LENGTH 666 samples.
<028.174419> INTEGRATION_LENGTH 2500[ms]
<028.174424> LEVEL 96
<028.174430> INTEGRATION_TIME = 28 Buffers.
<028.174436> CALLPROG Create <<
<028.174441> CALLPROG Dialing T7072000
<028.174447> Configuration->tone_DigitLength 100
<028.174452> Configuration->pulse_OffHookTime 36
<028.174457> Configuration->pulse_OnHookTime 64
<028.174462> Configuration->dialPauseTime 2
<028.174468> Configuration->flashTime 50
<028.174473> Configuration->toneOrPulseFlag 0
<028.174478> Configuration->dialModifierValidationFlag 0
<028.174483> Configuration->ABCD_PermittedFlag 0
<028.174488> Configuration->pulseAndToneInSameStringPermittedFlag 0
<028.174494> Configuration->callingToneFlag 0
<028.174499> Configuration->commaPauseDurLimit 255
<028.174504> Configuration->digitPattern 1
<028.174509> Configuration->tone_BetweenDigitsInterval 100
<028.174514> Configuration->pulse_BetweenDigitsInterval 800
<028.174519> DTMF_Gain1 = 13014
<028.174524> DTMF_Gain2 = 16384
<028.174530> AnalyzeDialString: Updated 17 May 1999 00:50
<028.174535> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<028.174540> Dial String Syntax is VALID
<028.174545> GetNoAnswerTimeOut. 60
<028.174551> WAIT DIAL TIMEOUT = 5
<028.174556> CALLPROG_Dial was exited.
<028.174561> call: create RC: 9600 <-> 8000...
<028.174567> slamr0: modem_start..
<028.174572> slamr0: modem set state: 1 --> 2...
<028.174578> slamr0: new state: DP_ESTAB
<028.174584> main: modemap_ioctl: cmd 8, arg 3...
<028.174591> slamr0: modem set hook: 0 --> 1...
<028.174597> main: modemap_ioctl: cmd 2, arg 1...
<028.174604> err: slamr0: modem start = -1: cannot start device.
<028.174610> slamr0: modem_stop..
<028.174616> slamr0: modem set hook: 0 --> 0...
<028.174621> main: modemap_ioctl: cmd 8, arg 0...
<028.174627> call: delete...
<028.174632> Dialer was aborted.
<028.174637> CALLPROG_Delete is entered
<028.174642> cadence_delete with CADENCE_DIAL_OBJ is invoked
<028.174647> cadence_delete with CADENCE_OBJ is invoked
<028.174653> CALLPROG_Delete is exited
<028.174658> slamr0: modem set state: 2 --> 1...
<028.174664> slamr0: new state: MODEM_IDLE
<028.174669> slamr0: modem report result: 3 (NO CARRIER)
<028.174679> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<028.478258> slamr0: run cmd: ATDT7072000
<028.478267> slamr0: modem dial: T7072000...
<028.478273> slamr0: modem_dial_start...
<028.478278> call: create...
<028.478284> CallProgFP_Create >>
<028.478289> APPLY_FILTER = 0
<028.478294> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.478300> ============> 6
<028.478305> Cadence: Busy Tone loose detection is 0

<028.478311> TYPE BUSY
<028.478316> Filter index 6
<028.478321> Filter SubIndex 0
<028.478331> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<028.478336> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<028.478342> OFF_TIME_THAT_RESETS_CYCLE 90
<028.478347> BUFFER LENGTH 160 samples.
<028.478352> INTEGRATION_LENGTH 0[ms]
<028.478357> LEVEL 96
<028.478364> INTEGRATION_TIME = 0 Buffers.
<028.478370> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.478376> TYPE DIAL
<028.478380> Filter index 5
<028.478385> Filter SubIndex 0
<028.478390> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<028.478395> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<028.478401> OFF_TIME_THAT_RESETS_CYCLE 0
<028.478406> BUFFER LENGTH 666 samples.
<028.478411> INTEGRATION_LENGTH 2500[ms]
<028.478416> LEVEL 96
<028.478421> INTEGRATION_TIME = 28 Buffers.
<028.478427> CALLPROG Create <<
<028.478433> CALLPROG Dialing T7072000
<028.478438> Configuration->tone_DigitLength 100
<028.478444> Configuration->pulse_OffHookTime 36
<028.478449> Configuration->pulse_OnHookTime 64
<028.478454> Configuration->dialPauseTime 2
<028.478459> Configuration->flashTime 50
<028.478464> Configuration->toneOrPulseFlag 0
<028.478469> Configuration->dialModifierValidationFlag 0
<028.478474> Configuration->ABCD_PermittedFlag 0
<028.478479> Configuration->pulseAndToneInSameStringPermittedFlag 0
<028.478485> Configuration->callingToneFlag 0
<028.478490> Configuration->commaPauseDurLimit 255
<028.478495> Configuration->digitPattern 1
<028.478500> Configuration->tone_BetweenDigitsInterval 100
<028.478505> Configuration->pulse_BetweenDigitsInterval 800
<028.478511> DTMF_Gain1 = 13014
<028.478516> DTMF_Gain2 = 16384
<028.478521> AnalyzeDialString: Updated 17 May 1999 00:50
<028.478526> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<028.478531> Dial String Syntax is VALID
<028.478537> GetNoAnswerTimeOut. 60
<028.478542> WAIT DIAL TIMEOUT = 5
<028.478547> CALLPROG_Dial was exited.
<028.478552> call: create RC: 9600 <-> 8000...
<028.478558> slamr0: modem_start..
<028.478564> slamr0: modem set state: 1 --> 2...
<028.478569> slamr0: new state: DP_ESTAB
<028.478575> main: modemap_ioctl: cmd 8, arg 3...
<028.478581> slamr0: modem set hook: 0 --> 1...
<028.478587> main: modemap_ioctl: cmd 2, arg 1...
<028.478594> err: slamr0: modem start = -1: cannot start device.
<028.478601> slamr0: modem_stop..
<028.478606> slamr0: modem set hook: 0 --> 0...
<028.478611> main: modemap_ioctl: cmd 8, arg 0...
<028.478617> call: delete...
<028.478622> Dialer was aborted.
<028.478627> CALLPROG_Delete is entered
<028.478631> cadence_delete with CADENCE_DIAL_OBJ is invoked
<028.478637> cadence_delete with CADENCE_OBJ is invoked
<028.478642> CALLPROG_Delete is exited
<028.478648> slamr0: modem set state: 2 --> 1...
<028.478653> slamr0: new state: MODEM_IDLE
<028.478659> slamr0: modem report result: 3 (NO CARRIER)
<028.478668> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<028.782258> slamr0: run cmd: ATDT7072000
<028.782267> slamr0: modem dial: T7072000...
<028.782273> slamr0: modem_dial_start...
<028.782278> call: create...
<028.782284> CallProgFP_Create >>
<028.782289> APPLY_FILTER = 0
<028.782294> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.782300> ============> 6
<028.782305> Cadence: Busy Tone loose detection is 0

<028.782312> TYPE BUSY
<028.782316> Filter index 6
<028.782326> Filter SubIndex 0
<028.782332> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<028.782337> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<028.782343> OFF_TIME_THAT_RESETS_CYCLE 90
<028.782348> BUFFER LENGTH 160 samples.
<028.782353> INTEGRATION_LENGTH 0[ms]
<028.782358> LEVEL 96
<028.782364> INTEGRATION_TIME = 0 Buffers.
<028.782370> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<028.782376> TYPE DIAL
<028.782381> Filter index 5
<028.782386> Filter SubIndex 0
<028.782391> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<028.782396> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<028.782401> OFF_TIME_THAT_RESETS_CYCLE 0
<028.782406> BUFFER LENGTH 666 samples.
<028.782411> INTEGRATION_LENGTH 2500[ms]
<028.782417> LEVEL 96
<028.782422> INTEGRATION_TIME = 28 Buffers.
<028.782428> CALLPROG Create <<
<028.782433> CALLPROG Dialing T7072000
<028.782439> Configuration->tone_DigitLength 100
<028.782444> Configuration->pulse_OffHookTime 36
<028.782449> Configuration->pulse_OnHookTime 64
<028.782454> Configuration->dialPauseTime 2
<028.782460> Configuration->flashTime 50
<028.782465> Configuration->toneOrPulseFlag 0
<028.782470> Configuration->dialModifierValidationFlag 0
<028.782475> Configuration->ABCD_PermittedFlag 0
<028.782480> Configuration->pulseAndToneInSameStringPermittedFlag 0
<028.782486> Configuration->callingToneFlag 0
<028.782491> Configuration->commaPauseDurLimit 255
<028.782496> Configuration->digitPattern 1
<028.782501> Configuration->tone_BetweenDigitsInterval 100
<028.782506> Configuration->pulse_BetweenDigitsInterval 800
<028.782512> DTMF_Gain1 = 13014
<028.782516> DTMF_Gain2 = 16384
<028.782522> AnalyzeDialString: Updated 17 May 1999 00:50
<028.782527> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<028.782532> Dial String Syntax is VALID
<028.782537> GetNoAnswerTimeOut. 60
<028.782542> WAIT DIAL TIMEOUT = 5
<028.782547> CALLPROG_Dial was exited.
<028.782552> call: create RC: 9600 <-> 8000...
<028.782559> slamr0: modem_start..
<028.782564> slamr0: modem set state: 1 --> 2...
<028.782570> slamr0: new state: DP_ESTAB
<028.782575> main: modemap_ioctl: cmd 8, arg 3...
<028.782582> slamr0: modem set hook: 0 --> 1...
<028.782588> main: modemap_ioctl: cmd 2, arg 1...
<028.782595> err: slamr0: modem start = -1: cannot start device.
<028.782601> slamr0: modem_stop..
<028.782606> slamr0: modem set hook: 0 --> 0...
<028.782611> main: modemap_ioctl: cmd 8, arg 0...
<028.782617> call: delete...
<028.782622> Dialer was aborted.
<028.782627> CALLPROG_Delete is entered
<028.782632> cadence_delete with CADENCE_DIAL_OBJ is invoked
<028.782637> cadence_delete with CADENCE_OBJ is invoked
<028.782642> CALLPROG_Delete is exited
<028.782648> slamr0: modem set state: 2 --> 1...
<028.782654> slamr0: new state: MODEM_IDLE
<028.782659> slamr0: modem report result: 3 (NO CARRIER)
<028.782669> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<029.086258> slamr0: run cmd: ATDT7072000
<029.086267> slamr0: modem dial: T7072000...
<029.086273> slamr0: modem_dial_start...
<029.086278> call: create...
<029.086284> CallProgFP_Create >>
<029.086290> APPLY_FILTER = 0
<029.086295> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<029.086301> ============> 6
<029.086306> Cadence: Busy Tone loose detection is 0

<029.086312> TYPE BUSY
<029.086317> Filter index 6
<029.086327> Filter SubIndex 0
<029.086332> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<029.086338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<029.086343> OFF_TIME_THAT_RESETS_CYCLE 90
<029.086349> BUFFER LENGTH 160 samples.
<029.086354> INTEGRATION_LENGTH 0[ms]
<029.086359> LEVEL 96
<029.086365> INTEGRATION_TIME = 0 Buffers.
<029.086371> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<029.086377> TYPE DIAL
<029.086382> Filter index 5
<029.086387> Filter SubIndex 0
<029.086392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<029.086397> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<029.086403> OFF_TIME_THAT_RESETS_CYCLE 0
<029.086408> BUFFER LENGTH 666 samples.
<029.086413> INTEGRATION_LENGTH 2500[ms]
<029.086418> LEVEL 96
<029.086424> INTEGRATION_TIME = 28 Buffers.
<029.086430> CALLPROG Create <<
<029.086435> CALLPROG Dialing T7072000
<029.086440> Configuration->tone_DigitLength 100
<029.086446> Configuration->pulse_OffHookTime 36
<029.086451> Configuration->pulse_OnHookTime 64
<029.086456> Configuration->dialPauseTime 2
<029.086461> Configuration->flashTime 50
<029.086466> Configuration->toneOrPulseFlag 0
<029.086472> Configuration->dialModifierValidationFlag 0
<029.086477> Configuration->ABCD_PermittedFlag 0
<029.086482> Configuration->pulseAndToneInSameStringPermittedFlag 0
<029.086488> Configuration->callingToneFlag 0
<029.086493> Configuration->commaPauseDurLimit 255
<029.086498> Configuration->digitPattern 1
<029.086503> Configuration->tone_BetweenDigitsInterval 100
<029.086508> Configuration->pulse_BetweenDigitsInterval 800
<029.086513> DTMF_Gain1 = 13014
<029.086518> DTMF_Gain2 = 16384
<029.086524> AnalyzeDialString: Updated 17 May 1999 00:50
<029.086529> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<029.086534> Dial String Syntax is VALID
<029.086539> GetNoAnswerTimeOut. 60
<029.086544> WAIT DIAL TIMEOUT = 5
<029.086550> CALLPROG_Dial was exited.
<029.086554> call: create RC: 9600 <-> 8000...
<029.086561> slamr0: modem_start..
<029.086566> slamr0: modem set state: 1 --> 2...
<029.086572> slamr0: new state: DP_ESTAB
<029.086577> main: modemap_ioctl: cmd 8, arg 3...
<029.086584> slamr0: modem set hook: 0 --> 1...
<029.086590> main: modemap_ioctl: cmd 2, arg 1...
<029.086597> err: slamr0: modem start = -1: cannot start device.
<029.086603> slamr0: modem_stop..
<029.086608> slamr0: modem set hook: 0 --> 0...
<029.086614> main: modemap_ioctl: cmd 8, arg 0...
<029.086620> call: delete...
<029.086625> Dialer was aborted.
<029.086630> CALLPROG_Delete is entered
<029.086635> cadence_delete with CADENCE_DIAL_OBJ is invoked
<029.086640> cadence_delete with CADENCE_OBJ is invoked
<029.086645> CALLPROG_Delete is exited
<029.086651> slamr0: modem set state: 2 --> 1...
<029.086657> slamr0: new state: MODEM_IDLE
<029.086662> slamr0: modem report result: 3 (NO CARRIER)
<029.086672> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<029.390258> slamr0: run cmd: ATDT7072000
<029.390268> slamr0: modem dial: T7072000...
<029.390273> slamr0: modem_dial_start...
<029.390278> call: create...
<029.390284> CallProgFP_Create >>
<029.390290> APPLY_FILTER = 0
<029.390295> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<029.390301> ============> 6
<029.390306> Cadence: Busy Tone loose detection is 0

<029.390312> TYPE BUSY
<029.390317> Filter index 6
<029.390327> Filter SubIndex 0
<029.390332> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<029.390338> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<029.390343> OFF_TIME_THAT_RESETS_CYCLE 90
<029.390349> BUFFER LENGTH 160 samples.
<029.390354> INTEGRATION_LENGTH 0[ms]
<029.390359> LEVEL 96
<029.390365> INTEGRATION_TIME = 0 Buffers.
<029.390371> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<029.390377> TYPE DIAL
<029.390382> Filter index 5
<029.390387> Filter SubIndex 0
<029.390392> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<029.390397> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<029.390403> OFF_TIME_THAT_RESETS_CYCLE 0
<029.390408> BUFFER LENGTH 666 samples.
<029.390413> INTEGRATION_LENGTH 2500[ms]
<029.390418> LEVEL 96
<029.390423> INTEGRATION_TIME = 28 Buffers.
<029.390430> CALLPROG Create <<
<029.390435> CALLPROG Dialing T7072000
<029.390440> Configuration->tone_DigitLength 100
<029.390446> Configuration->pulse_OffHookTime 36
<029.390451> Configuration->pulse_OnHookTime 64
<029.390456> Configuration->dialPauseTime 2
<029.390461> Configuration->flashTime 50
<029.390466> Configuration->toneOrPulseFlag 0
<029.390471> Configuration->dialModifierValidationFlag 0
<029.390476> Configuration->ABCD_PermittedFlag 0
<029.390481> Configuration->pulseAndToneInSameStringPermittedFlag 0
<029.390487> Configuration->callingToneFlag 0
<029.390492> Configuration->commaPauseDurLimit 255
<029.390497> Configuration->digitPattern 1
<029.390502> Configuration->tone_BetweenDigitsInterval 100
<029.390508> Configuration->pulse_BetweenDigitsInterval 800
<029.390513> DTMF_Gain1 = 13014
<029.390518> DTMF_Gain2 = 16384
<029.390523> AnalyzeDialString: Updated 17 May 1999 00:50
<029.390528> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<029.390534> Dial String Syntax is VALID
<029.390539> GetNoAnswerTimeOut. 60
<029.390544> WAIT DIAL TIMEOUT = 5
<029.390549> CALLPROG_Dial was exited.
<029.390554> call: create RC: 9600 <-> 8000...
<029.390561> slamr0: modem_start..
<029.390566> slamr0: modem set state: 1 --> 2...
<029.390572> slamr0: new state: DP_ESTAB
<029.390577> main: modemap_ioctl: cmd 8, arg 3...
<029.390584> slamr0: modem set hook: 0 --> 1...
<029.390590> main: modemap_ioctl: cmd 2, arg 1...
<029.390597> err: slamr0: modem start = -1: cannot start device.
<029.390604> slamr0: modem_stop..
<029.390609> slamr0: modem set hook: 0 --> 0...
<029.390614> main: modemap_ioctl: cmd 8, arg 0...
<029.390620> call: delete...
<029.390625> Dialer was aborted.
<029.390630> CALLPROG_Delete is entered
<029.390635> cadence_delete with CADENCE_DIAL_OBJ is invoked
<029.390640> cadence_delete with CADENCE_OBJ is invoked
<029.390645> CALLPROG_Delete is exited
<029.390651> slamr0: modem set state: 2 --> 1...
<029.390657> slamr0: new state: MODEM_IDLE
<029.390662> slamr0: modem report result: 3 (NO CARRIER)
<029.390672> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Fri Nov 20 22:50:29 2009
<029.664615> main: termios changed.
<029.664624> slamr0: update termios...
<029.664664> main: pty closed.
]0;root@localhost:~ [root@localhost ~]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
<042.666399> main: termios changed.
<042.666415> slamr0: update termios...
<042.666505> slamr0: run cmd: ATZ
<042.666511> slamr0: modem reset...
<042.666517> slamr0: modem set state: 1 --> 1...
<042.666523> slamr0: modem set mode: -> 0...
<042.666529> slamr0: modem report result: 0 (OK)
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
<042.768427> slamr0: run cmd: ATQ0V1E1S0=0X3&C1&D2+MS=90
<042.768442> slamr0: modem report result: 0 (OK)
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
OK
--> Modem initialized.
--> Sending: ATDT7072000
--> Waiting for carrier.
<042.870384> slamr0: run cmd: ATDT7072000
<042.870394> slamr0: modem dial: T7072000...
<042.870400> slamr0: modem_dial_start...
<042.870406> call: create...
<042.870414> CallProgFP_Create >>
<042.870419> APPLY_FILTER = 0
<042.870426> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<042.870432> ============> 6
<042.870437> Cadence: Busy Tone loose detection is 0

<042.870444> TYPE BUSY
<042.870449> Filter index 6
<042.870453> Filter SubIndex 0
<042.870458> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<042.870464> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<042.870470> OFF_TIME_THAT_RESETS_CYCLE 90
<042.870475> BUFFER LENGTH 160 samples.
<042.870480> INTEGRATION_LENGTH 0[ms]
<042.870485> LEVEL 96
<042.870492> INTEGRATION_TIME = 0 Buffers.
<042.870498> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<042.870504> TYPE DIAL
<042.870509> Filter index 5
<042.870514> Filter SubIndex 0
<042.870518> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<042.870524> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<042.870529> OFF_TIME_THAT_RESETS_CYCLE 0
<042.870535> BUFFER LENGTH 666 samples.
<042.870540> INTEGRATION_LENGTH 2500[ms]
<042.870545> LEVEL 96
<042.870550> INTEGRATION_TIME = 28 Buffers.
<042.870557> CALLPROG Create <<
<042.870562> CALLPROG Dialing T7072000
<042.870568> Configuration->tone_DigitLength 100
<042.870574> Configuration->pulse_OffHookTime 36
<042.870579> Configuration->pulse_OnHookTime 64
<042.870584> Configuration->dialPauseTime 2
<042.870589> Configuration->flashTime 50
<042.870594> Configuration->toneOrPulseFlag 0
<042.870599> Configuration->dialModifierValidationFlag 0
<042.870605> Configuration->ABCD_PermittedFlag 0
<042.870610> Configuration->pulseAndToneInSameStringPermittedFlag 0
<042.870616> Configuration->callingToneFlag 0
<042.870621> Configuration->commaPauseDurLimit 255
<042.870626> Configuration->digitPattern 1
<042.870631> Configuration->tone_BetweenDigitsInterval 100
<042.870636> Configuration->pulse_BetweenDigitsInterval 800
<042.870642> DTMF_Gain1 = 13014
<042.870647> DTMF_Gain2 = 16384
<042.870652> AnalyzeDialString: Updated 17 May 1999 00:50
<042.870658> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<042.870664> Dial String Syntax is VALID
<042.870669> GetNoAnswerTimeOut. 60
<042.870674> WAIT DIAL TIMEOUT = 5
<042.870679> CALLPROG_Dial was exited.
<042.870684> call: create RC: 9600 <-> 8000...
<042.870692> slamr0: modem_start..
<042.870697> slamr0: modem set state: 1 --> 2...
<042.870703> slamr0: new state: DP_ESTAB
<042.870708> main: modemap_ioctl: cmd 8, arg 3...
<042.870718> slamr0: modem set hook: 0 --> 1...
<042.870724> main: modemap_ioctl: cmd 2, arg 1...
<042.870732> err: slamr0: modem start = -1: cannot start device.
<042.870739> slamr0: modem_stop..
<042.870744> slamr0: modem set hook: 0 --> 0...
<042.870749> main: modemap_ioctl: cmd 8, arg 0...
<042.870756> call: delete...
<042.870761> Dialer was aborted.
<042.870766> CALLPROG_Delete is entered
<042.870771> cadence_delete with CADENCE_DIAL_OBJ is invoked
<042.870777> cadence_delete with CADENCE_OBJ is invoked
<042.870782> CALLPROG_Delete is exited
<042.870788> slamr0: modem set state: 2 --> 1...
<042.870794> slamr0: new state: MODEM_IDLE
<042.870799> slamr0: modem report result: 3 (NO CARRIER)
<042.870809> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<043.175384> slamr0: run cmd: ATDT7072000
<043.175395> slamr0: modem dial: T7072000...
<043.175400> slamr0: modem_dial_start...
<043.175406> call: create...
<043.175413> CallProgFP_Create >>
<043.175418> APPLY_FILTER = 0
<043.175424> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.175430> ============> 6
<043.175436> Cadence: Busy Tone loose detection is 0

<043.175442> TYPE BUSY
<043.175447> Filter index 6
<043.175451> Filter SubIndex 0
<043.175456> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<043.175462> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<043.175468> OFF_TIME_THAT_RESETS_CYCLE 90
<043.175473> BUFFER LENGTH 160 samples.
<043.175478> INTEGRATION_LENGTH 0[ms]
<043.175483> LEVEL 96
<043.175490> INTEGRATION_TIME = 0 Buffers.
<043.175496> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.175502> TYPE DIAL
<043.175507> Filter index 5
<043.175512> Filter SubIndex 0
<043.175517> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<043.175522> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<043.175528> OFF_TIME_THAT_RESETS_CYCLE 0
<043.175533> BUFFER LENGTH 666 samples.
<043.175538> INTEGRATION_LENGTH 2500[ms]
<043.175543> LEVEL 96
<043.175549> INTEGRATION_TIME = 28 Buffers.
<043.175556> CALLPROG Create <<
<043.175561> CALLPROG Dialing T7072000
<043.175566> Configuration->tone_DigitLength 100
<043.175572> Configuration->pulse_OffHookTime 36
<043.175577> Configuration->pulse_OnHookTime 64
<043.175582> Configuration->dialPauseTime 2
<043.175587> Configuration->flashTime 50
<043.175592> Configuration->toneOrPulseFlag 0
<043.175598> Configuration->dialModifierValidationFlag 0
<043.175603> Configuration->ABCD_PermittedFlag 0
<043.175608> Configuration->pulseAndToneInSameStringPermittedFlag 0
<043.175614> Configuration->callingToneFlag 0
<043.175619> Configuration->commaPauseDurLimit 255
<043.175624> Configuration->digitPattern 1
<043.175629> Configuration->tone_BetweenDigitsInterval 100
<043.175635> Configuration->pulse_BetweenDigitsInterval 800
<043.175640> DTMF_Gain1 = 13014
<043.175645> DTMF_Gain2 = 16384
<043.175650> AnalyzeDialString: Updated 17 May 1999 00:50
<043.175656> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<043.175661> Dial String Syntax is VALID
<043.175666> GetNoAnswerTimeOut. 60
<043.175672> WAIT DIAL TIMEOUT = 5
<043.175677> CALLPROG_Dial was exited.
<043.175682> call: create RC: 9600 <-> 8000...
<043.175688> slamr0: modem_start..
<043.175694> slamr0: modem set state: 1 --> 2...
<043.175700> slamr0: new state: DP_ESTAB
<043.175705> main: modemap_ioctl: cmd 8, arg 3...
<043.175712> slamr0: modem set hook: 0 --> 1...
<043.175718> main: modemap_ioctl: cmd 2, arg 1...
<043.175726> err: slamr0: modem start = -1: cannot start device.
<043.175732> slamr0: modem_stop..
<043.175737> slamr0: modem set hook: 0 --> 0...
<043.175742> main: modemap_ioctl: cmd 8, arg 0...
<043.175749> call: delete...
<043.175754> Dialer was aborted.
<043.175758> CALLPROG_Delete is entered
<043.175763> cadence_delete with CADENCE_DIAL_OBJ is invoked
<043.175769> cadence_delete with CADENCE_OBJ is invoked
<043.175774> CALLPROG_Delete is exited
<043.175780> slamr0: modem set state: 2 --> 1...
<043.175786> slamr0: new state: MODEM_IDLE
<043.175791> slamr0: modem report result: 3 (NO CARRIER)
<043.175802> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<043.479385> slamr0: run cmd: ATDT7072000
<043.479395> slamr0: modem dial: T7072000...
<043.479401> slamr0: modem_dial_start...
<043.479406> call: create...
<043.479413> CallProgFP_Create >>
<043.479418> APPLY_FILTER = 0
<043.479424> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.479430> ============> 6
<043.479435> Cadence: Busy Tone loose detection is 0

<043.479441> TYPE BUSY
<043.479446> Filter index 6
<043.479451> Filter SubIndex 0
<043.479456> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<043.479461> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<043.479467> OFF_TIME_THAT_RESETS_CYCLE 90
<043.479472> BUFFER LENGTH 160 samples.
<043.479477> INTEGRATION_LENGTH 0[ms]
<043.479482> LEVEL 96
<043.479489> INTEGRATION_TIME = 0 Buffers.
<043.479495> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.479501> TYPE DIAL
<043.479506> Filter index 5
<043.479511> Filter SubIndex 0
<043.479516> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<043.479521> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<043.479527> OFF_TIME_THAT_RESETS_CYCLE 0
<043.479532> BUFFER LENGTH 666 samples.
<043.479537> INTEGRATION_LENGTH 2500[ms]
<043.479542> LEVEL 96
<043.479547> INTEGRATION_TIME = 28 Buffers.
<043.479554> CALLPROG Create <<
<043.479559> CALLPROG Dialing T7072000
<043.479564> Configuration->tone_DigitLength 100
<043.479570> Configuration->pulse_OffHookTime 36
<043.479575> Configuration->pulse_OnHookTime 64
<043.479580> Configuration->dialPauseTime 2
<043.479586> Configuration->flashTime 50
<043.479591> Configuration->toneOrPulseFlag 0
<043.479596> Configuration->dialModifierValidationFlag 0
<043.479601> Configuration->ABCD_PermittedFlag 0
<043.479606> Configuration->pulseAndToneInSameStringPermittedFlag 0
<043.479612> Configuration->callingToneFlag 0
<043.479617> Configuration->commaPauseDurLimit 255
<043.479622> Configuration->digitPattern 1
<043.479627> Configuration->tone_BetweenDigitsInterval 100
<043.479633> Configuration->pulse_BetweenDigitsInterval 800
<043.479638> DTMF_Gain1 = 13014
<043.479643> DTMF_Gain2 = 16384
<043.479648> AnalyzeDialString: Updated 17 May 1999 00:50
<043.479654> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<043.479659> Dial String Syntax is VALID
<043.479664> GetNoAnswerTimeOut. 60
<043.479670> WAIT DIAL TIMEOUT = 5
<043.479675> CALLPROG_Dial was exited.
<043.479680> call: create RC: 9600 <-> 8000...
<043.479687> slamr0: modem_start..
<043.479692> slamr0: modem set state: 1 --> 2...
<043.479697> slamr0: new state: DP_ESTAB
<043.479703> main: modemap_ioctl: cmd 8, arg 3...
<043.479710> slamr0: modem set hook: 0 --> 1...
<043.479716> main: modemap_ioctl: cmd 2, arg 1...
<043.479723> err: slamr0: modem start = -1: cannot start device.
<043.479729> slamr0: modem_stop..
<043.479734> slamr0: modem set hook: 0 --> 0...
<043.479740> main: modemap_ioctl: cmd 8, arg 0...
<043.479746> call: delete...
<043.479751> Dialer was aborted.
<043.479756> CALLPROG_Delete is entered
<043.479761> cadence_delete with CADENCE_DIAL_OBJ is invoked
<043.479766> cadence_delete with CADENCE_OBJ is invoked
<043.479771> CALLPROG_Delete is exited
<043.479777> slamr0: modem set state: 2 --> 1...
<043.479783> slamr0: new state: MODEM_IDLE
<043.479788> slamr0: modem report result: 3 (NO CARRIER)
<043.479798> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<043.784389> slamr0: run cmd: ATDT7072000
<043.784400> slamr0: modem dial: T7072000...
<043.784406> slamr0: modem_dial_start...
<043.784411> call: create...
<043.784418> CallProgFP_Create >>
<043.784423> APPLY_FILTER = 0
<043.784429> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.784435> ============> 6
<043.784441> Cadence: Busy Tone loose detection is 0

<043.784447> TYPE BUSY
<043.784452> Filter index 6
<043.784457> Filter SubIndex 0
<043.784461> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<043.784467> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<043.784473> OFF_TIME_THAT_RESETS_CYCLE 90
<043.784478> BUFFER LENGTH 160 samples.
<043.784483> INTEGRATION_LENGTH 0[ms]
<043.784488> LEVEL 96
<043.784494> INTEGRATION_TIME = 0 Buffers.
<043.784501> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<043.784507> TYPE DIAL
<043.784512> Filter index 5
<043.784516> Filter SubIndex 0
<043.784521> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<043.784527> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<043.784532> OFF_TIME_THAT_RESETS_CYCLE 0
<043.784537> BUFFER LENGTH 666 samples.
<043.784542> INTEGRATION_LENGTH 2500[ms]
<043.784547> LEVEL 96
<043.784553> INTEGRATION_TIME = 28 Buffers.
<043.784560> CALLPROG Create <<
<043.784565> CALLPROG Dialing T7072000
<043.784570> Configuration->tone_DigitLength 100
<043.784576> Configuration->pulse_OffHookTime 36
<043.784581> Configuration->pulse_OnHookTime 64
<043.784586> Configuration->dialPauseTime 2
<043.784591> Configuration->flashTime 50
<043.784596> Configuration->toneOrPulseFlag 0
<043.784601> Configuration->dialModifierValidationFlag 0
<043.784607> Configuration->ABCD_PermittedFlag 0
<043.784612> Configuration->pulseAndToneInSameStringPermittedFlag 0
<043.784617> Configuration->callingToneFlag 0
<043.784622> Configuration->commaPauseDurLimit 255
<043.784627> Configuration->digitPattern 1
<043.784632> Configuration->tone_BetweenDigitsInterval 100
<043.784638> Configuration->pulse_BetweenDigitsInterval 800
<043.784643> DTMF_Gain1 = 13014
<043.784648> DTMF_Gain2 = 16384
<043.784654> AnalyzeDialString: Updated 17 May 1999 00:50
<043.784659> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<043.784664> Dial String Syntax is VALID
<043.784669> GetNoAnswerTimeOut. 60
<043.784675> WAIT DIAL TIMEOUT = 5
<043.784680> CALLPROG_Dial was exited.
<043.784685> call: create RC: 9600 <-> 8000...
<043.784691> slamr0: modem_start..
<043.784697> slamr0: modem set state: 1 --> 2...
<043.784702> slamr0: new state: DP_ESTAB
<043.784708> main: modemap_ioctl: cmd 8, arg 3...
<043.784715> slamr0: modem set hook: 0 --> 1...
<043.784721> main: modemap_ioctl: cmd 2, arg 1...
<043.784729> err: slamr0: modem start = -1: cannot start device.
<043.784735> slamr0: modem_stop..
<043.784740> slamr0: modem set hook: 0 --> 0...
<043.784746> main: modemap_ioctl: cmd 8, arg 0...
<043.784752> call: delete...
<043.784757> Dialer was aborted.
<043.784762> CALLPROG_Delete is entered
<043.784767> cadence_delete with CADENCE_DIAL_OBJ is invoked
<043.784772> cadence_delete with CADENCE_OBJ is invoked
<043.784778> CALLPROG_Delete is exited
<043.784784> slamr0: modem set state: 2 --> 1...
<043.784789> slamr0: new state: MODEM_IDLE
<043.784795> slamr0: modem report result: 3 (NO CARRIER)
<043.784805> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<044.088386> slamr0: run cmd: ATDT7072000
<044.088396> slamr0: modem dial: T7072000...
<044.088402> slamr0: modem_dial_start...
<044.088408> call: create...
<044.088415> CallProgFP_Create >>
<044.088420> APPLY_FILTER = 0
<044.088426> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<044.088432> ============> 6
<044.088438> Cadence: Busy Tone loose detection is 0

<044.088444> TYPE BUSY
<044.088449> Filter index 6
<044.088454> Filter SubIndex 0
<044.088459> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<044.088464> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<044.088470> OFF_TIME_THAT_RESETS_CYCLE 90
<044.088475> BUFFER LENGTH 160 samples.
<044.088480> INTEGRATION_LENGTH 0[ms]
<044.088486> LEVEL 96
<044.088492> INTEGRATION_TIME = 0 Buffers.
<044.088498> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<044.088504> TYPE DIAL
<044.088509> Filter index 5
<044.088514> Filter SubIndex 0
<044.088519> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<044.088524> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<044.088530> OFF_TIME_THAT_RESETS_CYCLE 0
<044.088535> BUFFER LENGTH 666 samples.
<044.088540> INTEGRATION_LENGTH 2500[ms]
<044.088546> LEVEL 96
<044.088551> INTEGRATION_TIME = 28 Buffers.
<044.088558> CALLPROG Create <<
<044.088563> CALLPROG Dialing T7072000
<044.088569> Configuration->tone_DigitLength 100
<044.088574> Configuration->pulse_OffHookTime 36
<044.088580> Configuration->pulse_OnHookTime 64
<044.088585> Configuration->dialPauseTime 2
<044.088590> Configuration->flashTime 50
<044.088595> Configuration->toneOrPulseFlag 0
<044.088600> Configuration->dialModifierValidationFlag 0
<044.088606> Configuration->ABCD_PermittedFlag 0
<044.088611> Configuration->pulseAndToneInSameStringPermittedFlag 0
<044.088617> Configuration->callingToneFlag 0
<044.088622> Configuration->commaPauseDurLimit 255
<044.088627> Configuration->digitPattern 1
<044.088632> Configuration->tone_BetweenDigitsInterval 100
<044.088637> Configuration->pulse_BetweenDigitsInterval 800
<044.088643> DTMF_Gain1 = 13014
<044.088648> DTMF_Gain2 = 16384
<044.088653> AnalyzeDialString: Updated 17 May 1999 00:50
<044.088659> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<044.088664> Dial String Syntax is VALID
<044.088670> GetNoAnswerTimeOut. 60
<044.088675> WAIT DIAL TIMEOUT = 5
<044.088680> CALLPROG_Dial was exited.
<044.088685> call: create RC: 9600 <-> 8000...
<044.088692> slamr0: modem_start..
<044.088697> slamr0: modem set state: 1 --> 2...
<044.088703> slamr0: new state: DP_ESTAB
<044.088709> main: modemap_ioctl: cmd 8, arg 3...
<044.088717> slamr0: modem set hook: 0 --> 1...
<044.088723> main: modemap_ioctl: cmd 2, arg 1...
<044.088731> err: slamr0: modem start = -1: cannot start device.
<044.088737> slamr0: modem_stop..
<044.088742> slamr0: modem set hook: 0 --> 0...
<044.088748> main: modemap_ioctl: cmd 8, arg 0...
<044.088755> call: delete...
<044.088760> Dialer was aborted.
<044.088764> CALLPROG_Delete is entered
<044.088769> cadence_delete with CADENCE_DIAL_OBJ is invoked
<044.088775> cadence_delete with CADENCE_OBJ is invoked
<044.088780> CALLPROG_Delete is exited
<044.088786> slamr0: modem set state: 2 --> 1...
<044.088792> slamr0: new state: MODEM_IDLE
<044.088797> slamr0: modem report result: 3 (NO CARRIER)
<044.088807> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<044.392385> slamr0: run cmd: ATDT7072000
<044.392397> slamr0: modem dial: T7072000...
<044.392403> slamr0: modem_dial_start...
<044.392408> call: create...
<044.392415> CallProgFP_Create >>
<044.392420> APPLY_FILTER = 0
<044.392427> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<044.392433> ============> 6
<044.392438> Cadence: Busy Tone loose detection is 0

<044.392444> TYPE BUSY
<044.392449> Filter index 6
<044.392454> Filter SubIndex 0
<044.392459> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<044.392465> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<044.392470> OFF_TIME_THAT_RESETS_CYCLE 90
<044.392476> BUFFER LENGTH 160 samples.
<044.392481> INTEGRATION_LENGTH 0[ms]
<044.392486> LEVEL 96
<044.392492> INTEGRATION_TIME = 0 Buffers.
<044.392498> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<044.392505> TYPE DIAL
<044.392509> Filter index 5
<044.392514> Filter SubIndex 0
<044.392519> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<044.392525> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<044.392530> OFF_TIME_THAT_RESETS_CYCLE 0
<044.392535> BUFFER LENGTH 666 samples.
<044.392540> INTEGRATION_LENGTH 2500[ms]
<044.392546> LEVEL 96
<044.392551> INTEGRATION_TIME = 28 Buffers.
<044.392558> CALLPROG Create <<
<044.392563> CALLPROG Dialing T7072000
<044.392569> Configuration->tone_DigitLength 100
<044.392574> Configuration->pulse_OffHookTime 36
<044.392579> Configuration->pulse_OnHookTime 64
<044.392585> Configuration->dialPauseTime 2
<044.392590> Configuration->flashTime 50
<044.392595> Configuration->toneOrPulseFlag 0
<044.392600> Configuration->dialModifierValidationFlag 0
<044.392605> Configuration->ABCD_PermittedFlag 0
<044.392611> Configuration->pulseAndToneInSameStringPermittedFlag 0
<044.392616> Configuration->callingToneFlag 0
<044.392621> Configuration->commaPauseDurLimit 255
<044.392626> Configuration->digitPattern 1
<044.392632> Configuration->tone_BetweenDigitsInterval 100
<044.392637> Configuration->pulse_BetweenDigitsInterval 800
<044.392642> DTMF_Gain1 = 13014
<044.392647> DTMF_Gain2 = 16384
<044.392653> AnalyzeDialString: Updated 17 May 1999 00:50
<044.392658> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<044.392664> Dial String Syntax is VALID
<044.392669> GetNoAnswerTimeOut. 60
<044.392674> WAIT DIAL TIMEOUT = 5
<044.392680> CALLPROG_Dial was exited.
<044.392685> call: create RC: 9600 <-> 8000...
<044.392691> slamr0: modem_start..
<044.392697> slamr0: modem set state: 1 --> 2...
<044.392702> slamr0: new state: DP_ESTAB
<044.392708> main: modemap_ioctl: cmd 8, arg 3...
<044.392716> slamr0: modem set hook: 0 --> 1...
<044.392722> main: modemap_ioctl: cmd 2, arg 1...
<044.392730> err: slamr0: modem start = -1: cannot start device.
<044.392736> slamr0: modem_stop..
<044.392741> slamr0: modem set hook: 0 --> 0...
<044.392747> main: modemap_ioctl: cmd 8, arg 0...
<044.392753> call: delete...
<044.392758> Dialer was aborted.
<044.392763> CALLPROG_Delete is entered
<044.392768> cadence_delete with CADENCE_DIAL_OBJ is invoked
<044.392774> cadence_delete with CADENCE_OBJ is invoked
<044.392780> CALLPROG_Delete is exited
<044.392785> slamr0: modem set state: 2 --> 1...
<044.392791> slamr0: new state: MODEM_IDLE
<044.392796> slamr0: modem report result: 3 (NO CARRIER)
<044.392807> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Fri Nov 20 22:50:44 2009
<044.564607> main: termios changed.
<044.564617> slamr0: update termios...
<044.564647> main: pty closed.
]0;root@localhost:~ [root@localhost ~]# killall -9 slmodemd
]0;root@localhost:~ [root@localhost ~]# modo [Kprobe -r sm [Kal [K [Klamr
[1]+ Killed slmodemd -c USA /dev/slamr0 --debug=2
]0;root@localhost:~ [root@localhost ~]# modprobe -r ungrab-winmodem
]0;root@localhost:~ [root@localhost ~]# mop [Kdprobe sla [K [K
[Kungrab-winmodem
]0;root@localhost:~ [root@localhost ~]# modprobe slamr
]0;root@localhost:~ [root@localhost ~]# s [K modprobe slamr
ungrab-winmodem -r ungrab-winmodem
[10Pslamr killall -9 slmodemd
[12Pwvdial [K slmodemd -c USA /dev/slamr0 --debug=2 &
[1] 19977
]0;root@localhost:~ [root@localhost ~]# SmartLink Soft Modem: version
2.9.11 Nov 20 2009 19:20:32
<088.787855> SmartLink Soft Modem: version 2.9.11 Nov 20 2009 19:20:32
<088.787960> slamr0: startup modem...
<088.788560> slamr0: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
modem `slamr0' created. TTY is `/dev/pts/4'
<088.788724> open file: /var/lib/slmodem/data.slamr0...
<088.790564> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.

]0;root@localhost:~ [root@localhost ~]# slmodemd -c USA /dev/slamr0 --debug=2 &
[C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C
[25Pmodprobe slamr ungrab-winmodem -r
ungrab-winmodem [10Pslamr killall -9
slmodemd [12Pwvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.<092.770120> main: termios changed.
<092.770135> slamr0: update termios...

--> Initializing modem.
<092.830097> main: termios changed.
<092.830109> slamr0: update termios...
--> Sending: ATZ
<092.932123> slamr0: run cmd: ATZ
<092.932135> slamr0: modem reset...
<092.932141> slamr0: modem set state: 1 --> 1...
<092.932148> slamr0: modem set mode: -> 0...
<092.932154> slamr0: modem report result: 0 (OK)
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
<093.034147> slamr0: run cmd: ATQ0V1E1S0=0X3&C1&D2+MS=90
<093.034164> slamr0: modem report result: 0 (OK)
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
OK
--> Modem initialized.
--> Sending: ATDT7072000
--> Waiting for carrier.
<093.136138> slamr0: run cmd: ATDT7072000
<093.136151> slamr0: modem dial: T7072000...
<093.136157> slamr0: modem_dial_start...
<093.136163> call: create...
<093.136171> CallProgFP_Create >>
<093.136176> APPLY_FILTER = 0
<093.136183> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.136189> ============> 6
<093.136194> Cadence: Busy Tone loose detection is 0

<093.136210> TYPE BUSY
<093.136216> Filter index 6
<093.136220> Filter SubIndex 0
<093.136225> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<093.136231> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<093.136237> OFF_TIME_THAT_RESETS_CYCLE 90
<093.136242> BUFFER LENGTH 160 samples.
<093.136247> INTEGRATION_LENGTH 0[ms]
<093.136252> LEVEL 96
<093.136259> INTEGRATION_TIME = 0 Buffers.
<093.136265> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.136272> TYPE DIAL
<093.136276> Filter index 5
<093.136281> Filter SubIndex 0
<093.136286> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<093.136291> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<093.136297> OFF_TIME_THAT_RESETS_CYCLE 0
<093.136302> BUFFER LENGTH 666 samples.
<093.136307> INTEGRATION_LENGTH 2500[ms]
<093.136312> LEVEL 96
<093.136318> INTEGRATION_TIME = 28 Buffers.
<093.136324> CALLPROG Create <<
<093.136330> CALLPROG Dialing T7072000
<093.136335> Configuration->tone_DigitLength 100
<093.136341> Configuration->pulse_OffHookTime 36
<093.136346> Configuration->pulse_OnHookTime 64
<093.136351> Configuration->dialPauseTime 2
<093.136356> Configuration->flashTime 50
<093.136361> Configuration->toneOrPulseFlag 0
<093.136367> Configuration->dialModifierValidationFlag 0
<093.136372> Configuration->ABCD_PermittedFlag 0
<093.136377> Configuration->pulseAndToneInSameStringPermittedFlag 0
<093.136383> Configuration->callingToneFlag 0
<093.136388> Configuration->commaPauseDurLimit 255
<093.136393> Configuration->digitPattern 1
<093.136398> Configuration->tone_BetweenDigitsInterval 100
<093.136403> Configuration->pulse_BetweenDigitsInterval 800
<093.136408> DTMF_Gain1 = 13014
<093.136414> DTMF_Gain2 = 16384
<093.136419> AnalyzeDialString: Updated 17 May 1999 00:50
<093.136425> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<093.136430> Dial String Syntax is VALID
<093.136437> GetNoAnswerTimeOut. 60
<093.136442> WAIT DIAL TIMEOUT = 5
<093.136447> CALLPROG_Dial was exited.
<093.136452> call: create RC: 9600 <-> 8000...
<093.136459> slamr0: modem_start..
<093.136464> slamr0: modem set state: 1 --> 2...
<093.136470> slamr0: new state: DP_ESTAB
<093.136476> main: modemap_ioctl: cmd 8, arg 3...
<093.136486> slamr0: modem set hook: 0 --> 1...
<093.136492> main: modemap_ioctl: cmd 2, arg 1...
<093.136501> err: slamr0: modem start = -1: cannot start device.
<093.136508> slamr0: modem_stop..
<093.136513> slamr0: modem set hook: 0 --> 0...
<093.136518> main: modemap_ioctl: cmd 8, arg 0...
<093.136525> call: delete...
<093.136530> Dialer was aborted.
<093.136535> CALLPROG_Delete is entered
<093.136540> cadence_delete with CADENCE_DIAL_OBJ is invoked
<093.136546> cadence_delete with CADENCE_OBJ is invoked
<093.136551> CALLPROG_Delete is exited
<093.136557> slamr0: modem set state: 2 --> 1...
<093.136563> slamr0: new state: MODEM_IDLE
<093.136568> slamr0: modem report result: 3 (NO CARRIER)
<093.136578> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<093.440137> slamr0: run cmd: ATDT7072000
<093.440149> slamr0: modem dial: T7072000...
<093.440155> slamr0: modem_dial_start...
<093.440161> call: create...
<093.440167> CallProgFP_Create >>
<093.440173> APPLY_FILTER = 0
<093.440178> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.440184> ============> 6
<093.440190> Cadence: Busy Tone loose detection is 0

<093.440196> TYPE BUSY
<093.440206> Filter index 6
<093.440211> Filter SubIndex 0
<093.440216> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<093.440222> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<093.440227> OFF_TIME_THAT_RESETS_CYCLE 90
<093.440232> BUFFER LENGTH 160 samples.
<093.440238> INTEGRATION_LENGTH 0[ms]
<093.440243> LEVEL 96
<093.440249> INTEGRATION_TIME = 0 Buffers.
<093.440255> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.440262> TYPE DIAL
<093.440266> Filter index 5
<093.440271> Filter SubIndex 0
<093.440276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<093.440281> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<093.440287> OFF_TIME_THAT_RESETS_CYCLE 0
<093.440292> BUFFER LENGTH 666 samples.
<093.440297> INTEGRATION_LENGTH 2500[ms]
<093.440302> LEVEL 96
<093.440307> INTEGRATION_TIME = 28 Buffers.
<093.440314> CALLPROG Create <<
<093.440319> CALLPROG Dialing T7072000
<093.440324> Configuration->tone_DigitLength 100
<093.440330> Configuration->pulse_OffHookTime 36
<093.440335> Configuration->pulse_OnHookTime 64
<093.440340> Configuration->dialPauseTime 2
<093.440345> Configuration->flashTime 50
<093.440350> Configuration->toneOrPulseFlag 0
<093.440355> Configuration->dialModifierValidationFlag 0
<093.440360> Configuration->ABCD_PermittedFlag 0
<093.440365> Configuration->pulseAndToneInSameStringPermittedFlag 0
<093.440371> Configuration->callingToneFlag 0
<093.440376> Configuration->commaPauseDurLimit 255
<093.440381> Configuration->digitPattern 1
<093.440386> Configuration->tone_BetweenDigitsInterval 100
<093.440391> Configuration->pulse_BetweenDigitsInterval 800
<093.440397> DTMF_Gain1 = 13014
<093.440402> DTMF_Gain2 = 16384
<093.440407> AnalyzeDialString: Updated 17 May 1999 00:50
<093.440412> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<093.440418> Dial String Syntax is VALID
<093.440423> GetNoAnswerTimeOut. 60
<093.440428> WAIT DIAL TIMEOUT = 5
<093.440433> CALLPROG_Dial was exited.
<093.440438> call: create RC: 9600 <-> 8000...
<093.440445> slamr0: modem_start..
<093.440450> slamr0: modem set state: 1 --> 2...
<093.440456> slamr0: new state: DP_ESTAB
<093.440461> main: modemap_ioctl: cmd 8, arg 3...
<093.440469> slamr0: modem set hook: 0 --> 1...
<093.440475> main: modemap_ioctl: cmd 2, arg 1...
<093.440482> err: slamr0: modem start = -1: cannot start device.
<093.440488> slamr0: modem_stop..
<093.440493> slamr0: modem set hook: 0 --> 0...
<093.440499> main: modemap_ioctl: cmd 8, arg 0...
<093.440505> call: delete...
<093.440510> Dialer was aborted.
<093.440515> CALLPROG_Delete is entered
<093.440520> cadence_delete with CADENCE_DIAL_OBJ is invoked
<093.440526> cadence_delete with CADENCE_OBJ is invoked
<093.440531> CALLPROG_Delete is exited
<093.440537> slamr0: modem set state: 2 --> 1...
<093.440543> slamr0: new state: MODEM_IDLE
<093.440548> slamr0: modem report result: 3 (NO CARRIER)
<093.440558> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<093.744140> slamr0: run cmd: ATDT7072000
<093.744152> slamr0: modem dial: T7072000...
<093.744158> slamr0: modem_dial_start...
<093.744163> call: create...
<093.744170> CallProgFP_Create >>
<093.744175> APPLY_FILTER = 0
<093.744180> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.744186> ============> 6
<093.744192> Cadence: Busy Tone loose detection is 0

<093.744207> TYPE BUSY
<093.744213> Filter index 6
<093.744218> Filter SubIndex 0
<093.744223> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<093.744228> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<093.744234> OFF_TIME_THAT_RESETS_CYCLE 90
<093.744239> BUFFER LENGTH 160 samples.
<093.744244> INTEGRATION_LENGTH 0[ms]
<093.744249> LEVEL 96
<093.744256> INTEGRATION_TIME = 0 Buffers.
<093.744262> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<093.744268> TYPE DIAL
<093.744273> Filter index 5
<093.744278> Filter SubIndex 0
<093.744283> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<093.744288> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<093.744293> OFF_TIME_THAT_RESETS_CYCLE 0
<093.744298> BUFFER LENGTH 666 samples.
<093.744303> INTEGRATION_LENGTH 2500[ms]
<093.744308> LEVEL 96
<093.744314> INTEGRATION_TIME = 28 Buffers.
<093.744320> CALLPROG Create <<
<093.744325> CALLPROG Dialing T7072000
<093.744331> Configuration->tone_DigitLength 100
<093.744336> Configuration->pulse_OffHookTime 36
<093.744341> Configuration->pulse_OnHookTime 64
<093.744346> Configuration->dialPauseTime 2
<093.744351> Configuration->flashTime 50
<093.744356> Configuration->toneOrPulseFlag 0
<093.744361> Configuration->dialModifierValidationFlag 0
<093.744367> Configuration->ABCD_PermittedFlag 0
<093.744372> Configuration->pulseAndToneInSameStringPermittedFlag 0
<093.744377> Configuration->callingToneFlag 0
<093.744382> Configuration->commaPauseDurLimit 255
<093.744387> Configuration->digitPattern 1
<093.744392> Configuration->tone_BetweenDigitsInterval 100
<093.744397> Configuration->pulse_BetweenDigitsInterval 800
<093.744403> DTMF_Gain1 = 13014
<093.744408> DTMF_Gain2 = 16384
<093.744413> AnalyzeDialString: Updated 17 May 1999 00:50
<093.744419> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<093.744424> Dial String Syntax is VALID
<093.744429> GetNoAnswerTimeOut. 60
<093.744435> WAIT DIAL TIMEOUT = 5
<093.744439> CALLPROG_Dial was exited.
<093.744444> call: create RC: 9600 <-> 8000...
<093.744451> slamr0: modem_start..
<093.744456> slamr0: modem set state: 1 --> 2...
<093.744462> slamr0: new state: DP_ESTAB
<093.744467> main: modemap_ioctl: cmd 8, arg 3...
<093.744474> slamr0: modem set hook: 0 --> 1...
<093.744480> main: modemap_ioctl: cmd 2, arg 1...
<093.744488> err: slamr0: modem start = -1: cannot start device.
<093.744494> slamr0: modem_stop..
<093.744499> slamr0: modem set hook: 0 --> 0...
<093.744504> main: modemap_ioctl: cmd 8, arg 0...
<093.744510> call: delete...
<093.744515> Dialer was aborted.
<093.744520> CALLPROG_Delete is entered
<093.744525> cadence_delete with CADENCE_DIAL_OBJ is invoked
<093.744531> cadence_delete with CADENCE_OBJ is invoked
<093.744536> CALLPROG_Delete is exited
<093.744542> slamr0: modem set state: 2 --> 1...
<093.744548> slamr0: new state: MODEM_IDLE
<093.744553> slamr0: modem report result: 3 (NO CARRIER)
<093.744563> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<094.048137> slamr0: run cmd: ATDT7072000
<094.048150> slamr0: modem dial: T7072000...
<094.048156> slamr0: modem_dial_start...
<094.048161> call: create...
<094.048169> CallProgFP_Create >>
<094.048174> APPLY_FILTER = 0
<094.048181> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.048187> ============> 6
<094.048192> Cadence: Busy Tone loose detection is 0

<094.048204> TYPE BUSY
<094.048209> Filter index 6
<094.048214> Filter SubIndex 0
<094.048219> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<094.048224> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<094.048230> OFF_TIME_THAT_RESETS_CYCLE 90
<094.048235> BUFFER LENGTH 160 samples.
<094.048241> INTEGRATION_LENGTH 0[ms]
<094.048246> LEVEL 96
<094.048252> INTEGRATION_TIME = 0 Buffers.
<094.048259> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.048265> TYPE DIAL
<094.048270> Filter index 5
<094.048275> Filter SubIndex 0
<094.048280> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<094.048285> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<094.048291> OFF_TIME_THAT_RESETS_CYCLE 0
<094.048296> BUFFER LENGTH 666 samples.
<094.048301> INTEGRATION_LENGTH 2500[ms]
<094.048306> LEVEL 96
<094.048312> INTEGRATION_TIME = 28 Buffers.
<094.048319> CALLPROG Create <<
<094.048324> CALLPROG Dialing T7072000
<094.048330> Configuration->tone_DigitLength 100
<094.048335> Configuration->pulse_OffHookTime 36
<094.048341> Configuration->pulse_OnHookTime 64
<094.048346> Configuration->dialPauseTime 2
<094.048351> Configuration->flashTime 50
<094.048356> Configuration->toneOrPulseFlag 0
<094.048361> Configuration->dialModifierValidationFlag 0
<094.048366> Configuration->ABCD_PermittedFlag 0
<094.048372> Configuration->pulseAndToneInSameStringPermittedFlag 0
<094.048377> Configuration->callingToneFlag 0
<094.048383> Configuration->commaPauseDurLimit 255
<094.048388> Configuration->digitPattern 1
<094.048393> Configuration->tone_BetweenDigitsInterval 100
<094.048398> Configuration->pulse_BetweenDigitsInterval 800
<094.048404> DTMF_Gain1 = 13014
<094.048409> DTMF_Gain2 = 16384
<094.048414> AnalyzeDialString: Updated 17 May 1999 00:50
<094.048419> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<094.048425> Dial String Syntax is VALID
<094.048430> GetNoAnswerTimeOut. 60
<094.048436> WAIT DIAL TIMEOUT = 5
<094.048441> CALLPROG_Dial was exited.
<094.048446> call: create RC: 9600 <-> 8000...
<094.048452> slamr0: modem_start..
<094.048458> slamr0: modem set state: 1 --> 2...
<094.048464> slamr0: new state: DP_ESTAB
<094.048469> main: modemap_ioctl: cmd 8, arg 3...
<094.048478> slamr0: modem set hook: 0 --> 1...
<094.048484> main: modemap_ioctl: cmd 2, arg 1...
<094.048492> err: slamr0: modem start = -1: cannot start device.
<094.048498> slamr0: modem_stop..
<094.048503> slamr0: modem set hook: 0 --> 0...
<094.048509> main: modemap_ioctl: cmd 8, arg 0...
<094.048515> call: delete...
<094.048520> Dialer was aborted.
<094.048525> CALLPROG_Delete is entered
<094.048530> cadence_delete with CADENCE_DIAL_OBJ is invoked
<094.048536> cadence_delete with CADENCE_OBJ is invoked
<094.048541> CALLPROG_Delete is exited
<094.048547> slamr0: modem set state: 2 --> 1...
<094.048553> slamr0: new state: MODEM_IDLE
<094.048558> slamr0: modem report result: 3 (NO CARRIER)
<094.048569> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<094.352137> slamr0: run cmd: ATDT7072000
<094.352151> slamr0: modem dial: T7072000...
<094.352157> slamr0: modem_dial_start...
<094.352162> call: create...
<094.352169> CallProgFP_Create >>
<094.352175> APPLY_FILTER = 0
<094.352181> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.352187> ============> 6
<094.352192> Cadence: Busy Tone loose detection is 0

<094.352203> TYPE BUSY
<094.352209> Filter index 6
<094.352214> Filter SubIndex 0
<094.352219> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<094.352224> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<094.352230> OFF_TIME_THAT_RESETS_CYCLE 90
<094.352235> BUFFER LENGTH 160 samples.
<094.352240> INTEGRATION_LENGTH 0[ms]
<094.352245> LEVEL 96
<094.352252> INTEGRATION_TIME = 0 Buffers.
<094.352258> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.352264> TYPE DIAL
<094.352269> Filter index 5
<094.352273> Filter SubIndex 0
<094.352278> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<094.352284> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<094.352289> OFF_TIME_THAT_RESETS_CYCLE 0
<094.352294> BUFFER LENGTH 666 samples.
<094.352299> INTEGRATION_LENGTH 2500[ms]
<094.352304> LEVEL 96
<094.352310> INTEGRATION_TIME = 28 Buffers.
<094.352316> CALLPROG Create <<
<094.352321> CALLPROG Dialing T7072000
<094.352327> Configuration->tone_DigitLength 100
<094.352332> Configuration->pulse_OffHookTime 36
<094.352338> Configuration->pulse_OnHookTime 64
<094.352343> Configuration->dialPauseTime 2
<094.352348> Configuration->flashTime 50
<094.352353> Configuration->toneOrPulseFlag 0
<094.352358> Configuration->dialModifierValidationFlag 0
<094.352363> Configuration->ABCD_PermittedFlag 0
<094.352368> Configuration->pulseAndToneInSameStringPermittedFlag 0
<094.352374> Configuration->callingToneFlag 0
<094.352379> Configuration->commaPauseDurLimit 255
<094.352384> Configuration->digitPattern 1
<094.352389> Configuration->tone_BetweenDigitsInterval 100
<094.352394> Configuration->pulse_BetweenDigitsInterval 800
<094.352400> DTMF_Gain1 = 13014
<094.352405> DTMF_Gain2 = 16384
<094.352410> AnalyzeDialString: Updated 17 May 1999 00:50
<094.352415> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<094.352420> Dial String Syntax is VALID
<094.352426> GetNoAnswerTimeOut. 60
<094.352431> WAIT DIAL TIMEOUT = 5
<094.352436> CALLPROG_Dial was exited.
<094.352441> call: create RC: 9600 <-> 8000...
<094.352447> slamr0: modem_start..
<094.352453> slamr0: modem set state: 1 --> 2...
<094.352459> slamr0: new state: DP_ESTAB
<094.352464> main: modemap_ioctl: cmd 8, arg 3...
<094.352471> slamr0: modem set hook: 0 --> 1...
<094.352477> main: modemap_ioctl: cmd 2, arg 1...
<094.352485> err: slamr0: modem start = -1: cannot start device.
<094.352491> slamr0: modem_stop..
<094.352496> slamr0: modem set hook: 0 --> 0...
<094.352501> main: modemap_ioctl: cmd 8, arg 0...
<094.352508> call: delete...
<094.352513> Dialer was aborted.
<094.352518> CALLPROG_Delete is entered
<094.352522> cadence_delete with CADENCE_DIAL_OBJ is invoked
<094.352528> cadence_delete with CADENCE_OBJ is invoked
<094.352533> CALLPROG_Delete is exited
<094.352539> slamr0: modem set state: 2 --> 1...
<094.352545> slamr0: new state: MODEM_IDLE
<094.352550> slamr0: modem report result: 3 (NO CARRIER)
<094.352560> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<094.656137> slamr0: run cmd: ATDT7072000
<094.656149> slamr0: modem dial: T7072000...
<094.656156> slamr0: modem_dial_start...
<094.656161> call: create...
<094.656167> CallProgFP_Create >>
<094.656172> APPLY_FILTER = 0
<094.656178> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.656184> ============> 6
<094.656190> Cadence: Busy Tone loose detection is 0

<094.656196> TYPE BUSY
<094.656206> Filter index 6
<094.656211> Filter SubIndex 0
<094.656216> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<094.656222> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<094.656227> OFF_TIME_THAT_RESETS_CYCLE 90
<094.656232> BUFFER LENGTH 160 samples.
<094.656238> INTEGRATION_LENGTH 0[ms]
<094.656243> LEVEL 96
<094.656249> INTEGRATION_TIME = 0 Buffers.
<094.656255> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.656261> TYPE DIAL
<094.656266> Filter index 5
<094.656271> Filter SubIndex 0
<094.656276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<094.656281> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<094.656287> OFF_TIME_THAT_RESETS_CYCLE 0
<094.656292> BUFFER LENGTH 666 samples.
<094.656297> INTEGRATION_LENGTH 2500[ms]
<094.656302> LEVEL 96
<094.656307> INTEGRATION_TIME = 28 Buffers.
<094.656314> CALLPROG Create <<
<094.656319> CALLPROG Dialing T7072000
<094.656324> Configuration->tone_DigitLength 100
<094.656330> Configuration->pulse_OffHookTime 36
<094.656335> Configuration->pulse_OnHookTime 64
<094.656340> Configuration->dialPauseTime 2
<094.656345> Configuration->flashTime 50
<094.656350> Configuration->toneOrPulseFlag 0
<094.656355> Configuration->dialModifierValidationFlag 0
<094.656360> Configuration->ABCD_PermittedFlag 0
<094.656365> Configuration->pulseAndToneInSameStringPermittedFlag 0
<094.656371> Configuration->callingToneFlag 0
<094.656376> Configuration->commaPauseDurLimit 255
<094.656381> Configuration->digitPattern 1
<094.656386> Configuration->tone_BetweenDigitsInterval 100
<094.656391> Configuration->pulse_BetweenDigitsInterval 800
<094.656397> DTMF_Gain1 = 13014
<094.656402> DTMF_Gain2 = 16384
<094.656407> AnalyzeDialString: Updated 17 May 1999 00:50
<094.656413> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<094.656418> Dial String Syntax is VALID
<094.656423> GetNoAnswerTimeOut. 60
<094.656428> WAIT DIAL TIMEOUT = 5
<094.656433> CALLPROG_Dial was exited.
<094.656438> call: create RC: 9600 <-> 8000...
<094.656445> slamr0: modem_start..
<094.656450> slamr0: modem set state: 1 --> 2...
<094.656456> slamr0: new state: DP_ESTAB
<094.656461> main: modemap_ioctl: cmd 8, arg 3...
<094.656468> slamr0: modem set hook: 0 --> 1...
<094.656474> main: modemap_ioctl: cmd 2, arg 1...
<094.656482> err: slamr0: modem start = -1: cannot start device.
<094.656488> slamr0: modem_stop..
<094.656493> slamr0: modem set hook: 0 --> 0...
<094.656498> main: modemap_ioctl: cmd 8, arg 0...
<094.656505> call: delete...
<094.656510> Dialer was aborted.
<094.656515> CALLPROG_Delete is entered
<094.656519> cadence_delete with CADENCE_DIAL_OBJ is invoked
<094.656525> cadence_delete with CADENCE_OBJ is invoked
<094.656530> CALLPROG_Delete is exited
<094.656536> slamr0: modem set state: 2 --> 1...
<094.656542> slamr0: new state: MODEM_IDLE
<094.656547> slamr0: modem report result: 3 (NO CARRIER)
<094.656557> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<094.960138> slamr0: run cmd: ATDT7072000
<094.960152> slamr0: modem dial: T7072000...
<094.960158> slamr0: modem_dial_start...
<094.960163> call: create...
<094.960170> CallProgFP_Create >>
<094.960176> APPLY_FILTER = 0
<094.960182> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.960188> ============> 6
<094.960193> Cadence: Busy Tone loose detection is 0

<094.960205> TYPE BUSY
<094.960210> Filter index 6
<094.960215> Filter SubIndex 0
<094.960220> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<094.960225> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<094.960231> OFF_TIME_THAT_RESETS_CYCLE 90
<094.960236> BUFFER LENGTH 160 samples.
<094.960241> INTEGRATION_LENGTH 0[ms]
<094.960246> LEVEL 96
<094.960253> INTEGRATION_TIME = 0 Buffers.
<094.960259> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<094.960265> TYPE DIAL
<094.960270> Filter index 5
<094.960275> Filter SubIndex 0
<094.960280> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<094.960285> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<094.960290> OFF_TIME_THAT_RESETS_CYCLE 0
<094.960296> BUFFER LENGTH 666 samples.
<094.960301> INTEGRATION_LENGTH 2500[ms]
<094.960306> LEVEL 96
<094.960311> INTEGRATION_TIME = 28 Buffers.
<094.960318> CALLPROG Create <<
<094.960323> CALLPROG Dialing T7072000
<094.960329> Configuration->tone_DigitLength 100
<094.960334> Configuration->pulse_OffHookTime 36
<094.960339> Configuration->pulse_OnHookTime 64
<094.960345> Configuration->dialPauseTime 2
<094.960350> Configuration->flashTime 50
<094.960355> Configuration->toneOrPulseFlag 0
<094.960360> Configuration->dialModifierValidationFlag 0
<094.960365> Configuration->ABCD_PermittedFlag 0
<094.960370> Configuration->pulseAndToneInSameStringPermittedFlag 0
<094.960376> Configuration->callingToneFlag 0
<094.960381> Configuration->commaPauseDurLimit 255
<094.960386> Configuration->digitPattern 1
<094.960391> Configuration->tone_BetweenDigitsInterval 100
<094.960396> Configuration->pulse_BetweenDigitsInterval 800
<094.960402> DTMF_Gain1 = 13014
<094.960407> DTMF_Gain2 = 16384
<094.960412> AnalyzeDialString: Updated 17 May 1999 00:50
<094.960418> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<094.960423> Dial String Syntax is VALID
<094.960429> GetNoAnswerTimeOut. 60
<094.960434> WAIT DIAL TIMEOUT = 5
<094.960439> CALLPROG_Dial was exited.
<094.960444> call: create RC: 9600 <-> 8000...
<094.960451> slamr0: modem_start..
<094.960456> slamr0: modem set state: 1 --> 2...
<094.960462> slamr0: new state: DP_ESTAB
<094.960467> main: modemap_ioctl: cmd 8, arg 3...
<094.960475> slamr0: modem set hook: 0 --> 1...
<094.960481> main: modemap_ioctl: cmd 2, arg 1...
<094.960488> err: slamr0: modem start = -1: cannot start device.
<094.960495> slamr0: modem_stop..
<094.960500> slamr0: modem set hook: 0 --> 0...
<094.960505> main: modemap_ioctl: cmd 8, arg 0...
<094.960512> call: delete...
<094.960517> Dialer was aborted.
<094.960522> CALLPROG_Delete is entered
<094.960526> cadence_delete with CADENCE_DIAL_OBJ is invoked
<094.960532> cadence_delete with CADENCE_OBJ is invoked
<094.960538> CALLPROG_Delete is exited
<094.960544> slamr0: modem set state: 2 --> 1...
<094.960550> slamr0: new state: MODEM_IDLE
<094.960555> slamr0: modem report result: 3 (NO CARRIER)
<094.960565> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<095.264143> slamr0: run cmd: ATDT7072000
<095.264162> slamr0: modem dial: T7072000...
<095.264168> slamr0: modem_dial_start...
<095.264174> call: create...
<095.264182> CallProgFP_Create >>
<095.264188> APPLY_FILTER = 0
<095.264194> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.264208> ============> 6
<095.264214> Cadence: Busy Tone loose detection is 0

<095.264220> TYPE BUSY
<095.264225> Filter index 6
<095.264230> Filter SubIndex 0
<095.264235> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<095.264241> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<095.264246> OFF_TIME_THAT_RESETS_CYCLE 90
<095.264255> BUFFER LENGTH 160 samples.
<095.264259> INTEGRATION_LENGTH 0[ms]
<095.264262> LEVEL 96
<095.264267> INTEGRATION_TIME = 0 Buffers.
<095.264271> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.264275> TYPE DIAL
<095.264279> Filter index 5
<095.264282> Filter SubIndex 0
<095.264285> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<095.264289> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<095.264292> OFF_TIME_THAT_RESETS_CYCLE 0
<095.264296> BUFFER LENGTH 666 samples.
<095.264299> INTEGRATION_LENGTH 2500[ms]
<095.264303> LEVEL 96
<095.264306> INTEGRATION_TIME = 28 Buffers.
<095.264311> CALLPROG Create <<
<095.264314> CALLPROG Dialing T7072000
<095.264319> Configuration->tone_DigitLength 100
<095.264322> Configuration->pulse_OffHookTime 36
<095.264326> Configuration->pulse_OnHookTime 64
<095.264329> Configuration->dialPauseTime 2
<095.264332> Configuration->flashTime 50
<095.264336> Configuration->toneOrPulseFlag 0
<095.264339> Configuration->dialModifierValidationFlag 0
<095.264343> Configuration->ABCD_PermittedFlag 0
<095.264346> Configuration->pulseAndToneInSameStringPermittedFlag 0
<095.264350> Configuration->callingToneFlag 0
<095.264353> Configuration->commaPauseDurLimit 255
<095.264357> Configuration->digitPattern 1
<095.264360> Configuration->tone_BetweenDigitsInterval 100
<095.264363> Configuration->pulse_BetweenDigitsInterval 800
<095.264367> DTMF_Gain1 = 13014
<095.264370> DTMF_Gain2 = 16384
<095.264374> AnalyzeDialString: Updated 17 May 1999 00:50
<095.264378> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<095.264381> Dial String Syntax is VALID
<095.264385> GetNoAnswerTimeOut. 60
<095.264389> WAIT DIAL TIMEOUT = 5
<095.264392> CALLPROG_Dial was exited.
<095.264395> call: create RC: 9600 <-> 8000...
<095.264400> slamr0: modem_start..
<095.264403> slamr0: modem set state: 1 --> 2...
<095.264408> slamr0: new state: DP_ESTAB
<095.264412> main: modemap_ioctl: cmd 8, arg 3...
<095.264419> slamr0: modem set hook: 0 --> 1...
<095.264423> main: modemap_ioctl: cmd 2, arg 1...
<095.264430> err: slamr0: modem start = -1: cannot start device.
<095.264434> slamr0: modem_stop..
<095.264438> slamr0: modem set hook: 0 --> 0...
<095.264441> main: modemap_ioctl: cmd 8, arg 0...
<095.264446> call: delete...
<095.264449> Dialer was aborted.
<095.264453> CALLPROG_Delete is entered
<095.264456> cadence_delete with CADENCE_DIAL_OBJ is invoked
<095.264460> cadence_delete with CADENCE_OBJ is invoked
<095.264463> CALLPROG_Delete is exited
<095.264468> slamr0: modem set state: 2 --> 1...
<095.264472> slamr0: new state: MODEM_IDLE
<095.264475> slamr0: modem report result: 3 (NO CARRIER)
<095.264482> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<095.568138> slamr0: run cmd: ATDT7072000
<095.568153> slamr0: modem dial: T7072000...
<095.568159> slamr0: modem_dial_start...
<095.568165> call: create...
<095.568172> CallProgFP_Create >>
<095.568177> APPLY_FILTER = 0
<095.568184> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.568190> ============> 6
<095.568195> Cadence: Busy Tone loose detection is 0

<095.568207> TYPE BUSY
<095.568212> Filter index 6
<095.568217> Filter SubIndex 0
<095.568222> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<095.568228> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<095.568233> OFF_TIME_THAT_RESETS_CYCLE 90
<095.568239> BUFFER LENGTH 160 samples.
<095.568249> INTEGRATION_LENGTH 0[ms]
<095.568252> LEVEL 96
<095.568257> INTEGRATION_TIME = 0 Buffers.
<095.568261> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.568265> TYPE DIAL
<095.568268> Filter index 5
<095.568271> Filter SubIndex 0
<095.568275> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<095.568278> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<095.568282> OFF_TIME_THAT_RESETS_CYCLE 0
<095.568285> BUFFER LENGTH 666 samples.
<095.568289> INTEGRATION_LENGTH 2500[ms]
<095.568292> LEVEL 96
<095.568296> INTEGRATION_TIME = 28 Buffers.
<095.568300> CALLPROG Create <<
<095.568304> CALLPROG Dialing T7072000
<095.568308> Configuration->tone_DigitLength 100
<095.568311> Configuration->pulse_OffHookTime 36
<095.568315> Configuration->pulse_OnHookTime 64
<095.568318> Configuration->dialPauseTime 2
<095.568321> Configuration->flashTime 50
<095.568325> Configuration->toneOrPulseFlag 0
<095.568328> Configuration->dialModifierValidationFlag 0
<095.568332> Configuration->ABCD_PermittedFlag 0
<095.568335> Configuration->pulseAndToneInSameStringPermittedFlag 0
<095.568339> Configuration->callingToneFlag 0
<095.568342> Configuration->commaPauseDurLimit 255
<095.568346> Configuration->digitPattern 1
<095.568349> Configuration->tone_BetweenDigitsInterval 100
<095.568352> Configuration->pulse_BetweenDigitsInterval 800
<095.568356> DTMF_Gain1 = 13014
<095.568359> DTMF_Gain2 = 16384
<095.568363> AnalyzeDialString: Updated 17 May 1999 00:50
<095.568366> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<095.568370> Dial String Syntax is VALID
<095.568374> GetNoAnswerTimeOut. 60
<095.568377> WAIT DIAL TIMEOUT = 5
<095.568380> CALLPROG_Dial was exited.
<095.568384> call: create RC: 9600 <-> 8000...
<095.568388> slamr0: modem_start..
<095.568392> slamr0: modem set state: 1 --> 2...
<095.568396> slamr0: new state: DP_ESTAB
<095.568399> main: modemap_ioctl: cmd 8, arg 3...
<095.568405> slamr0: modem set hook: 0 --> 1...
<095.568409> main: modemap_ioctl: cmd 2, arg 1...
<095.568415> err: slamr0: modem start = -1: cannot start device.
<095.568419> slamr0: modem_stop..
<095.568422> slamr0: modem set hook: 0 --> 0...
<095.568426> main: modemap_ioctl: cmd 8, arg 0...
<095.568430> call: delete...
<095.568434> Dialer was aborted.
<095.568437> CALLPROG_Delete is entered
<095.568440> cadence_delete with CADENCE_DIAL_OBJ is invoked
<095.568444> cadence_delete with CADENCE_OBJ is invoked
<095.568448> CALLPROG_Delete is exited
<095.568452> slamr0: modem set state: 2 --> 1...
<095.568456> slamr0: new state: MODEM_IDLE
<095.568459> slamr0: modem report result: 3 (NO CARRIER)
<095.568466> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<095.872137> slamr0: run cmd: ATDT7072000
<095.872150> slamr0: modem dial: T7072000...
<095.872156> slamr0: modem_dial_start...
<095.872161> call: create...
<095.872167> CallProgFP_Create >>
<095.872173> APPLY_FILTER = 0
<095.872179> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.872185> ============> 6
<095.872190> Cadence: Busy Tone loose detection is 0

<095.872201> TYPE BUSY
<095.872207> Filter index 6
<095.872212> Filter SubIndex 0
<095.872217> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<095.872222> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<095.872228> OFF_TIME_THAT_RESETS_CYCLE 90
<095.872233> BUFFER LENGTH 160 samples.
<095.872238> INTEGRATION_LENGTH 0[ms]
<095.872243> LEVEL 96
<095.872250> INTEGRATION_TIME = 0 Buffers.
<095.872256> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<095.872262> TYPE DIAL
<095.872267> Filter index 5
<095.872271> Filter SubIndex 0
<095.872276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<095.872282> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<095.872287> OFF_TIME_THAT_RESETS_CYCLE 0
<095.872292> BUFFER LENGTH 666 samples.
<095.872297> INTEGRATION_LENGTH 2500[ms]
<095.872302> LEVEL 96
<095.872308> INTEGRATION_TIME = 28 Buffers.
<095.872314> CALLPROG Create <<
<095.872319> CALLPROG Dialing T7072000
<095.872325> Configuration->tone_DigitLength 100
<095.872330> Configuration->pulse_OffHookTime 36
<095.872335> Configuration->pulse_OnHookTime 64
<095.872340> Configuration->dialPauseTime 2
<095.872345> Configuration->flashTime 50
<095.872350> Configuration->toneOrPulseFlag 0
<095.872355> Configuration->dialModifierValidationFlag 0
<095.872361> Configuration->ABCD_PermittedFlag 0
<095.872366> Configuration->pulseAndToneInSameStringPermittedFlag 0
<095.872372> Configuration->callingToneFlag 0
<095.872377> Configuration->commaPauseDurLimit 255
<095.872382> Configuration->digitPattern 1
<095.872387> Configuration->tone_BetweenDigitsInterval 100
<095.872392> Configuration->pulse_BetweenDigitsInterval 800
<095.872397> DTMF_Gain1 = 13014
<095.872402> DTMF_Gain2 = 16384
<095.872407> AnalyzeDialString: Updated 17 May 1999 00:50
<095.872413> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<095.872418> Dial String Syntax is VALID
<095.872423> GetNoAnswerTimeOut. 60
<095.872428> WAIT DIAL TIMEOUT = 5
<095.872433> CALLPROG_Dial was exited.
<095.872438> call: create RC: 9600 <-> 8000...
<095.872445> slamr0: modem_start..
<095.872450> slamr0: modem set state: 1 --> 2...
<095.872456> slamr0: new state: DP_ESTAB
<095.872461> main: modemap_ioctl: cmd 8, arg 3...
<095.872468> slamr0: modem set hook: 0 --> 1...
<095.872474> main: modemap_ioctl: cmd 2, arg 1...
<095.872482> err: slamr0: modem start = -1: cannot start device.
<095.872488> slamr0: modem_stop..
<095.872493> slamr0: modem set hook: 0 --> 0...
<095.872499> main: modemap_ioctl: cmd 8, arg 0...
<095.872505> call: delete...
<095.872510> Dialer was aborted.
<095.872515> CALLPROG_Delete is entered
<095.872520> cadence_delete with CADENCE_DIAL_OBJ is invoked
<095.872525> cadence_delete with CADENCE_OBJ is invoked
<095.872531> CALLPROG_Delete is exited
<095.872537> slamr0: modem set state: 2 --> 1...
<095.872542> slamr0: new state: MODEM_IDLE
<095.872547> slamr0: modem report result: 3 (NO CARRIER)
<095.872558> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<096.176138> slamr0: run cmd: ATDT7072000
<096.176151> slamr0: modem dial: T7072000...
<096.176157> slamr0: modem_dial_start...
<096.176162> call: create...
<096.176169> CallProgFP_Create >>
<096.176174> APPLY_FILTER = 0
<096.176180> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.176186> ============> 6
<096.176191> Cadence: Busy Tone loose detection is 0

<096.176203> TYPE BUSY
<096.176208> Filter index 6
<096.176213> Filter SubIndex 0
<096.176218> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<096.176224> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<096.176230> OFF_TIME_THAT_RESETS_CYCLE 90
<096.176235> BUFFER LENGTH 160 samples.
<096.176240> INTEGRATION_LENGTH 0[ms]
<096.176245> LEVEL 96
<096.176251> INTEGRATION_TIME = 0 Buffers.
<096.176258> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.176264> TYPE DIAL
<096.176268> Filter index 5
<096.176273> Filter SubIndex 0
<096.176278> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<096.176283> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<096.176289> OFF_TIME_THAT_RESETS_CYCLE 0
<096.176294> BUFFER LENGTH 666 samples.
<096.176299> INTEGRATION_LENGTH 2500[ms]
<096.176304> LEVEL 96
<096.176310> INTEGRATION_TIME = 28 Buffers.
<096.176316> CALLPROG Create <<
<096.176321> CALLPROG Dialing T7072000
<096.176327> Configuration->tone_DigitLength 100
<096.176332> Configuration->pulse_OffHookTime 36
<096.176337> Configuration->pulse_OnHookTime 64
<096.176342> Configuration->dialPauseTime 2
<096.176347> Configuration->flashTime 50
<096.176352> Configuration->toneOrPulseFlag 0
<096.176357> Configuration->dialModifierValidationFlag 0
<096.176363> Configuration->ABCD_PermittedFlag 0
<096.176368> Configuration->pulseAndToneInSameStringPermittedFlag 0
<096.176373> Configuration->callingToneFlag 0
<096.176378> Configuration->commaPauseDurLimit 255
<096.176383> Configuration->digitPattern 1
<096.176388> Configuration->tone_BetweenDigitsInterval 100
<096.176394> Configuration->pulse_BetweenDigitsInterval 800
<096.176399> DTMF_Gain1 = 13014
<096.176404> DTMF_Gain2 = 16384
<096.176409> AnalyzeDialString: Updated 17 May 1999 00:50
<096.176414> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<096.176420> Dial String Syntax is VALID
<096.176425> GetNoAnswerTimeOut. 60
<096.176430> WAIT DIAL TIMEOUT = 5
<096.176435> CALLPROG_Dial was exited.
<096.176440> call: create RC: 9600 <-> 8000...
<096.176447> slamr0: modem_start..
<096.176452> slamr0: modem set state: 1 --> 2...
<096.176458> slamr0: new state: DP_ESTAB
<096.176463> main: modemap_ioctl: cmd 8, arg 3...
<096.176470> slamr0: modem set hook: 0 --> 1...
<096.176476> main: modemap_ioctl: cmd 2, arg 1...
<096.176484> err: slamr0: modem start = -1: cannot start device.
<096.176490> slamr0: modem_stop..
<096.176495> slamr0: modem set hook: 0 --> 0...
<096.176500> main: modemap_ioctl: cmd 8, arg 0...
<096.176507> call: delete...
<096.176512> Dialer was aborted.
<096.176517> CALLPROG_Delete is entered
<096.176521> cadence_delete with CADENCE_DIAL_OBJ is invoked
<096.176527> cadence_delete with CADENCE_OBJ is invoked
<096.176532> CALLPROG_Delete is exited
<096.176538> slamr0: modem set state: 2 --> 1...
<096.176544> slamr0: new state: MODEM_IDLE
<096.176549> slamr0: modem report result: 3 (NO CARRIER)
<096.176559> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<096.480137> slamr0: run cmd: ATDT7072000
<096.480150> slamr0: modem dial: T7072000...
<096.480156> slamr0: modem_dial_start...
<096.480161> call: create...
<096.480168> CallProgFP_Create >>
<096.480173> APPLY_FILTER = 0
<096.480179> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.480185> ============> 6
<096.480190> Cadence: Busy Tone loose detection is 0

<096.480201> TYPE BUSY
<096.480207> Filter index 6
<096.480212> Filter SubIndex 0
<096.480217> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<096.480222> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<096.480228> OFF_TIME_THAT_RESETS_CYCLE 90
<096.480233> BUFFER LENGTH 160 samples.
<096.480238> INTEGRATION_LENGTH 0[ms]
<096.480243> LEVEL 96
<096.480250> INTEGRATION_TIME = 0 Buffers.
<096.480256> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.480262> TYPE DIAL
<096.480267> Filter index 5
<096.480272> Filter SubIndex 0
<096.480276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<096.480282> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<096.480287> OFF_TIME_THAT_RESETS_CYCLE 0
<096.480292> BUFFER LENGTH 666 samples.
<096.480297> INTEGRATION_LENGTH 2500[ms]
<096.480302> LEVEL 96
<096.480308> INTEGRATION_TIME = 28 Buffers.
<096.480314> CALLPROG Create <<
<096.480319> CALLPROG Dialing T7072000
<096.480325> Configuration->tone_DigitLength 100
<096.480330> Configuration->pulse_OffHookTime 36
<096.480335> Configuration->pulse_OnHookTime 64
<096.480340> Configuration->dialPauseTime 2
<096.480345> Configuration->flashTime 50
<096.480350> Configuration->toneOrPulseFlag 0
<096.480356> Configuration->dialModifierValidationFlag 0
<096.480361> Configuration->ABCD_PermittedFlag 0
<096.480366> Configuration->pulseAndToneInSameStringPermittedFlag 0
<096.480371> Configuration->callingToneFlag 0
<096.480376> Configuration->commaPauseDurLimit 255
<096.480382> Configuration->digitPattern 1
<096.480387> Configuration->tone_BetweenDigitsInterval 100
<096.480392> Configuration->pulse_BetweenDigitsInterval 800
<096.480397> DTMF_Gain1 = 13014
<096.480402> DTMF_Gain2 = 16384
<096.480407> AnalyzeDialString: Updated 17 May 1999 00:50
<096.480413> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<096.480418> Dial String Syntax is VALID
<096.480423> GetNoAnswerTimeOut. 60
<096.480428> WAIT DIAL TIMEOUT = 5
<096.480433> CALLPROG_Dial was exited.
<096.480438> call: create RC: 9600 <-> 8000...
<096.480445> slamr0: modem_start..
<096.480450> slamr0: modem set state: 1 --> 2...
<096.480456> slamr0: new state: DP_ESTAB
<096.480461> main: modemap_ioctl: cmd 8, arg 3...
<096.480468> slamr0: modem set hook: 0 --> 1...
<096.480474> main: modemap_ioctl: cmd 2, arg 1...
<096.480482> err: slamr0: modem start = -1: cannot start device.
<096.480488> slamr0: modem_stop..
<096.480493> slamr0: modem set hook: 0 --> 0...
<096.480498> main: modemap_ioctl: cmd 8, arg 0...
<096.480504> call: delete...
<096.480509> Dialer was aborted.
<096.480514> CALLPROG_Delete is entered
<096.480519> cadence_delete with CADENCE_DIAL_OBJ is invoked
<096.480525> cadence_delete with CADENCE_OBJ is invoked
<096.480530> CALLPROG_Delete is exited
<096.480536> slamr0: modem set state: 2 --> 1...
<096.480542> slamr0: new state: MODEM_IDLE
<096.480547> slamr0: modem report result: 3 (NO CARRIER)
<096.480557> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<096.784142> slamr0: run cmd: ATDT7072000
<096.784154> slamr0: modem dial: T7072000...
<096.784160> slamr0: modem_dial_start...
<096.784165> call: create...
<096.784172> CallProgFP_Create >>
<096.784177> APPLY_FILTER = 0
<096.784183> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.784189> ============> 6
<096.784194> Cadence: Busy Tone loose detection is 0

<096.784208> TYPE BUSY
<096.784214> Filter index 6
<096.784218> Filter SubIndex 0
<096.784223> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<096.784229> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<096.784234> OFF_TIME_THAT_RESETS_CYCLE 90
<096.784240> BUFFER LENGTH 160 samples.
<096.784245> INTEGRATION_LENGTH 0[ms]
<096.784250> LEVEL 96
<096.784256> INTEGRATION_TIME = 0 Buffers.
<096.784262> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<096.784268> TYPE DIAL
<096.784273> Filter index 5
<096.784278> Filter SubIndex 0
<096.784282> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<096.784288> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<096.784293> OFF_TIME_THAT_RESETS_CYCLE 0
<096.784298> BUFFER LENGTH 666 samples.
<096.784303> INTEGRATION_LENGTH 2500[ms]
<096.784308> LEVEL 96
<096.784314> INTEGRATION_TIME = 28 Buffers.
<096.784320> CALLPROG Create <<
<096.784325> CALLPROG Dialing T7072000
<096.784331> Configuration->tone_DigitLength 100
<096.784336> Configuration->pulse_OffHookTime 36
<096.784341> Configuration->pulse_OnHookTime 64
<096.784346> Configuration->dialPauseTime 2
<096.784351> Configuration->flashTime 50
<096.784356> Configuration->toneOrPulseFlag 0
<096.784361> Configuration->dialModifierValidationFlag 0
<096.784366> Configuration->ABCD_PermittedFlag 0
<096.784371> Configuration->pulseAndToneInSameStringPermittedFlag 0
<096.784377> Configuration->callingToneFlag 0
<096.784382> Configuration->commaPauseDurLimit 255
<096.784387> Configuration->digitPattern 1
<096.784392> Configuration->tone_BetweenDigitsInterval 100
<096.784397> Configuration->pulse_BetweenDigitsInterval 800
<096.784403> DTMF_Gain1 = 13014
<096.784408> DTMF_Gain2 = 16384
<096.784413> AnalyzeDialString: Updated 17 May 1999 00:50
<096.784418> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<096.784423> Dial String Syntax is VALID
<096.784429> GetNoAnswerTimeOut. 60
<096.784434> WAIT DIAL TIMEOUT = 5
<096.784439> CALLPROG_Dial was exited.
<096.784444> call: create RC: 9600 <-> 8000...
<096.784450> slamr0: modem_start..
<096.784455> slamr0: modem set state: 1 --> 2...
<096.784461> slamr0: new state: DP_ESTAB
<096.784466> main: modemap_ioctl: cmd 8, arg 3...
<096.784473> slamr0: modem set hook: 0 --> 1...
<096.784479> main: modemap_ioctl: cmd 2, arg 1...
<096.784487> err: slamr0: modem start = -1: cannot start device.
<096.784493> slamr0: modem_stop..
<096.784498> slamr0: modem set hook: 0 --> 0...
<096.784503> main: modemap_ioctl: cmd 8, arg 0...
<096.784509> call: delete...
<096.784514> Dialer was aborted.
<096.784519> CALLPROG_Delete is entered
<096.784524> cadence_delete with CADENCE_DIAL_OBJ is invoked
<096.784530> cadence_delete with CADENCE_OBJ is invoked
<096.784535> CALLPROG_Delete is exited
<096.784541> slamr0: modem set state: 2 --> 1...
<096.784546> slamr0: new state: MODEM_IDLE
<096.784551> slamr0: modem report result: 3 (NO CARRIER)
<096.784562> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<097.088137> slamr0: run cmd: ATDT7072000
<097.088150> slamr0: modem dial: T7072000...
<097.088156> slamr0: modem_dial_start...
<097.088162> call: create...
<097.088169> CallProgFP_Create >>
<097.088174> APPLY_FILTER = 0
<097.088180> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.088186> ============> 6
<097.088192> Cadence: Busy Tone loose detection is 0

<097.088204> TYPE BUSY
<097.088209> Filter index 6
<097.088214> Filter SubIndex 0
<097.088219> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<097.088225> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<097.088230> OFF_TIME_THAT_RESETS_CYCLE 90
<097.088236> BUFFER LENGTH 160 samples.
<097.088241> INTEGRATION_LENGTH 0[ms]
<097.088246> LEVEL 96
<097.088253> INTEGRATION_TIME = 0 Buffers.
<097.088259> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.088265> TYPE DIAL
<097.088270> Filter index 5
<097.088275> Filter SubIndex 0
<097.088279> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<097.088285> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<097.088290> OFF_TIME_THAT_RESETS_CYCLE 0
<097.088295> BUFFER LENGTH 666 samples.
<097.088301> INTEGRATION_LENGTH 2500[ms]
<097.088306> LEVEL 96
<097.088311> INTEGRATION_TIME = 28 Buffers.
<097.088318> CALLPROG Create <<
<097.088323> CALLPROG Dialing T7072000
<097.088328> Configuration->tone_DigitLength 100
<097.088334> Configuration->pulse_OffHookTime 36
<097.088339> Configuration->pulse_OnHookTime 64
<097.088344> Configuration->dialPauseTime 2
<097.088349> Configuration->flashTime 50
<097.088354> Configuration->toneOrPulseFlag 0
<097.088359> Configuration->dialModifierValidationFlag 0
<097.088364> Configuration->ABCD_PermittedFlag 0
<097.088369> Configuration->pulseAndToneInSameStringPermittedFlag 0
<097.088375> Configuration->callingToneFlag 0
<097.088380> Configuration->commaPauseDurLimit 255
<097.088385> Configuration->digitPattern 1
<097.088390> Configuration->tone_BetweenDigitsInterval 100
<097.088395> Configuration->pulse_BetweenDigitsInterval 800
<097.088401> DTMF_Gain1 = 13014
<097.088406> DTMF_Gain2 = 16384
<097.088411> AnalyzeDialString: Updated 17 May 1999 00:50
<097.088417> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<097.088422> Dial String Syntax is VALID
<097.088427> GetNoAnswerTimeOut. 60
<097.088433> WAIT DIAL TIMEOUT = 5
<097.088438> CALLPROG_Dial was exited.
<097.088443> call: create RC: 9600 <-> 8000...
<097.088449> slamr0: modem_start..
<097.088455> slamr0: modem set state: 1 --> 2...
<097.088460> slamr0: new state: DP_ESTAB
<097.088466> main: modemap_ioctl: cmd 8, arg 3...
<097.088474> slamr0: modem set hook: 0 --> 1...
<097.088479> main: modemap_ioctl: cmd 2, arg 1...
<097.088488> err: slamr0: modem start = -1: cannot start device.
<097.088494> slamr0: modem_stop..
<097.088499> slamr0: modem set hook: 0 --> 0...
<097.088504> main: modemap_ioctl: cmd 8, arg 0...
<097.088511> call: delete...
<097.088516> Dialer was aborted.
<097.088521> CALLPROG_Delete is entered
<097.088526> cadence_delete with CADENCE_DIAL_OBJ is invoked
<097.088531> cadence_delete with CADENCE_OBJ is invoked
<097.088537> CALLPROG_Delete is exited
<097.088543> slamr0: modem set state: 2 --> 1...
<097.088548> slamr0: new state: MODEM_IDLE
<097.088554> slamr0: modem report result: 3 (NO CARRIER)
<097.088564> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<097.392137> slamr0: run cmd: ATDT7072000
<097.392149> slamr0: modem dial: T7072000...
<097.392155> slamr0: modem_dial_start...
<097.392161> call: create...
<097.392167> CallProgFP_Create >>
<097.392173> APPLY_FILTER = 0
<097.392179> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.392185> ============> 6
<097.392190> Cadence: Busy Tone loose detection is 0

<097.392201> TYPE BUSY
<097.392207> Filter index 6
<097.392212> Filter SubIndex 0
<097.392217> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<097.392223> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<097.392228> OFF_TIME_THAT_RESETS_CYCLE 90
<097.392233> BUFFER LENGTH 160 samples.
<097.392238> INTEGRATION_LENGTH 0[ms]
<097.392244> LEVEL 96
<097.392250> INTEGRATION_TIME = 0 Buffers.
<097.392256> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.392262> TYPE DIAL
<097.392267> Filter index 5
<097.392272> Filter SubIndex 0
<097.392277> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<097.392282> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<097.392288> OFF_TIME_THAT_RESETS_CYCLE 0
<097.392293> BUFFER LENGTH 666 samples.
<097.392298> INTEGRATION_LENGTH 2500[ms]
<097.392303> LEVEL 96
<097.392308> INTEGRATION_TIME = 28 Buffers.
<097.392315> CALLPROG Create <<
<097.392320> CALLPROG Dialing T7072000
<097.392326> Configuration->tone_DigitLength 100
<097.392331> Configuration->pulse_OffHookTime 36
<097.392336> Configuration->pulse_OnHookTime 64
<097.392341> Configuration->dialPauseTime 2
<097.392346> Configuration->flashTime 50
<097.392351> Configuration->toneOrPulseFlag 0
<097.392356> Configuration->dialModifierValidationFlag 0
<097.392361> Configuration->ABCD_PermittedFlag 0
<097.392366> Configuration->pulseAndToneInSameStringPermittedFlag 0
<097.392372> Configuration->callingToneFlag 0
<097.392377> Configuration->commaPauseDurLimit 255
<097.392382> Configuration->digitPattern 1
<097.392387> Configuration->tone_BetweenDigitsInterval 100
<097.392393> Configuration->pulse_BetweenDigitsInterval 800
<097.392398> DTMF_Gain1 = 13014
<097.392403> DTMF_Gain2 = 16384
<097.392408> AnalyzeDialString: Updated 17 May 1999 00:50
<097.392414> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<097.392419> Dial String Syntax is VALID
<097.392424> GetNoAnswerTimeOut. 60
<097.392430> WAIT DIAL TIMEOUT = 5
<097.392435> CALLPROG_Dial was exited.
<097.392439> call: create RC: 9600 <-> 8000...
<097.392446> slamr0: modem_start..
<097.392451> slamr0: modem set state: 1 --> 2...
<097.392457> slamr0: new state: DP_ESTAB
<097.392462> main: modemap_ioctl: cmd 8, arg 3...
<097.392469> slamr0: modem set hook: 0 --> 1...
<097.392475> main: modemap_ioctl: cmd 2, arg 1...
<097.392483> err: slamr0: modem start = -1: cannot start device.
<097.392489> slamr0: modem_stop..
<097.392494> slamr0: modem set hook: 0 --> 0...
<097.392499> main: modemap_ioctl: cmd 8, arg 0...
<097.392506> call: delete...
<097.392511> Dialer was aborted.
<097.392516> CALLPROG_Delete is entered
<097.392521> cadence_delete with CADENCE_DIAL_OBJ is invoked
<097.392526> cadence_delete with CADENCE_OBJ is invoked
<097.392532> CALLPROG_Delete is exited
<097.392537> slamr0: modem set state: 2 --> 1...
<097.392543> slamr0: new state: MODEM_IDLE
<097.392548> slamr0: modem report result: 3 (NO CARRIER)
<097.392558> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<097.696137> slamr0: run cmd: ATDT7072000
<097.696149> slamr0: modem dial: T7072000...
<097.696155> slamr0: modem_dial_start...
<097.696161> call: create...
<097.696167> CallProgFP_Create >>
<097.696172> APPLY_FILTER = 0
<097.696178> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.696184> ============> 6
<097.696189> Cadence: Busy Tone loose detection is 0

<097.696195> TYPE BUSY
<097.696206> Filter index 6
<097.696211> Filter SubIndex 0
<097.696216> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<097.696222> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<097.696227> OFF_TIME_THAT_RESETS_CYCLE 90
<097.696232> BUFFER LENGTH 160 samples.
<097.696238> INTEGRATION_LENGTH 0[ms]
<097.696243> LEVEL 96
<097.696249> INTEGRATION_TIME = 0 Buffers.
<097.696255> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<097.696262> TYPE DIAL
<097.696266> Filter index 5
<097.696271> Filter SubIndex 0
<097.696276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<097.696282> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<097.696287> OFF_TIME_THAT_RESETS_CYCLE 0
<097.696292> BUFFER LENGTH 666 samples.
<097.696297> INTEGRATION_LENGTH 2500[ms]
<097.696302> LEVEL 96
<097.696308> INTEGRATION_TIME = 28 Buffers.
<097.696314> CALLPROG Create <<
<097.696319> CALLPROG Dialing T7072000
<097.696325> Configuration->tone_DigitLength 100
<097.696330> Configuration->pulse_OffHookTime 36
<097.696335> Configuration->pulse_OnHookTime 64
<097.696341> Configuration->dialPauseTime 2
<097.696346> Configuration->flashTime 50
<097.696351> Configuration->toneOrPulseFlag 0
<097.696356> Configuration->dialModifierValidationFlag 0
<097.696361> Configuration->ABCD_PermittedFlag 0
<097.696366> Configuration->pulseAndToneInSameStringPermittedFlag 0
<097.696372> Configuration->callingToneFlag 0
<097.696377> Configuration->commaPauseDurLimit 255
<097.696382> Configuration->digitPattern 1
<097.696387> Configuration->tone_BetweenDigitsInterval 100
<097.696392> Configuration->pulse_BetweenDigitsInterval 800
<097.696398> DTMF_Gain1 = 13014
<097.696403> DTMF_Gain2 = 16384
<097.696408> AnalyzeDialString: Updated 17 May 1999 00:50
<097.696413> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<097.696418> Dial String Syntax is VALID
<097.696424> GetNoAnswerTimeOut. 60
<097.696429> WAIT DIAL TIMEOUT = 5
<097.696434> CALLPROG_Dial was exited.
<097.696439> call: create RC: 9600 <-> 8000...
<097.696445> slamr0: modem_start..
<097.696451> slamr0: modem set state: 1 --> 2...
<097.696456> slamr0: new state: DP_ESTAB
<097.696462> main: modemap_ioctl: cmd 8, arg 3...
<097.696469> slamr0: modem set hook: 0 --> 1...
<097.696475> main: modemap_ioctl: cmd 2, arg 1...
<097.696482> err: slamr0: modem start = -1: cannot start device.
<097.696488> slamr0: modem_stop..
<097.696493> slamr0: modem set hook: 0 --> 0...
<097.696499> main: modemap_ioctl: cmd 8, arg 0...
<097.696505> call: delete...
<097.696510> Dialer was aborted.
<097.696515> CALLPROG_Delete is entered
<097.696520> cadence_delete with CADENCE_DIAL_OBJ is invoked
<097.696525> cadence_delete with CADENCE_OBJ is invoked
<097.696530> CALLPROG_Delete is exited
<097.696536> slamr0: modem set state: 2 --> 1...
<097.696542> slamr0: new state: MODEM_IDLE
<097.696547> slamr0: modem report result: 3 (NO CARRIER)
<097.696557> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<098.000139> slamr0: run cmd: ATDT7072000
<098.000154> slamr0: modem dial: T7072000...
<098.000160> slamr0: modem_dial_start...
<098.000166> call: create...
<098.000173> CallProgFP_Create >>
<098.000179> APPLY_FILTER = 0
<098.000185> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.000192> ============> 6
<098.000202> Cadence: Busy Tone loose detection is 0

<098.000210> TYPE BUSY
<098.000215> Filter index 6
<098.000220> Filter SubIndex 0
<098.000225> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<098.000231> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<098.000236> OFF_TIME_THAT_RESETS_CYCLE 90
<098.000242> BUFFER LENGTH 160 samples.
<098.000247> INTEGRATION_LENGTH 0[ms]
<098.000252> LEVEL 96
<098.000259> INTEGRATION_TIME = 0 Buffers.
<098.000265> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.000271> TYPE DIAL
<098.000276> Filter index 5
<098.000281> Filter SubIndex 0
<098.000286> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<098.000292> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<098.000297> OFF_TIME_THAT_RESETS_CYCLE 0
<098.000302> BUFFER LENGTH 666 samples.
<098.000308> INTEGRATION_LENGTH 2500[ms]
<098.000313> LEVEL 96
<098.000318> INTEGRATION_TIME = 28 Buffers.
<098.000325> CALLPROG Create <<
<098.000330> CALLPROG Dialing T7072000
<098.000336> Configuration->tone_DigitLength 100
<098.000342> Configuration->pulse_OffHookTime 36
<098.000347> Configuration->pulse_OnHookTime 64
<098.000352> Configuration->dialPauseTime 2
<098.000357> Configuration->flashTime 50
<098.000362> Configuration->toneOrPulseFlag 0
<098.000368> Configuration->dialModifierValidationFlag 0
<098.000373> Configuration->ABCD_PermittedFlag 0
<098.000378> Configuration->pulseAndToneInSameStringPermittedFlag 0
<098.000384> Configuration->callingToneFlag 0
<098.000389> Configuration->commaPauseDurLimit 255
<098.000395> Configuration->digitPattern 1
<098.000400> Configuration->tone_BetweenDigitsInterval 100
<098.000405> Configuration->pulse_BetweenDigitsInterval 800
<098.000411> DTMF_Gain1 = 13014
<098.000416> DTMF_Gain2 = 16384
<098.000422> AnalyzeDialString: Updated 17 May 1999 00:50
<098.000427> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<098.000432> Dial String Syntax is VALID
<098.000438> GetNoAnswerTimeOut. 60
<098.000443> WAIT DIAL TIMEOUT = 5
<098.000448> CALLPROG_Dial was exited.
<098.000453> call: create RC: 9600 <-> 8000...
<098.000460> slamr0: modem_start..
<098.000466> slamr0: modem set state: 1 --> 2...
<098.000472> slamr0: new state: DP_ESTAB
<098.000477> main: modemap_ioctl: cmd 8, arg 3...
<098.000486> slamr0: modem set hook: 0 --> 1...
<098.000492> main: modemap_ioctl: cmd 2, arg 1...
<098.000500> err: slamr0: modem start = -1: cannot start device.
<098.000507> slamr0: modem_stop..
<098.000512> slamr0: modem set hook: 0 --> 0...
<098.000517> main: modemap_ioctl: cmd 8, arg 0...
<098.000524> call: delete...
<098.000530> Dialer was aborted.
<098.000535> CALLPROG_Delete is entered
<098.000540> cadence_delete with CADENCE_DIAL_OBJ is invoked
<098.000546> cadence_delete with CADENCE_OBJ is invoked
<098.000551> CALLPROG_Delete is exited
<098.000557> slamr0: modem set state: 2 --> 1...
<098.000563> slamr0: new state: MODEM_IDLE
<098.000568> slamr0: modem report result: 3 (NO CARRIER)
<098.000579> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<098.304143> slamr0: run cmd: ATDT7072000
<098.304157> slamr0: modem dial: T7072000...
<098.304163> slamr0: modem_dial_start...
<098.304168> call: create...
<098.304175> CallProgFP_Create >>
<098.304180> APPLY_FILTER = 0
<098.304186> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.304192> ============> 6
<098.304204> Cadence: Busy Tone loose detection is 0

<098.304211> TYPE BUSY
<098.304216> Filter index 6
<098.304221> Filter SubIndex 0
<098.304226> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<098.304231> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<098.304237> OFF_TIME_THAT_RESETS_CYCLE 90
<098.304242> BUFFER LENGTH 160 samples.
<098.304247> INTEGRATION_LENGTH 0[ms]
<098.304252> LEVEL 96
<098.304258> INTEGRATION_TIME = 0 Buffers.
<098.304265> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.304271> TYPE DIAL
<098.304275> Filter index 5
<098.304280> Filter SubIndex 0
<098.304285> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<098.304290> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<098.304296> OFF_TIME_THAT_RESETS_CYCLE 0
<098.304301> BUFFER LENGTH 666 samples.
<098.304306> INTEGRATION_LENGTH 2500[ms]
<098.304311> LEVEL 96
<098.304316> INTEGRATION_TIME = 28 Buffers.
<098.304323> CALLPROG Create <<
<098.304328> CALLPROG Dialing T7072000
<098.304334> Configuration->tone_DigitLength 100
<098.304339> Configuration->pulse_OffHookTime 36
<098.304345> Configuration->pulse_OnHookTime 64
<098.304350> Configuration->dialPauseTime 2
<098.304355> Configuration->flashTime 50
<098.304360> Configuration->toneOrPulseFlag 0
<098.304365> Configuration->dialModifierValidationFlag 0
<098.304370> Configuration->ABCD_PermittedFlag 0
<098.304375> Configuration->pulseAndToneInSameStringPermittedFlag 0
<098.304381> Configuration->callingToneFlag 0
<098.304386> Configuration->commaPauseDurLimit 255
<098.304391> Configuration->digitPattern 1
<098.304396> Configuration->tone_BetweenDigitsInterval 100
<098.304401> Configuration->pulse_BetweenDigitsInterval 800
<098.304407> DTMF_Gain1 = 13014
<098.304412> DTMF_Gain2 = 16384
<098.304417> AnalyzeDialString: Updated 17 May 1999 00:50
<098.304422> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<098.304427> Dial String Syntax is VALID
<098.304433> GetNoAnswerTimeOut. 60
<098.304438> WAIT DIAL TIMEOUT = 5
<098.304443> CALLPROG_Dial was exited.
<098.304448> call: create RC: 9600 <-> 8000...
<098.304455> slamr0: modem_start..
<098.304460> slamr0: modem set state: 1 --> 2...
<098.304466> slamr0: new state: DP_ESTAB
<098.304471> main: modemap_ioctl: cmd 8, arg 3...
<098.304479> slamr0: modem set hook: 0 --> 1...
<098.304485> main: modemap_ioctl: cmd 2, arg 1...
<098.304493> err: slamr0: modem start = -1: cannot start device.
<098.304499> slamr0: modem_stop..
<098.304504> slamr0: modem set hook: 0 --> 0...
<098.304510> main: modemap_ioctl: cmd 8, arg 0...
<098.304516> call: delete...
<098.304521> Dialer was aborted.
<098.304526> CALLPROG_Delete is entered
<098.304531> cadence_delete with CADENCE_DIAL_OBJ is invoked
<098.304537> cadence_delete with CADENCE_OBJ is invoked
<098.304542> CALLPROG_Delete is exited
<098.304548> slamr0: modem set state: 2 --> 1...
<098.304554> slamr0: new state: MODEM_IDLE
<098.304559> slamr0: modem report result: 3 (NO CARRIER)
<098.304569> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<098.608138> slamr0: run cmd: ATDT7072000
<098.608152> slamr0: modem dial: T7072000...
<098.608158> slamr0: modem_dial_start...
<098.608164> call: create...
<098.608171> CallProgFP_Create >>
<098.608176> APPLY_FILTER = 0
<098.608182> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.608188> ============> 6
<098.608193> Cadence: Busy Tone loose detection is 0

<098.608205> TYPE BUSY
<098.608210> Filter index 6
<098.608215> Filter SubIndex 0
<098.608220> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<098.608225> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<098.608231> OFF_TIME_THAT_RESETS_CYCLE 90
<098.608236> BUFFER LENGTH 160 samples.
<098.608241> INTEGRATION_LENGTH 0[ms]
<098.608246> LEVEL 96
<098.608253> INTEGRATION_TIME = 0 Buffers.
<098.608259> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.608265> TYPE DIAL
<098.608270> Filter index 5
<098.608275> Filter SubIndex 0
<098.608279> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<098.608285> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<098.608290> OFF_TIME_THAT_RESETS_CYCLE 0
<098.608295> BUFFER LENGTH 666 samples.
<098.608300> INTEGRATION_LENGTH 2500[ms]
<098.608305> LEVEL 96
<098.608311> INTEGRATION_TIME = 28 Buffers.
<098.608318> CALLPROG Create <<
<098.608323> CALLPROG Dialing T7072000
<098.608328> Configuration->tone_DigitLength 100
<098.608334> Configuration->pulse_OffHookTime 36
<098.608339> Configuration->pulse_OnHookTime 64
<098.608344> Configuration->dialPauseTime 2
<098.608349> Configuration->flashTime 50
<098.608354> Configuration->toneOrPulseFlag 0
<098.608359> Configuration->dialModifierValidationFlag 0
<098.608365> Configuration->ABCD_PermittedFlag 0
<098.608370> Configuration->pulseAndToneInSameStringPermittedFlag 0
<098.608375> Configuration->callingToneFlag 0
<098.608381> Configuration->commaPauseDurLimit 255
<098.608386> Configuration->digitPattern 1
<098.608391> Configuration->tone_BetweenDigitsInterval 100
<098.608396> Configuration->pulse_BetweenDigitsInterval 800
<098.608401> DTMF_Gain1 = 13014
<098.608406> DTMF_Gain2 = 16384
<098.608412> AnalyzeDialString: Updated 17 May 1999 00:50
<098.608417> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<098.608422> Dial String Syntax is VALID
<098.608427> GetNoAnswerTimeOut. 60
<098.608433> WAIT DIAL TIMEOUT = 5
<098.608437> CALLPROG_Dial was exited.
<098.608442> call: create RC: 9600 <-> 8000...
<098.608449> slamr0: modem_start..
<098.608454> slamr0: modem set state: 1 --> 2...
<098.608460> slamr0: new state: DP_ESTAB
<098.608465> main: modemap_ioctl: cmd 8, arg 3...
<098.608473> slamr0: modem set hook: 0 --> 1...
<098.608479> main: modemap_ioctl: cmd 2, arg 1...
<098.608487> err: slamr0: modem start = -1: cannot start device.
<098.608493> slamr0: modem_stop..
<098.608498> slamr0: modem set hook: 0 --> 0...
<098.608503> main: modemap_ioctl: cmd 8, arg 0...
<098.608510> call: delete...
<098.608515> Dialer was aborted.
<098.608520> CALLPROG_Delete is entered
<098.608525> cadence_delete with CADENCE_DIAL_OBJ is invoked
<098.608531> cadence_delete with CADENCE_OBJ is invoked
<098.608536> CALLPROG_Delete is exited
<098.608542> slamr0: modem set state: 2 --> 1...
<098.608548> slamr0: new state: MODEM_IDLE
<098.608553> slamr0: modem report result: 3 (NO CARRIER)
<098.608563> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Sending: ATDT7072000
--> Waiting for carrier.
<098.912137> slamr0: run cmd: ATDT7072000
<098.912150> slamr0: modem dial: T7072000...
<098.912156> slamr0: modem_dial_start...
<098.912162> call: create...
<098.912168> CallProgFP_Create >>
<098.912174> APPLY_FILTER = 0
<098.912179> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.912185> ============> 6
<098.912191> Cadence: Busy Tone loose detection is 0

<098.912202> TYPE BUSY
<098.912207> Filter index 6
<098.912212> Filter SubIndex 0
<098.912217> MAX_ON_TIME 30 Buffers MIN_ON_TIME 9 Buffers
<098.912223> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 9 Buffers
<098.912228> OFF_TIME_THAT_RESETS_CYCLE 90
<098.912233> BUFFER LENGTH 160 samples.
<098.912239> INTEGRATION_LENGTH 0[ms]
<098.912244> LEVEL 96
<098.912250> INTEGRATION_TIME = 0 Buffers.
<098.912256> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96

<098.912262> TYPE DIAL
<098.912267> Filter index 5
<098.912272> Filter SubIndex 0
<098.912276> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers
<098.912282> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers
<098.912287> OFF_TIME_THAT_RESETS_CYCLE 0
<098.912292> BUFFER LENGTH 666 samples.
<098.912297> INTEGRATION_LENGTH 2500[ms]
<098.912302> LEVEL 96
<098.912307> INTEGRATION_TIME = 28 Buffers.
<098.912314> CALLPROG Create <<
<098.912319> CALLPROG Dialing T7072000
<098.912325> Configuration->tone_DigitLength 100
<098.912330> Configuration->pulse_OffHookTime 36
<098.912335> Configuration->pulse_OnHookTime 64
<098.912340> Configuration->dialPauseTime 2
<098.912345> Configuration->flashTime 50
<098.912350> Configuration->toneOrPulseFlag 0
<098.912355> Configuration->dialModifierValidationFlag 0
<098.912361> Configuration->ABCD_PermittedFlag 0
<098.912366> Configuration->pulseAndToneInSameStringPermittedFlag 0
<098.912371> Configuration->callingToneFlag 0
<098.912376> Configuration->commaPauseDurLimit 255
<098.912382> Configuration->digitPattern 1
<098.912387> Configuration->tone_BetweenDigitsInterval 100
<098.912392> Configuration->pulse_BetweenDigitsInterval 800
<098.912397> DTMF_Gain1 = 13014
<098.912402> DTMF_Gain2 = 16384
<098.912407> AnalyzeDialString: Updated 17 May 1999 00:50
<098.912413> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 7
<098.912418> Dial String Syntax is VALID
<098.912423> GetNoAnswerTimeOut. 60
<098.912429> WAIT DIAL TIMEOUT = 5
<098.912433> CALLPROG_Dial was exited.
<098.912438> call: create RC: 9600 <-> 8000...
<098.912445> slamr0: modem_start..
<098.912450> slamr0: modem set state: 1 --> 2...
<098.912456> slamr0: new state: DP_ESTAB
<098.912461> main: modemap_ioctl: cmd 8, arg 3...
<098.912469> slamr0: modem set hook: 0 --> 1...
<098.912474> main: modemap_ioctl: cmd 2, arg 1...
<098.912482> err: slamr0: modem start = -1: cannot start device.
<098.912488> slamr0: modem_stop..
<098.912493> slamr0: modem set hook: 0 --> 0...
<098.912499> main: modemap_ioctl: cmd 8, arg 0...
<098.912505> call: delete...
<098.912510> Dialer was aborted.
<098.912515> CALLPROG_Delete is entered
<098.912520> cadence_delete with CADENCE_DIAL_OBJ is invoked
<098.912525> cadence_delete with CADENCE_OBJ is invoked
<098.912531> CALLPROG_Delete is exited
<098.912536> slamr0: modem set state: 2 --> 1...
<098.912542> slamr0: new state: MODEM_IDLE
<098.912547> slamr0: modem report result: 3 (NO CARRIER)
<098.912558> slamr0: modem report result: 4 (ERROR)
ATDT7072000
NO CARRIER
ERROR
--> No Carrier! Trying again.
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Fri Nov 20 22:51:39 2009
<099.039601> main: termios changed.
<099.039617> slamr0: update termios...
<099.039655> main: pty closed.

Regards,

Antonio

On 11/21/09, Antonio Olivares <olivares14031@...> wrote:

> Marv,
>
> I downloaded and installed Fedora 12 on home machine which had Fedora
> 10. Now, the source compiles fine, without warnings all looks well,
> but No Carrier error appears again. I tried to save the error
> messages, but the file was of size 0 :(, see following install attempt
> and no success because of NO CARRIER :(
>
> [olivares@localhost Downloads]$ uname -r
> 2.6.31.5-127.fc12.i686.PAE
> [olivares@localhost Downloads]$ tar -zxvf slmodem-2.9.11-20090222.tar.gz
> slmodem-2.9.11-20090222/
> slmodem-2.9.11-20090222/Makefile
> slmodem-2.9.11-20090222/patches/
> slmodem-2.9.11-20090222/patches/no_slusb.patch
> slmodem-2.9.11-20090222/patches/slmodem-usb-2.6.16.patch
> slmodem-2.9.11-20090222/patches/zello.diff
> slmodem-2.9.11-20090222/patches/alsa-linux-2.6.0.patch
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/03_Makefile_2.6.12.4.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/kernel-ver.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/README.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/class_device.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/02_dial_string_size.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/Readme.txt
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/05_st7554_license.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/fortify_source.diff
> slmodem-2.9.11-20090222/patches/sldiffs-20090222/06_slmodem-class-simple-to-class-meins.diff
> slmodem-2.9.11-20090222/patches/zello.txt
> slmodem-2.9.11-20090222/patches/marv.txt
> slmodem-2.9.11-20090222/patches/marv.diff
> slmodem-2.9.11-20090222/patches/no_slusb.txt
> slmodem-2.9.11-20090222/Documentation/
> slmodem-2.9.11-20090222/Documentation/x86_64.txt
> slmodem-2.9.11-20090222/Documentation/Smartlink.txt
> slmodem-2.9.11-20090222/Documentation/ALSA_support.txt
> slmodem-2.9.11-20090222/Documentation/compile_example.txt
> slmodem-2.9.11-20090222/README
> slmodem-2.9.11-20090222/scripts/
> slmodem-2.9.11-20090222/scripts/slmodem.spec
> slmodem-2.9.11-20090222/scripts/debian/
> slmodem-2.9.11-20090222/scripts/debian/slmodemd
> slmodem-2.9.11-20090222/scripts/slackware/
> slmodem-2.9.11-20090222/scripts/slackware/README
> slmodem-2.9.11-20090222/scripts/slackware/rc.slmodemd
> slmodem-2.9.11-20090222/scripts/suse/
> slmodem-2.9.11-20090222/scripts/suse/slmodemd.conf
> slmodem-2.9.11-20090222/scripts/suse/slmodemd.SUSE
> slmodem-2.9.11-20090222/scripts/mandrake/
> slmodem-2.9.11-20090222/scripts/mandrake/slmodemd
> slmodem-2.9.11-20090222/scripts/slmodemd
> slmodem-2.9.11-20090222/scripts/slmodemd.ubuntu.italy
> slmodem-2.9.11-20090222/COPYING
> slmodem-2.9.11-20090222/drivers/
> slmodem-2.9.11-20090222/drivers/Makefile
> slmodem-2.9.11-20090222/drivers/Makefile.orig
> slmodem-2.9.11-20090222/drivers/amrmo_init.c
> slmodem-2.9.11-20090222/drivers/kernel-ver.c
> slmodem-2.9.11-20090222/drivers/old_st7554.c
> slmodem-2.9.11-20090222/drivers/sysdep_amr.c
> slmodem-2.9.11-20090222/drivers/amrlibs.o
> slmodem-2.9.11-20090222/drivers/Modules.symvers
> slmodem-2.9.11-20090222/drivers/st7554.c
> slmodem-2.9.11-20090222/drivers/Module.symvers
> slmodem-2.9.11-20090222/drivers/Module.markers
> slmodem-2.9.11-20090222/drivers/modules.order
> slmodem-2.9.11-20090222/faxing/
> slmodem-2.9.11-20090222/faxing/wvdial.conf
> slmodem-2.9.11-20090222/faxing/modem.sh
> slmodem-2.9.11-20090222/faxing/smartlink.pdf
> slmodem-2.9.11-20090222/faxing/xtel.diff
> slmodem-2.9.11-20090222/faxing/sm56_initstrings
> slmodem-2.9.11-20090222/faxing/1stRead.txt
> slmodem-2.9.11-20090222/faxing/xtel.lignes
> slmodem-2.9.11-20090222/faxing/modem
> slmodem-2.9.11-20090222/modem/
> slmodem-2.9.11-20090222/modem/modem.c
> slmodem-2.9.11-20090222/modem/Makefile
> slmodem-2.9.11-20090222/modem/modem_debug.c
> slmodem-2.9.11-20090222/modem/modem_comp.c
> slmodem-2.9.11-20090222/modem/dp_sinus.c
> slmodem-2.9.11-20090222/modem/modem_datafile.c
> slmodem-2.9.11-20090222/modem/modem_ec.c
> slmodem-2.9.11-20090222/modem/modem_at.c
> slmodem-2.9.11-20090222/modem/modem_param.h
> slmodem-2.9.11-20090222/modem/modem_timer.c
> slmodem-2.9.11-20090222/modem/modem_test.c
> slmodem-2.9.11-20090222/modem/sysdep_common.c
> slmodem-2.9.11-20090222/modem/modem_pack.c
> slmodem-2.9.11-20090222/modem/modem_homolog.h
> slmodem-2.9.11-20090222/modem/modem_defs.h
> slmodem-2.9.11-20090222/modem/Makefile.20080401
> slmodem-2.9.11-20090222/modem/modem_debug.h
> slmodem-2.9.11-20090222/modem/modem_main.c
> slmodem-2.9.11-20090222/modem/homolog_data.c
> slmodem-2.9.11-20090222/modem/modem_timer.h
> slmodem-2.9.11-20090222/modem/dsplibs.o
> slmodem-2.9.11-20090222/modem/dp_dummy.c
> slmodem-2.9.11-20090222/modem/modem_param.c
> slmodem-2.9.11-20090222/modem/modem_cmdline.c
> slmodem-2.9.11-20090222/modem/modem.h
> slmodem-2.9.11-20090222/modem/modem_dp.h
> slmodem-2.9.11-20090222/Changes
> [olivares@localhost Downloads]$ cd slmodem-2.9.11-20090222
> [olivares@localhost slmodem-2.9.11-20090222]$ make
> KERNEL_DIR=/lib/modules/2.6.31.5-127.fc12.i686.PAE/build/
> make -C modem all
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> rebuild profile...
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
> modem_cmdline.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
> modem_datafile.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c
> modem_timer.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c
> modem_param.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c
> modem_debug.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
> homolog_data.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
> sysdep_common.c
> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
> dsplibs.o sysdep_common.o
> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c
> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
> dp_dummy.o dsplibs.o sysdep_common.o
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> make -C drivers KERNEL_DIR=/lib/modules/2.6.31.5-127.fc12.i686.PAE/build/
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> doing kernel-ver::
> cc -I/lib/modules/2.6.31.5-127.fc12.i686.PAE/build//include -o
> kernel-ver kernel-ver.c
> make all KERNEL_VER=2.6.31.5-127.fc12.i686.PAE
> make[2]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> obj-m=slamr.o
> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
> make modules -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build/
> SUBDIRS=/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers
> make[3]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> CC [M]
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/amrmo_init.o
> CC [M]
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/sysdep_amr.o
> LD [M] /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/slamr.o
> Building modules, stage 2.
> MODPOST 1 modules
> WARNING: could not find
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
> for /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/amrlibs.o
> CC
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/slamr.mod.o
> LD [M] /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/slamr.ko
> make[3]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> finished all:
> make[2]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> [olivares@localhost slmodem-2.9.11-20090222]$ make
> make -C modem all
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> make -C drivers KERNEL_DIR=/lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> doing kernel-ver::
> cc -I/lib/modules/2.6.31.5-127.fc12.i686.PAE/build/include -o
> kernel-ver kernel-ver.c
> make all KERNEL_VER=2.6.31.5-127.fc12.i686.PAE
> make[2]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> obj-m=slamr.o
> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
> make modules -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> SUBDIRS=/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers
> make[3]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> Building modules, stage 2.
> MODPOST 1 modules
> WARNING: could not find
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
> for /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/amrlibs.o
> make[3]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> finished all:
> make[2]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> [olivares@localhost slmodem-2.9.11-20090222]$ su -c 'make install'
> Password:
> make -C modem all
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/modem'
> make -C drivers KERNEL_DIR=/lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> doing kernel-ver::
> cc -I/lib/modules/2.6.31.5-127.fc12.i686.PAE/build/include -o
> kernel-ver kernel-ver.c
> make all KERNEL_VER=2.6.31.5-127.fc12.i686.PAE
> make[2]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> obj-m=slamr.o
> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o
> make modules -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> SUBDIRS=/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers
> make[3]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> Building modules, stage 2.
> MODPOST 1 modules
> WARNING: could not find
> /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/.amrlibs.o.cmd
> for /home/olivares/Downloads/slmodem-2.9.11-20090222/drivers/amrlibs.o
> make[3]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> finished all:
> make[2]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> make install -C drivers
> KERNEL_DIR=/lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> make[1]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> doing kernel-ver::
> cc -I/lib/modules/2.6.31.5-127.fc12.i686.PAE/build/include -o
> kernel-ver kernel-ver.c
> mkdir -p /dev
> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1
> ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c
> 242 3 ; echo -n
> make install KERNEL_VER=2.6.31.5-127.fc12.i686.PAE
> make[2]: Entering directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> install -D -m 644 slamr.ko
> /lib/modules/2.6.31.5-127.fc12.i686.PAE/extra/slamr.ko
> /sbin/depmod -a
> make[2]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> make[1]: Leaving directory
> `/home/olivares/Downloads/slmodem-2.9.11-20090222/drivers'
> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
> rm -f -rf /var/lib/slmodem
> install -d -D -m 755 /var/lib/slmodem
> [olivares@localhost slmodem-2.9.11-20090222]$
> [olivares@localhost slmodem-2.9.11-20090222]$ su -
> Password:
> [root@localhost ~]# modprobe slamr
> [root@localhost ~]# slmodemd -c USA /dev/slamr0
> error: mdm setup: cannot open dev `/dev/slamr0': No such device
> error: cannot setup device `/dev/slamr0'
>
>
> slamr: module license 'Smart Link Ltd.' taints kernel.
> Disabling lock debugging due to kernel taint
> slamr: SmartLink AMRMO modem.
> slamr: device 163c:3052 is grabbed by another driver
>
> [olivares@localhost slmodem-2.9.11-20090222]$ dmesg | grep 'slamr'
> slamr: module license 'Smart Link Ltd.' taints kernel.
> slamr: SmartLink AMRMO modem.
> slamr: device 163c:3052 is grabbed by another driver
>
> [olivares@localhost slmodem-2.9.11-20090222]$ cd ..
> [olivares@localhost Downloads]$ tar -zxvf ungrab-winmodem-20090716.tar.gz
> ungrab-winmodem-20090716/
> ungrab-winmodem-20090716/Makefile
> ungrab-winmodem-20090716/updates.txt
> ungrab-winmodem-20090716/ungrab-winmodem.c
> ungrab-winmodem-20090716/Modules.symvers
> ungrab-winmodem-20090716/Module.symvers
> ungrab-winmodem-20090716/Module.markers
> ungrab-winmodem-20090716/Readme.txt
> ungrab-winmodem-20090716/modules.order
> [olivares@localhost Downloads]$ cd ungrab-winmodem-20090716
> [olivares@localhost ungrab-winmodem-20090716]$ make
> make modules -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> SUBDIRS=/home/olivares/Downloads/ungrab-winmodem-20090716
> make[1]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> CC [M]
> /home/olivares/Downloads/ungrab-winmodem-20090716/ungrab-winmodem.o
> Building modules, stage 2.
> MODPOST 1 modules
> CC
> /home/olivares/Downloads/ungrab-winmodem-20090716/ungrab-winmodem.mod.o
> LD [M]
> /home/olivares/Downloads/ungrab-winmodem-20090716/ungrab-winmodem.ko
> make[1]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> [olivares@localhost ungrab-winmodem-20090716]$ su -c 'make install'
> Password:
> make modules -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build
> SUBDIRS=/home/olivares/Downloads/ungrab-winmodem-20090716
> make[1]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> Building modules, stage 2.
> MODPOST 1 modules
> make[1]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
> install -D -m 644 ungrab-winmodem.ko
> /lib/modules/2.6.31.5-127.fc12.i686.PAE/extra/ungrab-winmodem.ko
> /sbin/depmod -a
> [olivares@localhost ungrab-winmodem-20090716]$
>
> [root@localhost ~]# modprobe -r slamr
> [root@localhost ~]# modprobe ungrab-winmodem
> [root@localhost ~]# modprobe slamr
> [root@localhost ~]# slmodemd -c USA /dev/slamr0
> SmartLink Soft Modem: version 2.9.11 Nov 20 2009 19:20:32
> symbolic link `/dev/ttySL0' -> `/dev/pts/3' created.
> modem `slamr0' created. TTY is `/dev/pts/3'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> [root@localhost ~]# wvdial
> --> WvDial: Internet dialer version 1.60
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> ^CCaught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Fri Nov 20 19:28:00 2009
>
>
> [root@localhost ~]# wvdial
> --> WvDial: Internet dialer version 1.60
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> ^CCaught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Fri Nov 20 19:30:40 2009
>
> [root@localhost ~]# wvdial
> --> WvDial: Internet dialer version 1.60
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
> OK
> --> Modem initialized.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Sending: ATDT7072000
> --> Waiting for carrier.
> ^CCaught signal 2: Attempting to exit gracefully...
> ATDT7072000
> NO CARRIER
> ERROR
> --> No Carrier! Trying again.
> --> Disconnecting at Fri Nov 20 19:33:58 2009
>
>
> Regards,
>
> Antonio
>
> On 11/20/09, Marvin Stodolsky <marvin.stodolsky@...> wrote:
>> Antonio,
>>
>> THanks for running the test.
>> We will just have wait longer for the kernel fix.
>>
>> MarvS
>>
>> On Thu, Nov 19, 2009 at 7:17 PM, Antonio Olivares
>> <olivares14031@...> wrote:
>>> Here are the results. Tried
>>> # modprobe slamr
>>> and
>>> # slmodemd -c USA /dev/slamr0
>>>
>>> but could not connect :(, and serial driver grabbed :(, I got NO
>>> CARRIER, but then I used modprobe ungrab-winmodem and I achieved
>>> connection. See the following:
>>>
>>> [olivares@localhost ~]$ su -
>>> Password:
>>> [root@localhost ~]# uname -r
>>> 2.6.30.5
>>> [root@localhost ~]# ls /dev/slamr0
>>> ls: cannot access /dev/slamr0: No such file or directory
>>> [root@localhost ~]# modprobe slamr
>>> [root@localhost ~]# slmodemd -c USA /dev/slamr0
>>> SmartLink Soft Modem: version 2.9.11 Nov 8 2009 17:20:18
>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>> modem `slamr0' created. TTY is `/dev/pts/1'
>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>
>>>
>>> SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
>>> device 163c:3052 is grabbed by driver serial: try to release
>>> serial 0000:05:02.0: PCI INT A disabled
>>> slamr: SmartLink AMRMO modem.
>>> slamr: probe 163c:3052 SL1900 card...
>>> slamr 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>>> slamr: slamr0 is SL1900 card.
>>>
>>> [root@localhost ~]# wvdial
>>> --> WvDial: Internet dialer version 1.60
>>> --> Cannot get information for serial port.
>>> --> Initializing modem.
>>> --> Sending: ATZ
>>> ATZ
>>> OK
>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
>>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
>>> OK
>>> --> Modem initialized.
>>> --> Sending: ATDT7072000
>>> --> Waiting for carrier.
>>> ATDT7072000
>>> --> Timed out while dialing. Trying again.
>>> --> Sending: ATDT7072000
>>> --> Waiting for carrier.
>>> NO CARRIER
>>> ATDT7072000
>>> --> No Carrier! Trying again.
>>> --> Sending: ATDT7072000
>>> --> Waiting for carrier.
>>> NO CARRIER
>>> ATDT7072000
>>> --> No Carrier! Trying again.
>>> --> Sending: ATDT7072000
>>> --> Waiting for carrier.
>>> NO CARRIER
>>>
>>> [root@localhost ~]# tail -f /var/log/messages
>>> Nov 19 18:11:02 localhost kernel: EXT3 FS on sda2, internal journal
>>> Nov 19 18:11:02 localhost kernel: EXT3-fs: mounted filesystem with
>>> writeback data mode.
>>> Nov 19 18:11:03 localhost hald: mounted /dev/sda2 on behalf of uid 500
>>> Nov 19 18:11:03 localhost hald: mounted /dev/sda3 on behalf of uid 500
>>> Nov 19 18:11:51 localhost kernel: device 163c:3052 is grabbed by
>>> driver serial: try to release
>>> Nov 19 18:11:51 localhost kernel: serial 0000:05:02.0: PCI INT A
>>> disabled
>>> Nov 19 18:11:51 localhost kernel: slamr: SmartLink AMRMO modem.
>>> Nov 19 18:11:51 localhost kernel: slamr: probe 163c:3052 SL1900 card...
>>> Nov 19 18:11:51 localhost kernel: slamr 0000:05:02.0: PCI INT A -> GSI
>>> 18 (level, low) -> IRQ 18
>>> Nov 19 18:11:51 localhost kernel: slamr: slamr0 is SL1900 card.
>>>
>>>
>>>
>>> [root@localhost ~]# modprobe ungrab-winmodem
>>> [root@localhost ~]# modprobe slamr
>>> [root@localhost ~]# slmodemd -c USA /dev/slamr0
>>> SmartLink Soft Modem: version 2.9.11 Nov 8 2009 17:20:18
>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>> modem `slamr0' created. TTY is `/dev/pts/1'
>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>> ^C[root@localhost ~]# slmodemd -c USA /dev/slamr0 &
>>> [1] 2789
>>> [root@localhost ~]# SmartLink Soft Modem: version 2.9.11 Nov 8 2009
>>> 17:20:18
>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>> modem `slamr0' created. TTY is `/dev/pts/1'
>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>
>>>
>>> Nov 19 18:11:51 localhost kernel: device 163c:3052 is grabbed by
>>> driver serial: try to release
>>> Nov 19 18:11:51 localhost kernel: serial 0000:05:02.0: PCI INT A
>>> disabled
>>> Nov 19 18:11:51 localhost kernel: slamr: SmartLink AMRMO modem.
>>> Nov 19 18:11:51 localhost kernel: slamr: probe 163c:3052 SL1900 card...
>>> Nov 19 18:11:51 localhost kernel: slamr 0000:05:02.0: PCI INT A -> GSI
>>> 18 (level, low) -> IRQ 18
>>> Nov 19 18:11:51 localhost kernel: slamr: slamr0 is SL1900 card.
>>> Nov 19 18:15:45 localhost kernel: slamr 0000:05:02.0: PCI INT A disabled
>>> Nov 19 18:15:56 localhost kernel: slamr: SmartLink AMRMO modem.
>>> Nov 19 18:15:56 localhost kernel: slamr: probe 163c:3052 SL1900 card...
>>> Nov 19 18:15:56 localhost kernel: slamr 0000:05:02.0: PCI INT A -> GSI
>>> 18 (level, low) -> IRQ 18
>>> Nov 19 18:15:56 localhost kernel: slamr: slamr0 is SL1900 card.
>>>
>>>
>>> [root@localhost ~]# wvdial
>>> --> WvDial: Internet dialer version 1.60
>>> --> Cannot get information for serial port.
>>> --> Initializing modem.
>>> --> Sending: ATZ
>>> ATZ
>>> OK
>>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
>>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
>>> OK
>>> --> Modem initialized.
>>> --> Sending: ATDT7072000
>>> --> Waiting for carrier.
>>> ATDT7072000
>>> CONNECT 42667
>>> --> Carrier detected. Starting PPP immediately.
>>> --> Starting pppd at Thu Nov 19 18:17:20 2009
>>> --> Pid of pppd: 2802
>>> --> Using interface ppp0
>>> --> pppd: 0��
>>> --> pppd: 0��
>>> --> pppd: 0��
>>> --> local IP address 66.201.8.46
>>> --> pppd: 0��
>>> --> remote IP address 66.201.8.6
>>> --> pppd: 0��
>>> --> primary DNS address 66.201.0.203
>>> --> pppd: 0��
>>> --> secondary DNS address 66.94.120.9
>>> --> pppd: 0��
>>>
>>>
>>> Nov 19 18:11:51 localhost kernel: device 163c:3052 is grabbed by
>>> driver serial: try to release
>>> Nov 19 18:11:51 localhost kernel: serial 0000:05:02.0: PCI INT A
>>> disabled
>>> Nov 19 18:11:51 localhost kernel: slamr: SmartLink AMRMO modem.
>>> Nov 19 18:11:51 localhost kernel: slamr: probe 163c:3052 SL1900 card...
>>> Nov 19 18:11:51 localhost kernel: slamr 0000:05:02.0: PCI INT A -> GSI
>>> 18 (level, low) -> IRQ 18
>>> Nov 19 18:11:51 localhost kernel: slamr: slamr0 is SL1900 card.
>>> Nov 19 18:15:45 localhost kernel: slamr 0000:05:02.0: PCI INT A disabled
>>> Nov 19 18:15:56 localhost kernel: slamr: SmartLink AMRMO modem.
>>> Nov 19 18:15:56 localhost kernel: slamr: probe 163c:3052 SL1900 card...
>>> Nov 19 18:15:56 localhost kernel: slamr 0000:05:02.0: PCI INT A -> GSI
>>> 18 (level, low) -> IRQ 18
>>> Nov 19 18:15:56 localhost kernel: slamr: slamr0 is SL1900 card.
>>> Nov 19 18:17:20 localhost kernel: PPP generic driver version 2.4.2
>>> Nov 19 18:17:20 localhost pppd[2802]: pppd 2.4.4 started by root, uid 0
>>> Nov 19 18:17:20 localhost pppd[2802]: Using interface ppp0
>>> Nov 19 18:17:20 localhost pppd[2802]: Connect: ppp0 <--> /dev/pts/1
>>> Nov 19 18:17:21 localhost pppd[2802]: PAP authentication succeeded
>>> Nov 19 18:17:21 localhost kernel: PPP Deflate Compression module
>>> registered
>>> Nov 19 18:17:21 localhost pppd[2802]: local IP address 66.201.8.46
>>> Nov 19 18:17:21 localhost pppd[2802]: remote IP address 66.201.8.6
>>> Nov 19 18:17:21 localhost pppd[2802]: primary DNS address 66.201.0.203
>>> Nov 19 18:17:21 localhost pppd[2802]: secondary DNS address 66.94.120.9
>>>
>>>
>>> Regards,
>>>
>>> Antonio
>>>
>>> On 11/19/09, Marvin Stodolsky <marvin.stodolsky@...> wrote:
>>>> Concur that this seems to be a special case,
>>>> whereunder the slamr driver is sufficing for an AC'97 series modem,
>>>> for which the snd-intel8x0m is typically recommended.
>>>>
>>>> MarvS
>>>> scanModem maintainer
>>>>
>>>> On Thu, Nov 19, 2009 at 12:42 PM, Antonio Olivares
>>>> <olivares14031@...> wrote:
>>>>> On Thu, Nov 19, 2009 at 7:39 AM, Marvin Stodolsky
>>>>> <marvin.stodolsky@...> wrote:
>>>>>> Davide,
>>>>>>
>>>>>> Thanks for the report. It looks as if:
>>>>>> 1) the slamr driver (rather than snd-intel8x0m) suffices for your
>>>>>> Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller "
>>>>>>> CLASS=0703
>>>>>>> PCIDEV=1039:7013
>>>>>>> SUBSYS=1558:2202
>>>>>>> IRQ=10
>>>>>>> SOFT=1039:7013.MC97
>>>>>>> CodecArchived=SIL22
>>>>>> wherein SIL22 is a Smartlink codec.
>>>>>> This is a good result, because your sound and modem support are now
>>>>>> independent.
>>>>>>
>>>>>> 2) slamr functioning under 2.6.28 no longer needs ungrab-winmodem
>>>>>> This was a hoped for change, though we did not no when kernel changes
>>>>>> would make it possible.
>>>>>>
>>>>>> Antonio,
>>>>>> Please check whether ungrab-winmodem is still necessary under your
>>>>>> 2.6.30 kernel.
>>>>> I still need it :(, it will show that the serial grabbed the modem.
>>>>>
>>>>> I can send you output in this case to show that it is needed.
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>> Antonio
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>> On Thu, Nov 19, 2009 at 3:36 AM, <davidealiperti@...> wrote:
>>>>>>> Hi Marvis,
>>>>>>>
>>>>>>> here the output of the command and the modemdata:
>>>>>>>
>>>>>>> marina@marina-desktop:~$ lsmod |grep ungrab
>>>>>>> marina@marina-desktop:~$ lsmod |grep slamr
>>>>>>> slamr 435496 2
>>>>>>>
>>>>>>>
>>>>>>> Only plain text email is forwarded by the Discuss@...
>>>>>>> List
>>>>>>> Server,
>>>>>>> as HTML can contain viruses. Use as the email Subject Line:
>>>>>>> YourName, YourCountry kernel 2.6.28-11-generic
>>>>>>> With this Subject Line cogent experts will be alerted, and useful
>>>>>>> case
>>>>>>> names left in the Archive.
>>>>>>> YourCountry will enable Country specific guidance. Linux experts in
>>>>>>> YourCountry
>>>>>>> can be found through: http://www.linux.org/groups/index.html.
>>>>>>> They will know your Country's modem code, which may be essential for
>>>>>>> dialup
>>>>>>> service.
>>>>>>> Responses from Discuss@... are sometimes blocked by an
>>>>>>> Internet
>>>>>>> Provider mail filters.
>>>>>>> So in a day, also check the Archived responses at
>>>>>>> http://www.linmodems.org
>>>>>>> -------------------------- System information
>>>>>>> ----------------------------
>>>>>>> CPU=i686,
>>>>>>> Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3
>>>>>>> (Ubuntu
>>>>>>> 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
>>>>>>> scanModem update of: 2009_11_14
>>>>>>> The modem symbolic link is /dev/modem -> ttySL0
>>>>>>> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
>>>>>>>
>>>>>>> Presently install your Linux Distributions dkms package. It provides
>>>>>>> for
>>>>>>> automated driver updates,
>>>>>>> following upgrade of your kernel. For details see
>>>>>>> http://linux.dell.com/projects.shtml#dkms
>>>>>>>
>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files
>>>>>>>
>>>>>>> Potentially useful modem drivers now loaded are:
>>>>>>> slamr
>>>>>>>
>>>>>>> slamrTest=mc97 codec
>>>>>>> Attached USB devices are:
>>>>>>> ID 15d9:0a33
>>>>>>> ID 090c:1000 Feiya Technology Corp. Memory Bar
>>>>>>> If a cellphone is not detected, see
>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>>>>> A sample report is:
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>>>>>
>>>>>>> If a USB modem or cellphone is attached and was not detected, please
>>>>>>> provide available information in your request to
>>>>>>> discuss@...
>>>>>>>
>>>>>>> For candidate card in slot 00:01.6, firmware information and bootup
>>>>>>> diagnostics are:
>>>>>>> PCI slot PCI ID SubsystemID Name
>>>>>>> ---------- --------- --------- --------------
>>>>>>> 00:01.6 1039:7013 1558:2202 Modem: Silicon
>>>>>>> Integrated
>>>>>>> Systems [SiS] AC'97 Modem Controller
>>>>>>>
>>>>>>> Modem interrupt assignment and sharing:
>>>>>>> 10: 18000 XT-PIC-XT eth0, SiS630
>>>>>>> --- Bootup diagnostics for card in PCI slot 00:01.6 ----
>>>>>>> [ 0.939028] pci 0000:00:01.6: reg 10 io port: [0x3600-0x36ff]
>>>>>>> [ 0.939038] pci 0000:00:01.6: reg 14 io port: [0x3800-0x387f]
>>>>>>> [ 0.939073] pci 0000:00:01.6: PME# supported from D3hot D3cold
>>>>>>> [ 0.939080] pci 0000:00:01.6: PME# disabled
>>>>>>> [ 2.922090] serial 0000:00:01.6: PCI INT C -> Link[LNKC] -> GSI
>>>>>>> 10
>>>>>>> (level, low) -> IRQ 10
>>>>>>> [ 2.922107] serial 0000:00:01.6: PCI INT C disabled
>>>>>>> [ 18.723333] slamr 0000:00:01.6: PCI INT C -> Link[LNKC] -> GSI 10
>>>>>>> (level,
>>>>>>> low) -> IRQ 10
>>>>>>> [ 416.291258] slamr 0000:00:01.6: PCI INT C disabled
>>>>>>> [ 433.774476] slamr 0000:00:01.6: PCI INT C -> Link[LNKC] -> GSI 10
>>>>>>> (level,
>>>>>>> low) -> IRQ 10
>>>>>>>
>>>>>>> The PCI slot 00:01.6 of the modem card may be disabled early in
>>>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about
>>>>>>> possible
>>>>>>> fixes.
>>>>>>> Send dmesg.txt along with ModemData.txt to discuss@...
>>>>>>> if help is needed.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>>>>>>> The ALSA packages provide audio support and also drivers for some
>>>>>>> modems.
>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>>>>>>>
>>>>>>> The ALSA verion is 1.0.18
>>>>>>> The modem cards detected by "aplay -l" are: None
>>>>>>>
>>>>>>>
>>>>>>> The /proc/asound/pcm file reports:
>>>>>>> -----------------------
>>>>>>> 00-00: trident_dx_nx : Trident 4DWave : playback 32 : capture 1
>>>>>>> 00-01: trident_dx_nx IEC958 : Trident 4DWave IEC958 : playback 1
>>>>>>>
>>>>>>> about /proc/asound/cards:
>>>>>>> ------------------------
>>>>>>> 0 [SI7018 ]: SI7018 - SiS SI7018
>>>>>>> SiS SI7018 PCI Audio at 0x3400, irq 5
>>>>>>> === Finished firmware and bootup diagnostics, next deducing cogent
>>>>>>> software.
>>>>>>> ===
>>>>>>>
>>>>>>> Predictive diagnostics for card in bus 00:01.6:
>>>>>>> Modem chipset detected on
>>>>>>> NAME="Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
>>>>>>> "
>>>>>>> CLASS=0703
>>>>>>> PCIDEV=1039:7013
>>>>>>> SUBSYS=1558:2202
>>>>>>> IRQ=10
>>>>>>> SOFT=1039:7013.MC97
>>>>>>> CodecArchived=SIL22
>>>>>>> slamrTest=mc97 codec
>>>>>>> IDENT=slmodemd
>>>>>>> SLMODEMD_DEVICE=modem:1
>>>>>>>
>>>>>>> For candidate modem in: 00:01.6
>>>>>>> 0703 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>>>>> Controller
>>>>>>> Primary device ID: 1039:7013
>>>>>>> Subsystem PCI_id 1558:2202
>>>>>>> Softmodem codec or chipset from diagnostics:
>>>>>>> from Archives: SIL22
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Support type needed or chipset: slmodemd
>>>>>>>
>>>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver:
>>>>>>> provides Low Level support enabling contact with the modem
>>>>>>> hardware.
>>>>>>> For all BUT Conexant chip soft modems (using hsfmodem software)
>>>>>>> complementary High Level support is through a Smartlink utility:
>>>>>>> slmodemd
>>>>>>>
>>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/
>>>>>>> the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd.
>>>>>>> Unpack
>>>>>>> under
>>>>>>> Linux with:
>>>>>>> $ tar zxf SLMODEMD.gcc4.3.tar.gz
>>>>>>> and read instructions therein. But briefly, the modem is setup with
>>>>>>> command:
>>>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
>>>>>>> reporting dynamic creation of ports:
>>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number
>>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
>>>>>>> through
>>>>>>> guidance.
>>>>>>>
>>>>>>> Writing DOCs/Smartlink.txt
>>>>>>>
>>>>>>> Message
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg01358.html
>>>>>>> is in part summarized below.
>>>>>>>
>>>>>>> The snd-trident driver is not fully compatible with slmodemd
>>>>>>> support.
>>>>>>> The may be errors written to /var/log/messages like:
>>>>>>> codec_semaphore: semaphore is not ready [0x1][0x1300]
>>>>>>> Check with:
>>>>>>> $ dmesg | grep semaphore
>>>>>>>
>>>>>>> A potential work around is to unload drivers:
>>>>>>> # modprobe -r snd-intel8x0m
>>>>>>> # modprobe -r snd-intel8x0
>>>>>>> # modprobe -r snd-trident
>>>>>>>
>>>>>>> Then reload only:
>>>>>>> # modprobe snd-intel8x0
>>>>>>> # modprobe snd-intel8x0m
>>>>>>> and test the modem.
>>>>>>>
>>>>>>> If snd-trident cannot be unloaded, it may be necessary to disable it
>>>>>>> by:
>>>>>>> # cd /lib/modules/2.6.17-10-generic/kernel/sound/pci/trident/
>>>>>>> # mv snd-trident.ko snd-trident.ko~
>>>>>>> After a reboot, verify that the driver is not loaded. It should NOT
>>>>>>> be
>>>>>>> disaplayed by:
>>>>>>> $ lsmod | grep snd-trident.
>>>>>>>
>>>>>>> Once a success with the modem has been obtained, the setup can be
>>>>>>> made
>>>>>>> easier by
>>>>>>> adding to /etc/modprobe.d/blacklist (or equivalent on your System)
>>>>>>> blacklist snd_intel8x0m
>>>>>>> blacklist snd_trident
>>>>>>>
>>>>>>> and to /etc/modules
>>>>>>> snd_intel8x0
>>>>>>> snd_intel8x0m
>>>>>>>
>>>>>>> On Ubuntu systems such edits of Root permission files can be done
>>>>>>> with:
>>>>>>> $ sudo gedit path_to/FileName
>>>>>>>
>>>>>>> ============ end Smartlink section =====================
>>>>>>>
>>>>>>> Completed candidate modem analyses.
>>>>>>>
>>>>>>> The base of the UDEV device file system is: /dev/.udev
>>>>>>>
>>>>>>> Versions adequately match for the compiler installed: 4.3.3
>>>>>>> and the compiler used in kernel assembly: 4.3.3
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Minimal compiling resources appear complete:
>>>>>>> make utility - /usr/bin/make
>>>>>>> Compiler version 4.3
>>>>>>> linuc_headers base folder /lib/modules/2.6.28-11-generic/build
>>>>>>>
>>>>>>> However some compilations and executable functions may need
>>>>>>> additional
>>>>>>> files,
>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection
>>>>>>> installed
>>>>>>> in
>>>>>>> /usr/include/ .
>>>>>>> For martian_modem, additional required packages are needed. The
>>>>>>> also
>>>>>>> required headers of package libc6 are commonly installed by default.
>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and
>>>>>>> libc6-dev
>>>>>>> packages, for kernels 2.6.24 and later versions.
>>>>>>> In not included on your install CD, search for them at
>>>>>>> http://packages.ubuntu.com
>>>>>>> or comparable Repository for other Linux distros.
>>>>>>> When compiling ALSA drivers, the utility "patch" will also be
>>>>>>> needed.
>>>>>>>
>>>>>>>
>>>>>>> Compressed files at: /usr/src/alsa-driver.tar.bz2
>>>>>>>
>>>>>>>
>>>>>>> If a driver compilation fails, with message including some lack of
>>>>>>> some
>>>>>>> FileName.h (stdio.h for example), then
>>>>>>> Some additional kernel-header files need installation to
>>>>>>> /usr/include.
>>>>>>> The
>>>>>>> minimal additional packages are libc6-dev
>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev
>>>>>>>
>>>>>>> If an alternate ethernet connection is available,
>>>>>>> $ apt-get update
>>>>>>> $ apt-get -s install linux-kernel-devel
>>>>>>> will install needed packages.
>>>>>>> For Debian/Ubuntu related distributions, run the following command
>>>>>>> to
>>>>>>> display the needed package list:
>>>>>>>
>>>>>>> Otherwise packages have to be found through
>>>>>>> http://packages.ubuntu.com
>>>>>>> Once downloaded and transferred into a Linux partition,
>>>>>>> they can be installed alltogether with:
>>>>>>> $ sudo dpkg -i *.deb
>>>>>>>
>>>>>>>
>>>>>>> Checking pppd properties:
>>>>>>> -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
>>>>>>>
>>>>>>> In case of an "error 17" "serial loopback" problem, see:
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>>>>>>
>>>>>>> To enable dialout without Root permission do:
>>>>>>> $ su - root (not for Ubuntu)
>>>>>>> sudo chmod a+x /usr/sbin/pppd
>>>>>>> or under Ubuntu related Linuxes
>>>>>>> sudo chmod a+x /usr/sbin/pppd
>>>>>>>
>>>>>>> Checking settings of: /etc/ppp/options
>>>>>>> asyncmap 0
>>>>>>> noauth
>>>>>>> crtscts
>>>>>>> lock
>>>>>>> hide-password
>>>>>>> modem
>>>>>>> proxyarp
>>>>>>> noipx
>>>>>>>
>>>>>>> In case of a message like:
>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>>>>>>> see
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>>>>>>
>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
>>>>>>> Which can interfere with Browser naviagation.
>>>>>>>
>>>>>>> Don't worry about the following, it is for experts should trouble
>>>>>>> shooting
>>>>>>> be necessary.
>>>>>>> ==========================================================
>>>>>>>
>>>>>>> Checking for modem support lines:
>>>>>>> --------------------------------------
>>>>>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6
>>>>>>> 2009-11-19
>>>>>>> 09:19
>>>>>>> /dev/modem -> ttySL0
>>>>>>> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root
>>>>>>> 10
>>>>>>> 2009-11-19 09:26 /dev/ttySL0 -> /dev/pts/0
>>>>>>> Within /etc/udev/ files:
>>>>>>>
>>>>>>> Within /etc/modprobe.conf files:
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>>>>>>> order
>>>>>>> to
>>>>>>> blacklist unwanted modem drivers
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>>>>>>> Within any ancient /etc/devfs files:
>>>>>>>
>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files:
>>>>>>> sudo modprobe ungrab_winmodems
>>>>>>> --------- end modem support lines --------
>>>>>>>
>>>>>>> thank again
>>>>>>> ciao
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

From forum: Linux Winmodem Support - Discussion

Re: sm56 ubuntu 9.10

2009-11-21T11:29:28Z

Mirko,

There are a few chipsets which are under Microsoft all called sm56.
Only the 1057:3052 chipset is supported in principle by slamr.
But in practice, the last kernel supported is 2.8.30, with a "No
Carrier" error reported for 2.8.31

Did you even have slamr support under earlier kernels?
If not best download and run scanModem. Then send us the output ModemData.txt

MarvS

On Sat, Nov 21, 2009 at 2:01 PM, Jacques Goldberg
<Jacques.Goldberg@...> wrote:

> Excuse me Mirko but every human is allowed and bound to make mistakes: did
> you remember to have
>
> Carrier Check = no
>
> in your wvdial.conf ?
>
>
> If your problem is more serious than that, can you please supply us with
> your ModemData.txt generated by scanModem , and a copy of the output of
> wvdial when you try to connect ?
>
> (http://linmodems.technion.ac.il#scanModem , if you did not use scanModem
> before)
>
>
> Jacques
>
> Mirko Zanda wrote:
>
>> i'm trying to get sm56 working on ubuntu on 9.10 but it keeps saying
>> no carrier... i'm sure wvdial.conf is ok because it works in previous
>> versions. anyone who can help?
>>
>
>

From forum: Linux Winmodem Support - Discussion