MIPS kernel snapshots - 2.6.30-rc8

[Martin Michlmayr]

I've built kernel snapshots for mips and mipsel based on 2.6.30-rc8.
Please test them on your favourite MIPS machine and report any
problems you encounter to this list.

You can find the kernel packages at
http://people.debian.org/~tbm/mips/kernel/r13723/

--
Martin Michlmayr
http://www.cyrius.com/


--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

[Mark Mason-2]

Hello,

On Thu, 2009-06-04 at 08:03 +0200, Martin Michlmayr wrote:
> I've built kernel snapshots for mips and mipsel based on 2.6.30-rc8.
> Please test them on your favourite MIPS machine and report any
> problems you encounter to this list.

For the BCM1480, what is the expected Sibyl fragment? Using the one that
I normally use for kernels built from linux-mips.git, output hangs at
the console handover. I can't tell how much farther (if any) the kernel
is getting:


[    0.000000]     0: 0x000c0000 -> 0x000cffff            
[CPU1]                                                                          
[cpu1]                                                                          
[CPU2]                                                                          
[cpu2]                                                                          
[CPU3]                                                                          
[    0.000000] Detected 3 available secondary CPU(s)
cp[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 250120                                
[    0.000000] Kernel command line: root=/dev/nfs ip=any
nfsroot=192.168.1.7:/ho
me/mason/debian-root                                                            
[    0.000000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
bytes.  
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 byt
es                                                                              
[    0.000000]
NR_IRQS:128                                                      
[    0.000000] PID hash table entries: 4096 (order: 12, 32768
bytes)            
[    0.000000] Console: colour dummy device
80x25                              
[    0.000000] console handover: boot [early0] -> real
[tty0]                  


>
> You can find the kernel packages at
> http://people.debian.org/~tbm/mips/kernel/r13723/
>
> --
> Martin Michlmayr
> http://www.cyrius.com/
>
>


--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

[Martin Michlmayr]

* Mark Mason <mmason@...> [2009-09-09 20:09]:
> For the BCM1480, what is the expected Sibyl fragment? Using the one that
> I normally use for kernels built from linux-mips.git, output hangs at
> the console handover. I can't tell how much farther (if any) the kernel
> is getting:

Do you pass console=duart0 or console=ttyS0 to the kernel?  The latter
is required these days (but that should be the same for linux-mips.git).
Anyway, I don't have such hardware anymore, so I cannot comment.

Thomas, can you check if a Debian kernel boots on the BigSur or
whether we need some patches or config changes?

Thanks.

>
>
> [    0.000000]     0: 0x000c0000 -> 0x000cffff            
> [CPU1]                                                                          
> [cpu1]                                                                          
> [CPU2]                                                                          
> [cpu2]                                                                          
> [CPU3]                                                                          
> [    0.000000] Detected 3 available secondary CPU(s)
> cp[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 250120                                
> [    0.000000] Kernel command line: root=/dev/nfs ip=any
> nfsroot=192.168.1.7:/ho
> me/mason/debian-root                                                            
> [    0.000000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
> bytes.  
> [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases,
> linesize 32 byt
> es                                                                              
> [    0.000000]
> NR_IRQS:128                                                      
> [    0.000000] PID hash table entries: 4096 (order: 12, 32768
> bytes)            
> [    0.000000] Console: colour dummy device
> 80x25                              
> [    0.000000] console handover: boot [early0] -> real
> [tty0]                  
>
>
> >
> > You can find the kernel packages at
> > http://people.debian.org/~tbm/mips/kernel/r13723/
> >
> > --
> > Martin Michlmayr
> > http://www.cyrius.com/
> >
> >

--
Martin Michlmayr
http://www.cyrius.com/


--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

[Mark Mason-2]

Hello,
On Fri, 2009-09-11 at 13:11 +0100, Martin Michlmayr wrote:
> Do you pass console=duart0 or console=ttyS0 to the kernel?  The latter
> is required these days (but that should be the same for linux-mips.git).
> Anyway, I don't have such hardware anymore, so I cannot comment.

Hmm. I wasn't passing that, but then it doesn't seem to be required for
linux-mips.git kernels - just those I get from the Debian project.

After fixing that, it gets farther but still hangs partway through the
boot process:


CFE version 1.3.2 for BCM91480B (64bit,MP,BE,MIPS)
Build Date: Thu Jun  8 09:57:58 PDT 2006 (khinzaw@lc-sj1-091)
Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom Corporation.

[AREN]
Initializing Arena.
Initializing PCI. [normal]
[PCIH]
PCI[0] bus 0 slot 0/0: configuring bus for 33MHz PCI
[PCIB]
[PCIS]
PCI[0] bus 0 slot 0/0: SiByte, Inc. BCM1480 PCI-X Host Bridge (host
bridge, rev 0x01)
PCI[0] bus 0 slot 1/0: unknown vendor 0x1095 product 0x0680 (RAID mass
storage, rev 0x02)
[PCIH]
HT maxima: 400MHz, 16 bits
[PCIB]
PCI[1] bus 0 slot 0/0: secondary bad or never ready
PCI[1] bus 0 slot 1/0: secondary bad or never ready
[PCIS]
PCI[1] bus 0 slot 0/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 1/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 2/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 4/0: SiByte, Inc. BCM1480 HyperTransport Host Bridge
(host bridge, rev 0x01)
PCI[1] bus 3 slot 1/0: Advanced Micro Devices (PLX) HT7520 PCI-X Tunnel
(PCI bridge, rev 0x12)
PCI[1] bus 3 slot 1/1: Advanced Micro Devices (PLX) HT7520 PCI-X IOAPIC
(8259 PIC system, interface 0x10, rev 0x01)
PCI[1] bus 3 slot 2/0: Advanced Micro Devices (PLX) HT7520 PCI-X Tunnel
(PCI bridge, rev 0x12)
PCI[1] bus 3 slot 2/1: Advanced Micro Devices (PLX) HT7520 PCI-X IOAPIC
(8259 PIC system, interface 0x10, rev 0x01)
[DEVI]
Initializing Devices.
BCM91480B board revision 1
BCM91480B configuration switches: 0xc1010
sbeth: found phy 1, vendor 000818 part 0B
sbeth: found phy 2, vendor 000818 part 0B
sbeth: found phy 3, vendor 000818 part 0B
sbeth: found phy 4, vendor 000818 part 0B
PCIIDE: 1 controllers found
CPU: 1480 B0 (pass2), 4 cpus
L2Cache: 1MB
SysCfg: 0000000040772D00 [PLL_DIV:20, SW_DIV:5, CCNUMA:disable,
IOB_DIV:CPUCLK/4]
Memory controller #0: 250MHz
Memory controller #1: 250MHz
Switch Clock: 400MHz
CPU type 0x1041100: 1000MHz
Total memory: 0x40000000 bytes (1024MB)

Total memory used by CFE:  0x8FE8B000 - 0x8FFFF780 (1525632)
Initialized Data:          0x8FEEBB20 - 0x8FEFABF0 (61648)
BSS Area:                  0x8FEFABF0 - 0x8FEFD770 (11136)
Local Heap:                0x8FEFD780 - 0x8FFFD780 (1048576)
Stack Area:                0x8FFFD780 - 0x8FFFF780 (8192)
Text (code) segment:       0x8FE8B000 - 0x8FEEB26A (393834)
Boot area (physical):      0x0FE4A000 - 0x0FE8A000
Relocation Factor:         I:F028B000 - D:F028B000
[ENVI]

[CFE ]
CFE> ifconfig eth0 -auto; boot 192.168.1.7:sibyl
sbeth: found phy 1, vendor 000818 part 0B
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-02-4C-01-6D-A9, ipaddr 192.168.1.39, mask
255.255.255.0
        gateway 192.168.1.1, nameserver 192.168.1.1, domain mshome.net
Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.7:sibyl Options:(null)
Loading: ....... 126648 bytes read
Entry at 0x20000000
Closing network.
Starting program at 0x20000000

[RUN!]
SiByte Loader, version 2.4.2
Built on Jul 28 2004
sbeth: found phy 1, vendor 000818 part 0B
Network device 'eth0' configured
Getting configuration file tftp:192.168.1.7:sibyl.conf...
Config file retrieved.
Available configurations:
  debian-nfs
  test
  gentoo-sda1
  gentoo-nfs
  debian4-nfs
  debian-disk
  debian-install
  test-nfs
  test2-nfs
  test3-nfs
  test4-nfs
  test-disk
  test2-disk
  test3-disk
  clfs
  wrs
  gentoo-le
  gentoo-disk
  gentoo-n32
  installer
Boot which configuration [debian-nfs]: test
Loading kernel (ELF64):
    4925632@0x80100000
done
Set up command line arguments to: root=/dev/nfs console=ttyS0,115200
ip=any nfsroot=192.168.1.7:/home/mason/debian-root
Setting up initial prom_init arguments
Cleaning up state...
Transferring control to the kernel.
Kernel entry point is at 0x80106150
Linux version 2.6.31-rc9-00013-gfb43039 (mason@linux-7kdl) (gcc version
3.4.3) #29 SMP Wed Sep 9 20:23:47 PDT 2009
console [early0] enabled
CPU revision is: 01041100 (SiByte SB1A)
FPU revision is: 000f0103
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Broadcom SiByte BCM1480 B0 (pass2) @ 1000 MHz (SB-1A rev 0)
Board type: SiByte BCM91x80A/B (BigSur)
Determined physical RAM map:
 memory: 000000000fe8ae00 @ 0000000000000000 (usable)
 memory: 000000001ffffe00 @ 0000000080000000 (usable)
 memory: 000000000ffffe00 @ 00000000c0000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  DMA32    0x00000000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000fe8a
    0: 0x00080000 -> 0x0009ffff
    0: 0x000c0000 -> 0x000cffff
[CPU1]
[cpu1]
[CPU2]
[cpu2]
[CPU3]
Detected 3 available secondary CPU(s)
cBuilt 1 zonelists in Zone order, mobility grouping on.  Total pages:
250120
Kernel command line: root=/dev/nfs console=ttyS0,115200 ip=any
nfsroot=192.168.1.7:/home/mason/debian-root
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Memory: 991868k/1047072k available (3526k kernel code, 54400k reserved,
1015k data, 268k init, 0k highmem)
NR_IRQS:128
Calibrating delay loop... 663.55 BogoMIPS (lpj=331776)
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
CPU revision is: 03041100 (SiByte SB1A)
FPU revision is: 000f0103
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Calibrating delay loop... 665.60 BogoMIPS (lpj=332800)
CPU revision is: 05041100 (SiByte SB1A)
FPU revision is: 000f0103
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Calibrating delay loop... 665.60 BogoMIPS (lpj=332800)
CPU revision is: 07041100 (SiByte SB1A)
FPU revision is: 000f0103
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Calibrating delay loop... 665.60 BogoMIPS (lpj=332800)
Brought up 4 CPUs
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(6220878072.154:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1938
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0001:03:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0001:03:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC



--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

[Mark Mason-2]

Sigh, my bad, I attached the wrong boot log. I really need to finish my
coffee before writing emails. Here's the one from the Debian kernel, it
hangs in just about the same place however :(.

~Mark


CFE version 1.3.2 for BCM91480B (64bit,MP,BE,MIPS)
Build Date: Thu Jun  8 09:57:58 PDT 2006 (khinzaw@lc-sj1-091)
Copyright (C) 2000,2001,2002,2003,2004,2005 Broadcom Corporation.

[AREN]
Initializing Arena.
Initializing PCI. [normal]
[PCIH]
PCI[0] bus 0 slot 0/0: configuring bus for 33MHz PCI
[PCIB]
[PCIS]
PCI[0] bus 0 slot 0/0: SiByte, Inc. BCM1480 PCI-X Host Bridge (host
bridge, rev 0x01)
PCI[0] bus 0 slot 1/0: unknown vendor 0x1095 product 0x0680 (RAID mass
storage, rev 0x02)
[PCIH]
HT maxima: 400MHz, 16 bits
[PCIB]
PCI[1] bus 0 slot 0/0: secondary bad or never ready
PCI[1] bus 0 slot 1/0: secondary bad or never ready
[PCIS]
PCI[1] bus 0 slot 0/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 1/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 2/0: SiByte, Inc. BCM1480 HyperTransport Bridge
(Secondary) (PCI bridge, rev 0x01)
PCI[1] bus 0 slot 4/0: SiByte, Inc. BCM1480 HyperTransport Host Bridge
(host bridge, rev 0x01)
PCI[1] bus 3 slot 1/0: Advanced Micro Devices (PLX) HT7520 PCI-X Tunnel
(PCI bridge, rev 0x12)
PCI[1] bus 3 slot 1/1: Advanced Micro Devices (PLX) HT7520 PCI-X IOAPIC
(8259 PIC system, interface 0x10, rev 0x01)
PCI[1] bus 3 slot 2/0: Advanced Micro Devices (PLX) HT7520 PCI-X Tunnel
(PCI bridge, rev 0x12)
PCI[1] bus 3 slot 2/1: Advanced Micro Devices (PLX) HT7520 PCI-X IOAPIC
(8259 PIC system, interface 0x10, rev 0x01)
[DEVI]
Initializing Devices.
BCM91480B board revision 1
BCM91480B configuration switches: 0xc1010
sbeth: found phy 1, vendor 000818 part 0B
sbeth: found phy 2, vendor 000818 part 0B
sbeth: found phy 3, vendor 000818 part 0B
sbeth: found phy 4, vendor 000818 part 0B
PCIIDE: 1 controllers found
CPU: 1480 B0 (pass2), 4 cpus
L2Cache: 1MB
SysCfg: 0000000040772D00 [PLL_DIV:20, SW_DIV:5, CCNUMA:disable,
IOB_DIV:CPUCLK/4]
Memory controller #0: 250MHz
Memory controller #1: 250MHz
Switch Clock: 400MHz
CPU type 0x1041100: 1000MHz
Total memory: 0x40000000 bytes (1024MB)

Total memory used by CFE:  0x8FE8B000 - 0x8FFFF780 (1525632)
Initialized Data:          0x8FEEBB20 - 0x8FEFABF0 (61648)
BSS Area:                  0x8FEFABF0 - 0x8FEFD770 (11136)
Local Heap:                0x8FEFD780 - 0x8FFFD780 (1048576)
Stack Area:                0x8FFFD780 - 0x8FFFF780 (8192)
Text (code) segment:       0x8FE8B000 - 0x8FEEB26A (393834)
Boot area (physical):      0x0FE4A000 - 0x0FE8A000
Relocation Factor:         I:F028B000 - D:F028B000
[ENVI]

[CFE ]
CFE> ifconfig eth0 -auto; boot 192.168.1.7:sibyl
sbeth: found phy 1, vendor 000818 part 0B
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-02-4C-01-6D-A9, ipaddr 192.168.1.41, mask
255.255.255.0
        gateway 192.168.1.1, nameserver 192.168.1.1, domain mshome.net
Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.7:sibyl Options:(null)
Loading: ....... 126648 bytes read
Entry at 0x20000000
Closing network.
Starting program at 0x20000000

[RUN!]
SiByte Loader, version 2.4.2
Built on Jul 28 2004
sbeth: found phy 1, vendor 000818 part 0B
Network device 'eth0' configured
Getting configuration file tftp:192.168.1.7:sibyl.conf...
Config file retrieved.
Available configurations:
  debian-nfs
  test
  gentoo-sda1
  gentoo-nfs
  debian4-nfs
  debian-disk
  debian-install
  test-nfs
  test2-nfs
  test3-nfs
  test4-nfs
  test-disk
  test2-disk
  test3-disk
  clfs
  wrs
  gentoo-le
  gentoo-disk
  gentoo-n32
  installer
Boot which configuration [debian-nfs]: test
Loading kernel (ELF64):
    5057120@0x80100000
done
Set up command line arguments to: root=/dev/nfs console=ttyS0,115200
ip=any nfsroot=192.168.1.7:/home/mason/debian-root
Setting up initial prom_init arguments
Cleaning up state...
Transferring control to the kernel.
Kernel entry point is at 0x80105bf0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-rc8-sb1a-bcm91480b (Debian
2.6.30~rc8-1~experimental.1) (maks@...) (gcc version 4.1.3
20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Thu Jun 4 00:46:59 UTC
2009
[    0.000000] console [early0] enabled
[    0.000000] CPU revision is: 01041100 (SiByte SB1A)
[    0.000000] FPU revision is: 000f0103
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Broadcom SiByte BCM1480 B0 (pass2) @ 1000 MHz (SB-1A rev
0)
[    0.000000] Board type: SiByte BCM91x80A/B (BigSur)
[    0.000000] This kernel optimized for board runs with CFE
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 000000000fe8ae00 @ 0000000000000000 (usable)
[    0.000000]  memory: 000000001ffffe00 @ 0000000080000000 (usable)
[    0.000000]  memory: 000000000ffffe00 @ 00000000c0000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA32    0x00000000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000fe8a
[    0.000000]     0: 0x00080000 -> 0x0009ffff
[    0.000000]     0: 0x000c0000 -> 0x000cffff
[CPU1]
[cpu1]
[CPU2]
[cpu2]
[CPU3]
[    0.000000] Detected 3 available secondary CPU(s)
cp[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 250120
[    0.000000] Kernel command line: root=/dev/nfs console=ttyS0,115200
ip=any nfsroot=192.168.1.7:/home/mason/debian-root
[    0.000000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 bytes
[    0.000000] NR_IRQS:128
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Console: colour dummy device 80x25
[    0.004000] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[    0.012000] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[    0.144000] Memory: 991488k/1047072k available (3571k kernel code,
54832k reserved, 1158k data, 208k init, 0k highmem)
[    0.148000] Calibrating delay loop... 665.60 BogoMIPS (lpj=1331200)
[    0.248000] Security Framework initialized
[    0.252000] SELinux:  Disabled at boot.
[    0.256000] Mount-cache hash table entries: 256
[    0.260000] Initializing cgroup subsys ns
[    0.264000] Initializing cgroup subsys cpuacct
[    0.268000] Initializing cgroup subsys devices
[    0.272000] Initializing cgroup subsys freezer
[    0.276000] Initializing cgroup subsys net_cls
[    0.280000] Checking for the daddi bug... no.
[    0.288000] CPU revision is: 03041100 (SiByte SB1A)
[    0.288000] FPU revision is: 000f0103
[    0.288000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
bytes.
[    0.288000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 bytes
[    0.288000] Calibrating delay loop... 665.60 BogoMIPS (lpj=1331200)
[    0.384000] CPU revision is: 05041100 (SiByte SB1A)
[    0.384000] FPU revision is: 000f0103
[    0.384000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
bytes.
[    0.384000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 bytes
[    0.384000] Calibrating delay loop... 665.60 BogoMIPS (lpj=1331200)
[    0.480000] CPU revision is: 07041100 (SiByte SB1A)
[    0.480000] FPU revision is: 000f0103
[    0.480000] Primary instruction cache 32kB, VIVT, 4-way, linesize 32
bytes.
[    0.480000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 bytes
[    0.480000] Calibrating delay loop... 665.60 BogoMIPS (lpj=1331200)
[    0.576000] Brought up 4 CPUs
[    0.584000] net_namespace: 1936 bytes
[    0.588000] regulator: core version 0.5
[    0.588000] NET: Registered protocol family 16
[    0.600000] bio: create slab <bio-0> at 0
[    0.624000] NET: Registered protocol family 2
[    0.680000] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[    0.684000] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[    0.696000] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[    0.700000] TCP: Hash tables configured (established 131072 bind
65536)
[    0.708000] TCP reno registered
[    0.720000] NET: Registered protocol family 1
[    0.724000] audit: initializing netlink socket (disabled)
[    0.728000] type=2000 audit(6220880785.728:1): initialized
[    0.732000] VFS: Disk quotas dquot_6.5.2
[    0.736000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.744000] msgmni has been set to 1937
[    0.748000] alg: No test for stdrng (krng)
[    0.752000] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[    0.756000] io scheduler noop registered
[    0.760000] io scheduler anticipatory registered
[    0.764000] io scheduler deadline registered
[    0.772000] io scheduler cfq registered (default)
[    0.776000] pci 0001:03:01.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC
[    0.780000] pci 0001:03:02.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC



--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...

[Mark Mason-2]

Finally got back around to this....

console=ttyS0 does bad things. WIth console=duart0 it boots fine.

/Mark

On Sep 11, 2009, at 5:11 AM, Martin Michlmayr wrote:

> * Mark Mason <mmason@...> [2009-09-09 20:09]:
>> For the BCM1480, what is the expected Sibyl fragment? Using the one  
>> that
>> I normally use for kernels built from linux-mips.git, output hangs at
>> the console handover. I can't tell how much farther (if any) the  
>> kernel
>> is getting:
>
> Do you pass console=duart0 or console=ttyS0 to the kernel?  The latter
> is required these days (but that should be the same for linux-
> mips.git).
> Anyway, I don't have such hardware anymore, so I cannot comment.
>
> Thomas, can you check if a Debian kernel boots on the BigSur or
> whether we need some patches or config changes?
>
> Thanks.
>
>>
>>
>> [    0.000000]     0: 0x000c0000 -> 0x000cffff
>> [CPU1]
>> [cpu1]
>> [CPU2]
>> [cpu2]
>> [CPU3]
>> [    0.000000] Detected 3 available secondary CPU(s)
>> cp[    0.000000] Built 1 zonelists in Zone order, mobility grouping  
>> on.
>> Total pages: 250120
>> [    0.000000] Kernel command line: root=/dev/nfs ip=any
>> nfsroot=192.168.1.7:/ho
>> me/mason/debian-root
>> [    0.000000] Primary instruction cache 32kB, VIVT, 4-way,  
>> linesize 32
>> bytes.
>> [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases,
>> linesize 32 byt
>> es
>> [    0.000000]
>> NR_IRQS:128
>> [    0.000000] PID hash table entries: 4096 (order: 12, 32768
>> bytes)
>> [    0.000000] Console: colour dummy device
>> 80x25
>> [    0.000000] console handover: boot [early0] -> real
>> [tty0]
>>
>>
>>>
>>> You can find the kernel packages at
>>> http://people.debian.org/~tbm/mips/kernel/r13723/
>>>
>>> --
>>> Martin Michlmayr
>>> http://www.cyrius.com/
>>>
>>>
>
> --
> Martin Michlmayr
> http://www.cyrius.com/
>
>
> --
> To UNSUBSCRIBE, email to debian-mips-REQUEST@...
> with a subject of "unsubscribe". Trouble? Contact listmaster@...
>

--
To UNSUBSCRIBE, email to debian-mips-REQUEST@...
with a subject of "unsubscribe". Trouble? Contact listmaster@...