MS USB mouse does not work

[Dan Langille-3]

I'm running FreeBSD 7.2-STABLE from Tue May 26.

I have an MS keyboard and mouse, both of which are wireless and
operate through the same USB transceiver.  The keyboard works.  The
mouse does not.

>From /var/run/dmesg.boot:

ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
rev 2.00/2.50, addr 3> on uhub7
kbd2 at ukbd0
uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
rev 2.00/2.50, addr 3> on uhub7

I see nothing related to the mouse.  Any ideas.  It's a really nice
mouse, otherwise.  ;)

Is there anything I can run to gather more information?

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Tue May 26 14:09:07 EDT 2009
    dan@...:/usr/obj/usr/src/sys/DTM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2992.14-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2097774592 (2000 MB)
avail memory  = 2022559744 (1928 MB)
ACPI APIC Table: <DELL   B9K    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=1024304kB.
acpi0: <DELL B9K    > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on
pci1
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port
0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff
irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xecc0-0xecdf
mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0
on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:23:ae:78:ae:a8
uhci0: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 17 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff
irq 22 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: wrong number of companions (3 != 2)
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
hdac0: <Intel 82801I High Definition Audio Controller> mem
0xfebdc000-0xfebdffff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci2: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 23 at
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 17 at
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at
device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff980800-0xff980bff
irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on uhub6
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
rev 2.00/2.50, addr 3> on uhub7
kbd2 at ukbd0
uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
rev 2.00/2.50, addr 3> on uhub7
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf
mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI Version 01.20 controller with 6 ports detected
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 2> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 3> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 4> on atapci1
ata8: port not implemented
ata8: [ITHREAD]
ata9: <ATA channel 5> on atapci1
ata9: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xcf000-0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on uhub4
kbd3 at ukbd1
Timecounters tick every 1.000 msec
ad8: 152587MB <SAMSUNG HE160HJ JF800-24> at ata4-master SATA300
acd0: DVDROM <HL-DT-STDVD-ROM DH10N/0D08> at ata5-master SATA150
ad14: 152587MB <Seagate ST3160828AS 8.04> at ata7-master SATA300
ad18: 152587MB <WDC WD1601ABYS-18C0A0 06.06H05> at ata9-master SATA300
hdac0: HDA Codec #0: Analog Devices AD1984
pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1984 PCM #1 Analog> at cad 0 nid 1 on hdac0
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
GEOM_LABEL: Label for provider ad18s1 is msdosfs/DellUtility.
GEOM_LABEL: Label for provider ad18s2 is ntfs/OS.
GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
Trying to mount root from ufs:/dev/mirror/gm0s1a
GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.
GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.

--
Dan Langille
myYearbook.com
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Dan Langille-3]

bump

On Wed, Jun 10, 2009 at 2:18 PM, Dan Langille<dlangille@...> wrote:

> I'm running FreeBSD 7.2-STABLE from Tue May 26.
>
> I have an MS keyboard and mouse, both of which are wireless and
> operate through the same USB transceiver.  The keyboard works.  The
> mouse does not.
>
> From /var/run/dmesg.boot:
>
> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> kbd2 at ukbd0
> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
>
> I see nothing related to the mouse.  Any ideas.  It's a really nice
> mouse, otherwise.  ;)
>
> Is there anything I can run to gather more information?
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.2-STABLE #0: Tue May 26 14:09:07 EDT 2009
>    dan@...:/usr/obj/usr/src/sys/DTM
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2992.14-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  Cores per package: 2
> usable memory = 2097774592 (2000 MB)
> avail memory  = 2022559744 (1928 MB)
> ACPI APIC Table: <DELL   B9K    >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> lapic0: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> kqemu version 0x00010300
> kqemu: KQEMU installed, max_locked_mem=1024304kB.
> acpi0: <DELL B9K    > on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
> 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on
> pci1
> pci0: <simple comms> at device 3.0 (no driver attached)
> atapci0: <Intel ATA controller> port
> 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff
> irq 18 at device 3.2 on pci0
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> pci0: <simple comms, UART> at device 3.3 (no driver attached)
> em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xecc0-0xecdf
> mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0
> on pci0
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:23:ae:78:ae:a8
> uhci0: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 16 at
> device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 17 at
> device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff
> irq 22 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb2: EHCI version 1.0
> usb2: wrong number of companions (3 != 2)
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
> uhub2: 6 ports with 6 removable, self powered
> hdac0: <Intel 82801I High Definition Audio Controller> mem
> 0xfebdc000-0xfebdffff irq 16 at device 27.0 on pci0
> hdac0: HDA Driver Revision: 20090329_0131
> hdac0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> uhci2: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 23 at
> device 29.0 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci2
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 17 at
> device 29.1 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at
> device 29.2 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff980800-0xff980bff
> irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb6: EHCI version 1.0
> usb6: companion controllers, 2 ports each: usb3 usb4 usb5
> usb6: <EHCI (generic) USB 2.0 controller> on ehci1
> usb6: USB revision 2.0
> uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
> uhub6: 6 ports with 6 removable, self powered
> uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on uhub6
> uhub7: multiple transaction translators
> uhub7: 4 ports with 4 removable, self powered
> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> kbd2 at ukbd0
> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH9 SATA300 controller> port
> 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf
> mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
> atapci1: [ITHREAD]
> atapci1: AHCI called from vendor specific driver
> atapci1: AHCI Version 01.20 controller with 6 ports detected
> ata4: <ATA channel 0> on atapci1
> ata4: [ITHREAD]
> ata5: <ATA channel 1> on atapci1
> ata5: [ITHREAD]
> ata6: <ATA channel 2> on atapci1
> ata6: [ITHREAD]
> ata7: <ATA channel 3> on atapci1
> ata7: [ITHREAD]
> ata8: <ATA channel 4> on atapci1
> ata8: port not implemented
> ata8: [ITHREAD]
> ata9: <ATA channel 5> on atapci1
> ata9: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xcefff,0xcf000-0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on
> isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on uhub4
> kbd3 at ukbd1
> Timecounters tick every 1.000 msec
> ad8: 152587MB <SAMSUNG HE160HJ JF800-24> at ata4-master SATA300
> acd0: DVDROM <HL-DT-STDVD-ROM DH10N/0D08> at ata5-master SATA150
> ad14: 152587MB <Seagate ST3160828AS 8.04> at ata7-master SATA300
> ad18: 152587MB <WDC WD1601ABYS-18C0A0 06.06H05> at ata9-master SATA300
> hdac0: HDA Codec #0: Analog Devices AD1984
> pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
> pcm1: <HDA Analog Devices AD1984 PCM #1 Analog> at cad 0 nid 1 on hdac0
> lapic1: Forcing LINT1 to edge trigger
> SMP: AP CPU #1 Launched!
> GEOM_MIRROR: Device mirror/gm0 launched (2/2).
> GEOM_LABEL: Label for provider ad18s1 is msdosfs/DellUtility.
> GEOM_LABEL: Label for provider ad18s2 is ntfs/OS.
> GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
> GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
> GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
> GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
> Trying to mount root from ufs:/dev/mirror/gm0s1a
> GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
> GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
> GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
> GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
> GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
> GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
> GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
> GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.
>
> --
> Dan Langille
> myYearbook.com
>

--
Dan Langille
myYearbook.com
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Dan Langille-3]

bump

On Wed, Jun 10, 2009 at 2:18 PM, Dan Langille <dlangille@...>wrote:

> I'm running FreeBSD 7.2-STABLE from Tue May 26.
>
> I have an MS keyboard and mouse, both of which are wireless and
> operate through the same USB transceiver.  The keyboard works.  The
> mouse does not.
>
> From /var/run/dmesg.boot:
>
> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> kbd2 at ukbd0
> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
>
> I see nothing related to the mouse.  Any ideas.  It's a really nice
> mouse, otherwise.  ;)
>
> Is there anything I can run to gather more information?
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.2-STABLE #0: Tue May 26 14:09:07 EDT 2009
>    dan@...:/usr/obj/usr/src/sys/DTM
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2992.14-MHz K8-class
> CPU)
>  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
>
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
>  Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  Cores per package: 2
> usable memory = 2097774592 (2000 MB)
> avail memory  = 2022559744 (1928 MB)
> ACPI APIC Table: <DELL   B9K    >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> lapic0: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> kqemu version 0x00010300
> kqemu: KQEMU installed, max_locked_mem=1024304kB.
> acpi0: <DELL B9K    > on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
> 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on
> pci1
> pci0: <simple comms> at device 3.0 (no driver attached)
> atapci0: <Intel ATA controller> port
> 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff
> irq 18 at device 3.2 on pci0
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> pci0: <simple comms, UART> at device 3.3 (no driver attached)
> em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xecc0-0xecdf
> mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0
> on pci0
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:23:ae:78:ae:a8
> uhci0: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 16 at
> device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 17 at
> device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff
> irq 22 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb2: EHCI version 1.0
> usb2: wrong number of companions (3 != 2)
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
> uhub2: 6 ports with 6 removable, self powered
> hdac0: <Intel 82801I High Definition Audio Controller> mem
> 0xfebdc000-0xfebdffff irq 16 at device 27.0 on pci0
> hdac0: HDA Driver Revision: 20090329_0131
> hdac0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> uhci2: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 23 at
> device 29.0 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci2
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 17 at
> device 29.1 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at
> device 29.2 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff980800-0xff980bff
> irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb6: EHCI version 1.0
> usb6: companion controllers, 2 ports each: usb3 usb4 usb5
> usb6: <EHCI (generic) USB 2.0 controller> on ehci1
> usb6: USB revision 2.0
> uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
> uhub6: 6 ports with 6 removable, self powered
> uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on
> uhub6
> uhub7: multiple transaction translators
> uhub7: 4 ports with 4 removable, self powered
> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> kbd2 at ukbd0
> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> rev 2.00/2.50, addr 3> on uhub7
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH9 SATA300 controller> port
> 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf
> mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
> atapci1: [ITHREAD]
> atapci1: AHCI called from vendor specific driver
> atapci1: AHCI Version 01.20 controller with 6 ports detected
> ata4: <ATA channel 0> on atapci1
> ata4: [ITHREAD]
> ata5: <ATA channel 1> on atapci1
> ata5: [ITHREAD]
> ata6: <ATA channel 2> on atapci1
> ata6: [ITHREAD]
> ata7: <ATA channel 3> on atapci1
> ata7: [ITHREAD]
> ata8: <ATA channel 4> on atapci1
> ata8: port not implemented
> ata8: [ITHREAD]
> ata9: <ATA channel 5> on atapci1
> ata9: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio0: [FILTER]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xcefff,0xcf000-0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on
> isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on uhub4
> kbd3 at ukbd1
> Timecounters tick every 1.000 msec
> ad8: 152587MB <SAMSUNG HE160HJ JF800-24> at ata4-master SATA300
> acd0: DVDROM <HL-DT-STDVD-ROM DH10N/0D08> at ata5-master SATA150
> ad14: 152587MB <Seagate ST3160828AS 8.04> at ata7-master SATA300
> ad18: 152587MB <WDC WD1601ABYS-18C0A0 06.06H05> at ata9-master SATA300
> hdac0: HDA Codec #0: Analog Devices AD1984
> pcm0: <HDA Analog Devices AD1984 PCM #0 Analog> at cad 0 nid 1 on hdac0
> pcm1: <HDA Analog Devices AD1984 PCM #1 Analog> at cad 0 nid 1 on hdac0
> lapic1: Forcing LINT1 to edge trigger
> SMP: AP CPU #1 Launched!
> GEOM_MIRROR: Device mirror/gm0 launched (2/2).
> GEOM_LABEL: Label for provider ad18s1 is msdosfs/DellUtility.
> GEOM_LABEL: Label for provider ad18s2 is ntfs/OS.
> GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
> GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
> GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
> GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
> Trying to mount root from ufs:/dev/mirror/gm0s1a
> GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1a is ufsid/49db8904c3603ff2.
> GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1e is ufsid/49db89049055faa1.
> GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1f is ufsid/49db8904754be6b8.
> GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.
> GEOM_LABEL: Label for provider mirror/gm0s1d is ufsid/49db890b18be1fd1.
> GEOM_LABEL: Label ufsid/49db8904c3603ff2 removed.
> GEOM_LABEL: Label ufsid/49db89049055faa1 removed.
> GEOM_LABEL: Label ufsid/49db8904754be6b8 removed.
> GEOM_LABEL: Label ufsid/49db890b18be1fd1 removed.
>
> --
> Dan Langille
> myYearbook.com
>

--
Dan Langille
myYearbook.com
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Paul B Mahol]

On 10/21/09, Dan Langille <dlangille@...> wrote:

> bump
>
> On Wed, Jun 10, 2009 at 2:18 PM, Dan Langille
> <dlangille@...>wrote:
>
>> I'm running FreeBSD 7.2-STABLE from Tue May 26.
>>
>> I have an MS keyboard and mouse, both of which are wireless and
>> operate through the same USB transceiver.  The keyboard works.  The
>> mouse does not.
>>
>> From /var/run/dmesg.boot:
>>
>> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
>> rev 2.00/2.50, addr 3> on uhub7
>> kbd2 at ukbd0
>> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
>> rev 2.00/2.50, addr 3> on uhub7
>>
>> I see nothing related to the mouse.  Any ideas.  It's a really nice
>> mouse, otherwise.  ;)

Try with 8.0, maybe something improved ...
If not, than the only option is to write mouse driver, if this particular mouse
doesnt need some kind of quirk ....
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Rashid N. Achilov-3]

On Thursday 22 October 2009, Paul B Mahol wrote:
>
> Try with 8.0, maybe something improved ...
> If not, than the only option is to write mouse driver, if this particular
mouse
> doesnt need some kind of quirk ....

This problem exist since 5-branch. At 2005 I had have Genius Optical TwinTouch
wireless pair - keyboard+mouse, keyboard works, mouse not. And still - ANY
pair, when keyboard and mouse share same receiver will works so - keyboard
yes, mouse no.

Still awaiting 8.0-RELEASE to try their USB
--
   With Best Regards.
   Rashid N. Achilov (RNA1-RIPE), JID: citycat4@...
   OOO "ACK" telecommunications administrator, e-mail: achilov-rn [at] askd.ru
   PGP: 83 CD E2 A7 37 4A D5 81 D6 D6 52 BF C9 2F 85 AF 97 BE CB 0A
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Dan Langille-3]

On Wed, Oct 21, 2009 at 2:10 PM, Paul B Mahol <onemda@...> wrote:

> On 10/21/09, Dan Langille <dlangille@...> wrote:
> > bump
> >
> > On Wed, Jun 10, 2009 at 2:18 PM, Dan Langille
> > <dlangille@...>wrote:
> >
> >> I'm running FreeBSD 7.2-STABLE from Tue May 26.
> >>
> >> I have an MS keyboard and mouse, both of which are wireless and
> >> operate through the same USB transceiver.  The keyboard works.  The
> >> mouse does not.
> >>
> >> From /var/run/dmesg.boot:
> >>
> >> ukbd0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> >> rev 2.00/2.50, addr 3> on uhub7
> >> kbd2 at ukbd0
> >> uhid0: <Microsoft Microsoft\M-. 2.4GHz Transceiver V1.0, class 0/0,
> >> rev 2.00/2.50, addr 3> on uhub7
> >>
> >> I see nothing related to the mouse.  Any ideas.  It's a really nice
> >> mouse, otherwise.  ;)
>
> Try with 8.0, maybe something improved ...
> If not, than the only option is to write mouse driver, if this particular
> mouse
> doesnt need some kind of quirk ....
>

FYI, I upgraded to FreeBSD 8.0-RC2.

Mouse and keyboard both work.  :)

--
Dan Langille
myYearbook.com
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[Rashid N. Achilov-3]

On Monday 02 November 2009, Dan Langille wrote:

> > Try with 8.0, maybe something improved ...
> > If not, than the only option is to write mouse driver, if this particular
> > mouse
> > doesnt need some kind of quirk ....
> >
>
> FYI, I upgraded to FreeBSD 8.0-RC2.
>
> Mouse and keyboard both work.  :)

Awaiting at least 8.0-RELEASE (but preferrable 8.1-RELEASE - "dot zero" still
will buggy). But this is good news. Probably, my Genius Optical Value and
Microsoft 5000 twins will work :-)
--
   With Best Regards.
   Rashid N. Achilov (RNA1-RIPE), JID: citycat4@...
   OOO "ACK" telecommunications administrator, e-mail: achilov-rn [at] askd.ru
   PGP: 83 CD E2 A7 37 4A D5 81 D6 D6 52 BF C9 2F 85 AF 97 BE CB 0A
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."