My problem of I/O port

[Ding ying]

Hello,everyone:
         I have built a parport server based on dde, and test it through on fiasco. Now I want to booting it together with l4linux, but there are conflict occured.
         And I have some questions to ask:
        1. I used the l4linux-2.6.30 kernel, now to booting it besides fiasco default config, there is
                [ *] Enable I/O port protection
            feature must need, isn't it?
            It not needed in l4linux-2.6.23 kernel or earlier.
        2. Will this feature prevent the other server to access to the io port?
            I seems meeting this problem, my parport server(#b) want to access the port 077a, but system say the owner is #a(l4io), even I set the parport priority higher than l4io, it also the same problem. the last error message is like follow:
           ............................... 
           server  | <6>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
           server  | <6>parport0: irq 7 detected
           ROOT: Cannot send port 077a to task #0b, owner is #a
           ROOT: task B.00 at 01804299 is trying to get I/O port 077a allocated by task 0b.
           ................................
         How can I do could make the parport server run together with the l4linux, or to make it could access the port it needed?
         Any help is precious.

         Best Regards!
         ding

_______________________________________________
l4-hackers mailing list
l4-hackers@...
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers

[Björn Döbel]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

>          And I have some questions to ask:
>         1. I used the l4linux-2.6.30 kernel, now to booting it besides
> fiasco default config, there is
>                 [ *] Enable I/O port protection
>             feature must need, isn't it?
>             It not needed in l4linux-2.6.23 kernel or earlier.

This is not a Linux feature, but one from the Fiasco kernel. You should
have it enabled by default. It basically prevents applications from
accessing I/O ports unless they are the first to access these.
Otherwise, your application needs to get them mapped (using an I/O
flexpage) from an application that has access to the IO/ ports.

>         2. Will this feature prevent the other server to access to the io
> port?
>             I seems meeting this problem, my parport server(#b) want to
> access the port 077a, but system say the owner is #a(l4io), even I set the
> parport priority higher than l4io, it also the same problem. the last error
> message is like follow:
>            ...............................
>            server  | <6>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>            server  | <6>parport0: irq 7 detected
>            ROOT: Cannot send port 077a to task #0b, owner is #a
>            ROOT: task B.00 at 01804299 is trying to get I/O port 077a
> allocated by task 0b.

What are tasks A and B? Assuming A is your parport server and B is L4IO,
then you need to call l4io_request_region() to retrieve the ports you
want to access from L4IO. As your parport server is DDE-based you can
also do this using Linux' means (request_region()).

>            ................................
>          How can I do could make the parport server run together with the
> l4linux, or to make it could access the port it needed?

I don't see where L4Linux comes into play here?

Bjoern
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkqePvUACgkQP5ijxgQLUNluNwCdHSNhFfB17Z7b2MjEO6YkLrg9
Lr8An20HUfWOHbZXLJnQtJ3GnKzzOyRF
=CULK
-----END PGP SIGNATURE-----


_______________________________________________
l4-hackers mailing list
l4-hackers@...
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers