NTLM

[Paul Ryszka]

Hi,

I was setting up NTLM auth against AD and it works well however I wanted
to add another server sections in the config and that was working ok too
up to the point when somebody wants to do mschap authentication against
something else than AD
I followed the recommendations and add the following:
        with_ntdomain_hack = yes
        ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--username={mschap:User-Name:-None}
--domain={mschap:NT-Domain:-WEBANGEL} --challenge={mschap:Challenge:-00}
--nt-response=%{mschap:NT-Response:-00}"

to the module section in mschap but now it seams that it cannot do any
other backends
I have sql engine returning ok before mschap
and than mschap returning reject and whole request is rejected.
I attach log of activity from radius -X
I would like to have two separate server sections
one authenticating against AD and the other against SQL and I would like
the end-client to be able to use MSCHAPv2 to use both.

Thank you in advance for your help.

Regards
Paul



[radius.log]

---

FreeRADIUS Version 2.1.7, for host i386-redhat-linux-gnu, built on Sep 18 2009 at 10:59:17
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/ntlm
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/mssql.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/ntlm
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/mssql
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        allow_core_dumps = no
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 0
        reject_delay = 0
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        shortname = "localhost"
        nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
        ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{mschap:NT-Domain:-WEBANGEL} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        CA_file = "/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/raddb/certs/dh"
        random_file = "/etc/raddb/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/etc/raddb/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/etc/raddb/users"
        acctusersfile = "/etc/raddb/acct_users"
        preproxy_usersfile = "/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/etc/raddb/huntgroups"
        hints = "/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating detail
  detail {
        detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Checking authorize {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_sql
 Module: Instantiating sql
  sql {
        driver = "rlm_sql_unixodbc"
        server = "mssqlDSN"
        port = ""
        login = "sa"
        password = "Piccolo1"
        radius_db = "radius"
        read_groups = yes
        sqltrace = yes
        sqltracefile = "/var/log/radius/sqltrace.sql"
        readclients = no
        deletestalesessions = yes
        num_sql_socks = 5
        lifetime = 0
        max_queries = 0
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        nas_query = "SELECT id,nasname,shortname,type,secret FROM nas"
        authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = ""
        authorize_group_reply_query = ""
        accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
        accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime = 0"
        accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
        accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
        accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
        accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
        accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
        connect_failure_retry_delay = 60
        simul_count_query = ""
        simul_verify_query = ""
        postauth_query = ""
        safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_unixodbc (module rlm_sql_unixodbc) loaded and linked
rlm_sql (sql): Attempting to connect to sa@mssqlDSN:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_unixodbc #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_unixodbc #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_unixodbc #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_unixodbc #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_unixodbc #4
rlm_sql (sql): Connected new DB handle, #4
 Module: Checking preacct {...} for more modules to load
 Module: Checking accounting {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "auth"
        ipaddr = *
        port = 1645
}
listen {
        type = "acct"
        ipaddr = *
        port = 1646
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address * port 1645
Listening on accounting address * port 1646
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 54985, id=93, length=55
        User-Name = "Paul"
        EAP-Message = 0x02000009015061756c
        Message-Authenticator = 0xc74eb82b9e2dfd4cd513abd9c91869cd
+- entering group authorize {...}
++[chap] returns noop
[suffix] No '@' in User-Name = "Paul", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> Paul
[sql] sql_set_user escaped user --> 'Paul'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
[sql] User found in radcheck table
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 93 to 127.0.0.1 port 54985
        EAP-Message = 0x010100160410cca24d6a98c8ae139fa2182c92df288e
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x8332ff688333fb0ee8ea809902f55234
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 54985, id=94, length=70
        User-Name = "Paul"
        State = 0x8332ff688333fb0ee8ea809902f55234
        EAP-Message = 0x02010006031a
        Message-Authenticator = 0xbe558f7937c431638eb6eb3d52c7a971
+- entering group authorize {...}
++[chap] returns noop
[suffix] No '@' in User-Name = "Paul", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> Paul
[sql] sql_set_user escaped user --> 'Paul'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
[sql] User found in radcheck table
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/mschapv2
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 94 to 127.0.0.1 port 54985
        EAP-Message = 0x0102001e1a01020019109926a44771ed4878e86a5bb8f8683cd95061756c
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x8332ff688230e50ee8ea809902f55234
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 54985, id=95, length=123
        User-Name = "Paul"
        State = 0x8332ff688230e50ee8ea809902f55234
        EAP-Message = 0x0202003b1a0203003b3178b5dbf3aa3e4168d3bf215fa3b07bf600000000000000003be699bc4bc8e01064060bc62834957beb912bb65d4cce5200
        Message-Authenticator = 0x451ff47b928e8315968ad6be9f70620e
+- entering group authorize {...}
++[chap] returns noop
[suffix] No '@' in User-Name = "Paul", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 59
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> Paul
[sql] sql_set_user escaped user --> 'Paul'
rlm_sql (sql): Reserving sql socket id: 2
[sql] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'Paul' ORDER BY id
[sql] User found in radcheck table
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] Told to do MS-CHAPv2 for Paul with NT-Password
[mschap] expand: --username=%{mschap:User-Name:-None} -> --username=Paul
[mschap] No NT-Domain was found in the User-Name.
[mschap] expand: --domain=%{mschap:NT-Domain:-WEBANGEL} -> --domain=WEBANGEL
[mschap]  mschap2: 99
[mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=1d35ea407648cf60
[mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=3be699bc4bc8e01064060bc62834957beb912bb65d4cce52
Exec-Program output: Logon failure (0xc000006d)
Exec-Program-Wait: plaintext: Logon failure (0xc000006d)
Exec-Program: returned: 1
[mschap] External script failed.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> Paul
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Sending Access-Reject of id 95 to 127.0.0.1 port 54985
        EAP-Message = 0x04020004
        Message-Authenticator = 0x00000000000000000000000000000000
Finished request 2.
Going to the next request
Waking up in 4.8 seconds.

---

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

[tnt-5]

> I was setting up NTLM auth against AD and it works well however I wanted
> to add another server sections in the config and that was working ok too
> up to the point when somebody wants to do mschap authentication against
> something else than AD
> I followed the recommendations and add the following:
>         with_ntdomain_hack = yes
>         ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --username={mschap:User-Name:-None}
> --domain={mschap:NT-Domain:-WEBANGEL} --challenge={mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}"
>
> to the module section in mschap but now it seams that it cannot do any
> other backends
> I have sql engine returning ok before mschap
> and than mschap returning reject and whole request is rejected.
> I attach log of activity from radius -X
> I would like to have two separate server sections
> one authenticating against AD and the other against SQL and I would like
> the end-client to be able to use MSCHAPv2 to use both.

http://wiki.freeradius.org/Combining_authentication_of_AD_accounts_(ntlm_auth)_with_accounts_stored_elsewhere

Ivan Kalik
Kalik Informatika ISP

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

[Paul Ryszka]

Thank you!!!
On Wed, 2009-11-04 at 12:17 +0000, Ivan Kalik wrote:

> > I was setting up NTLM auth against AD and it works well however I wanted
> > to add another server sections in the config and that was working ok too
> > up to the point when somebody wants to do mschap authentication against
> > something else than AD
> > I followed the recommendations and add the following:
> >         with_ntdomain_hack = yes
> >         ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> > --username={mschap:User-Name:-None}
> > --domain={mschap:NT-Domain:-WEBANGEL} --challenge={mschap:Challenge:-00}
> > --nt-response=%{mschap:NT-Response:-00}"
> >
> > to the module section in mschap but now it seams that it cannot do any
> > other backends
> > I have sql engine returning ok before mschap
> > and than mschap returning reject and whole request is rejected.
> > I attach log of activity from radius -X
> > I would like to have two separate server sections
> > one authenticating against AD and the other against SQL and I would like
> > the end-client to be able to use MSCHAPv2 to use both.
>
> http://wiki.freeradius.org/Combining_authentication_of_AD_accounts_(ntlm_auth)_with_accounts_stored_elsewhere
>
> Ivan Kalik
> Kalik Informatika ISP
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html