« Return to Thread: Newbie question ... fallback mounts

Newbie question ... fallback mounts

by Mike Allen-2 :: Rate this Message:

Reply to Author | View in Thread

Attached is my config file.  The purpose is to interrupt my regular
stream sith a station (stream) ID once per hour (time synchronized
externally).

I use ezstream to play the pre-recorded stream ID.

I never hear the stream ID while listening to the stream.  (There is a
10 second break in the stream once per hour)  What am I doing wrong?  
Thanks in advance.

Mike



<icecast>
    <limits>
        <clients>100</clients>
        <sources>2</sources>
        <threadpool>5</threadpool>
        <queue-size>524288</queue-size>
        <client-timeout>30</client-timeout>
        <header-timeout>15</header-timeout>
        <source-timeout>10</source-timeout>
        <!-- If enabled, this will provide a burst of data when a client
             first connects, thereby significantly reducing the startup
             time for listeners that do substantial buffering. However,
             it also significantly increases latency between the source
             client and listening client.  For low-latency setups, you
             might want to disable this. -->
        <burst-on-connect>0</burst-on-connect>
        <!-- same as burst-on-connect, but this allows for being more
             specific on how much to burst. Most people won't need to
             change from the default 64k. Applies to all mountpoints  -->
        <burst-size>65535</burst-size>
    </limits>

    <authentication>
        <!-- Sources log in with username 'source' -->
        <source-password>password</source-password>
        <!-- Relays log in username 'relay' -->
        <relay-password>password</relay-password>

        <!-- Admin logs in with the username given below -->
        <admin-user>admin</admin-user>
        <admin-password>password</admin-password>
    </authentication>

<!--     set the mountpoint for a shoutcast source to use, the default if not
         specified is /stream but you can change it here if an alternative is
         wanted or an extension is required -->
    <shoutcast-mount>/stream</shoutcast-mount>

    <!-- Uncomment this if you want directory listings -->
    <!--
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
    </directory>
     -->

    <!-- This is the hostname other people will use to connect to your server.
    It affects mainly the urls generated by Icecast for playlists and yp
    listings. -->
    <hostname>famrad.familyradio.org</hostname>

    <!-- You may have multiple <listener> elements -->
    <listen-socket>
        <port>8100</port>
        <bind-address>209.10.202.162</bind-address>
        <shoutcast-mount>/stream</shoutcast-mount>
    </listen-socket>
 
    <listen-socket>
        <port>8100</port>
    </listen-socket>

    <listen-socket>
        <port>8150</port>
        <mount>/stationid</mount>
    </listen-socket>

    <!--
    <master-server>209.10.202.162</master-server>
    <master-server-port>8100</master-server-port>
    <master-update-interval>120</master-update-interval>
    <master-password>password</master-password>
    -->
<!-- setting this makes all relays on-demand unless overridden, this is
         useful for master relays which do not have <relay> definitions here.
         The default is 0 -->
    <relays-on-demand>1</relays-on-demand>
-->  
   
    <relay>
        <server>209.10.202.162</server>
        <port>8100</port>
        <mount>/</mount>
        <local-mount></local-mount>
        <on-demand>0</on-demand>

        <relay-shoutcast-metadata>1</relay-shoutcast-metadata>
    </relay>

    <!-- Only define a <mount> section if you want to use advanced options,
         like alternative usernames or passwords -->
    <mount>
        <mount-name>/stationid</mount-name>

        <max-listeners>100</max-listeners>
        <dump-file>/tmp/dump-example1.ogg</dump-file>
        <burst-size>65536</burst-size>
        <fallback-mount>/stream</fallback-mount>
        <fallback-override>1</fallback-override>
    </mount>
    <mount>
        <mount-name>/stream</mount-name>
    </mount>

    <fileserve>1</fileserve>

    <paths>
        <!-- basedir is only used if chroot is enabled -->
        <basedir>/usr/local/share/icecast</basedir>

        <!-- Note that if <chroot> is turned on below, these paths must both
             be relative to the new root, not the original root -->
        <logdir>/usr/local/var/log/icecast</logdir>
        <webroot>/usr/local/share/icecast/web</webroot>
        <adminroot>/usr/local/share/icecast/admin</adminroot>
        <!-- <pidfile>/usr/local/share/icecast/icecast.pid</pidfile> -->

        <!-- Aliases: treat requests for 'source' path as being for 'dest' path
             May be made specific to a port or bound address using the "port"
             and "bind-address" attributes.
          -->
        <!--
        <alias source="/foo" dest="/bar"/>
          -->
       <!-- Aliases: can also be used for simple redirections as well,
             this example will redirect all requests for http://server:port/ to
             the status page
          -->
        <alias source="/stream" dest="/status.xsl"/>
    </paths>

    <logging>
        <accesslog>access.log</accesslog>
        <errorlog>error.log</errorlog>
        <!-- <playlistlog>playlist.log</playlistlog> -->
      <loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
      <logsize>10000</logsize> <!-- Max size of a logfile -->
        <!-- If logarchive is enabled (1), then when logsize is reached
             the logfile will be moved to [error|access|playlist].log.DATESTAMP,
             otherwise it will be moved to [error|access|playlist].log.old.
             Default is non-archive mode (i.e. overwrite)
        -->
        <!-- <logarchive>1</logarchive> -->
    </logging>

    <security>
        <chroot>0</chroot>
        <!--
        <changeowner>
            <user>nobody</user>
            <group>nogroup</group>
        </changeowner>
        -->
    </security>
</icecast>

_______________________________________________
Icecast mailing list
Icecast@...
http://lists.xiph.org/mailman/listinfo/icecast

 « Return to Thread: Newbie question ... fallback mounts