OpenBSD intel em driver problem
|
View:
New views
6 Messages
—
Rating Filter:
Alert me
|
 |
OpenBSD intel em driver problem
by Devrim Seral-2
::
Rate this Message:
Hi,
I have big trouble with Intel em NIC both OpenBSD latest stable (4.3) and snapshot ( 2 July 4.4 version) version. My investigations showed that this problem is related to em driver. This problem appear when i tried to use dual port Intel Gigabit NIC with OpenBSD(4.3 and Snapshot) . However this Dual port NIC is working well with Linux Operating system at same machine. So there are no any HW related problem. I am attached dmesg, ifconfig, netstat, arp and vmstat outputs in compressed bug.tgz file. Both 4.3 and Snapshot versions give following errors: em0: watchdog timeout -- reseting em0: watchdog timeout -- reseting em0: watchdog timeout -- reseting em0: watchdog timeout -- reseting or em1: watchdog timeout -- reseting ............ When i sniffed packets interface send arp requests and sending packets arrived to target host. But reply packets or new packets never got by em interfaces. My PC have AMD Athlon 64 X2 4000+ , 2GB Dual Channel Ram, Samsung SATA 300GB disk, Motherboard Gigabyte Nvida MCP61 chipset onboard Video and Lan. Additionally have Intel Pro 1000/PT Dual port Adapter & Realtek chipstet 100Mb NIC Regards. Devrim Seral [demime 1.01d removed an attachment of type application/x-gzip which had a name of bug.tgz] |
|
|
|
|
|
Re: OpenBSD intel em driver problem
by Stuart Henderson
::
Rate this Message:
On 2008/07/04 00:49, Devrim Seral wrote:
> Ok i paste it.. At the boot loader prompt, "boot -c", then at the UKC> prompt, "disable apm" and "quit". This will use ACPI in preference which might help the OS work out the interrupt routing on your motherboard. If it helps, when the system is running you can use config(8) to save this setting (see the -e options). |
|
|
Re: OpenBSD intel em driver problem
by Devrim Seral-2
::
Rate this Message:
Hi,
Today i tried to made your suggestions but haven't sucess.. The problem continue.. I think this problem related to mobo Nvida Chipset. Because when i used same HDD and Intel/1000PT on different machine ( gigabyte Mobo with }ntel Q9600 CPU) em interfaces runing.. Do you have more suggestions? Thanks.. Regards. Devrim Seral On Fri, Jul 4, 2008 at 12:59 AM, Stuart Henderson <stu@...> wrote: > On 2008/07/04 00:49, Devrim Seral wrote: > > Ok i paste it.. > > At the boot loader prompt, "boot -c", then at the UKC> prompt, > "disable apm" and "quit". This will use ACPI in preference > which might help the OS work out the interrupt routing on your > motherboard. > > If it helps, when the system is running you can use config(8) > to save this setting (see the -e options). |
|
|
Re: OpenBSD intel em driver problem
by Can Erkin Acar-4
::
Rate this Message:
On Fri, Jul 4, 2008 at 8:23 AM, Devrim Seral <dseral@...> wrote:
> Hi, > Today i tried to made your suggestions but haven't sucess.. > The problem continue.. I think this problem related to mobo Nvida Chipset. Can you also send the dmesg output for the case you disabled apm? Thanks Can |
|
|
Re: OpenBSD intel em driver problem
by Devrim Seral-2
::
Rate this Message:
> Hi,
> Today i tried to made your suggestions but haven't sucess.. > The problem continue.. I think this problem related to mobo Nvida Chipset. >Can you also send the dmesg output for the case you disabled apm? >Thanks >Can Hi Can, I have attached dmesg output as follow.. Additionally kernel halt when tried to made network configuration (Perhaps while execute netstart script) When i am unplugged cable and start again its boot but when i plug again its halted again.. This ethernet card work without problem on intel Quad Core machine.. Regards.. Devrim OpenBSD 4.4-beta (GENERIC) #964: Tue Jul 1 20:51:26 MDT 2008 deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ ("AuthenticAMD" 686-class, 512KB L2 cache) 2.11 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16 real mem = 2079879168 (1983MB) avail mem = 2002837504 (1910MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/05/07, BIOS32 rev. 0 @ 0xfb0c0, SMBIOS rev. 2.4 @ 0xf0100 (41 entries) bios0: vendor Award Software International, Inc. version "F8" date 10/05/2007 bios0: Gigabyte Technology Co., Ltd. M61PM-S2 apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP SSDT HPET MCFG APIC acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) UAR1(S5) USB0(S3) USB2(S3) AZAD(S5) MMAC(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 25000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (HUB0) acpicpu0 at acpi0: PSS acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000! cpu0 at mainbus0 cpu0: PowerNow! K8 2110 MHz: speeds: 2100 2000 1800 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 iic0 at nviic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 iic1 at nviic0 iic1: addr 0x2e 00=00 01=00 02=80 03=00 04=a1 05=07 06=00 07=00 words 00=00ff 01=00ff 02=80ff 03=00ff 04=a1ff 05=07ff 06=00ff 07=00ff "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 5, version 1.0, legacy support ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 pci1 at ppb0 bus 1 azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: irq 11 azalia0: codec[s]: Realtek ALC883 audio0 at azalia0 pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S202N, SB01> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 ignored (disabled) nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: irq 5, address 00:1a:4d:7f:53:a0 rgephy0 at nfe0 phy 1: RTL8169S/8110S PHY, rev. 2 pciide1 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA pciide1: using irq 11 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD321KJ> wd0: 16-sector PIO, LBA48, 305244MB, 625140335 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide2 at pci0 dev 8 function 1 "NVIDIA MCP61 SATA" rev 0xa2: DMA pciide2: using irq 10 for native-PCI interrupt ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 10, address 00:15:17:78:87:7c em1 at pci2 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 11, address 00:15:17:78:87:7d vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-G1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8716F rev 0x00, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 biomask fd65 netmask fd65 ttymask ffff mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted OpenBSD 4.4-beta (GENERIC) #964: Tue Jul 1 20:51:26 MDT 2008 deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ ("AuthenticAMD" 686-class, 512KB L2 cache) 2.11 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16 real mem = 2079879168 (1983MB) avail mem = 2002837504 (1910MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/05/07, BIOS32 rev. 0 @ 0xfb0c0, SMBIOS rev. 2.4 @ 0xf0100 (41 entries) bios0: vendor Award Software International, Inc. version "F8" date 10/05/2007 bios0: Gigabyte Technology Co., Ltd. M61PM-S2 apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP SSDT HPET MCFG APIC acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) UAR1(S5) USB0(S3) USB2(S3) AZAD(S5) MMAC(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 25000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (HUB0) acpicpu0 at acpi0: PSS acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000! cpu0 at mainbus0 cpu0: PowerNow! K8 2110 MHz: speeds: 2100 2000 1800 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 iic0 at nviic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 iic1 at nviic0 iic1: addr 0x2e 00=00 01=00 02=80 03=00 04=a1 05=07 06=00 07=00 words 00=00ff 01=00ff 02=80ff 03=00ff 04=a1ff 05=07ff 06=00ff 07=00ff "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 5, version 1.0, legacy support ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 pci1 at ppb0 bus 1 azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: irq 11 azalia0: codec[s]: Realtek ALC883 audio0 at azalia0 pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S202N, SB01> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 ignored (disabled) nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: irq 5, address 00:1a:4d:7f:53:a0 rgephy0 at nfe0 phy 1: RTL8169S/8110S PHY, rev. 2 pciide1 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA pciide1: using irq 11 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD321KJ> wd0: 16-sector PIO, LBA48, 305244MB, 625140335 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide2 at pci0 dev 8 function 1 "NVIDIA MCP61 SATA" rev 0xa2: DMA pciide2: using irq 10 for native-PCI interrupt ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 10, address 00:15:17:78:87:7c em1 at pci2 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 11, address 00:15:17:78:87:7d vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-G1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8716F rev 0x00, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 biomask fd65 netmask fd65 ttymask ffff mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted |
| Free embeddable forum powered by Nabble | Forum Help |
