|
View:
New views
5 Messages
—
Rating Filter:
Alert me
|
|
|
OpenGL problem since I change my laptopHello,
I've a problem similar to the one discussed in thread "OpenGL Problems with openSUSE 11.1". The difference is that I don't manage to solve it. I tried fox-1.6.36 and fox-1.7.19 with GLX_VERSION_1_3 defined and not. fox-1.7.19 with GLX_VERSION_1_3 defined really produce an error, but other solutions do no complain. I compile fox-1.7.19 with debug enable, GLX_VERSION_1_3 undefined and run app with -tracelevel 151. Printed information shows that everything is ok, the best visual is chosen which seem to be a sane visual. Also glxgears and other apps using opengl work well. Please find attached snapshots of running gltest and glviewer. thanks for your help. Xavier here are some various info about my system: /var/log/Xorg.0.log X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.28-tuxonice-r10 i686 Current Operating System: Linux laptop 2.6.28-tuxonice-r10 #1 SMP Mon Jun 1 12:16:21 CEST 2009 i686 Build Date: 01 June 2009 12:58:47PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 1 15:29:21 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/misc/"). (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/misc/"). (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/lib/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled. (WW) Disabling Mouse0 (WW) Disabling Keyboard0 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x9a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/0, 0xe0000000/0, I/O @ 0x0000ef98/0 (--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6b00000/0 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "xtrap" (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so (II) Module xtrap: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DEC-XTRAP (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF6C00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): Output TV has no monitor section (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Output VGA connected (II) intel(0): Output LVDS connected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 disconnected (II) intel(0): Output TV disconnected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 1152x864 (II) intel(0): Output LVDS using initial mode 1152x864 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (470, 300) mm (**) intel(0): DPI set to (90, 142) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x30000120 to 0x38000120 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x08400b00 (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000236 (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000d0 to 0x000c00d0 (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104 (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200 (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200 (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1 (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359 (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022 (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344 (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415 (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607 (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001 (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087 (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140 (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024 (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198 (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283 (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141 (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x41002000 to 0x80000400 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 479744 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1918972 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf6c00000 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 36126720 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (WW) intel(0): drmDropMaster failed: Unknown error 4294967295 (II) intel(0): Disable render standby. (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x000000007e000000 physical ) (II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB) (II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled (II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled (II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB) (II) intel(0): 0x0d78b000: end of memory manager (II) intel(0): [drm] mapped front buffer at 0xe4020000, handle = 0xe4020000 (II) intel(0): [drm] mapped back buffer at 0xe3020000, handle = 0xe3020000 (II) intel(0): [drm] mapped depth buffer at 0xe2020000, handle = 0xe2020000 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 304 x 190 (II) config/hal: Adding input device DualPoint Stick (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) DualPoint Stick: always reports core events (**) DualPoint Stick: Device: "/dev/input/event9" (II) DualPoint Stick: Found 3 mouse buttons (II) DualPoint Stick: Found x and y relative axes (II) DualPoint Stick: Configuring as mouse (**) DualPoint Stick: YAxisMapping: buttons 4 and 5 (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE) (II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events (**) AlpsPS/2 ALPS DualPoint TouchPad: Device: "/dev/input/event10" (II) AlpsPS/2 ALPS DualPoint TouchPad: Found 3 mouse buttons (II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y relative axes (II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y absolute axes (II) AlpsPS/2 ALPS DualPoint TouchPad: Found absolute touchpad (II) AlpsPS/2 ALPS DualPoint TouchPad: Configuring as mouse (**) AlpsPS/2 ALPS DualPoint TouchPad: YAxisMapping: buttons 4 and 5 (**) AlpsPS/2 ALPS DualPoint TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: MOUSE) (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device No brand SP04-A1 (**) No brand SP04-A1: always reports core events (**) No brand SP04-A1: Device: "/dev/input/event8" (II) No brand SP04-A1: Found keys (II) No brand SP04-A1: Configuring as keyboard (II) XINPUT: Adding extended input device "No brand SP04-A1" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device SteelSeries ApS Ikari Laser (**) SteelSeries ApS Ikari Laser: always reports core events (**) SteelSeries ApS Ikari Laser: Device: "/dev/input/event7" (II) SteelSeries ApS Ikari Laser: Found 7 mouse buttons (II) SteelSeries ApS Ikari Laser: Found x and y relative axes (II) SteelSeries ApS Ikari Laser: Found keys (II) SteelSeries ApS Ikari Laser: Configuring as mouse (II) SteelSeries ApS Ikari Laser: Configuring as keyboard (**) SteelSeries ApS Ikari Laser: YAxisMapping: buttons 4 and 5 (**) SteelSeries ApS Ikari Laser: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "SteelSeries ApS Ikari Laser" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device LITEON Technology USB Multimedia Keyboard (**) LITEON Technology USB Multimedia Keyboard: always reports core events (**) LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event6" (II) LITEON Technology USB Multimedia Keyboard: Found keys (II) LITEON Technology USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device HID 413c:8158 (**) HID 413c:8158: always reports core events (**) HID 413c:8158: Device: "/dev/input/event5" (II) HID 413c:8158: Found 3 mouse buttons (II) HID 413c:8158: Found x and y relative axes (II) HID 413c:8158: Configuring as mouse (**) HID 413c:8158: YAxisMapping: buttons 4 and 5 (**) HID 413c:8158: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 413c:8158" (type: MOUSE) (II) config/hal: Adding input device HID 413c:8157 (**) HID 413c:8157: always reports core events (**) HID 413c:8157: Device: "/dev/input/event4" (II) HID 413c:8157: Found keys (II) HID 413c:8157: Configuring as keyboard (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "fr" (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 +hsync -vsync (55.7 kHz) (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 910 920 1387 +hsync -vsync (55.7 kHz) (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 +hsync -vsync (55.7 kHz) (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 910 920 1387 +hsync -vsync (55.7 kHz) (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 +hsync -vsync (55.7 kHz) (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 910 920 1387 +hsync -vsync (55.7 kHz) (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 +hsync -vsync (55.7 kHz) (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 910 920 1387 +hsync -vsync (55.7 kHz) (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): [drm] mapped front buffer at 0xe4020000, handle = 0x2c804000 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 +hsync -vsync (55.7 kHz) (II) intel(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 910 920 1387 +hsync -vsync (55.7 kHz) (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 596 (II) intel(0): EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz (II) intel(0): EDID vendor "LPL", prod id 320 exaCopyDirty: Pending damage region empty! glxinfo: name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap GLX version: 1.2 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.4 OpenGL shading language version string: 1.20 OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, GL_ARB_half_float_pixel, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_depth_bounds_test, GL_EXT_draw_range_elements, GL_EXT_framebuffer_object, GL_EXT_framebuffer_blit, GL_EXT_fog_coord, GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1, GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object, GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATI_fragment_shader, GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_program_debug, GL_MESA_resize_buffers, GL_MESA_texture_array, GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square, GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table, GL_SGI_texture_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays 3 GLX Visuals visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x76 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 36 GLXFBConfigs: visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x77 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x78 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x79 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x7a 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x7b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x7c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x7d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x7e 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x7f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x80 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x81 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x82 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x83 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x84 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x85 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x86 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x87 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x88 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x89 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x8a 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x8b 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x8e 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x8f 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x90 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x91 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x92 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x93 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x94 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x95 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x96 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x97 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x98 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x99 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x9a 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow ./gltest -tracelevel 151 (compiled with fox-1.7.19 and GLX_VERSION_1_3 undefined): FXApp::init FXApp::openDisplay: opening display. X Shared Images = 1 X Shared Pixmaps = 0 X RandR available FXWindow::FXWindow 0x87e3f48 0x87e4040->FXAccelTable::FXAccelTable FXWindow::FXWindow 0x87e4070 FXWindow::FXWindow 0x87e4110 FXWindow::FXWindow 0x87e41b0 parseHotKey(OpenGL Canvas Frame) = code=0000 mods=0000 FXWindow::FXWindow 0x87e42e0 FXWindow::FXWindow 0x87e4378 FXVisual::FXVisual 0x87e6020 FXGLVisual::FXGLVisual 0x87e6020 FXWindow::FXWindow 0x87e4418 FXWindow::FXWindow 0x87e4498 FXWindow::FXWindow 0x87e4550 parseHotKey(Button Frame) = code=0000 mods=0000 FXWindow::FXWindow 0x87e4650 FXWindow::FXWindow 0x87e4720 parseHotKey(&OpenGL Info) = code=006f mods=0008 0x87e4040->FXAccelTable::addAccel: code=006f state=0008 FXWindow::FXWindow 0x87e4868 parseHotKey(Spin &Timer) = code=0074 mods=0008 0x87e4040->FXAccelTable::addAccel: code=0074 state=0008 FXWindow::FXWindow 0x87e4a78 parseHotKey(Spin &Chore) = code=0063 mods=0008 0x87e4040->FXAccelTable::addAccel: code=0063 state=0008 FXWindow::FXWindow 0x87e4c78 parseHotKey(&Stop Spin) = code=0073 mods=0008 0x87e4040->FXAccelTable::addAccel: code=0073 state=0008 FXWindow::FXWindow 0x87e4e88 parseHotKey(&Exit) = code=0065 mods=0008 0x87e4040->FXAccelTable::addAccel: code=0065 state=0008 FXWindow::FXWindow 0x87e4fa8 FXApp::create FXVisual::create 0x87adaa8 FXVisual::create: need no colormap Pixmap monochrome: depth = 1 gamma = 1.000000 map_entries = 2 numcolors = 2 black = 0 white = 1 FXVisual::create 0x87b9ef8 FXVisual::create: use default colormap True color: visual id = 0x21 depth = 24 gamma = 1.000000 map_entries = 256 numcolors = 16777216 BitOrder = LSBFirst ByteOrder = LSBFirst Padding = 32 redmax = 255; redmask =00ff0000; redshift = 16 greenmax = 255; greenmask =0000ff00; greenshift = 8 bluemax = 255; bluemask =000000ff; blueshift = 0 FXFont::create 0x87d8a48 FXFont::create: xlfd font wantfamily=helvetica wantforge= wantsize=90 wantweight=0 wantslant=0 wantsetwidth=0 wantencoding=0 wanthints=0 res=100 bweight=10 bsize= 0 bslant=0 bsetwidth=0 bscalable=0 bpolymorph=0 bxres=75 byres=75 xlfd="-adobe-helvetica-medium-r-normal--12-120-75-75-p-67-iso8859-1" wantedName=helvetica wantedSize=90 wantedWeight=0 wantedSlant=0 wantedSetwidth=0 wantedEncoding=0 actualName=helvetica [adobe] actualSize=90 actualWeight=50 actualSlant=5 actualSetwidth=100 actualEncoding=1 FXCursor::create 0x87d8810 FXCursor::create: stock cursor FXCursor::create 0x87ac9e0 FXCursor::create: stock cursor FXCursor::create 0x87aca10 FXCursor::create: stock cursor FXCursor::create 0x87c6348 FXCursor::create: stock cursor FXCursor::create 0x87c6378 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87c73b0 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87c83e8 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87c9420 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87ca458 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87cb490 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87cc4c8 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87ce538 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87cd500 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87cf570 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d05a8 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d15e0 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d2618 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d3650 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d4688 FXCursor::create: custom b/w 16x16 cursor FXCursor::create 0x87d4ac0 FXCursor::create: custom b/w 16x16 cursor FXCursor::create 0x87d4ef8 FXCursor::create: custom b/w 16x16 cursor FXCursor::create 0x87d5330 FXCursor::create: custom b/w 16x16 cursor FXCursor::create 0x87d5768 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d67a0 FXCursor::create: custom b/w 32x32 cursor FXCursor::create 0x87d77d8 FXCursor::create: custom b/w 32x32 cursor GLTestWindow::create 0x87e3f48 FXHorizontalFrame::create 0x87e4070 FXVerticalFrame::create 0x87e4110 FXLabel::create 0x87e41b0 FXHorizontalSeparator::create 0x87e42e0 FXVerticalFrame::create 0x87e4378 FXGLCanvas::create 0x87e4418 FXGLVisual::create 0x87e6020 Found OpenGL version 1.2; 3 visuals Visual 0x21 (0) match value = 10009 red size = 8 green size = 8 blue size = 8 alpha size = 8 depth size = 24 double buf = 1 stencil = 8 acc red = 0 acc green = 0 acc blue = 0 acc alpha = 0 stereo = 0 Visual 0x22 (1) match value = 10009 red size = 8 green size = 8 blue size = 8 alpha size = 8 depth size = 24 double buf = 1 stencil = 8 acc red = 0 acc green = 0 acc blue = 0 acc alpha = 0 stereo = 0 Visual 0x76 (2) match value = 11010008 red size = 8 green size = 8 blue size = 8 alpha size = 8 depth size = 0 double buf = 0 stencil = 0 acc red = 0 acc green = 0 acc blue = 0 acc alpha = 0 stereo = 0 Best Visual 0x21 match value = 10009 FXGLVisual::create: use default colormap True color: visual id = 0x21 depth = 24 gamma = 1.000000 map_entries = 256 numcolors = 16777216 BitOrder = LSBFirst ByteOrder = LSBFirst Padding = 32 redmax = 255; redmask =00ff0000; redshift = 16 greenmax = 255; greenmask =0000ff00; greenshift = 8 bluemax = 255; bluemask =000000ff; blueshift = 0 redSize: 8 greenSize: 8 blueSize: 8 alphaSize: 8 depthSize: 24 stencilSize: 8 accumRedSize: 0 accumGreenSize: 0 accumBlueSize: 0 accumAlphaSize: 0 doubleBuffer: 1 stereo: 0 accelerated: 1 FXVerticalFrame::create 0x87e4498 FXLabel::create 0x87e4550 FXHorizontalSeparator::create 0x87e4650 FXButton::create 0x87e4720 FXButton::create 0x87e4868 FXButton::create 0x87e4a78 FXButton::create 0x87e4c78 FXButton::create 0x87e4e88 FXToolTip::create 0x87e4fa8 Start run GLTestWindow::onFocusIn 0x87e3f48 SEL_KEYRELEASE code=ff0d state=0010 stickyMods=0000 text="" FXButton::killFocus 0x87e4c78 GLTestWindow::onFocusOut 0x87e3f48 GLTestWindow::onFocusIn 0x87e3f48 GLTestWindow::onEnter 0x87e3f48 (CROSSINGNORMAL) FXHorizontalFrame::onEnter 0x87e4070 (CROSSINGNORMAL) FXVerticalFrame::onEnter 0x87e4498 (CROSSINGNORMAL) FXButton::onEnter 0x87e4e88 (CROSSINGNORMAL) FXButton::onFocusSelf 0x87e4e88 FXButton::setFocus 0x87e4e88 FXVerticalFrame::setFocus 0x87e4498 FXHorizontalFrame::setFocus 0x87e4070 GLTestWindow::changeFocus: from (nil) to 0x87e4070 FXHorizontalFrame::onFocusIn 0x87e4070 FXHorizontalFrame::changeFocus: from (nil) to 0x87e4498 FXVerticalFrame::onFocusIn 0x87e4498 FXVerticalFrame::changeFocus: from (nil) to 0x87e4e88 FXButton::onFocusIn 0x87e4e88 FXButton::grab 0x87e4e88 FXButton::ungrab 0x87e4e88 FXApp::exit End run FXGLVisual::~FXGLVisual 0x87e6020 FXGLVisual::destroy 0x87e6020 FXVisual::~FXVisual 0x87e6020 FXWindow::~FXWindow 0x87e41b0 FXWindow::destroy 0x87e41b0 FXWindow::~FXWindow 0x87e42e0 FXWindow::destroy 0x87e42e0 FXWindow::~FXWindow 0x87e4418 FXWindow::destroy 0x87e4418 FXWindow::destroy: 0x87e4418: removing from WM_COLORMAP_WINDOWS FXWindow::~FXWindow 0x87e4378 FXWindow::destroy 0x87e4378 FXWindow::~FXWindow 0x87e4110 FXWindow::destroy 0x87e4110 FXWindow::~FXWindow 0x87e4550 FXWindow::destroy 0x87e4550 FXWindow::~FXWindow 0x87e4650 FXWindow::destroy 0x87e4650 0x87e4040->FXAccelTable::removeAccel: code=006f state=0008 FXWindow::~FXWindow 0x87e4720 FXWindow::destroy 0x87e4720 0x87e4040->FXAccelTable::removeAccel: code=0074 state=0008 FXWindow::~FXWindow 0x87e4868 FXWindow::destroy 0x87e4868 0x87e4040->FXAccelTable::removeAccel: code=0063 state=0008 FXWindow::~FXWindow 0x87e4a78 FXWindow::destroy 0x87e4a78 0x87e4040->FXAccelTable::removeAccel: code=0073 state=0008 FXWindow::~FXWindow 0x87e4c78 FXWindow::destroy 0x87e4c78 0x87e4040->FXAccelTable::removeAccel: code=0065 state=0008 FXWindow::~FXWindow 0x87e4e88 FXWindow::destroy 0x87e4e88 FXComposite::changeFocus: from 0x87e4e88 to (nil) FXWindow::~FXWindow 0x87e4498 FXWindow::destroy 0x87e4498 FXComposite::changeFocus: from 0x87e4498 to (nil) FXWindow::~FXWindow 0x87e4070 FXWindow::destroy 0x87e4070 FXComposite::changeFocus: from 0x87e4070 to (nil) FXWindow::~FXWindow 0x87e3f48 FXWindow::destroy 0x87e3f48 0x87e4040->FXAccelTable::~FXAccelTable FXWindow::~FXWindow 0x87e4fa8 FXWindow::destroy 0x87e4fa8 FXWindow::~FXWindow 0x87d8840 FXVisual::~FXVisual 0x87b9ef8 FXVisual::destroy 0x87b9ef8 FXVisual::~FXVisual 0x87adaa8 FXVisual::destroy 0x87adaa8 FXFont::~FXFont 0x87d8a48 FXFont::destroy 0x87d8a48 FXCursor::~FXCursor 0x87ac9e0 FXCursor::destroy 0x87ac9e0 FXCursor::~FXCursor 0x87aca10 FXCursor::destroy 0x87aca10 FXCursor::~FXCursor 0x87c6348 FXCursor::destroy 0x87c6348 FXCursor::~FXCursor 0x87c6378 FXCursor::destroy 0x87c6378 FXCursor::~FXCursor 0x87c73b0 FXCursor::destroy 0x87c73b0 FXCursor::~FXCursor 0x87c83e8 FXCursor::destroy 0x87c83e8 FXCursor::~FXCursor 0x87c9420 FXCursor::destroy 0x87c9420 FXCursor::~FXCursor 0x87ca458 FXCursor::destroy 0x87ca458 FXCursor::~FXCursor 0x87cb490 FXCursor::destroy 0x87cb490 FXCursor::~FXCursor 0x87cc4c8 FXCursor::destroy 0x87cc4c8 FXCursor::~FXCursor 0x87cd500 FXCursor::destroy 0x87cd500 FXCursor::~FXCursor 0x87ce538 FXCursor::destroy 0x87ce538 FXCursor::~FXCursor 0x87cf570 FXCursor::destroy 0x87cf570 FXCursor::~FXCursor 0x87d05a8 FXCursor::destroy 0x87d05a8 FXCursor::~FXCursor 0x87d15e0 FXCursor::destroy 0x87d15e0 FXCursor::~FXCursor 0x87d2618 FXCursor::destroy 0x87d2618 FXCursor::~FXCursor 0x87d3650 FXCursor::destroy 0x87d3650 FXCursor::~FXCursor 0x87d4688 FXCursor::destroy 0x87d4688 FXCursor::~FXCursor 0x87d4ac0 FXCursor::destroy 0x87d4ac0 FXCursor::~FXCursor 0x87d4ef8 FXCursor::destroy 0x87d4ef8 FXCursor::~FXCursor 0x87d5330 FXCursor::destroy 0x87d5330 FXCursor::~FXCursor 0x87d5768 FXCursor::destroy 0x87d5768 FXCursor::~FXCursor 0x87d67a0 FXCursor::destroy 0x87d67a0 FXCursor::~FXCursor 0x87d77d8 FXCursor::destroy 0x87d77d8 FXCursor::~FXCursor 0x87d8810 FXCursor::destroy 0x87d8810 0x87ac230->FXTranslator::~FXTranslator FXApp::closeDisplay: closing display. ------------------------------------------------------------------------------ Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers & brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, & iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com _______________________________________________ Foxgui-users mailing list Foxgui-users@... https://lists.sourceforge.net/lists/listinfo/foxgui-users |
|
|
|
|
|
Re: OpenGL problem since I change my laptopOn Monday 01 June 2009, ninjahman wrote:
> Hello, > > I've a problem similar to the one discussed in thread "OpenGL Problems > with openSUSE 11.1". The difference is that I don't manage to solve it. > I tried fox-1.6.36 and fox-1.7.19 with GLX_VERSION_1_3 defined and not. > fox-1.7.19 with GLX_VERSION_1_3 defined really produce an error, but > other solutions do no complain. > > I compile fox-1.7.19 with debug enable, GLX_VERSION_1_3 undefined and > run app with -tracelevel 151. Printed information shows that everything > is ok, the best visual is chosen which seem to be a sane visual. > > Also glxgears and other apps using opengl work well. > > Please find attached snapshots of running gltest and glviewer. Please check the latest snapshot; as you suggest it probably has something to do with GLX 1.3. Basically, the problem is that the header file has GLX 1.3 but your X Server doesn't. Till very recently (spring this year), GLX 1.3 only worked on NVIDIA chips. FOX 1.7 has reverted to GLX 1.1. However, we didn't need to drop the multi- sample capability because the extensions to GLX 1.1 DO work. I'll keep it at GLX 1.1 for a while, until GLX 1.3 support is more universal. - Jeroen ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Foxgui-users mailing list Foxgui-users@... https://lists.sourceforge.net/lists/listinfo/foxgui-users |
|
|
Re: OpenGL problem since I change my laptopJeroen van der Zijp a écrit :
> On Monday 01 June 2009, ninjahman wrote: > >> Hello, >> >> I've a problem similar to the one discussed in thread "OpenGL Problems >> with openSUSE 11.1". The difference is that I don't manage to solve it. >> I tried fox-1.6.36 and fox-1.7.19 with GLX_VERSION_1_3 defined and not. >> fox-1.7.19 with GLX_VERSION_1_3 defined really produce an error, but >> other solutions do no complain. >> >> I compile fox-1.7.19 with debug enable, GLX_VERSION_1_3 undefined and >> run app with -tracelevel 151. Printed information shows that everything >> is ok, the best visual is chosen which seem to be a sane visual. >> >> Also glxgears and other apps using opengl work well. >> >> Please find attached snapshots of running gltest and glviewer. >> > > Please check the latest snapshot; as you suggest it probably has something > to do with GLX 1.3. > > Basically, the problem is that the header file has GLX 1.3 but your X Server > doesn't. Till very recently (spring this year), GLX 1.3 only worked on > NVIDIA chips. > > FOX 1.7 has reverted to GLX 1.1. However, we didn't need to drop the multi- > sample capability because the extensions to GLX 1.1 DO work. I'll keep it > at GLX 1.1 for a while, until GLX 1.3 support is more universal. > > > > - Jeroen > > I solve the problem. crw-rw---- 1 root video 226, 0 Jun 2 12:39 /dev/dri/card0 and I did not belong to video group. Now everything's ok, but there is still an unanswered question: why all opengl applications worked before but not fox based applications ? ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Foxgui-users mailing list Foxgui-users@... https://lists.sourceforge.net/lists/listinfo/foxgui-users |
|
|
Re: OpenGL problem since I change my laptopOn Tuesday 02 June 2009, ninjahman wrote:
> mirv a écrit : > > I can't remember all of that thread - and I'm at work so don't have > > the time right now to go looking for it - but what error does > > GLX_VERSION_1_3 produce? > > > > > > mirv > > the Silly Fish. > > > > > > On Mon, Jun 1, 2009 at 5:55 PM, ninjahman <ninjahman@... > > <mailto:ninjahman@...>> wrote: > > > > Hello, > > > > I've a problem similar to the one discussed in thread "OpenGL Problems > > with openSUSE 11.1". The difference is that I don't manage to > > solve it. > > I tried fox-1.6.36 and fox-1.7.19 with GLX_VERSION_1_3 defined and > > not. > > fox-1.7.19 with GLX_VERSION_1_3 defined really produce an error, but > > other solutions do no complain. > > > > I compile fox-1.7.19 with debug enable, GLX_VERSION_1_3 undefined and > > run app with -tracelevel 151. Printed information shows that > > everything > > is ok, the best visual is chosen which seem to be a sane visual. > > > > Also glxgears and other apps using opengl work well. > > > > Please find attached snapshots of running gltest and glviewer. > > > > thanks for your help. > > > > Xavier > > > > > > > > the procuced error with GLX_VERSION_1_3 enabled is: > > $ ./gltest > failed to create drawable > X Error: code 9 major 55 minor 0: BadDrawable (invalid Pixmap or Window > parameter). > X Error: code 9 major 55 minor 0: BadDrawable (invalid Pixmap or Window > parameter). > X Error: code 9 major 14 minor 0: BadDrawable (invalid Pixmap or Window > parameter). > X Error: code 9 major 14 minor 0: BadDrawable (invalid Pixmap or Window > parameter). > X Error: code 9 major 14 minor 0: BadDrawable (invalid Pixmap or Window > parameter). This indeed looks familiar. Basically, if you see black or unrepainted windows, GLX1.3 is the problem. - Jeroen -- +----------------------------------------------------------------------------+ | Copyright (C) 23:20 06/ 2/2009 Jeroen van der Zijp. All Rights Reserved. | +----------------------------------------------------------------------------+ ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Foxgui-users mailing list Foxgui-users@... https://lists.sourceforge.net/lists/listinfo/foxgui-users |
| Free embeddable forum powered by Nabble | Forum Help |