Invitation to connect on LinkedIn

2009-11-25T07:43:39Z

I'd like to add you to my professional network on LinkedIn.

- Shrikant

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: collaboration proposal

2009-11-25T02:52:10Z

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Brian,

Brian Cavagnolo wrote:
>
> Wind River has been evaluating libsyncml, and we're happy with the
> results so
> far. We'd like to collaborate to move some of our changes upstream.
> Also, we
> have some other developments in mind that we'd also like to
> discuss/collaborate/contribuite. I've listed the rough areas in which the
> changes fall. Please comment if these changes sound useful, reasonable,
> etc.:

The simple answer is a big YES to all points. I only comment the points
where I have more to say then only yes ;)

> 3. Split the ENABLE_HTTP functionality into two parts:
> ENABLE_HTTP_CLIENT and
> ENABLE_HTTP_SERVER. This will allow only building the required half.

Do you need this because of your different libraries for the client and
server part?

> 4. Develop alternative HTTP client that does not depend on libsoup. (We're
> using libcurl instead). We'd like to avoid depending on libsoup and the
> portions of glib required to support it.

Which portions of the glib do you mean? libsoup is problematic for me
because of the poor SSL/TLS support. The upcoming libsyncml 0.6.0 stuff
(please see trunk) makes heavy use of the glib.

> 6. Migrate away from the heavy polling to a more event-driven model.

Definitely a long term wish from me.

So you are more than welcome. I hope you can split your patches into
small parts. This would make it possible for me or/and you to port them
to the new trunk.

Best regards

Michael

P.S. BTW we have a developer list.
- --
___________________________________________________________________

Michael Bell Humboldt-Universitaet zu Berlin

Tel.: +49 (0)30-2093 2482 ZE Computer- und Medienservice
Fax: +49 (0)30-2093 2704 Unter den Linden 6
michael.bell@... D-10099 Berlin
___________________________________________________________________

PGP Fingerprint: 09E4 3D29 4156 2774 0F2C C643 D8BD 1918 2030 5AAB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAksNDIIACgkQ2L0ZGCAwWqtNnwCg1HjbX6juR+Qf6VnHl0RG0RX2
6HYAn3uNQJyhau2zt5XVLIR+1WAv0fwT
=FLrl
-----END PGP SIGNATURE-----

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

collaboration proposal

2009-11-24T10:47:41Z

Hello,

Wind River has been evaluating libsyncml, and we're happy with the
results so
far. We'd like to collaborate to move some of our changes upstream.
Also, we
have some other developments in mind that we'd also like to
discuss/collaborate/contribuite. I've listed the rough areas in which the
changes fall. Please comment if these changes sound useful, reasonable,
etc.:

1. Fix bugs in the syncml-ds-tool HTTP client behavior.

2. Introduce some regular automated tests for syncml-ds-tool that spawn a
server, spawn a client, perform syncs, and analyze the results.

3. Split the ENABLE_HTTP functionality into two parts:
ENABLE_HTTP_CLIENT and
ENABLE_HTTP_SERVER. This will allow only building the required half.

4. Develop alternative HTTP client that does not depend on libsoup. (We're
using libcurl instead). We'd like to avoid depending on libsoup and the
portions of glib required to support it.

5. Develop an alternative HTTP server that does not depend on libsoup.
(We're
using libmicrohttpd instead).

6. Migrate away from the heavy polling to a more event-driven model.

Thanks,
Brian

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: [SPAM] I'm in desperate need for a guide

2009-11-16T00:30:18Z

On Sun, Nov 15, 2009 at 00:24:28 +0800, Yiping Cheng wrote:

> Thank you very much! I have tried and achieved partial success. But
> there seems to still have plenty of problems waiting me. I now know
> how to install glib2, simply the sequence: ./configure; make; make
> install but when executing ./configure, it said it needs gettext. So
> I also downloaded gettext and installed gettext. but gettext did not
> install smoothly. I now have no idea how to proceed. I have given
> up.

That's what package managers are intended for. They just install the
required packages for you. However, for some reason, you used the most
error prone way (for unexperienced users) to install software in Linux.

> I used to write programs under Windows and Visual Studio and I never
> experienced such problems before. And I now hate Linux so much that
> I now swear I will not touch it again. The project I undertake is to
> develop a PIM program using SyncML, and I need to study the SyncML

Haha, you made my day.

Regards,
Tino

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: [SPAM] I'm in desperate need for a guide

2009-11-13T09:15:20Z

On Fri, Nov 13, 2009 at 14:34:52 +0800, Yiping Cheng wrote:

[...]

> directory on the linux machine. But CMake failed to generate the
> make file giving error notices such as "cannot find glib2, libxml2,
> openobex, etc" I have already downloaded these libraries but I do not
> know where to put them so that they can be found by CMake.

- just use the package manager that comes with your distribution

- install the development packages for those libs, usually they have a
"-dev" appended to the name of the library package

Regards,
Tino

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

[SPAM] I'm in desperate need for a guide

2009-11-12T22:34:52Z

Hi all,

I am a newcomer to SyncML and Linux but I have some experience on Windows C/C++ programming.

I am having troubles getting libSyncML C code compiled so I need your help.

I have successfully installed the virtual Linux machine (using Sun VirtualBox and Arch Linux distribution).

I also successfully installed CMake and copied the LibSyncML source files into a directory on the linux machine.

But CMake failed to generate the make file giving error notices such as "cannot find glib2, libxml2, openobex, etc"

I have already downloaded these libraries but I do not know where to put them so that they can be found by CMake.

The INSTALL.txt file gave incomplete information on how to build libSyncML. In addition I don't know how I could

replace the "prefix", "path", "source" with their concrete values.

    mkdir build
    cd build
    cmake -DCMAKE_INSTALL_PREFIX=$prefix/path/to/libsyncml/source/
    make
    make test
    make install

Could anyone please give me some enlightenment? Thank you very much!

Best regards,

Yiping Cheng

Re: libsyncml failure with N97

2009-11-11T14:55:23Z

On Monday 02 November 2009, Michael Bell wrote:
> > From source I've build, on a big endian powerpc GNU/Debian Lenny system:
> > build:

> > libwbxml-0.10.7
> > libsyncml-0.5.4

> > b) Side problem:
> > Exporting SYNCML_TRACE=/tmp/somedir
> > lead to a seqmentation fault. (SYNCML_LOG was also set and worked).
>
> Do you still have the logged messages?

bin/syncml-ds-tool -u 0 --identifier "PC Suite" --wbxml --sync text/x-vcard
Contacts
worked for me today, I have no idea why it works today, this is the same
command as I was trying a few days ago.

> > Program received signal SIGSEGV, Segmentation fault.
> > [Switching to Thread 0x490304d0 (LWP 15122)]
> > 0x0fa644c8 in strlen () from /lib/libc.so.6
> > (gdb) bt
> > #0 0x0fa644c8 in strlen () from /lib/libc.so.6
> > #1 0x0fa2d364 in vfprintf@@GLIBC_2.4 () from /lib/libc.so.6
> > #2 0x0fa528e8 in vasprintf@@GLIBC_2.4 () from /lib/libc.so.6
> > #3 0x0fee27c8 in g_vasprintf () from /usr/lib/libglib-2.0.so.0
> > #4 0x0fec8798 in g_strdup_vprintf () from /usr/lib/libglib-2.0.so.0
> > #5 0x0ff87c74 in smlTrace ()
> > from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
> > #6 0x0ff8a33c in smlTransportReceiveEvent ()
> > from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
>
> This is a bug in a trace statement. Do you have the generated traces
> before the crash happens? Usually this is a good description of the
> error condition.

Attached as 20091111-crash.tar.bz2, HTH.

--
Managing Director - Owner: www.intevation.net (Free Software Company)
Deputy Germany Coordinator: fsfeurope.org. Coordinator: Kolab-Konsortium.com.
Intevation GmbH, Neuer Graben 17, Osnabrück, DE; AG Osnabrück, HRB 18998
Geschäftsführer Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

20091111-crash.tar.bz2 (11K) Download Attachment
signature.asc (205 bytes) Download Attachment

Assertion fail in smlDataSyncMappingCallback

2009-11-03T01:45:22Z

Hello again,

I'm using version 0.39 (full list at [1] below), and am getting an
assertion failure shown at [2] every time I try and sync between obex
and file. This happens even if I wipe out all previous history; i.e. I
follow the sequence below:

1) Manually delete call contacts from my Nokia 6300
2) Delete everything under d:/predefsyncml
3) Reboot the phone
4) Ensure I have one simple contact in my "file" area
5) Run osynctool --sync with my obex/file config.

Step (5) fails as shown at [2].

Not sure if this is relevant, but when I look at the trace files, I
always see a CmdID of 10000, and the CDATA is empty. Sample shown at
[3] below. I can provide a trace if required.

Thanks for any tips,

Jason.

----------------------------------
[1] versions used
libopensync-0.39.tar.bz2
libopensync-plugin-evolution2-0.39.tar.bz2
libopensync-plugin-file-0.39.tar.bz2
libopensync-plugin-syncml-0.39.tar.bz2
libopensync-plugin-vformat-0.39.tar.bz2
libopensync-plugin-xmlformat-0.39.tar.bz2
libsyncml-0.5.4.tar.bz2
libwbxml-0.10.7.tar.bz2
osynctool-0.39.tar.bz2

----------------------------------
[2] assertion failure

ObjType: contact
Member 1: Adding(1) Modifying(0) Deleting(0)
Member 2: Adding(0) Modifying(0) Deleting(0)

Do you want to continue the synchronization? (N/y): y

OK! Completing synchronization!
Main sink of member 1 of type syncml-obex-client committed all changes.
contact sink of member 2 of type file-sync committed all changes.
Main sink of member 2 of type file-sync committed all changes.
/home/jas/opensync-0.39/libsyncml-0.5.4/libsyncml/data_sync_api/data_sync_callbacks.c:653:E:smlDataSyncMappingCallback: Assertion "datastore->dsObject->mappingCallback" failed
Aborted

----------------------------------
[3] extract from trace
[1257240682.611916] smlXmlAssemblerRunFull: Message Assembled: <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE SyncML PUBLIC "-//SYNCML//DTD SyncML 1.1//EN" "http://www.syncml.org/docs/syncml_represent_v11_20020213.dtd"><SyncML xmlns="SYNCML:SYNCML1.1"><SyncHdr><VerDTD>1.1</VerDTD><VerProto>SyncML/1.1</VerProto><SessionID>29186</SessionID><MsgID>2</MsgID><Target><LocURI>IMEI:359544018309256</LocURI></Target><Source><LocURI>PC Suite</LocURI></Source><Meta><MaxMsgSize xmlns="syncml:metinf">3584</MaxMsgSize></Meta></SyncHdr>
<SyncBody><Status><CmdID>1</CmdID><MsgRef>2</MsgRef><CmdRef>0</CmdRef><Cmd>SyncHdr</Cmd><TargetRef>PC Suite</TargetRef><SourceRef>IMEI:359544018309256</SourceRef><Data>200</Data></Status>
<Status><CmdID>8</CmdID><MsgRef>2</MsgRef><CmdRef>4</CmdRef><Cmd>Sync</Cmd><TargetRef>Contacts</TargetRef><SourceRef>/telecom/pb.vcf</SourceRef><Data>200</Data></Status>
<Sync><CmdID>9</CmdID><Target><LocURI>/telecom/pb.vcf</LocURI></Target><Source><LocURI>Contacts</LocURI></Source><Meta><MaxObjSize xmlns="syncml:metinf">1024000</MaxObjSize></Meta><NumberOfChanges>1</NumberOfChanges>
<Add><CmdID>10000</CmdID><Meta><Type xmlns="syncml:metinf">text/x-vcard</Type><Size xmlns="syncml:metinf">58</Size></Meta><Item><Source><LocURI>320</LocURI></Source><Data><![CDATA[]]></Data><MoreData></MoreData></Item>
</Add></Sync><Final></Final></SyncBody></SyncML>

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: libsyncml failure with N97

2009-11-02T01:22:59Z

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Bernhard Reiter wrote:
> This is just a short report of one attempt to try libsyncml with Nokia's N97
> smartphone (S60 5th edition).
> I am moving off the device so I might not be able to follow up on it,
> I'd still thought you might want the feedback.
> Please copy me on relevant replies.
>
> Details:
> From source I've build, on a big endian powerpc GNU/Debian Lenny system:
> build:

Okay, this is really interesting hardware ;)

> libwbxml-0.10.7
> libsyncml-0.5.4

> I'v tried several variations with --wbxml and --identifier "PC Suite Data
> Sync" and "Addressbook".

- --wbxml should be enough.

> b) Side problem:
> Exporting SYNCML_TRACE=/tmp/somedir
> lead to a seqmentation fault. (SYNCML_LOG was also set and worked).

Do you still have the logged messages?

> Program received signal SIGSEGV, Segmentation fault.
> [Switching to Thread 0x490304d0 (LWP 15122)]
> 0x0fa644c8 in strlen () from /lib/libc.so.6
> (gdb) bt
> #0 0x0fa644c8 in strlen () from /lib/libc.so.6
> #1 0x0fa2d364 in vfprintf@@GLIBC_2.4 () from /lib/libc.so.6
> #2 0x0fa528e8 in vasprintf@@GLIBC_2.4 () from /lib/libc.so.6
> #3 0x0fee27c8 in g_vasprintf () from /usr/lib/libglib-2.0.so.0
> #4 0x0fec8798 in g_strdup_vprintf () from /usr/lib/libglib-2.0.so.0
> #5 0x0ff87c74 in smlTrace ()
> from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
> #6 0x0ff8a33c in smlTransportReceiveEvent ()
> from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2

This is a bug in a trace statement. Do you have the generated traces
before the crash happens? Usually this is a good description of the
error condition.

BTW I have an E71 which is a S60 too but I use bluetooth all the time.

Best regards

Michael
- --
___________________________________________________________________

Michael Bell Humboldt-Universitaet zu Berlin

Tel.: +49 (0)30-2093 2482 ZE Computer- und Medienservice
Fax: +49 (0)30-2093 2704 Unter den Linden 6
michael.bell@... D-10099 Berlin
___________________________________________________________________

PGP Fingerprint: 09E4 3D29 4156 2774 0F2C C643 D8BD 1918 2030 5AAB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrupO8ACgkQ2L0ZGCAwWqs9vACeLYoOv4pzCHjalhDTjXKZ1Bp0
h0QAoJMVhH9/QUX121JwcGeD2laES1rZ
=uUMM
-----END PGP SIGNATURE-----

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

libsyncml failure with N97

2009-11-02T00:31:26Z

This is just a short report of one attempt to try libsyncml with Nokia's N97
smartphone (S60 5th edition).
I am moving off the device so I might not be able to follow up on it,
I'd still thought you might want the feedback.
Please copy me on relevant replies.

Thanks for writing Free Software!
Bernhard

Details:
From source I've build, on a big endian powerpc GNU/Debian Lenny system:
build:

libwbxml-0.10.7
libsyncml-0.5.4

using already existing packages:
ii libxslt1-dev 1.1.24-2
ii libopenobex1-dev 1.3+cvs20070425-2
Linux version 2.6.26-1-powerpc (Debian 2.6.26-13lenny2)

I can see the interfaces:

# bin/syncml-ds-tool -u
Found 2 USB OBEX interfaces
Interface 0:
Manufacturer: Nokia
Product: Nokia N97
Interface description: SYNCML-SYNC
Interface 1:
Manufacturer: Nokia
Product: Nokia N97
Interface description: PC Suite Services

a) Main problem:
All attempts to see the Contacts fail,
error messages are always similiar to

# bin/syncml-ds-tool -u 0 --version 1.2 --dumpinfo
All datastores will be requested because no datastore is configured.
** Message: Remote device was successfully disconnected.
** Message: SyncML session finished successfully.
Didn't receive the device information though it was requested.
** Message: ERROR: Command failed. The recipient encountered an unexpected
condition which prevented it from fulfilling the request. The request was not
successful (-110).

bin/syncml-ds-tool -u 0 --identifier "PC Suite" --sync text/x-vcard Contacts
** Message: Remote device was successfully disconnected.
** Message: SyncML session finished successfully.
** Message: ERROR: Command failed. The recipient encountered an unexpected
condition which prevented it from fulfilling the request. The request was not
successful (-110).

I'v tried several variations with --wbxml and --identifier "PC Suite Data
Sync" and "Addressbook".

b) Side problem:
Exporting SYNCML_TRACE=/tmp/somedir
lead to a seqmentation fault. (SYNCML_LOG was also set and worked).
Here is a simple backtrace, I did not inquire much further:
gdb bin/syncml-ds-tool
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "powerpc-linux-gnu"...
(gdb) run -u 0 --identifier "PC Suite" --wbxml --sync text/x-vcard Contacts
Starting program: /mobilehome/bernhard/hacking/opensync/bin/syncml-ds-tool -u
0 --identifier "PC Suite" --wbxml --sync text/x-vcard Contacts
[Thread debugging using libthread_db enabled]
[New Thread 0x48023e90 (LWP 15118)]
[New Thread 0x488304d0 (LWP 15121)]
[New Thread 0x490304d0 (LWP 15122)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x490304d0 (LWP 15122)]
0x0fa644c8 in strlen () from /lib/libc.so.6
(gdb) bt
#0 0x0fa644c8 in strlen () from /lib/libc.so.6
#1 0x0fa2d364 in vfprintf@@GLIBC_2.4 () from /lib/libc.so.6
#2 0x0fa528e8 in vasprintf@@GLIBC_2.4 () from /lib/libc.so.6
#3 0x0fee27c8 in g_vasprintf () from /usr/lib/libglib-2.0.so.0
#4 0x0fec8798 in g_strdup_vprintf () from /usr/lib/libglib-2.0.so.0
#5 0x0ff87c74 in smlTrace ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#6 0x0ff8a33c in smlTransportReceiveEvent ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#7 0x0ffb9028 in smlTransportObexClientEvent ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#8 0x0fb64fa8 in ?? () from /usr/lib/libopenobex.so.1
#9 0x0fb67f48 in ?? () from /usr/lib/libopenobex.so.1
#10 0x0fb651d8 in ?? () from /usr/lib/libopenobex.so.1
#11 0x0fb674a8 in ?? () from /usr/lib/libopenobex.so.1
#12 0x0fb64890 in OBEX_HandleInput () from /usr/lib/libopenobex.so.1
#13 0x0ffbb0e0 in smlTransportObexClientConnect ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#14 0x0ff89e94 in smlTransportWorkerHandler ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#15 0x0ff80784 in smlQueueDispatch ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#16 0x0ff7edd4 in _queue_dispatch ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#17 0x0fe9c70c in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#18 0x0fea0ea8 in ?? () from /usr/lib/libglib-2.0.so.0
#19 0x0fea15e4 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#20 0x0ff88ca8 in smlThreadStartCallback ()
from /mobilehome/bernhard/hacking/opensync/lib/libsyncml.so.2
#21 0x0fed210c in ?? () from /usr/lib/libglib-2.0.so.0
#22 0x0f963e34 in start_thread () from /lib/libpthread.so.0
#23 0x0fac4ab0 in clone () from /lib/libc.so.6
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
(gdb)

More phone detail:
gsmctl -d /dev/ttyACM0 ALL

<ME0> Hersteller: Nokia
<ME1> Modell: Nokia N97
<ME2> Revision: V ICPR72_09w17.7
24-08-09
RM-505
(c) Nokia
V 12.0.026
[.. fails later]

--
Managing Director - Owner: www.intevation.net (Free Software Company)
Deputy Germany Coordinator: fsfeurope.org. Coordinator: Kolab-Konsortium.com.
Intevation GmbH, Neuer Graben 17, Osnabrück, DE; AG Osnabrück, HRB 18998
Geschäftsführer Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

signature.asc (205 bytes) Download Attachment

Re: OT: Reset Nokia 5800 Was: Did opensync kill mynokia 5800 ?

2009-10-26T19:15:09Z

Thanks Achim, I actually found another source of the same information but it did not suggest, as yours did, that I remove the SIM card first. Thats a pretty good idea ! Not a problem in my case, it was all new so nothing I needed to keep.

The hard reset worked, took phone back to factory conditions (apart from any user set lock code).

I then tried opensync (et al) again, this time a little more informed of what I was doing. Its all working fine now. Valuable things I learn include -

1. In Nokia S60 at least always set recvLimit (to, ie 10000). I believe the lack of that setting has two effects, firstly, sync fails and something on the PC goes into a loop using most of a cpu. I did not notice this at first in the GUI, it terminates cleanly and being a dual core box it was still responsive. The second thing I associate with the lack of the recvLimit is that it trashed the OS in my phone, will relate to the endless loop, perhaps a buffer overflow in the phone ? Anyway, setting recvLimit does no harm other than perhaps slowing down the transfer a bit. I suggest, play safe, set it !

2. A failed run does not seem to be something multisync can recover from. Clean out part or all of .opensync directory and start again !

There are a couple of phone/connection specific HowTos on the web site but I think that whats necessary is a general one that covers the common ideas and maybe mentions in line any differences between (eg) phones. If its regarded as a good idea, I'll have a first cut ....

David

On Tue 27/10/09 3:33 AM , Achim Settelmeier opensync-users@... sent:

> Hi dbannon,
>
> > [...] Nokia 5800 and now the phone does not
> boot. It brings up its > screen but does not respond to the key unlock
> slide switch. So nothing > works effectively. It does not accept calls
> either.
> Here's how to hard reset the phone (this might kill some data, too!):
> http://discussions.europe.nokia.com/discussions/board/message?b
> oard.id=smartphones&thread.id=166900
>
> bye,
> Settel
>
> ---------------------------------------------------------------------------
> ---Come build with us! The BlackBerry(R) Developer Conference in SF, CA
> is the only developer event you need to attend this year. Jumpstart
> yourdeveloping skills, take BlackBerry mobile applications to market and stay
> ahead of the curve. Join us from November 9 - 12, 2009. Register now!
> http://p.sf.net/sfu/devconference_______________________________________________
> Opensync-users mailing list
> Opensync-users@...://lists.sourceforge.net/lists/listinfo/opensync-users
>
>

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

OT: Reset Nokia 5800 Was: Did opensync kill my nokia 5800 ?

2009-10-26T10:03:30Z

Hi dbannon,

> [...] Nokia 5800 and now the phone does not boot. It brings up its
> screen but does not respond to the key unlock slide switch. So nothing
> works effectively. It does not accept calls either.

Here's how to hard reset the phone (this might kill some data, too!):
http://discussions.europe.nokia.com/discussions/board/message?board.id=smartphones&thread.id=166900

bye,
Settel

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: syncml-ds-tool to sync Nokia 5800 does not work as expected

2009-10-26T08:05:06Z

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Achim Settelmeier wrote:

>
> I've got some serious problems with syncml-ds-tool from libsyncml 0.5.4:
> syncml-ds-tool -u 0 --identifier "PC Suite" --wbxml \
> --sync text/x-vcalendar Calendar calendar/
> syncs contacts from Nokia 5800 to filesystem. But when I change an
> appointment on the phone and call the same command again, it gets
> overwritten with what's in the filesystem.
>
> That's not what I expect it to do.
> Am I using the wrong tool, am I using the tool wrong or is the tool wrong?

Yes, you are using the wrong tool. syncml-ds-tool (version 0.5.x) was
designed for testing and full sync. This means that you can use it to
backup or restore your mobile but it has no real state or index management.

syncml-ds-tool of the actually prepared 0.6.x series can do such stuff
but the trunk is actually in a beta phase. You can see the planned and
realized stuff at

https://libsyncml.opensync.org/wiki/docs/trunk/syncml-ds-tool

If you want to do real synchronization then please use OpenSync for
this. snycml-ds-tool of libsyncml stable can only be used for testing
and full backup/restore.

Best regards

Michael
- --
___________________________________________________________________

Michael Bell Humboldt-Universitaet zu Berlin

Tel.: +49 (0)30-2093 2482 ZE Computer- und Medienservice
Fax: +49 (0)30-2093 2704 Unter den Linden 6
michael.bell@... D-10099 Berlin
___________________________________________________________________

PGP Fingerprint: 09E4 3D29 4156 2774 0F2C C643 D8BD 1918 2030 5AAB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrlurUACgkQ2L0ZGCAwWqvKxwCgmgRrlJcX2nx18dbMH7DgMp5w
BhcAn1+TgQyfZYwkiMQUDttjhuQOId9h
=0MdZ
-----END PGP SIGNATURE-----

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: syncml-ds-tool to sync Nokia 5800 does not work as expected

2009-10-26T03:06:00Z

On Sun, Oct 25, 2009 at 20:25:53 +0000, Achim Settelmeier wrote:

> Hi,
>
> I've got some serious problems with syncml-ds-tool from libsyncml 0.5.4:
> syncml-ds-tool -u 0 --identifier "PC Suite" --wbxml \
> --sync text/x-vcalendar Calendar calendar/
> syncs contacts from Nokia 5800 to filesystem. But when I change an
> appointment on the phone and call the same command again, it gets
> overwritten with what's in the filesystem.
>
> That's not what I expect it to do.
> Am I using the wrong tool, am I using the tool wrong or is the tool wrong?

I think syncml-ds is the wrong tool, as it has to sync logic. The
"sync" in its name comes from "syncml". To get a real sync, you need to
use osynctool.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Did opensync kill my nokia 5800 ?

2009-10-25T20:05:46Z

Hi Folks, don't want to seem alarmist but it does not look good. I used multisync0.90 as a default ubuntu install to sync Evolution to my (brand new) Nokia 5800 and now the phone does not boot. It brings up its screen but does not respond to the key unlock slide switch. So nothing works effectively. It does not accept calls either.

Maybe I'm wrong and it just choose to fall over ? I guess I'd like to hear people say "No, not possible, get it fixed and try again..."

Details ?
Multisync0.90 0.92.0~svn355-1
libopensync0 0.22-2build1
opensync-plugin-syncml 0.22-2
opensync-plugin-evolution 0.22-2ubuntu2
opensyncutils 0.22-2build1

I used usb to sync evolution to syncml, changing only <identifier> = "PC Suite" and <type> = "5" initially. Played around a couple of times, no luck. Then I found a receipe that set <recvlimit> = "10000" on another Nokia. Now it seemed to run then crashed, I restarted it and it ran to completion. It made lots of duplicates in my evolution contacts list but I thought that may be as a result of starting again after the crash. At this stage, I could see all the contacts in the phone so I was pretty happy !

However, at that point, I shut the phone down and went to bed. In the morning, the phone won't boot. It powers up, apparently normally, I hit the key unlock slide switch and it tells me "hit the key unlock slide switch" (or words to that effect) and thats it ! Only way to power it down is remove the battery. Same thing happens after the battery is put back.

I do have a fairly big contacts list, maybe 400 entries. Could this be a buffer over run that overwrites the OS ? I'd be pretty shocked if there was a bug like that in Nokia's OS.

Any suggestions ?

</recvlimit></type></identifier>

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

syncml-ds-tool to sync Nokia 5800 does not work as expected

2009-10-25T13:25:53Z

Hi,

I've got some serious problems with syncml-ds-tool from libsyncml 0.5.4:
syncml-ds-tool -u 0 --identifier "PC Suite" --wbxml \
--sync text/x-vcalendar Calendar calendar/
syncs contacts from Nokia 5800 to filesystem. But when I change an
appointment on the phone and call the same command again, it gets
overwritten with what's in the filesystem.

That's not what I expect it to do.
Am I using the wrong tool, am I using the tool wrong or is the tool wrong?

bye,
Settel

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: libsyncml and the syncml plugin

2009-10-20T08:05:39Z

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Tino Keitel wrote:
>
> I try to get a Nokia E55 to work with the SyncML plugin, without luck
> so far. So I thought I would have more luck with libsyncml from SVN.
> However, the syncml plugins seems to require an older version of
> libsyncml. At least it looks for libsyncml-1.0.pc, whereas the
> libsyncml from SVN provides libsyncml-3.0.pc. Is the libsyncml from SVN
> used at all for opensync?

The actual OpenSync code uses libsyncml 0.5.x. The maintained code is in
branches/libsyncml-0.5.x. The released versions are in tags/.

The code in libsyncml/trunk is the upcoming version 0.6.x. This version
is no longer API compatible with the 0.5.x series. I had no time until
now to update the trunk code of OpenSync.

So please use libsyncml 0.5.4 together with OpenSync 0.39 or trunk.

Best regards

Michael
- --
___________________________________________________________________

Michael Bell Humboldt-Universitaet zu Berlin

Tel.: +49 (0)30-2093 2482 ZE Computer- und Medienservice
Fax: +49 (0)30-2093 2704 Unter den Linden 6
michael.bell@... D-10099 Berlin
___________________________________________________________________

PGP Fingerprint: 09E4 3D29 4156 2774 0F2C C643 D8BD 1918 2030 5AAB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrd0b8ACgkQ2L0ZGCAwWquNegCeOy6q0SgSTZkz0PT26JlyUluX
h9oAn32JWC0rwHGgrXclASuD5kVdBrg+
=GsPN
-----END PGP SIGNATURE-----

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

libsyncml and the syncml plugin

2009-10-19T15:14:02Z

Hi,

I try to get a Nokia E55 to work with the SyncML plugin, without luck
so far. So I thought I would have more luck with libsyncml from SVN.
However, the syncml plugins seems to require an older version of
libsyncml. At least it looks for libsyncml-1.0.pc, whereas the
libsyncml from SVN provides libsyncml-3.0.pc. Is the libsyncml from SVN
used at all for opensync?

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-29T22:02:21Z

On Tue, Sep 29, 2009 at 23:27:50 +0100, Graham Cobb wrote:
> On Tuesday 29 September 2009 12:40:16 Graham Cobb wrote:
> > I will check in a workround (either disable the check or make it a large
> > number) today. A real fix will take a while longer.
>
> I have committed a change (to the Opensync SVN trunk) which disables the
> pending limit completely so builds from trunk should now allow syncml to
> work. This will break timeout handling so large syncs (typically 100 or more
> items) may see timeout errors!

I tried the change from commit 5858 added to 0.39, now it looks like
this:

Synchronization Forecast Summary:

ObjType: contact
Member 1: Adding(0) Modifying(0) Deleting(0)
Member 3: Adding(113) Modifying(0) Deleting(0)

Do you want to continue the synchronization? (N/y): y

OK! Completing synchronization!
contact sink of member 1 of type evo2-sync committed all changes.
Main sink of member 1 of type evo2-sync committed all changes.
Main sink of member 3 of type syncml-obex-client committed all changes.
Sent an entry 1046 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1045 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1044 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1043 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1042 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1041 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1040 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1039 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1038 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1037 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1036 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1035 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1034 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1033 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1032 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1031 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1030 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1029 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1028 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1027 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1026 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Error for entry pas-id-4AC2E57800000240 (vcard21) and member 3
(syncml-obex-client): Unable to commit change. Error 424
Mapping Error: Unable to commit change. Error 424
contact sink of member 3 of type syncml-obex-client committed all
changes.
Sent an entry 1065 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1064 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1063 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1062 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1061 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1060 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1059 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1058 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1057 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1056 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1055 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1054 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1053 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1052 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1051 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1050 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1049 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1048 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1047 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Error for entry pas-id-4AC2E57800000252 (vcard21) and member 3
(syncml-obex-client): Unable to commit change. Error 424
Mapping Error: Unable to commit change. Error 424
Sent an entry 1087 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1086 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1085 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1084 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1083 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1082 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1081 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1080 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1079 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1078 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1077 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1076 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1075 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1074 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1073 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1072 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1071 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1070 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1069 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1068 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1067 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1066 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1107 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1106 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1105 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1104 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1103 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1102 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1101 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1100 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1099 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1098 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1097 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1096 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1095 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1094 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1093 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1092 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1091 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1090 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1089 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1088 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Error for entry pas-id-4AC2E57800000243 (vcard21) and member 3
(syncml-obex-client): Unable to commit change. Error 424
Mapping Error: Unable to commit change. Error 424
Sent an entry 1128 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1127 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1126 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1125 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1124 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1123 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1122 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1121 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1120 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1119 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1118 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1117 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1116 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1115 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1114 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1113 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1112 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1111 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1110 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1109 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1108 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Error for entry pas-id-4AC2E5780000027E (vcard21) and member 3
(syncml-obex-client): Unable to commit change. Error 424
Mapping Error: Unable to commit change. Error 424
Sent an entry 1134 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1133 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1132 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1131 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1130 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED
Sent an entry 1129 (vcard21) to member 3 (syncml-obex-client).
Changetype ADDED

...and then it hangs and the phone says that the session has finished
but was incomplete.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-29T15:27:50Z

On Tuesday 29 September 2009 12:40:16 Graham Cobb wrote:
> I will check in a workround (either disable the check or make it a large
> number) today. A real fix will take a while longer.

I have committed a change (to the Opensync SVN trunk) which disables the
pending limit completely so builds from trunk should now allow syncml to
work. This will break timeout handling so large syncs (typically 100 or more
items) may see timeout errors!

Michael and I talked about the problem on IRC and he is looking into a medium
term workround in libsyncml. I am looking into a longer term fix that will
require changes in opensync and in the plugin.

In the meantime, if anyone wants syncml to work either build from trunk or
just comment out the call to osync_queue_set_pending_limit in
osync_client_set_incoming_queue in opensync/client/opensync_client.c.

If Michael (or anyone else) wants to re-enable the pending limit for testing
his fix, just re-enable that call to osync_queue_set_pending_limit.

Graham

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: syncing events with SE K550i

2009-09-29T15:10:21Z

Hi,

On Tuesday 29 September 2009 12:44 you wrote:
> Hi,
>
> is there a way to sync events with the Sony Ericsson K550i? All I get
> if this:
>
> $ osynctool --sync tel
> Synchronizing group "tel"
> The previous synchronization was unclean. Slow-syncing
> Main sink of member 3 of type syncml-obex-client just connected

I have not done it in a while, but I had success syncing my K550i with the
irmc plugin instead of syncml-obex. I believe to remember that somehow you
have to exclude the notes data type, too (although I could confuse that
with my Windows Mobile (synce) device).

That was some months ago with opensync-0.22. I currently have no access to
look at the configuration used back then.

Sorry for the incomplete information, but I hope it helps.

Ben

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: syncing events with SE K550i

2009-09-29T14:40:19Z

On Tue, Sep 29, 2009 at 22:34:54 +0200, Christopher Stender wrote:
> Am Tuesday 29 September 2009 21:44:16 schrieb Tino Keitel:
> > Hi,
> >
> > is there a way to sync events with the Sony Ericsson K550i?
>
> Please try "<Name>Agenda</Name>" instead of "<Name>Calendar</Name>".

This doesn't change anything.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: syncing events with SE K550i

2009-09-29T13:34:54Z

Am Tuesday 29 September 2009 21:44:16 schrieb Tino Keitel:
> Hi,
>
> is there a way to sync events with the Sony Ericsson K550i?

Please try "<Name>Agenda</Name>" instead of "<Name>Calendar</Name>".

Best,
Christopher
--
Christopher Stender, R&D Preload Department
SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg)
Maxfeldstraße 5, 90409 Nürnberg, Germany

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

signature.asc (204 bytes) Download Attachment

syncing events with SE K550i

2009-09-29T12:44:16Z

Hi,

is there a way to sync events with the Sony Ericsson K550i? All I get
if this:

$ osynctool --sync tel
Synchronizing group "tel"
The previous synchronization was unclean. Slow-syncing
Main sink of member 3 of type syncml-obex-client just connected
contact sink of member 1 of type evo2-sync just connected
event sink of member 1 of type evo2-sync just connected
Main sink of member 1 of type evo2-sync just connected
event sink of member 3 of type syncml-obex-client just connected
contact sink of member 3 of type syncml-obex-client had an error:
Timeout.
The sync failed: At least one object engine failed while connecting.
Aborting
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/plugin/opensync_context.c:164:E:osync_context_report_slowsync:
/ Assertion "context" failed
Aborted (core dumped)

Just contacts work fine. If I add an event resource to
syncml-obex-client.conf, the above error occurs.

Regards,
Tino

<?xml version="1.0"?>
<config version="1.0">
<AdvancedOptions>
<AdvancedOption>
<DisplayName>WBXML compression</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>WBXML</Name>
<Type>bool</Type>
<Value>5</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>SyncML Version</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>SANVersion</Name>
<Type>string</Type>
<ValEnum>1.2</ValEnum>
<ValEnum>1.1</ValEnum>
<ValEnum>1.0</ValEnum>
<Value>1.1</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Command</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATCommand</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Identifier</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>Identifier</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Manufacturer</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATManufacturer</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Model</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATModel</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Only Replace (never send ADD command)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>OnlyReplace</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use local time</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseLocaltime</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use String Tables</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseStringTable</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Max Message Size (SyncML: MaxMsgSize)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>MaxMsgSize</Name>
<Type>uint</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Max Object Size (SyncML: MaxObjSize)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>MaxObjSize</Name>
<Type>uint</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use Timestamp Anchor</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseTimeAnchor</Name>
<Type>bool</Type>
<Value>1</Value>
</AdvancedOption>
</AdvancedOptions>
<Authentication>
<Username></Username>
<Password></Password>
</Authentication>
<Connection>
<ActiveConnection>Bluetooth</ActiveConnection>
<Bluetooth>
<MAC>00:1C:A4:BA:26:68</MAC>
<RFCommChannel>1</RFCommChannel>
<SDPUUID>00000002-0000-1000-8000-0002ee000002</SDPUUID>
</Bluetooth>
<USB>
<VendorID>0fce</VendorID>
<ProductID>d069</ProductID>
</USB>
</Connection>
<Resources>
<Resource>
<Enabled>1</Enabled>
<Formats>
<Format>
<Name>vcard21</Name>
</Format>
</Formats>
<Name>Contacts</Name>
<ObjType>contact</ObjType>
</Resource>
<Resource>
<Enabled>1</Enabled>
<Formats>
<Format>
<Name>vevent10</Name>
</Format>
</Formats>
<Name>Calendar</Name>
<ObjType>event</ObjType>
</Resource>
</Resources>
</config>

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-29T04:40:16Z

On Tuesday 29 September 2009 12:01:18 Michael Bell wrote:
> This bug exists for a long time and I think that the limit is not
> configurable today. So the bug must be fixed (e.g. by a configurable
> limit which is much bigger than 5 by default).

I will check in a workround (either disable the check or make it a large
number) today. A real fix will take a while longer.

Graham

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-29T04:00:44Z

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Tino,

Tino Keitel wrote:
>
> finally, I figured out how to transfer new contacts to the phone. It
> looks like there is some kind of limit. If I add just 3 contacts and
> not over 100, it works. I also tried with 10 and 5 contacts, but
> osynctool still hangs.
>
> Can I enforce this limit in the config file somehow?

This is an old bug of OpenSync internal change handling.

OpenSync's engine has an internal pendingLimit for the number of changes
which are pushed to a plugin. If this limit is reached then OpenSync
waits until at minimum one change is committed.

libsyncml as SyncML implementation only sends a message if the message
is full in terms of MaxMsgSize. This is usually a limit of the phone.

So if the limit of the phone (MaxMsgSize) would allow to pack 6 changes
in a message and the pendingLimit of OpenSync is 5 then there is a dead
lock. OpenSync waits for a commit signal for at minimum one change and
libsyncml waits for the next change.

This bug exists for a long time and I think that the limit is not
configurable today. So the bug must be fixed (e.g. by a configurable
limit which is much bigger than 5 by default).

Actually I'm not able to fix it because my actual knowledge of the
related OpenSync code is too small :(

Best regards

Michael
- --
___________________________________________________________________

Michael Bell Humboldt-Universitaet zu Berlin

Tel.: +49 (0)30-2093 2482 ZE Computer- und Medienservice
Fax: +49 (0)30-2093 2704 Unter den Linden 6
michael.bell@... D-10099 Berlin
___________________________________________________________________

PGP Fingerprint: 09E4 3D29 4156 2774 0F2C C643 D8BD 1918 2030 5AAB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrB6PsACgkQ2L0ZGCAwWquVNQCfcqpnMFEAlEopRyT9zegJl5KW
efAAoJ1yXRlyDh4dfMuHtgT4skZLKX+j
=5uRo
-----END PGP SIGNATURE-----

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Segfault at slow sync

2009-09-29T01:54:19Z

Hi,

I get a segmentation fault in opensync 0.39 when running
osynctool --sync tel --conflict 1:

Synchronizing group "tel"
The previous synchronization was unclean. Slow-syncing
Main sink of member 3 of type syncml-obex-client just connected
contact sink of member 1 of type evo2-sync just connected
Main sink of member 1 of type evo2-sync just connected
contact sink of member 3 of type syncml-obex-client just connected
All clients connected or error
Main sink of member 3 of type syncml-obex-client just sent all changes
Received an entry pas-id-4AC1C32100000025 (xmlformat-contact) from
member 1 (evo2-sync). Changetype ADDED
Received an entry pas-id-4AC1C3210000002E (xmlformat-contact) from
member 1 (evo2-sync). Changetype ADDED
...
Received an entry pas-id-4AC1C32200000063 (xmlformat-contact) from
member 1 (evo2-sync). Changetype ADDED
Received an entry pas-id-4AC1C3220000006C (xmlformat-contact) from
member 1 (evo2-sync). Changetype ADDED
contact sink of member 1 of type evo2-sync just sent all changes
Main sink of member 1 of type evo2-sync just sent all changes
Received an entry 890 (xmlformat-contact) from member 3
(syncml-obex-client). Changetype ADDED
Received an entry 861 (xmlformat-contact) from member 3
(syncml-obex-client). Changetype ADDED
...
Received an entry 918 (xmlformat-contact) from member 3
(syncml-obex-client). Changetype ADDED
Received an entry 899 (xmlformat-contact) from member 3
(syncml-obex-client). Changetype ADDED
contact sink of member 3 of type syncml-obex-client just sent all
changes
All clients sent changes or error
Conflict for Mapping 0x7f68a010fe40: Solving conflict
Conflict for Mapping 0x7f68a0138a50: Solving conflict
...
Conflict for Mapping 0x7f68a0148200: Solving conflict
Conflict for Mapping 0x7f68a0148340: Solving conflict
All changes got mapped
All conflicts have been reported
All changes got multiplied
Segmentation fault (core dumped)

Here is the backtrace, I hope it is usefull:

(gdb) bt
#0 xmlDocDumpFormatMemoryEnc__internal_alias
# (out_doc=0x540a0d3b3b3b616f, doc_txt_ptr=0x7f68ab589c48,
doc_txt_len=0x7f68ab589c54, txt_encoding=0x0, format=1) at
xmlsave.c:2202
#1 0x00007f68b5b38784 in osync_xmlformat_assemble (xmlformat=<value
# optimized out>, buffer=0x7f68ab589c48,
size=0x7f68ab589c54, error=<value optimized out>)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/xmlformat/opensync_xmlformat.c:251
#2 0x00007f68b330c08a in conv_xmlformat_to_vcard (
input=0x7f68a0019e20
"BEGIN:VCARD\r\nVERSION:2.1\r\nN:Restaurant;Goa;;;\r\nTEL;WORK:08921111789\r\nEND:VCARD\r\n",
inpsize=<value optimized out>, output=0x7f68ab589ca8,
outpsize=0x7f68ab589cc0, free_input=0x7f68ab589cbc,
config=0x7f68a000c970 "", error=0x7f68ab589e80, target=0)
at
/home/scratch2/src/opensync/0.39/libopensync-plugin-vformat-0.39/src/xmlformat-vcard.c:1909
#3 0x00007f68b5b14f23 in osync_converter_invoke (converter=0x7d6dc0,
/data=0x7f68a0062250, config=0x7f68a000c970 "",
error=0x7f68ab589e80) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/format/opensync_converter.c:193
#4 0x00007f68b5b1660c in osync_format_env_convert (env=<value
/optimized out>, path=0x7f68a0071f00, data=0x7f68a0062250,
error=0x7f68ab589e80) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/format/opensync_format_env.c:1213
#5 0x00007f68b5b0f93e in osync_entry_engine_convert
/(entry_engine=0x7f68a013ea00, formatenv=0x7d3ed0,
/objtype_sink=0x62ee60,
cachedpath=0x7f68ab589db0, error=0x7f68ab589e80)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_mapping_entry_engine.c:252
#6 0x00007f68b5b1363c in osync_sink_engine_convert_to_dest
/(engine=<value optimized out>, formatenv=0x7d3ed0,
error=0x7f68ab589e80) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_sink_engine.c:196
#7 0x00007f68b5b10430 in osync_obj_engine_prepare_write
/(engine=0xcc1af0, error=0x7f68ab589e80)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_obj_engine.c:1459
#8 0x00007f68b5b12c83 in osync_obj_engine_command (engine=0xcc1af0,
/cmd=<value optimized out>, error=0x7f68ab589e80)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_obj_engine.c:1208
#9 0x00007f68b5b0bf1d in osync_engine_event (engine=0x7b3020,
/event=<value optimized out>)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:1989
#10 0x00007f68b5b0df65 in _osync_engine_generate_multiplied_event
/(objengine=<value optimized out>,
event=<value optimized out>, error=0x0, userdata=<value optimized
out>)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:1153
#11 _osync_engine_generate_event (objengine=<value optimized out>,
/event=<value optimized out>, error=0x0,
userdata=<value optimized out>) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:1481
#12 _osync_engine_event_callback (objengine=<value optimized out>,
/event=<value optimized out>, error=0x0,
userdata=<value optimized out>) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:1515
#13 0x00007f68b5b10811 in osync_obj_engine_event (engine=0xcc1af0,
/event=OSYNC_ENGINE_EVENT_MULTIPLIED, error=0x0)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_obj_engine.c:1306
#14 0x00007f68b5b12d42 in osync_obj_engine_command (engine=0xcc1af0,
/cmd=<value optimized out>, error=0x7f68ab589f68)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_obj_engine.c:1203
#15 0x00007f68b5b0d03d in osync_engine_command (engine=0x7b3020,
/command=0x7f68a02296a0)
at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:1828
#16 0x00007f68b5b0d3eb in _command_dispatch (source=<value optimized
/out>, callback=<value optimized out>,
user_data=<value optimized out>) at
/home/scratch2/src/opensync/0.39/libopensync-0.39/opensync/engine/opensync_engine.c:365
#17 0x00007f68b585612a in g_main_context_dispatch () from
//lib/libglib-2.0.so.0
#18 0x00007f68b5859988 in ?? () from /lib/libglib-2.0.so.0
#19 0x00007f68b5859e5d in g_main_loop_run () from /lib/libglib-2.0.so.0
#20 0x00007f68b587ef84 in ?? () from /lib/libglib-2.0.so.0
#21 0x00007f68b4044f9a in start_thread () from /lib/libpthread.so.0
#22 0x00007f68b559656d in clone () from /lib/libc.so.6
#23 0x0000000000000000 in ?? ()

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-28T18:09:46Z

Hi,

the limit seems to be somewhere between 2054 (hangs) and 2004 bytes
(works). Maybe 2048?

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-28T17:28:39Z

Hi,

finally, I figured out how to transfer new contacts to the phone. It
looks like there is some kind of limit. If I add just 3 contacts and
not over 100, it works. I also tried with 10 and 5 contacts, but
osynctool still hangs.

Can I enforce this limit in the config file somehow?

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-28T16:41:23Z

Hi,

here is some further information from sdptool:

$ sdptool search --bdaddr 00:1C:A4:BA:26:68 SYNCML
Searching for SYNCML on 00:1C:A4:BA:26:68 ...
Service Name: OBEX SyncML Client
Service RecHandle: 0x10001
Service Class ID List:
UUID 128: 00000002-0000-1000-8000-0002ee000002
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
"OBEX" (0x0008)

My opensync config is attached.

Any help would be appreciated.

Regards,
Tino

<?xml version="1.0"?>
<config version="1.0">
<AdvancedOptions>
<AdvancedOption>
<DisplayName>WBXML compression</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>WBXML</Name>
<Type>bool</Type>
<Value>5</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>SyncML Version</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>SANVersion</Name>
<Type>string</Type>
<ValEnum>1.2</ValEnum>
<ValEnum>1.1</ValEnum>
<ValEnum>1.0</ValEnum>
<Value>1.1</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Command</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATCommand</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Identifier</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>Identifier</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Manufacturer</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATManufacturer</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>AT Model</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>ATModel</Name>
<Type>string</Type>
<Value></Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Only Replace (never send ADD command)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>OnlyReplace</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use local time</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseLocaltime</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use String Tables</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseStringTable</Name>
<Type>bool</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Max Message Size (SyncML: MaxMsgSize)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>MaxMsgSize</Name>
<Type>uint</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Max Object Size (SyncML: MaxObjSize)</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>MaxObjSize</Name>
<Type>uint</Type>
<Value>0</Value>
</AdvancedOption>
<AdvancedOption>
<DisplayName>Use Timestamp Anchor</DisplayName>
<MaxOccurs>4294967295</MaxOccurs>
<Max>4294967295</Max>
<Name>UseTimeAnchor</Name>
<Type>bool</Type>
<Value>1</Value>
</AdvancedOption>
</AdvancedOptions>
<Authentication>
<Username></Username>
<Password></Password>
</Authentication>
<Connection>
<ActiveConnection>Bluetooth</ActiveConnection>
<Bluetooth>
<MAC>00:1C:A4:BA:26:68</MAC>
<RFCommChannel>1</RFCommChannel>
<SDPUUID>00000002-0000-1000-8000-0002ee000002</SDPUUID>
</Bluetooth>
<USB>
<VendorID>0fce</VendorID>
<ProductID>d069</ProductID>
</USB>
</Connection>
<Resources>
<Resource>
<Enabled>1</Enabled>
<Formats>
<Format>
<Name>vcard21</Name>
</Format>
</Formats>
<Name>Contacts</Name>
<ObjType>contact</ObjType>
</Resource>
</Resources>
</config>

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-28T15:32:14Z

> On Mon, Sep 28, 2009 at 22:48:47 +0200, Tino Keitel wrote:

[...]

> Hi,
>
> I forgot to mention that I use a SE k550i mobile phone. I just saw that
> reading contacts from the phone works. But as soon as opensync tries to
> write something to the phone (saving new contacts, deleting existing
> contacts) osynctool hangs.

I can also modify a contact on the phone, run osynctool --sync, and the
modified contact will be transfered into evolution.

I can also copy the vcf file with all the contacts to the phone using
gnome-obex-send. Only opensync fails.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: osynctool --sync hangs when using bluetooth

2009-09-28T15:18:18Z

On Mon, Sep 28, 2009 at 22:48:47 +0200, Tino Keitel wrote:

> Hi,
>
> I set up a sync group with evo2-sync and file-sync members, and syncing
> worked.
>
> Then I modified the setup to sync evo2-plugin and syncml-obex-client
> over bluetooth. Then I get this output:
>
> --------------------------------------------------------------------
> ...
> Received an entry pas-id-4AC0E6910000005B (xmlformat-contact) from
> member 1 (evo2-sync). Changetype ADDED
> contact sink of member 1 of type evo2-sync just sent all changes
> Main sink of member 1 of type evo2-sync just sent all changes
> contact sink of member 3 of type syncml-obex-client just sent all
> changes
> All clients sent changes or error
> All changes got mapped
> All conflicts have been reported
> All changes got multiplied
> All changes got prepared for write
>
> Synchronization Forecast Summary:
>
> ObjType: contact
> Member 1: Adding(0) Modifying(0) Deleting(0)
> Member 3: Adding(103) Modifying(0) Deleting(0)
>
> Do you want to continue the synchronization? (N/y): y
>
> OK! Completing synchronization!
> contact sink of member 1 of type evo2-sync committed all changes.
> Main sink of member 1 of type evo2-sync committed all changes.
> -------------------------------------------------------------------
>
> If I type "y", osynctool hangs, and no bluetooth traffic can be seen in
> hcidump. When I try to open the contact list, it gives an error about

Hi,

I forgot to mention that I use a SE k550i mobile phone. I just saw that
reading contacts from the phone works. But as soon as opensync tries to
write something to the phone (saving new contacts, deleting existing
contacts) osynctool hangs.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

osynctool --sync hangs when using bluetooth

2009-09-28T13:48:47Z

Hi,

I set up a sync group with evo2-sync and file-sync members, and syncing
worked.

Then I modified the setup to sync evo2-plugin and syncml-obex-client
over bluetooth. Then I get this output:

--------------------------------------------------------------------
...
Received an entry pas-id-4AC0E6910000005B (xmlformat-contact) from
member 1 (evo2-sync). Changetype ADDED
contact sink of member 1 of type evo2-sync just sent all changes
Main sink of member 1 of type evo2-sync just sent all changes
contact sink of member 3 of type syncml-obex-client just sent all
changes
All clients sent changes or error
All changes got mapped
All conflicts have been reported
All changes got multiplied
All changes got prepared for write

Synchronization Forecast Summary:

ObjType: contact
Member 1: Adding(0) Modifying(0) Deleting(0)
Member 3: Adding(103) Modifying(0) Deleting(0)

Do you want to continue the synchronization? (N/y): y

OK! Completing synchronization!
contact sink of member 1 of type evo2-sync committed all changes.
Main sink of member 1 of type evo2-sync committed all changes.
-------------------------------------------------------------------

If I type "y", osynctool hangs, and no bluetooth traffic can be seen in
hcidump. When I try to open the contact list, it gives an error about
another application which uses the contact list. This error goes away
if I abort osynctool.

Member 1 is evolution, member 3 is the mobile phone. I use opensync
0.39.

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Can OpenSync sync two hsqldb schemas

2009-09-27T14:21:24Z

Can OpenSync (or SyncML) be used to sync two hsqldb databases?

We are seeking a free or commercial product / api / tool that can be
embedded
into a desktop Java app to sync two HSQLDB databases and handle complex
rules
and would like to know if OpenSync is up to the task.

The hsqldb DB has about a dozen tables in a relational schema.

---
Summary:

We have a desktop application that uses the db on the back end to store
info and have some unique syncing problems.

The user has the ability to install the app, do some stuff that puts
data into the local db (call this Client A) and then sync to a central
server, which merely puts the db file on the server (puts the db file
into a column on production database)

The user then has the ability to go to another computer, install the
app, and if the user has an account and logs in, it will download the db
file from a server (where it was put by Client A in the step above)

The user may run either client in offline mode where data is changed at
any point, such that local changes do not get sync'd to the server (but
at some point in the future may get sync'd)

---
What we want to do is handle all cases where Client A (that has been in
offline mode for some time and has made many local changes) gets data
from a recent sync from Client B and handles everything correctly.

At first look this will require a lot of programming to do this, and we
would like to know if there is a tool or product out there that will do
what we need to do.

Is there a tool that can be used to sync between the two databases
(through using a central always on server) when only one app can be
active at any time and handle the offline scenarios?

---
Simply fetching the database files each time a client launches is not an
option, because of the "offline mode" where Client A may have some data
that was added or changed offline (at a later date than the last sync)
so if we get the db file from the server it will erase those changes.

We need to handle complex cases like

Client A: (online mode)
launch and add some data
sync the db file to the server
close client A

Client B: (online mode)
launch the app and get latest data file from the server
add some data
* rename an item
sync the new data to the server

Client A: (offline mode)
launch the app, can not sync from server because offline
* rename the same item as above (so this is the latest rename)
Now sync from the server

Expected: Do not want to get the item renamed as set from Client B,
but should be the rename from Client A, after the sync.

For this reason we can not simply download the latest db file from
the server and use it.

We have to do a merge of the db files but handle changes according
to a time stamp, and only merge changes that are the most recent changes.

There will be collisions and conflicts that we have to resolve and
this looks like a complex programming problem.

If anyone has any idea on free or commercial products that can be
embedded into a Java app to sync two hsqldb databases and handle complex
rules, please
drop me a line.

We have a few ideas, but want to explore all options.

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Re: OpenSync release 0.39

2009-09-23T05:33:58Z

On Mon, Sep 21, 2009 at 18:38:37 +0200, Bj?oern Ricks wrote:
> Hi everyone,
>
> after a long time we finally released OpenSync 0.39. This will be the

Great!

Is there any documentation for the vformat plugin? At least I'd like to
know what I can expect from it. I have a large .vcf file with contacts,
and a .ics file with dates, which I'd like to sync with by cellphone.
Can I use these files with the libvformat plugin? If yes, how do I set
it up?

Regards,
Tino

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users

Nabble - Opensync - User

Invitation to connect on LinkedIn

LinkedIn

Re: collaboration proposal

collaboration proposal

Re: [SPAM] I'm in desperate need for a guide

Re: [SPAM] I'm in desperate need for a guide

[SPAM] I'm in desperate need for a guide

Re: libsyncml failure with N97

Assertion fail in smlDataSyncMappingCallback

Re: libsyncml failure with N97

libsyncml failure with N97

Re: OT: Reset Nokia 5800 Was: Did opensync kill mynokia 5800 ?

OT: Reset Nokia 5800 Was: Did opensync kill my nokia 5800 ?

Re: syncml-ds-tool to sync Nokia 5800 does not work as expected

Re: syncml-ds-tool to sync Nokia 5800 does not work as expected

Did opensync kill my nokia 5800 ?

syncml-ds-tool to sync Nokia 5800 does not work as expected

Re: libsyncml and the syncml plugin

libsyncml and the syncml plugin

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

Re: syncing events with SE K550i

Re: syncing events with SE K550i

Re: syncing events with SE K550i

syncing events with SE K550i

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

Segfault at slow sync

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

Re: osynctool --sync hangs when using bluetooth

osynctool --sync hangs when using bluetooth

Can OpenSync sync two hsqldb schemas

Re: OpenSync release 0.39