|

Overo Fire bluetooth not working

View: New views

10 Messages — Rating Filter: Alert me

	Overo Fire bluetooth not working by George Zapantes :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Some parts of this message have been removed. Learn more about Nabble's security policy. Hi. I have an overo Fire on a Summit expansion board. Bluetooth fails with the following message: Starting Bluetooth subsystem: Initialization timed out. This happened with the image the module came with. I tried building an image, as well as using latest images but the same happened with all of them. In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there is no /proc/gpio. I am not sure whether this has to do with the bluetooth failure or if it is another problem. Any help is welcomed! Thank you George Zapantes ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Fire bluetooth not working by Thad :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Some parts of this message have been removed. Learn more about Nabble's security policy. Hey George, If you check the mailing list archives you’ll find this is an issue a few of us have been dealing with, but it seems to only happen on a few boards. At this point in time I think the only solution is to RMA the board and try again. -Thad From: George Zapantes [mailto:gzapantes@...] Sent: Friday, July 03, 2009 11:55 AM To: Gumstix users Subject: [Gumstix-users] Overo Fire bluetooth not working Hi. I have an overo Fire on a Summit expansion board. Bluetooth fails with the following message: Starting Bluetooth subsystem: Initialization timed out. This happened with the image the module came with. I tried building an image, as well as using latest images but the same happened with all of them. In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there is no /proc/gpio. I am not sure whether this has to do with the bluetooth failure or if it is another problem. Any help is welcomed! Thank you George Zapantes ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Fire bluetooth not working by George Zapantes :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Some parts of this message have been removed. Learn more about Nabble's security policy. Thanks Thad. Frankly, I saw that post. I though I do another post and see if anything new was up. The thing that worried me is that there is no /proc/gpio in the image I built, neither on the ready images and I was thinking whether this is related to the bluetooth issue. Does anyone know whether there should be a /proc/gpio? I do not have the proc_gpio module either to load. I will be getting 5-6 more, so I will be able to see if indeed it is a bad board. At the moment I am waiting because there is no stock. Best regards GZ From: Thad Thompson <TThompson@...> To: General mailing list for gumstix users. <gumstix-users@...> Sent: Friday, July 3, 2009 7:12:33 PM Subject: Re: [Gumstix-users] Overo Fire bluetooth not working Hey George, If you check the mailing list archives you’ll find this is an issue a few of us have been dealing with, but it seems to only happen on a few boards. At this point in time I think the only solution is to RMA the board and try again. -Thad From: George Zapantes [mailto:gzapantes@...] Sent: Friday, July 03, 2009 11:55 AM To: Gumstix users Subject: [Gumstix-users] Overo Fire bluetooth not working Hi. I have an overo Fire on a Summit expansion board. Bluetooth fails with the following message: Starting Bluetooth subsystem: Initialization timed out. This happened with the image the module came with. I tried building an image, as well as using latest images but the same happened with all of them. In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there is no /proc/gpio. I am not sure whether this has to do with the bluetooth failure or if it is another problem. Any help is welcomed! Thank you George Zapantes ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Fire bluetooth not working by Chris Dollar :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message /proc/gpio is for the PXA2xx based gumstix boards (like the connex, basix, and verdex), not for the overo (omap3 based). Nothing to worry about :) Chris On Fri, Jul 3, 2009 at 10:26 AM, George Zapantes<gzapantes@...> wrote: > Thanks Thad. > > Frankly, I saw that post. I though I do another post and see if anything new > was up. The thing that worried me is that there is no /proc/gpio in the > image I built, neither on the ready images and I was thinking whether this > is related to the bluetooth issue. Does anyone know whether there should be > a /proc/gpio? I do not have the proc_gpio module either to load. > > I will be getting 5-6 more, so I will be able to see if indeed it is a bad > board. At the moment I am waiting because there is no stock. > > Best regards > GZ > > > ________________________________ > From: Thad Thompson <TThompson@...> > To: General mailing list for gumstix users. > <gumstix-users@...> > Sent: Friday, July 3, 2009 7:12:33 PM > Subject: Re: [Gumstix-users] Overo Fire bluetooth not working > > Hey George, > > If you check the mailing list archives you’ll find this is an issue a few of > us have been dealing with, but it seems to only happen on a few boards. At > this point in time I think the only solution is to RMA the board and try > again. > > > > -Thad > > > > From: George Zapantes [mailto:gzapantes@...] > Sent: Friday, July 03, 2009 11:55 AM > To: Gumstix users > Subject: [Gumstix-users] Overo Fire bluetooth not working > > > > > > Hi. > > I have an overo Fire on a Summit expansion board. > > Bluetooth fails with the following message: > > Starting Bluetooth subsystem: > Initialization timed out. > > This happened with the image the module came with. I tried building an > image, as well as using latest images but the same happened with all of > them. > > In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there > is no /proc/gpio. I am not sure whether this has to do with the bluetooth > failure or if it is another problem. > > Any help is welcomed! > > Thank you > George Zapantes > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > gumstix-users mailing list > gumstix-users@... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Fire bluetooth not working by Thad :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Some parts of this message have been removed. Learn more about Nabble's security policy. George, I guessing here, but I believe the /proc/gpio interface you’re referring to was exposed on a different class of gumstix boards (the verdex perhaps?). Many of the gpio lines in the Overo kernel are exposed in sysfs at /sys/class/gpio I believe that GPIO 164 is tied to the Bluetooth reset if that’s what you were looking for. However, in the case that you have a working Bluetooth I think it should just come up operational when hciattach runs. -Thad From: George Zapantes [mailto:gzapantes@...] Sent: Friday, July 03, 2009 12:27 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] Overo Fire bluetooth not working Thanks Thad. Frankly, I saw that post. I though I do another post and see if anything new was up. The thing that worried me is that there is no /proc/gpio in the image I built, neither on the ready images and I was thinking whether this is related to the bluetooth issue. Does anyone know whether there should be a /proc/gpio? I do not have the proc_gpio module either to load. I will be getting 5-6 more, so I will be able to see if indeed it is a bad board. At the moment I am waiting because there is no stock. Best regards GZ From: Thad Thompson <TThompson@...> To: General mailing list for gumstix users. <gumstix-users@...> Sent: Friday, July 3, 2009 7:12:33 PM Subject: Re: [Gumstix-users] Overo Fire bluetooth not working Hey George, If you check the mailing list archives you’ll find this is an issue a few of us have been dealing with, but it seems to only happen on a few boards. At this point in time I think the only solution is to RMA the board and try again. -Thad From: George Zapantes [mailto:gzapantes@...] Sent: Friday, July 03, 2009 11:55 AM To: Gumstix users Subject: [Gumstix-users] Overo Fire bluetooth not working Hi. I have an overo Fire on a Summit expansion board. Bluetooth fails with the following message: Starting Bluetooth subsystem: Initialization timed out. This happened with the image the module came with. I tried building an image, as well as using latest images but the same happened with all of them. In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there is no /proc/gpio. I am not sure whether this has to do with the bluetooth failure or if it is another problem. Any help is welcomed! Thank you George Zapantes ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Fire bluetooth not working by George Zapantes :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Some parts of this message have been removed. Learn more about Nabble's security policy. Nice to hear that. Thank you Chris! From: Chris Dollar <chris.dollar@...> To: General mailing list for gumstix users. <gumstix-users@...> Sent: Friday, July 3, 2009 7:38:07 PM Subject: Re: [Gumstix-users] Overo Fire bluetooth not working /proc/gpio is for the PXA2xx based gumstix boards (like the connex, basix, and verdex), not for the overo (omap3 based). Nothing to worry about :) Chris On Fri, Jul 3, 2009 at 10:26 AM, George Zapantes<gzapantes@...> wrote: > Thanks Thad. > > Frankly, I saw that post. I though I do another post and see if anything new > was up. The thing that worried me is that there is no /proc/gpio in the > image I built, neither on the ready images and I was thinking whether this > is related to the bluetooth issue. Does anyone know whether there should be > a /proc/gpio? I do not have the proc_gpio module either to load. > > I will be getting 5-6 more, so I will be able to see if indeed it is a bad > board. At the moment I am waiting because there is no stock. > > Best regards > GZ > > > ________________________________ > From: Thad Thompson <TThompson@...> > To: General mailing list for gumstix users. > <gumstix-users@...> > Sent: Friday, July 3, 2009 7:12:33 PM > Subject: Re: [Gumstix-users] Overo Fire bluetooth not working > > Hey George, > > If you check the mailing list archives you’ll find this is an issue a few of > us have been dealing with, but it seems to only happen on a few boards. At > this point in time I think the only solution is to RMA the board and try > again. > > > > -Thad > > > > From: George Zapantes [mailto:gzapantes@...] > Sent: Friday, July 03, 2009 11:55 AM > To: Gumstix users > Subject: [Gumstix-users] Overo Fire bluetooth not working > > > > > > Hi. > > I have an overo Fire on a Summit expansion board. > > Bluetooth fails with the following message: > > Starting Bluetooth subsystem: > Initialization timed out. > > This happened with the image the module came with. I tried building an > image, as well as using latest images but the same happened with all of > them. > > In the users WiKi How-To: Bluettoth it mentions GPIOs. I noticed that there > is no /proc/gpio. I am not sure whether this has to do with the bluetooth > failure or if it is another problem. > > Any help is welcomed! > > Thank you > George Zapantes > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > gumstix-users mailing list > gumstix-users@... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Overo Air antennae by Bruce Bernstein :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Does anyone know about the antennae configuration on the Overo Air? Is one for BT and one for WiFi? If so, which is which? Bruce ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Air antennae by Chris Dollar :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message See here: http://www.gumstix.net/Software/view/Software-Overo/Getting-started/111.html Chris On Fri, Jul 3, 2009 at 4:19 PM, Bruce Bernstein<bruce.bernstein@...> wrote: > Does anyone know about the antennae configuration on the Overo Air? Is > one for BT and one for WiFi? If so, which is which? > Bruce > > ------------------------------------------------------------------------------ > _______________________________________________ > gumstix-users mailing list > gumstix-users@... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Air antennae by Joe2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message To head off the next question, The antenna should be the same. Both are 2.4 Ghz. If you look at the photo you can see that with the antenna ports to the left the wifi is on top and the BT is on bottom. Chris Dollar wrote: See here: http://www.gumstix.net/Software/view/Software-Overo/Getting-started/111.html Chris On Fri, Jul 3, 2009 at 4:19 PM, Bruce Bernstein<bruce.bernstein@dartdevices.com> wrote: > Does anyone know about the antennae configuration on the Overo Air? Is > one for BT and one for WiFi? If so, which is which? > Bruce > > ------------------------------------------------------------------------------ > _______________________________________________ > gumstix-users mailing list > gumstix-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gumstix-users > ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gumstix-users
	Re: Overo Air antennae by Dirk Behme-2 :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Chris Dollar wrote: > See here: http://www.gumstix.net/Software/view/Software-Overo/Getting-started/111.html ... and here: http://gumstix.net/wiki/index.php?title=Overo_Wifi#Connector Dirk > On Fri, Jul 3, 2009 at 4:19 PM, Bruce > Bernstein<bruce.bernstein@...> wrote: >> Does anyone know about the antennae configuration on the Overo Air? Is >> one for BT and one for WiFi? If so, which is which? >> Bruce ------------------------------------------------------------------------------ _______________________________________________ gumstix-users mailing list gumstix-users@... https://lists.sourceforge.net/lists/listinfo/gumstix-users