|

»

PPC & 3d support

View: New views

9 Messages — Rating Filter: Alert me

	PPC & 3d support by Larry Stotler :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Does anyone know why there isn't any 3d support under PPC? Thanx --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Olaf Hering :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Mon, Jun 09, Larry Stotler wrote: > Does anyone know why there isn't any 3d support under PPC? Thanx This depends on the graphics card. radeon and r128 cards should work, but only sax2 does not allow 3D in the xorg.conf file. Add 'Load "dri"' to the Module section in /etc/X11/xorg.conf --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Peter Czanik :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Larry Stotler írta: > Does anyone know why there isn't any 3d support under PPC? Thanx > It is just sax2, which does not know about it. At least if you have a radeon, then adding load "dri" to /etc/X11/xorg.conf will enable 3d. Bye, CzP --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Larry Stotler :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Tue, Jun 10, 2008 at 2:22 AM, Olaf Hering <olh@...> wrote: > This depends on the graphics card. radeon and r128 cards should work, > but only sax2 does not allow 3D in the xorg.conf file. > Add 'Load "dri"' to the Module section in /etc/X11/xorg.conf My Powerbook, which has a Rage Pro Lt(and has support for DRI from the website) has the following section: Section "DRI" Group "video" Mode 0660 EndSection Is there anything more that I need to do? Thanx --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Larry Stotler :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Tue, Jun 10, 2008 at 2:26 AM, Peter Czanik <pczanik@...> wrote: > It is just sax2, which does not know about it. Why does SaX2/PPC not work with 3d? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Manfred Tremmel :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Am Dienstag, 10. Juni 2008 schrieb Larry Stotler: > On Tue, Jun 10, 2008 at 2:26 AM, Peter Czanik <pczanik@...> wrote: > > It is just sax2, which does not know about it. > > Why does SaX2/PPC not work with 3d? It's not only on PPC, even on x86 or x86_64, all Radeons > 9250 have to be activated manually by adding the entry into the xorg.conf. -- Machs gut \| http://www.iivs.de/schwinde/buerger/tremmel/ \| http://packman.links2linux.de/ Manfred \| http://www.knightsoft-net.de --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Larry Stotler :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Tue, Jun 10, 2008 at 5:14 PM, Manfred Tremmel <Manfred.Tremmel@...> wrote: > It's not only on PPC, even on x86 or x86_64, all Radeons > 9250 have to > be activated manually by adding the entry into the xorg.conf. Again, why? Since I don't have many ATI cards, I have never ran into this problem. I generally have used nVidia cards. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Manfred Tremmel :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Am Dienstag, 10. Juni 2008 schrieb Larry Stotler: > On Tue, Jun 10, 2008 at 5:14 PM, Manfred Tremmel <Manfred.Tremmel@...> wrote: > > It's not only on PPC, even on x86 or x86_64, all Radeons > 9250 > > have to be activated manually by adding the entry into the > > xorg.conf. > > Again, why? Since I don't have many ATI cards, I have never ran into > this problem. I don't know, maybe SUSE thinks it's not stable. The 3D support for R200 chips is included for a very long time, but R300 is only available since a view X.org versions. > I generally have used nVidia cards. Than you can be sure not to have 3D support without proprietary drivers (which are not available for ppc). -- Machs gut \| http://www.iivs.de/schwinde/buerger/tremmel/ \| http://packman.links2linux.de/ Manfred \| http://www.knightsoft-net.de --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...
	Re: PPC & 3d support by Larry Stotler :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Wed, Jun 11, 2008 at 2:42 PM, Manfred Tremmel <Manfred.Tremmel@...> wrote: > I don't know, maybe SUSE thinks it's not stable. The 3D support for R200 > chips is included for a very long time, but R300 is only available > since a view X.org versions. The newest card I have is a Radeon 7000. Between the Mac64 and Rage Pro's, this is the biggest ATI experience I have had. > Than you can be sure not to have 3D support without proprietary drivers > (which are not available for ppc). Good point. Forgot about that. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@... For additional commands, e-mail: opensuse-ppc+help@...