Problem in setting CAN ID filter

[folgli]

Hello,

I have a problem with setting the CAN ID filter. I use four 16 bit filter. I want to set one filter now.

    CAN0IDMR0 = 0xFF;
    CAN0IDAR0 = 0x00;
    CAN0IDMR1 = 0x18;
    CAN0IDAR1 = 0x08;
    CAN0IDMR2 = 0x00;
    CAN0IDAR2 = 0x00;
    CAN0IDMR3 = 0x00;
    CAN0IDAR3 = 0x00;
    CAN0IDMR4 = 0x00;
    CAN0IDAR4 = 0x00;
    CAN0IDMR5 = 0x00;
    CAN0IDAR5 = 0x00;
    CAN0IDMR6 = 0x00;
    CAN0IDAR6 = 0x00;
    CAN0IDMR7 = 0x00;
    CAN0IDAR7 = 0x00;
    CAN0IDAC |= 0x01;  

I want that only messages with ID 001 can be received. But it does not work. I can receive messages with ID 000 but not with 001. I had a look at the manual but I do not know what I am doing wrong. Perhaps someone can tell me.

Thank you very much.

Best regards

[yadunandan kasu]

Hello,
 
Inorder to receive only message with CAN ID "0x001", set the Mask and Acceptance registers as shown below.
 
CAN0IDMR0 = 0x00;
CAN0IDMR1 = 0x00;
 
CAN0IDAR0 = 0x00;
CAN0IDAR2 = 0x20;
 
Try the above settings, I hope this helps you./..


 
 
          regards
Yadunandan Kasu(Nandu)

--- On Wed, 11/3/09, folgli@... <folgli@...> wrote:


From: folgli@... <folgli@...>
Subject: [68HC12] Problem in setting CAN ID filter
To: 68hc12@...
Date: Wednesday, 11 March, 2009, 9:30 PM






Hello,

I have a problem with setting the CAN ID filter. I use four 16 bit filter. I want to set one filter now.

CAN0IDMR0 = 0xFF;
CAN0IDAR0 = 0x00;
CAN0IDMR1 = 0x18;
CAN0IDAR1 = 0x08;
CAN0IDMR2 = 0x00;
CAN0IDAR2 = 0x00;
CAN0IDMR3 = 0x00;
CAN0IDAR3 = 0x00;
CAN0IDMR4 = 0x00;
CAN0IDAR4 = 0x00;
CAN0IDMR5 = 0x00;
CAN0IDAR5 = 0x00;
CAN0IDMR6 = 0x00;
CAN0IDAR6 = 0x00;
CAN0IDMR7 = 0x00;
CAN0IDAR7 = 0x00;
CAN0IDAC |= 0x01;

I want that only messages with ID 001 can be received. But it does not work.. I can receive messages with ID 000 but not with 001. I had a look at the manual but I do not know what I am doing wrong. Perhaps someone can tell me..

Thank you very much.

Best regards

















      Cricket on your mind? Visit the ultimate cricket website. Enter http://beta.cricket.yahoo.com

[Non-text portions of this message have been removed]

[folgli]

> Hello,

> Inorder to receive only message with CAN ID "0x001", set the Mask and
> Acceptance registers as shown below.

> CAN0IDMR0 = 0x00;
> CAN0IDMR1 = 0x00;

> CAN0IDAR0 = 0x00;
> CAN0IDAR2 = 0x20;

> Try the above settings, I hope this helps you./..

Hello,

I tried the settings but it does not work. Has anybody another idea. I had a look at the manual but I do not know what I am doing wrong. Perhaps someone could explain the structure of the filters to me, which bits are important for the different filters and so on.

Best regards

[yadunandan kasu]

Hi,
 
1. Are you writing "0xFF" to any of the mask registers i.e. CAN0IDMR0~7 ?? you should not write the value of "0xFF" to these registers in your case.
 
2. What value are setting to the register "CAN0IDAC" ?? It is recommended to set the value of "0x10", if you are using Standard message format. (i.e. message with 11-bit CAN ID)
 
Try the above settings and check. If it doesnt work.. then I think may be the problem is in your code.
 








          regards
Yadunandan Kasu(Nandu)

--- On Fri, 20/3/09, folgli@... <folgli@...> wrote:


From: folgli@... <folgli@...>
Subject: [68HC12] Re: Problem in setting CAN ID filter
To: 68hc12@...
Date: Friday, 20 March, 2009, 1:08 AM






> Hello,

> Inorder to receive only message with CAN ID "0x001", set the Mask and
> Acceptance registers as shown below.

> CAN0IDMR0 = 0x00;
> CAN0IDMR1 = 0x00;

> CAN0IDAR0 = 0x00;
> CAN0IDAR2 = 0x20;

> Try the above settings, I hope this helps you./..

Hello,

I tried the settings but it does not work. Has anybody another idea. I had a look at the manual but I do not know what I am doing wrong. Perhaps someone could explain the structure of the filters to me, which bits are important for the different filters and so on.

Best regards

















      Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/

[Non-text portions of this message have been removed]

[folgli]

Hello,

here are parts of my code:

typedef struct
{
    unsigned int IDAC;
    unsigned int CANidar0;
    unsigned int CANidmr0;
    unsigned int CANidar1;
    unsigned int CANidmr1;
    unsigned int CANidar2;
    unsigned int CANidmr2;
    unsigned int CANidar3;
    unsigned int CANidmr3;
    unsigned int CANidar4;
    unsigned int CANidmr4;
    unsigned int CANidar5;
    unsigned int CANidmr5;
    unsigned int CANidar6;
    unsigned int CANidmr6;
    unsigned int CANidar7;
    unsigned int CANidmr7;
}FILTER;

FILTER stFilter=
   {
       0x10,              // IDAC
       0x00, 0x00,        // (CANidar0, CANidmr0)
       0x00, 0x00,        // (CANidar1, CANidmr1)
       0x20, 0x00,        // (CANidar2, CANidmr2)
       0x00, 0x00,        // (CANidar3, CANidmr3)
       0x00, 0x00,        // (CANidar4, CANidmr4)
       0x00, 0x00,        // (CANidar5, CANidmr5)
       0x00, 0x00,        // (CANidar6, CANidmr6)
       0x00, 0x00         // (CANidar7, CANidmr7)  
   };


Filter(stFilter);


char Filter(FILTER fi)
{
    CAN0IDAC |= acfi.IDAC;  
                                       
    CAN0IDMR0 = acfi.CANidmr0;                                                  
    CAN0IDAR0 = fi.CANidar0;            
    CAN0IDMR1 = fi.CANidmr1;          
    CAN0IDAR1 = fi.CANidar1;          
    CAN0IDMR2 = fi.CANidmr2;          
    CAN0IDAR2 = fi.CANidar2;          
    CAN0IDMR3 = fi.CANidmr3;          
    CAN0IDAR3 = fi.CANidar3;          
    CAN0IDMR4 = fi.CANidmr4;          
    CAN0IDAR4 = fi.CANidar4;          
    CAN0IDMR5 = fi.CANidmr5;          
    CAN0IDAR5 = fi.CANidar5;          
    CAN0IDMR6 = fi.CANidmr6;          
    CAN0IDAR6 = fi.CANidar6;          
    CAN0IDMR7 = fi.CANidmr7;          
    CAN0IDAR7 = fi.CANidar7;          
}


But it does not work. I am only able to receive messages with ID 0x000. For example 0x001 or 0x002 do not work.

Best regards

[Edward Karpicz]

To ignore ID bits, corresponding DMR bits should be set to '1'. You have all
DMR's set to all zeros.
When DMRx bit is zero, then corrsponding IDRx bit should match corrsponding
DARx bit, else message won't pass.
To accept all messages simply set all DMR bits to ones.

If your code receives standard id messages with id 0, then it should receive
also 0x100. In 4x16bit filters mode (IDAC = 0x10), idar2 and idar3 form
16bit filter. If you check message buffer layout (look in datasheets for
figures Receive / Transmit Message Buffer Standard Identifier  and the same
for Extended Identifier), then you should find that 0x20 in IDR0 and 0 in
IDR1 means  message ID = ((0x20<<8) | 0x00) >> 5 = 0x100.

Edward



----- Original Message -----
From: <folgli@...>
To: <68hc12@...>
Sent: Friday, March 20, 2009 16:23
Subject: [68HC12] Re: Problem in setting CAN ID filter

> Hello,
>
> here are parts of my code:
>
> typedef struct
> {
>    unsigned int IDAC;
>    unsigned int CANidar0;
>    unsigned int CANidmr0;
>    unsigned int CANidar1;
>    unsigned int CANidmr1;
>    unsigned int CANidar2;
>    unsigned int CANidmr2;
>    unsigned int CANidar3;
>    unsigned int CANidmr3;
>    unsigned int CANidar4;
>    unsigned int CANidmr4;
>    unsigned int CANidar5;
>    unsigned int CANidmr5;
>    unsigned int CANidar6;
>    unsigned int CANidmr6;
>    unsigned int CANidar7;
>    unsigned int CANidmr7;
> }FILTER;
>
> FILTER stFilter=
>   {
>       0x10,              // IDAC
>       0x00, 0x00,        // (CANidar0, CANidmr0)
>       0x00, 0x00,        // (CANidar1, CANidmr1)
>       0x20, 0x00,        // (CANidar2, CANidmr2)
>       0x00, 0x00,        // (CANidar3, CANidmr3)
>       0x00, 0x00,        // (CANidar4, CANidmr4)
>       0x00, 0x00,        // (CANidar5, CANidmr5)
>       0x00, 0x00,        // (CANidar6, CANidmr6)
>       0x00, 0x00         // (CANidar7, CANidmr7)
>   };
>
>
> Filter(stFilter);
>
>
> char Filter(FILTER fi)
> {
>    CAN0IDAC |= acfi.IDAC;
>
>    CAN0IDMR0 = acfi.CANidmr0;
>    CAN0IDAR0 = fi.CANidar0;
>    CAN0IDMR1 = fi.CANidmr1;
>    CAN0IDAR1 = fi.CANidar1;
>    CAN0IDMR2 = fi.CANidmr2;
>    CAN0IDAR2 = fi.CANidar2;
>    CAN0IDMR3 = fi.CANidmr3;
>    CAN0IDAR3 = fi.CANidar3;
>    CAN0IDMR4 = fi.CANidmr4;
>    CAN0IDAR4 = fi.CANidar4;
>    CAN0IDMR5 = fi.CANidmr5;
>    CAN0IDAR5 = fi.CANidar5;
>    CAN0IDMR6 = fi.CANidmr6;
>    CAN0IDAR6 = fi.CANidar6;
>    CAN0IDMR7 = fi.CANidmr7;
>    CAN0IDAR7 = fi.CANidar7;
> }
>
>
> But it does not work. I am only able to receive messages with ID 0x000.
> For example 0x001 or 0x002 do not work.
>
> Best regards
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

[folgli]

Hello,

thank you very much for the detailed explication!

Best regards