Problems install debian lenny v5.0.3

Hi,

I had unslung firmware on my nslu2, but I needed 2.6 kernel (for install a wifi access point), i decided install debian...

The flashing procedure with Ugutil finished correctly but when the nslu2 reboot and when the leds sequence finish I don't receive notifications from de nslu2... (any sound or any light)... I don't have network and all the leds are off... (network led too)... Only the power led is on!!!!

I reinstalled unslung and it works fine...

I prove installed Lenny using tar ball method (Martin Michlmayr web's) but I've the same problem...

And Finally I probe install Lenny rc2 but when I access with the user installer (via ssh) and init the installation, the nslu2 not detect my pen drive.

Please help!!!!

[Martin Michlmayr]

* widfara@... <widfara@...> [2009-09-26 11:42]:
> The flashing procedure with Ugutil finished correctly but when the
> nslu2 reboot and when the leds sequence finish I don't receive
> notifications from de nslu2... (any sound or any light)... I don't
> have network and all the leds are off... (network led too)... Only
> the power led is on!!!!

I don't know about that, sorry.

> And Finally I probe install Lenny rc2 but when I access with the
> user installer (via ssh) and init the installation, the nslu2 not
> detect my pen drive.

Yep, the lenny rc2 installer definitely won't work anymore.  The
Debian installer relies on certain files on the network and so only
the _current_ version will work (i.e. 5.0.3).  Why you can boot rc2
but not 5.0.3, that I don't know. :(

--
Martin Michlmayr
http://www.cyrius.com/

--- In nslu2-linux@..., Martin Michlmayr <tbm@...> wrote:

>
> * widfara@... <widfara@...> [2009-09-26 11:42]:
> > The flashing procedure with Ugutil finished correctly but when the
> > nslu2 reboot and when the leds sequence finish I don't receive
> > notifications from de nslu2... (any sound or any light)... I don't
> > have network and all the leds are off... (network led too)... Only
> > the power led is on!!!!
>
> I don't know about that, sorry.
>
> > And Finally I probe install Lenny rc2 but when I access with the
> > user installer (via ssh) and init the installation, the nslu2 not
> > detect my pen drive.
>
> Yep, the lenny rc2 installer definitely won't work anymore.  The
> Debian installer relies on certain files on the network and so only
> the _current_ version will work (i.e. 5.0.3).  Why you can boot rc2
> but not 5.0.3, that I don't know. :(
>
> --
> Martin Michlmayr
> http://www.cyrius.com/
>

Hi Martin, I installed rc2 because 3.0.5 not works on my nslu2...

It's possible install another debian version and update it to 5.0.3???

Or if I install unslung, I'll can pass to debian lenny???

Thanks!!!

[Martin Michlmayr]

* widfara@... <widfara@...> [2009-09-26 14:29]:
> Hi Martin, I installed rc2 because 3.0.5 not works on my nslu2...
>
> It's possible install another debian version and update it to 5.0.3???

No, I'm afraid you can only install the current version (5.0.3).

--
Martin Michlmayr
http://www.cyrius.com/