I've searched for crimpers in the past for various brands/models of
similar connectors, and the manufactuers make them, but they are
*expensive*! I chose Hirose DF13 & DF3 connectors as Digikey provides
pre-crimped wires/terminals in various lengths/colors -- much better
than the >$1000 crimper.
There are some lower-cost aftermarket/universal crimpers that can
crimp a handful of other-brand terminals, but I've never found a
definitive cross-reference on those. Similarly some crimpers for a
specific brand/model of terminal may crimp another brand/model of
terminal, but I've found no way to know for sure unless I buy/try.
Cheers,
-Neil.
Quoting David <
lists@...>:
> On 19/02/2012 22:18, Bob Ammerman wrote:
>> This looks suspiciously like the connector that matches a NIMH battery pack
>> that several of us got for free several years ago through the PIC list. If
>> they match then I have a bunch (100+?) of the male connector (right angle
>> mount tho') and a whole large (20KG+) box of battery packs with the matching
>> connector on them.
>
> Out of interest if these were not available, it is easy enough to crimp
> them?
>
> Any recommendations for good crimpers would be gladly received, thus far
> I've relied on 0.1" 2xN headers with ribbon cable but those sorts of SIL
> headers are much nicer.
>
> David
> --
>
http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
>
http://mailman.mit.edu/mailman/listinfo/piclist>
--
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
