« Return to Thread: Audio Problem

Re: Audio Problem

by Svacha :: Rate this Message:

Reply to Author | View in Thread

Thanks for your help.  Turns out it was a sensitivity issue.

Mic is turned up and I am monitoring silence level -- everything is working great.

Thanks again!


Dominick Accattato-2 wrote:
Yeah, it sounds like a hardware issue.  I don't believe it's Red5, you could
try it with Red5 0.8 as well, but this problem didn't exist in 0.7 either.



On Tue, Jul 7, 2009 at 10:17 AM, Svacha <sketisculpter@yahoo.com> wrote:

>
> The steps I am taking are I launch the app, press record and grant access
> to
> the microphone.  I then test by reading a paragraph from a book.  When I am
> done, I press stop and check the flv.  Sometimes the flv is 0kb, other
> times
> the audio seems to cut out pieces -- as if the recording paused and then
> unpaused after 10 seconds or so.
>
> I am going to check mic sensitivity -- shouldn't be an issue here, as well
> as if the wrong mic is being selected by the flashplayer -- another issues
> I
> doubt is occuring.
>
> Thanks!
>
>
> You can try the following:
>
> 1. speak directly in the mic and wait 30 seconds.  Check the file size and
> you will notice that it does not show 0kb.
> 2. start the application but do not make a noise.  Wait 30 seconds.  The
> file size will be 0kb.
>
> Flash doesn't send any data until it hears the first bit of audio.  Let me
> know if you find similar results.
>
> --
> View this message in context:
> http://www.nabble.com/Audio-Problem-tp24363897p24374005.html
> Sent from the Red5 - English mailing list archive at Nabble.com.
>
>
> _______________________________________________
> Red5 mailing list
> Red5@osflash.org
> http://osflash.org/mailman/listinfo/red5_osflash.org
>

_______________________________________________
Red5 mailing list
Red5@osflash.org
http://osflash.org/mailman/listinfo/red5_osflash.org

 « Return to Thread: Audio Problem