« Return to Thread: Cisco 7975G and XML options for G722
Re: Cisco 7975G and XML options for G722
by Brian West-3
::
Rate this Message:
Cisco 7970 and the G.722 codecThe G.722 codec is disabled by default
on the 7970G phone.
- To enable the G722 codec, add the following line inside of the
<vendorConfig> context:
<g722CodecSupport>2</g722CodecSupport>
- Add the following line within the <device> context:
<advertiseG722Codec>1</advertiseG722Codec>
On a config generated by CUCM 6, the 'advertiseG722Codec' context
usually appears on a new line following the <encrConfig /> context.
- It is also useful to add the following lines inside of the
<vendorConfig> context, but these are purely optional:
<headsetWidebandUIControl>0</headsetWidebandUIControl>
<handsetWidebandUIControl>0</handsetWidebandUIControl>
<headsetWidebandEnable>0</headsetWidebandEnable>
<handsetWidebandEnable>1</handsetWidebandEnable>
From voip-info.
/b
On Feb 1, 2009, at 12:03 PM, peder@... wrote:
> I have an xml config file for the 79x1, but there is no mention of
> wideband and/or g722. I found a doc on CCO that says that the 7941
> and
> 7961 support g722 for sccp and sip, so if you find some xml that
> mentions g722, I would appreciate seeing it as I have a couple of
> those
> phones. I know there is a "<preferredCodec></preferredCodec>"
> entry, so
> maybe you just add it there like on the 79x0 versions
> 'preferred_codec:
> "g729"'.
>
> Peder
>
>
> Brian West wrote:
>> I found it finally. Now if I had the full XML I could pick apart
>> for
>> all the options that would help too.
>>
>> /b
>>
>> On Jan 31, 2009, at 11:15 PM, Ron McCarthy wrote:
>>
>>> Wow, can't even find the tech doc via my CCO login even. Gotta love
>>> Cisco and the support for SIP...
>>>
>>> Probably have to find someone with CCM and look at a config that CCM
>>> made up, as that should have it if they enabled for the phone.
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users@...
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
> '
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users@...
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@...
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
on the 7970G phone.
- To enable the G722 codec, add the following line inside of the
<vendorConfig> context:
<g722CodecSupport>2</g722CodecSupport>
- Add the following line within the <device> context:
<advertiseG722Codec>1</advertiseG722Codec>
On a config generated by CUCM 6, the 'advertiseG722Codec' context
usually appears on a new line following the <encrConfig /> context.
- It is also useful to add the following lines inside of the
<vendorConfig> context, but these are purely optional:
<headsetWidebandUIControl>0</headsetWidebandUIControl>
<handsetWidebandUIControl>0</handsetWidebandUIControl>
<headsetWidebandEnable>0</headsetWidebandEnable>
<handsetWidebandEnable>1</handsetWidebandEnable>
From voip-info.
/b
On Feb 1, 2009, at 12:03 PM, peder@... wrote:
> I have an xml config file for the 79x1, but there is no mention of
> wideband and/or g722. I found a doc on CCO that says that the 7941
> and
> 7961 support g722 for sccp and sip, so if you find some xml that
> mentions g722, I would appreciate seeing it as I have a couple of
> those
> phones. I know there is a "<preferredCodec></preferredCodec>"
> entry, so
> maybe you just add it there like on the 79x0 versions
> 'preferred_codec:
> "g729"'.
>
> Peder
>
>
> Brian West wrote:
>> I found it finally. Now if I had the full XML I could pick apart
>> for
>> all the options that would help too.
>>
>> /b
>>
>> On Jan 31, 2009, at 11:15 PM, Ron McCarthy wrote:
>>
>>> Wow, can't even find the tech doc via my CCO login even. Gotta love
>>> Cisco and the support for SIP...
>>>
>>> Probably have to find someone with CCM and look at a config that CCM
>>> made up, as that should have it if they enabled for the phone.
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users@...
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
> '
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users@...
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@...
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
« Return to Thread: Cisco 7975G and XML options for G722
| Free embeddable forum powered by Nabble | Forum Help |
