---- Bart Bunting <
bart@...> wrote:
> Hi,
>
>
>
> I've managed to get a few x-10 modules made by EON3. Unfortunately the
> computer module didn't come with the cable so I can't actually use them as
> yet.
>
>
>
> I was wondering if anyone knew what the pinouts for the cable is so I can
> make one up.
>
>
Per
http://software.x10.com/pub/manuals/cm11a_protocol.txtCable connections:
Signal DB9 Connector RJ11 Connector
SIN Pin 2 Pin 1
SOUT Pin 3 Pin 3
GND Pin 5 Pin 4
RI Pin 9 Pin 2
where: SIN Serial input to PC (output from the interface)
SOUT Serial output from PC (input to the interface)
GND Signal ground
RI Ring signal (input to PC)
>
> It appears to be a rj11 plug which I assume goes to a 9 pin serial
> connector.
The plug for the CM11A end is the smaller modular handset connector, not the
regular size RJ11 telephone plug.
Regards,
Charles Sullivan
>
>
>
> Any info would be appreciated.
>
>
>
> Regards
>
>
>
> Bart
>
>
>
------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, &
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
Group, R/GA, & Big Spaceship.
http://p.sf.net/sfu/creativitycat-com
________________________________________________________
To unsubscribe from this list, go to:
http://sourceforge.net/mail/?group_id=1365
