|
»
»
« Return to Thread: Elevated pano help
Re: Elevated pano help
by Roger Berry
::
Rate this Message:
Try something like this Impact Heavy Duty Light Stand.
Here's the link showing it a B&H Photo.
http://tinyurl.com/stand22
You could also rent one that's bigger and stronger if needed.
The clamp on the lowest section I would leave loose and clamp a clamp above it after extending the tube, this way it would be free to rotate with your camera on top.
Roger Berry
http://IndiaVRtours.com
>
>
> On Jun 30, 2009, at 22:54, Sacha Griffin wrote:
>
> >
> >
> > You can use the cherry picker just shoot out of one side and move
> > the cherry
> > picker around your nadir.
> >
> > I've done this with a fork lift to success.
> >
> > Sacha Griffin
> >
> > Southern Digital Solutions LLC
> >
> > http://www.southern-digital.com
> >
> > http://www.seeit360.net
> >
> > GMAIL IM: sachagriffin007@...
> >
> > 404-551-4275
> >
> > From: PanoToolsNG@...
> > [mailto:PanoToolsNG@...] On
> > Behalf Of Robert Slade
> > Sent: Tuesday, June 30, 2009 3:39 PM
> > To: PanoToolsNG@...
> > Subject: [PanoToolsNG] Elevated pano help
> >
> > Hello,
> >
> > I've been requested to create a 360x180 virtual tour of a factory
> > assembly area. It consists of rows of desks where workers sit and
> > assemble electronic components. From ground level, all of the desks
> > are
> > at the same height. The best viewpoint will be three or four metres
> > above the ground.
> >
> > I thought about a pole pano, but the factory is not well lit. Would
> > the
> > pole be steady enough to support a heavy camera with a slow shutter
> > speed?
> >
> > A cherry picker would have a guard rail which would interfere with the
> > image.
> >
> > A scaffold platform at that height would be too dangerous to stand on
> > without any safety rails.
> >
> > I'd be grateful for any suggestions!
> >
> > Regards,
> > Robert
> >
> > --
> > Robert Slade, Photographer
> > Manor Photography 07890 564889
> > http://www.manor-photography.com
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Here's the link showing it a B&H Photo.
http://tinyurl.com/stand22
You could also rent one that's bigger and stronger if needed.
The clamp on the lowest section I would leave loose and clamp a clamp above it after extending the tube, this way it would be free to rotate with your camera on top.
Roger Berry
http://IndiaVRtours.com
>
>
> On Jun 30, 2009, at 22:54, Sacha Griffin wrote:
>
> >
> >
> > You can use the cherry picker just shoot out of one side and move
> > the cherry
> > picker around your nadir.
> >
> > I've done this with a fork lift to success.
> >
> > Sacha Griffin
> >
> > Southern Digital Solutions LLC
> >
> > http://www.southern-digital.com
> >
> > http://www.seeit360.net
> >
> > GMAIL IM: sachagriffin007@...
> >
> > 404-551-4275
> >
> > From: PanoToolsNG@...
> > [mailto:PanoToolsNG@...] On
> > Behalf Of Robert Slade
> > Sent: Tuesday, June 30, 2009 3:39 PM
> > To: PanoToolsNG@...
> > Subject: [PanoToolsNG] Elevated pano help
> >
> > Hello,
> >
> > I've been requested to create a 360x180 virtual tour of a factory
> > assembly area. It consists of rows of desks where workers sit and
> > assemble electronic components. From ground level, all of the desks
> > are
> > at the same height. The best viewpoint will be three or four metres
> > above the ground.
> >
> > I thought about a pole pano, but the factory is not well lit. Would
> > the
> > pole be steady enough to support a heavy camera with a slow shutter
> > speed?
> >
> > A cherry picker would have a guard rail which would interfere with the
> > image.
> >
> > A scaffold platform at that height would be too dangerous to stand on
> > without any safety rails.
> >
> > I'd be grateful for any suggestions!
> >
> > Regards,
> > Robert
> >
> > --
> > Robert Slade, Photographer
> > Manor Photography 07890 564889
> > http://www.manor-photography.com
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
« Return to Thread: Elevated pano help
| Free embeddable forum powered by Nabble | Forum Help |
