|
»
« Return to Thread: Elevated pano help
Re: Elevated pano help
by robertsladeuk
::
Rate this Message:
Thanks all for the help on this. I've made a 3m pole from a lighting
stand and a centre column tripod. It has a very stable base with the
tripod legs spread, but the top sways around a lot and takes a long time
(minutes) to settle down.
It will be fine for indoor use with no breeze. But outdoors could be
more of a problem! Any hints on how to dampen down the swaying?
Many thanks,
Robert
--
Sacha Griffin wrote:
> You can use the cherry picker just shoot out of one side and move the cherry
> picker around your nadir.
>
> I've done this with a fork lift to success.
>
>
>
>
>
> Sacha Griffin
>
> Southern Digital Solutions LLC
>
> http://www.southern-digital.com
>
> http://www.seeit360.net
>
> GMAIL IM: sachagriffin007@...
>
> 404-551-4275
>
>
>
>
>
>
>
> From: PanoToolsNG@... [mailto:PanoToolsNG@...] On
> Behalf Of Robert Slade
> Sent: Tuesday, June 30, 2009 3:39 PM
> To: PanoToolsNG@...
> Subject: [PanoToolsNG] Elevated pano help
>
>
>
>
>
>
>
>
> Hello,
>
> I've been requested to create a 360x180 virtual tour of a factory
> assembly area. It consists of rows of desks where workers sit and
> assemble electronic components. From ground level, all of the desks are
> at the same height. The best viewpoint will be three or four metres
> above the ground.
>
> I thought about a pole pano, but the factory is not well lit. Would the
> pole be steady enough to support a heavy camera with a slow shutter speed?
>
> A cherry picker would have a guard rail which would interfere with the
> image.
>
> A scaffold platform at that height would be too dangerous to stand on
> without any safety rails.
>
> I'd be grateful for any suggestions!
>
> Regards,
> Robert
>
--
Robert Slade, Photographer
Manor Photography 07890 564889
http://www.manor-photography.com
stand and a centre column tripod. It has a very stable base with the
tripod legs spread, but the top sways around a lot and takes a long time
(minutes) to settle down.
It will be fine for indoor use with no breeze. But outdoors could be
more of a problem! Any hints on how to dampen down the swaying?
Many thanks,
Robert
--
Sacha Griffin wrote:
> You can use the cherry picker just shoot out of one side and move the cherry
> picker around your nadir.
>
> I've done this with a fork lift to success.
>
>
>
>
>
> Sacha Griffin
>
> Southern Digital Solutions LLC
>
> http://www.southern-digital.com
>
> http://www.seeit360.net
>
> GMAIL IM: sachagriffin007@...
>
> 404-551-4275
>
>
>
>
>
>
>
> From: PanoToolsNG@... [mailto:PanoToolsNG@...] On
> Behalf Of Robert Slade
> Sent: Tuesday, June 30, 2009 3:39 PM
> To: PanoToolsNG@...
> Subject: [PanoToolsNG] Elevated pano help
>
>
>
>
>
>
>
>
> Hello,
>
> I've been requested to create a 360x180 virtual tour of a factory
> assembly area. It consists of rows of desks where workers sit and
> assemble electronic components. From ground level, all of the desks are
> at the same height. The best viewpoint will be three or four metres
> above the ground.
>
> I thought about a pole pano, but the factory is not well lit. Would the
> pole be steady enough to support a heavy camera with a slow shutter speed?
>
> A cherry picker would have a guard rail which would interfere with the
> image.
>
> A scaffold platform at that height would be too dangerous to stand on
> without any safety rails.
>
> I'd be grateful for any suggestions!
>
> Regards,
> Robert
>
--
Robert Slade, Photographer
Manor Photography 07890 564889
http://www.manor-photography.com
« Return to Thread: Elevated pano help
| Free embeddable forum powered by Nabble | Forum Help |
