Peter Eckhoff wrote:
> Hello EVDL,
>
> We are recabling a Fiero and we want to do it right.
>
> What is the proper motor cabling sequence for a Fiero with a GE Series
> motor and a Curtis controller (e.g. B+ on Curtis to A1 on motor, A2 on
> Motor to S? on motor, etc.)?
It's a standard series wound motor, right? A1 A2 S1 S2?
Is there any reason it shouldn't be wired in the conventional way one
wires all series-wound motors... Jumper one of the A's to one of the
S's. Connect B+ and B- to the remaining terminals. Then swap S1 and
S2 if the motor runs the wrong direction.
And correct me if I'm wrong, if the motor doesn't have interpoles, it's
optimized to spin in one direction efficiently. You had to get that
right at the time of physical installation. You can't correct it by
swapping wires... right?
Robert
_______________________________________________
General EVDL support:
http://evdl.org/help/Usage guidelines:
http://evdl.org/help/index.html#convArchives:
http://evdl.org/archive/Subscription options:
http://lists.sjsu.edu/mailman/listinfo/ev
