Nicolas Boullis schrieb:
> On Thu, Apr 17, 2008 at 10:11:15AM -0700, Jan Willies wrote:
>
>> **** Card model ****
>>
>> Identified model: unknown
>>
>
> That's part of the bad news: your card was not recognized, so it was not
> autoconfigured.
>
> Autoconfiguration is still far from being perfect.
>
> A way to improve it might be to understand a little more about the
> content of the on-board EEPROM chip; for this I need some results from
> experiences using the Windows driver...
>
It's a headless machine with only linux installed :/
>> **** Detected data ****
>>
>> PCI revision: 2
>> Chip revision: 2
>> Video encoder: ADV7175A at address 0x6a on EM8300 I2C bus 1
>> read_register(0x1c08) = 0x01
>>
>
> The second point is that the driver apparently could not read the
> on-board EEPROM's contents...
>
> I remember someone telling me about such a problem; was that you?
>
Nope that wasn't me. But not reading from EEPROM surely doesn't sound
good...
> This certainly needs some investigation. the first question is: is there
> that EEPROM chip? Do you have a hi-res picture of the components side of
> your board?
sure:
http://jan.willies.info/dxr3- Jan
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone_______________________________________________
Dxr3-devel mailing list
Dxr3-devel@...
https://lists.sourceforge.net/lists/listinfo/dxr3-devel
