« Return to Thread: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild

Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild

by René Rebe :: Rate this Message:

It arrived on the list multiple times and I already answered it
(why do you think it did not arrive?), to re-paste my answer:

> ah sorry, I have not yet fixed dietlibc (and thus embutils) for
> ARM EABI. Just deselect dietlibc and embutils. You'll usually
> not need them on the BeagleBoard.
>
> (in theory I could even upload the 2GB 1500 package T2 build
> that lives on my Beagle rev-B, ... if I just had a minute to
> polish it some more, ...)
>
> Anyway: just enable the expert option section, enable custom
> package selection and add the rules:
>
> O dietlibc
> O embutils
>
> Alternatively you could fix dietlibc for ARM EABI.
>

Yours,

4tm@... wrote:

> Hallo René,
>
> ich versuche seit Do. letzter Woche diese Nachricht zu posten.
> Leider kommt diese nicht an!
> Mache ich etwas falsch?
>
> Viele Grüße,
> ToM
>
> -------- Original-Nachricht --------
> Datum: Fri, 17 Apr 2009 11:54:14 +0200
> Von: 4tm@...
> An: t2@...
> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild
>
> Hello René,
>
> first I had the idea to run the t2-arm in a QEMU.
> Last week I got my beagleboard REV C2 ;-)
> So fist I have to learn to handle it.
> I play around with the angstrom-distribution *sorry* ;-)
>
> Now I want to built a T2 for beagle and run into an error:
>
> - Target Distribution
> (generic) Generic System
> (minimal) Minimalistic package selection
> (none) Just create binary packages and isofs.txt
>
> - Architecture, CPU and Optimization
> (arm) ARM (Advanced RISC Machines)
> (el) Build for little endian machines
> (cortex-a8) cortex-a8 CPU
> (gnueabi) GNU EABI
> [ ] Generate code using the 16bit thumb instruction set
> [*] This is a cross-build between architectures
>
>
> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk].
> -> Preparing configuration to build this package with dietlibc (statically).
> -> Reading package config: package/base/dietlibc/dietlibc.conf
> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm
> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out
> !> `bin-x86_64/diet-i' -> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue
> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet'
> !> `bin-x86_64/diet-dyn-i' -> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-
> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn'
> !> Running make CC=arm-t2-linux-gnueabi-gcc CPP=arm-t2-linux-gnueabi-cpp CXX=a
> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc docdir=/usr/dietlibc/doc/dietli ..
> !> You should not call uname during the build!
> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc -Os -fomit-fra
> me-pointer -fstrict-aliasing -mhard-float -Wall -W -Wchar-subscripts -Wmissi ..
> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP
> !> Due to previous errors, no 1-dietlibc.log file!
> !> (Try enabling xtrace in the config to track an error inside the build
> system.)
> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err
> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc.
>
>
> After #./scripts/Cleanup I get some warnings!
>
> Searching for lingering temp/backup files (this may take some time) ...
> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old
> WARNING: Found package/./contrib/rtai/.rtai_config
> WARNING: Found package/./contrib/rtai/.rtai_config_comedi
>
> Pleas can you guide me how to do this?
>
>> You'll also have to add the -omap linux kernel fork for the board
>> support (as I had no time, yet, to do so).
>>
>
> Greetings,
> ToM
>
>

--
René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
http://exactcode.de | http://t2-project.org | http://rene.rebe.name

-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
lists@... with a subject of: unsubscribe t2

« Return to Thread: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild