|
Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild
|
View:
New views
4 Messages
—
Rating Filter:
Alert me
|
 |
|
|
|
Re: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild
by tom4tom
::
Rate this Message:
Hello René,
I don't know what's going on with the list! I got only your post from today. >> Anyway: just enable the expert option section, enable custom >> package selection and add the rules: >> O dietlibc >> O embutils It brings nothing new? Greetings, ToM Zitat von René Rebe <rene@...>: > > It arrived on the list multiple times and I already answered it > (why do you think it did not arrive?), to re-paste my answer: > >> ah sorry, I have not yet fixed dietlibc (and thus embutils) for >> ARM EABI. Just deselect dietlibc and embutils. You'll usually >> not need them on the BeagleBoard. >> >> (in theory I could even upload the 2GB 1500 package T2 build >> that lives on my Beagle rev-B, ... if I just had a minute to >> polish it some more, ...) >> >> Anyway: just enable the expert option section, enable custom >> package selection and add the rules: >> >> O dietlibc >> O embutils >> >> Alternatively you could fix dietlibc for ARM EABI. >> > > Yours, > > 4tm@... wrote: >> Hallo René, >> >> ich versuche seit Do. letzter Woche diese Nachricht zu posten. >> Leider kommt diese nicht an! >> Mache ich etwas falsch? >> >> Viele Grüße, >> ToM >> >> -------- Original-Nachricht -------- >> Datum: Fri, 17 Apr 2009 11:54:14 +0200 >> Von: 4tm@... >> An: t2@... >> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild >> >> Hello René, >> >> first I had the idea to run the t2-arm in a QEMU. >> Last week I got my beagleboard REV C2 ;-) >> So fist I have to learn to handle it. >> I play around with the angstrom-distribution *sorry* ;-) >> >> Now I want to built a T2 for beagle and run into an error: >> >> - Target Distribution >> (generic) Generic System >> (minimal) Minimalistic package selection >> (none) Just create binary packages and isofs.txt >> >> - Architecture, CPU and Optimization >> (arm) ARM (Advanced RISC Machines) >> (el) Build for little endian machines >> (cortex-a8) cortex-a8 CPU >> (gnueabi) GNU EABI >> [ ] Generate code using the 16bit thumb instruction set >> [*] This is a cross-build between architectures >> >> >> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk]. >> -> Preparing configuration to build this package with dietlibc (statically). >> -> Reading package config: package/base/dietlibc/dietlibc.conf >> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm >> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out >> !> `bin-x86_64/diet-i' -> >> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue >> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet' >> !> `bin-x86_64/diet-dyn-i' -> >> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm- >> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn' >> !> Running make CC=arm-t2-linux-gnueabi-gcc >> CPP=arm-t2-linux-gnueabi-cpp CXX=a >> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc >> docdir=/usr/dietlibc/doc/dietli .. >> !> You should not call uname during the build! >> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc -Os >> -fomit-fra >> me-pointer -fstrict-aliasing -mhard-float -Wall -W >> -Wchar-subscripts -Wmissi .. >> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP >> !> Due to previous errors, no 1-dietlibc.log file! >> !> (Try enabling xtrace in the config to track an error inside the >> build system.) >> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err >> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc. >> >> >> After #./scripts/Cleanup I get some warnings! >> >> Searching for lingering temp/backup files (this may take some time) ... >> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old >> WARNING: Found package/./contrib/rtai/.rtai_config >> WARNING: Found package/./contrib/rtai/.rtai_config_comedi >> >> Pleas can you guide me how to do this? >> >>> You'll also have to add the -omap linux kernel fork for the board >>> support (as I had no time, yet, to do so). >>> >> >> Greetings, >> ToM ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2 |
|
|
Re: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild
by René Rebe
::
Rate this Message:
ToM wrote: > Hello René, > > I don't know what's going on with the list! > I got only your post from today. ? >>> Anyway: just enable the expert option section, enable custom >>> package selection and add the rules: >>> O dietlibc >>> O embutils > > It brings nothing new? What do you mean? > Greetings, > ToM > > Zitat von René Rebe <rene@...>: > >> >> It arrived on the list multiple times and I already answered it >> (why do you think it did not arrive?), to re-paste my answer: >> >>> ah sorry, I have not yet fixed dietlibc (and thus embutils) for >>> ARM EABI. Just deselect dietlibc and embutils. You'll usually >>> not need them on the BeagleBoard. >>> >>> (in theory I could even upload the 2GB 1500 package T2 build >>> that lives on my Beagle rev-B, ... if I just had a minute to >>> polish it some more, ...) >>> >>> Anyway: just enable the expert option section, enable custom >>> package selection and add the rules: >>> >>> O dietlibc >>> O embutils >>> >>> Alternatively you could fix dietlibc for ARM EABI. >>> >> >> Yours, >> >> 4tm@... wrote: >>> Hallo René, >>> >>> ich versuche seit Do. letzter Woche diese Nachricht zu posten. >>> Leider kommt diese nicht an! >>> Mache ich etwas falsch? >>> >>> Viele Grüße, >>> ToM >>> >>> -------- Original-Nachricht -------- >>> Datum: Fri, 17 Apr 2009 11:54:14 +0200 >>> Von: 4tm@... >>> An: t2@... >>> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild >>> >>> Hello René, >>> >>> first I had the idea to run the t2-arm in a QEMU. >>> Last week I got my beagleboard REV C2 ;-) >>> So fist I have to learn to handle it. >>> I play around with the angstrom-distribution *sorry* ;-) >>> >>> Now I want to built a T2 for beagle and run into an error: >>> >>> - Target Distribution >>> (generic) Generic System >>> (minimal) Minimalistic package selection >>> (none) Just create binary packages and isofs.txt >>> >>> - Architecture, CPU and Optimization >>> (arm) ARM (Advanced RISC Machines) >>> (el) Build for little endian machines >>> (cortex-a8) cortex-a8 CPU >>> (gnueabi) GNU EABI >>> [ ] Generate code using the 16bit thumb instruction set >>> [*] This is a cross-build between architectures >>> >>> >>> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk]. >>> -> Preparing configuration to build this package with dietlibc >>> (statically). >>> -> Reading package config: package/base/dietlibc/dietlibc.conf >>> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm >>> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out >>> !> `bin-x86_64/diet-i' -> >>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue >>> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet' >>> !> `bin-x86_64/diet-dyn-i' -> >>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm- >>> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn' >>> !> Running make CC=arm-t2-linux-gnueabi-gcc >>> CPP=arm-t2-linux-gnueabi-cpp CXX=a >>> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc >>> docdir=/usr/dietlibc/doc/dietli .. >>> !> You should not call uname during the build! >>> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc -Os >>> -fomit-fra >>> me-pointer -fstrict-aliasing -mhard-float -Wall -W >>> -Wchar-subscripts -Wmissi .. >>> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP >>> !> Due to previous errors, no 1-dietlibc.log file! >>> !> (Try enabling xtrace in the config to track an error inside the >>> build system.) >>> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err >>> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc. >>> >>> >>> After #./scripts/Cleanup I get some warnings! >>> >>> Searching for lingering temp/backup files (this may take some time) ... >>> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old >>> WARNING: Found package/./contrib/rtai/.rtai_config >>> WARNING: Found package/./contrib/rtai/.rtai_config_comedi >>> >>> Pleas can you guide me how to do this? >>> >>>> You'll also have to add the -omap linux kernel fork for the board >>>> support (as I had no time, yet, to do so). >>>> >>> >>> Greetings, >>> ToM > -- René Rebe - ExactCODE GmbH - Europe, Germany, Berlin http://exactcode.de | http://t2-project.org | http://rene.rebe.name ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2 |
|
|
Re: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild
by tom4tom
::
Rate this Message:
I get the same error after adding the rules reported below.
> ToM wrote: >> Hello René, >> >> I don't know what's going on with the list! >> I got only your post from today. > ? >>>> Anyway: just enable the expert option section, enable custom >>>> package selection and add the rules: >>>> O dietlibc >>>> O embutils >> >> It brings nothing new? > What do you mean? > >> Greetings, >> ToM >> >> Zitat von René Rebe <rene@...>: >> >>> >>> It arrived on the list multiple times and I already answered it >>> (why do you think it did not arrive?), to re-paste my answer: >>> >>>> ah sorry, I have not yet fixed dietlibc (and thus embutils) for >>>> ARM EABI. Just deselect dietlibc and embutils. You'll usually >>>> not need them on the BeagleBoard. >>>> >>>> (in theory I could even upload the 2GB 1500 package T2 build >>>> that lives on my Beagle rev-B, ... if I just had a minute to >>>> polish it some more, ...) >>>> >>>> Anyway: just enable the expert option section, enable custom >>>> package selection and add the rules: >>>> >>>> O dietlibc >>>> O embutils >>>> >>>> Alternatively you could fix dietlibc for ARM EABI. >>>> >>> >>> Yours, >>> >>> 4tm@... wrote: >>>> Hallo René, >>>> >>>> ich versuche seit Do. letzter Woche diese Nachricht zu posten. >>>> Leider kommt diese nicht an! >>>> Mache ich etwas falsch? >>>> >>>> Viele Grüße, >>>> ToM >>>> >>>> -------- Original-Nachricht -------- >>>> Datum: Fri, 17 Apr 2009 11:54:14 +0200 >>>> Von: 4tm@... >>>> An: t2@... >>>> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild >>>> >>>> Hello René, >>>> >>>> first I had the idea to run the t2-arm in a QEMU. >>>> Last week I got my beagleboard REV C2 ;-) >>>> So fist I have to learn to handle it. >>>> I play around with the angstrom-distribution *sorry* ;-) >>>> >>>> Now I want to built a T2 for beagle and run into an error: >>>> >>>> - Target Distribution >>>> (generic) Generic System >>>> (minimal) Minimalistic package selection >>>> (none) Just create binary packages and isofs.txt >>>> >>>> - Architecture, CPU and Optimization >>>> (arm) ARM (Advanced RISC Machines) >>>> (el) Build for little endian machines >>>> (cortex-a8) cortex-a8 CPU >>>> (gnueabi) GNU EABI >>>> [ ] Generate code using the 16bit thumb instruction set >>>> [*] This is a cross-build between architectures >>>> >>>> >>>> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk]. >>>> -> Preparing configuration to build this package with dietlibc >>>> (statically). >>>> -> Reading package config: package/base/dietlibc/dietlibc.conf >>>> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm >>>> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out >>>> !> `bin-x86_64/diet-i' -> >>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue >>>> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet' >>>> !> `bin-x86_64/diet-dyn-i' -> >>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm- >>>> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn' >>>> !> Running make CC=arm-t2-linux-gnueabi-gcc >>>> CPP=arm-t2-linux-gnueabi-cpp CXX=a >>>> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc >>>> docdir=/usr/dietlibc/doc/dietli .. >>>> !> You should not call uname during the build! >>>> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc >>>> -Os -fomit-fra >>>> me-pointer -fstrict-aliasing -mhard-float -Wall -W >>>> -Wchar-subscripts -Wmissi .. >>>> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP >>>> !> Due to previous errors, no 1-dietlibc.log file! >>>> !> (Try enabling xtrace in the config to track an error inside >>>> the build system.) >>>> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err >>>> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc. >>>> >>>> >>>> After #./scripts/Cleanup I get some warnings! >>>> >>>> Searching for lingering temp/backup files (this may take some time) ... >>>> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old >>>> WARNING: Found package/./contrib/rtai/.rtai_config >>>> WARNING: Found package/./contrib/rtai/.rtai_config_comedi >>>> >>>> Pleas can you guide me how to do this? >>>> >>>>> You'll also have to add the -omap linux kernel fork for the board >>>>> support (as I had no time, yet, to do so). >>>>> >>>> >>>> Greetings, >>>> ToM >> > > > -- > René Rebe - ExactCODE GmbH - Europe, Germany, Berlin > http://exactcode.de | http://t2-project.org | http://rene.rebe.name ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to lists@... with a subject of: unsubscribe t2 |
| Free embeddable forum powered by Nabble | Forum Help |
