|
« Return to Thread: Help Needed: PVR-350: Kernel 3.1.4: lircd 0.9.0-pre1: Debian unstable
Re: Help Needed: PVR-350: Kernel 3.1.4: lircd 0.9.0-pre1: Debian unstable
by Paul Check-3
::
Rate this Message:
> Am Mittwoch 04 April 2012 schrieb Paul Check:
>> > Am Montag 02 April 2012 schrieb Paul Check:
>> >> Hi: I am having difficulty getting my pvr-350 to work, but I *am*
>> >> getting
>> >> some results. Much appreciated if someone can help me across the
>> line
>> >> :).
>> >>
>> >> Debian unstable, kernel is 3.1.4, lircd is 0.9.0-pre1.
>> >>
>> >> I have followed the howto at the LIRC wiki here:
>> >>
>> >> http://www.mythtv.org/wiki/LIRC#Debian_Wheezy_amd64_Hauppauge_PVR_350
>> >>
>> >> When I run irw I am not getting any results, but when I run evtest I
>> am
>> >> seeing the button presses. Any ideas on what could be broken? The
> fact
>> >> that evtest is running means that I do have devinput working properly
>> >> with
>> >> lirc, right? I just don't know what else is missing to connect to
>> irw
>> >> (and also mythtv).
>> >>
>> >> Regards, Paul
>> >>
>> >>
>> >>
>> >>
>> >
> ------------------------------------------------------------------------------
>> >> This SF email is sponsosred by:
>> >> Try Windows Azure free for 90 days Click Here
>> >> http://p.sf.net/sfu/sfd2d-msazure
>> >>
>> > I'm running Wheezy with kernel 3.2.0 and lirc 0.9.0-0ubuntu1 ;-)
>> >
>> > Your /etc/lirc/hardware.conf should contain a line:
>> > REMOTE_MODULES="ir-kbd-i2c lirc_dev"
>>
>> Are those kernel modules? I was under the impression that 3.1.4 didn't
>> have those modules any more.
> Yes, kernel modules and I would believe that you need drivers :-)
>> > Am Montag 02 April 2012 schrieb Paul Check:
>> >> Hi: I am having difficulty getting my pvr-350 to work, but I *am*
>> >> getting
>> >> some results. Much appreciated if someone can help me across the
>> line
>> >> :).
>> >>
>> >> Debian unstable, kernel is 3.1.4, lircd is 0.9.0-pre1.
>> >>
>> >> I have followed the howto at the LIRC wiki here:
>> >>
>> >> http://www.mythtv.org/wiki/LIRC#Debian_Wheezy_amd64_Hauppauge_PVR_350
>> >>
>> >> When I run irw I am not getting any results, but when I run evtest I
>> am
>> >> seeing the button presses. Any ideas on what could be broken? The
> fact
>> >> that evtest is running means that I do have devinput working properly
>> >> with
>> >> lirc, right? I just don't know what else is missing to connect to
>> irw
>> >> (and also mythtv).
>> >>
>> >> Regards, Paul
>> >>
>> >>
>> >>
>> >>
>> >
> ------------------------------------------------------------------------------
>> >> This SF email is sponsosred by:
>> >> Try Windows Azure free for 90 days Click Here
>> >> http://p.sf.net/sfu/sfd2d-msazure
>> >>
>> > I'm running Wheezy with kernel 3.2.0 and lirc 0.9.0-0ubuntu1 ;-)
>> >
>> > Your /etc/lirc/hardware.conf should contain a line:
>> > REMOTE_MODULES="ir-kbd-i2c lirc_dev"
>>
>> Are those kernel modules? I was under the impression that 3.1.4 didn't
>> have those modules any more.
> Yes, kernel modules and I would believe that you need drivers :-)
I don't see those modules in 3.1.4. Do you know what section they are in?
>> Also, I'm not using the "REMOTE" prefix. I've attached my
>> hardware.conf.
>>
>> So, given that evtest is working but irw is not, is that indicating some
>> type of problem with "ir-kbd"?
>>
>> If anyone else is running Debian unstable against a 3.1 kernel and has a
>> pvr-350 working, I'd really love to see the various conf files, key
>> mappings, etc. I'm still stuck.
>>
>> Regards, Paul
>
> I will attach my config files:
> /etc/lirc/hardware.conf
> /etc/udev/rules.d/10-local.rules
> /var/lib/mythtv/.mythtv/lircrc
> /etc/lirc/lircd.conf is a copy from
> /usr/share/lirc/remotes/devinput/lircd.conf.devinput
Thx. Again, I can see that the remote is being picked up by evtest. I
believe I solved at least a bit of the problem, in that the keymap table
was empty, so I was just getting SCAN codes when I ran evtest. After
inserting a keymap table I'm able to get KEY codes on evtest, but still
nothing with irw. I'm assuming this must be because I'm missing the
ir-kbd module...but I just don't see it.
I'd be happy to contribute a detailed write-up if I could get this working
:). -P
------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
« Return to Thread: Help Needed: PVR-350: Kernel 3.1.4: lircd 0.9.0-pre1: Debian unstable
| Free embeddable forum powered by Nabble | Forum Help |
