Mine does the same on boot. When you first power it the two lights on the front side by the power connector come on then go out. look at the mother board on the other side, it should have a green light on, on it. If it does not try re seating it and test again. It takes about 30 seconds to a minute for it to bring up a display on the LCD. Also have you hooked up the consol port to a computer to see it it is booting on there? If it doesn't maybe someone else has more info on testing it.
Feng Qian-3 wrote:
Hi,
I just received a Palo43 and LCD. I connected an Overo Air methodboard on
the Palo board, and connected power to Palo. A red and green light near the
power connector flashed once, then went off. LCD seems powered on, I see
lights on the side, but no signals. The Overo board has the light on too.
Do I need to something extra to make the board boot?
Cheers,
Feng
------------------------------------------------------------------------------
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users
