Re: Jack2 Issue - 2nd Part

> Hi guys,
>  i'm trying the latest version of Jack 1.9.2. The server starts  
> normally:
>
> p, li { white-space: pre-wrap; }
> 20:13:58.608 JACK is starting...
> 20:13:58.609 /usr/local/bin/jackd -R -P89 -t1000 -m -dalsa -r44100 -
> p128 -n3 -D -Chw:0,1 -Phw:0,0 -Xseq -H -M
> jackdmp 1.9.2
> Copyright 2001-2005 Paul Davis and others.
> Copyright 2004-2008 Grame.
> jackdmp comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> JACK server starting in realtime mode with priority 89
> 20:13:58.636 JACK was started with PID=4712.
> Acquire audio card Audio0
> Failed to acquire device name : Audio0 error : Input/output error
> Error playback audio device hw:0,0 cannot be acquired, trying to  
> open it anyway...
> creating alsa driver ... hw:0,0|hw:0,1|128|3|44100|0|0|hwmon|
> hwmeter|-|32bit
> Using ALSA driver USB-Audio running on M-Audio FastTrack Pro at  
> usb-0000:00:1d.1-1, full speed
> configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 3  
> periods
> ALSA: final selected sample format for capture: 16bit little-endian
> ALSA: use 3 periods for capture
> ALSA: final selected sample format for playback: 16bit little-endian
> ALSA: use 3 periods for playback
> 20:13:58.672 ALSA connection graph change.
> port created: Midi-Through:midi/playback_1
> port created: Midi-Through:midi/capture_1
> port created: FastTrack-Pro:midi/playback_1
> port created: FastTrack-Pro:midi/capture_1
> port created: TiMidity:midi/capture_1
> port created: TiMidity:midi/capture_2
> port created: TiMidity:midi/capture_3
> port created: TiMidity:midi/capture_4
> alsa_driver_xrun_recovery
> JackAudioDriver::ProcessAsync: read error, skip cycle
> 20:14:00.665 Server configuration saved to "/home/marco/.jackdrc".
> 20:14:00.668 Statistics reset.
> 20:14:00.689 Client activated.
> 20:14:00.727 JACK connection change.
>
> But when i use it with other programs (vsthost, lv2rack, jackrack,  
> qsynth...), i get xrun like this:
> JackEngine::XRun: client = Wine_ASIO_Jack_Client was not run: state  
> = 2
> JackAudioDriver::ProcessAsync Process error
> 20:18:15.852 XRUN callback (1).
> Is it a known problem? It depends on hardware or software i'm  
> using? Bad installation?
>
> Thanks as always!
>
> Marco
>